Related
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to ICS STOCK LPQ.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
EDIT:
Ok.
So usb jig arrived this morning. Ripped it open. Popped my sgsII from charger (fully charged I think!) took battery out - 15 secs
placed battery back in.
Inserted USBJIG. . .
. . .
. . . . BLACK SCREEN OF DEATH
Nothing....Still the same. No screen activity...sad...
only way is either JTAG or Samsung service center right?
I used to have yellow exclamation mark + 4 counts....but they can't see anything so they won't know right?
or did the usbJig work but just the fact that I can't see anything on the screen??
...sad I hated seeing noobs flashing phones improperly and crying when it got softbricked....well even though mine is a straight hardbrick i still feel sad....noob
update.
I've taken it to SSCentre on tuesday. I called them yesterday and they said they couldn't fix it over there and had it shipped somewhere else...is that bad?
it could take upto 2 weeks!!!!!!
I rememeber the engineers working on my friends Galaxy S last year and they didn't have to send it to somewhere else. (he had the soft brick 3 yellow logo icons) and didn't have the version where the download/recovery mode didn't work) The engineer just flashed it with latest stock sgs firmware (ignoring that csc was orange lol)
Maybe my flash was so impeccable I fried the motherboard? I'm one kick ass bricker....
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
I'm assuming download mode and recovery also don't work when the device is powered off?
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
Hmm have you tried getting into download mode to see if the device shows up in odin?
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
If you can get into download mode then there is still hope. If you can't then your only option is either warranty repair of Jtag service. If download mode then works then just reflash using Odin.
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
hiepgia said:
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
Click to expand...
Click to collapse
Didn't even notice that XXJVU was an i9000 firmware.
To OP: Yup nothing to do, but send it in for repairs.
yeah sorry not JVU LPQ (I was getting mixed up with firmwares)
Yeah phone not going into download or recovery mode.
I think when I press the power button the phone does turn on but I get nothing but black screen....(the phone warms up)
So shall I order a JTAG to flash? or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment..... so worried!
dk206 said:
yeah sorry not JVU LPQ (I was getting mixed up with firmwares)
Yeah phone not going into download or recovery mode.
I think when I press the power button the phone does turn on but I get nothing but black screen....(the phone warms up)
So shall I order a JTAG to flash? or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment..... so worried!
Click to expand...
Click to collapse
Are u sure?
vol down+power+home button is download mode
Check it once again if it doesn't work...
maybe u can try some usb-jigg ?!
so you can come in to download-mode and then flash with odin =(
dk206 said:
ye
So shall I order a JTAG to flash?
JTag is not Samsung warranty its a paid for service .
or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment....
.
Warranty is void with custom rom root or rom counter above zero .
Will they know yes counter is on 4 .
Will they ignore it and put it through as warranty they may but dont count on it .
USB jig would be the starting point .
That fails you could go to warranty repair if thats rejected then pay for JTag repair .
jjue
Click to expand...
Click to collapse
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
dk206 said:
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
Click to expand...
Click to collapse
eBay. Or Google.
first charge it. Then try to enter download mode again. I have exp. 1 time battery low and phone just warm up and black screen. After Charge, it's ok till now!
dk206 said:
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
Click to expand...
Click to collapse
Read the post USB jigs to loan out
http://forum.xda-developers.com/showthread.php?t=1495867
jje
if you have adb maybe you could try:
1. Connecting your device to PC while turned off,
2. CMD > adb devices
* If you see your device connected, proceed with:
adb reboot recovery or adb reboot bootloader
* If you don't see any device connected, try googling for qhsusb_dload driver for your device, and after you install them (and maybe a couple of PC restarts) repeat step 2
3. if you manage to get to recovery, i hope you have your nandroid backup so you could restore them.
my HTC sensation 4G had this situation few days ago, couldn't go to recovery/bootloader, blanked out when turned on and had fever
i fixed it using those steps, i wish i could remember where i got the qhsusb driver thingy from.. i'll let you know when i remember.
edit: it might work on S2, or might not.. i don't know this will help or not, but you could read adb/fastboot/bootloader/android 101, maybe you could get something from there
hiepgia said:
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
Click to expand...
Click to collapse
The bootloader death thing is not 100% true. When I first got my phone, (when there wasn't any rom for it) I tried flashing a I9000 rom. I was so stupid and luckily it didn't break my phone. After the flashing it turned on and stayed on bootlogo.
It was a miracle for me!
Ok.
So usb jig arrived this morning. Ripped it open. Popped my sgsII from charger (fully charged I think!) took battery out - 15 secs
placed battery back in.
Inserted USBJIG. . .
. . .
. . . . BLACK SCREEN OF DEATH
Nothing....Still the same. No screen activity...sad...
only way is either JTAG or Samsung service center right?
I used to have yellow exclamation mark + 4 counts....but they can't see anything so they won't know right?
or did the usbJig work but just the fact that I can't see anything on the screen??
...sad I hated seeing noobs flashing phones improperly and crying when it got softbricked....well even though mine is a straight hardbrick i still feel sad....noob
You just got to hope for the guy that repairs it not to see or not to care about custom roms etc .
jje
JJEgan said:
You just got to hope for the guy that repairs it not to see or not to care about custom roms etc .
jje
Click to expand...
Click to collapse
Ok update.
I've taken it to SSCentre on tuesday. I called them yesterday and they said they couldn't fix it over there and had it shipped somewhere else...is that bad?
it could take upto 2 weeks!!!!!!
I rememeber the engineers working on my friends Galaxy S last year and they didn't have to send it to somewhere else. (he had the soft brick 3 yellow logo icons) and didn't have the version where the download/recovery mode didn't work) The engineer just flashed it with latest stock sgs firmware (ignoring that csc was orange lol)
Maybe my flash was so impeccable I fried the motherboard? I'm one kick ass bricker....
you should have tried download mode blindly first. as i have flashed once blindly and it fixed my all dead screen.
hello guys
I tried to flash i new firmware v10e but it failed and the program kdz updater ends the process then i unplugged it from the computer the emergency mode screen is what on the screen I released the battery then put it again Then I want to start up the phone holding power button doesn't wake up my died phone Can I do any thing for solve this problem or should I go to lg center (Is root break the warranty???)
Please Help me to find any home-made solution without going to lg supporting center
Quickly please i want my phone
hemo-ali said:
hello guys
I tried to flash i new firmware v10e but it failed and the program kdz updater ends the process then i unplugged it from the computer the emergency mode screen is what on the screen I released the battery then put it again Then I want to start up the phone holding power button doesn't wake up my died phone Can I do any thing for solve this problem or should I go to lg center (Is root break the warranty???)
Please Help me to find any home-made solution without going to lg supporting center
Quickly please i want my phone
Click to expand...
Click to collapse
Never ever plug out battery in emergency mode.... it hard bricks the phone....
I assume that u r not a mobile hardware engineer so there is no home made solution for it...
if ur device is still under warranty.. take it service center n say that the phone died while updating lg firmware... they will replace the pcb then
Sent from my LG-P500 using Tapatalk 2 Beta-3
hemo-ali said:
hello guys
I tried to flash i new firmware v10e but it failed and the program kdz updater ends the process then i unplugged it from the computer the emergency mode screen is what on the screen I released the battery then put it again Then I want to start up the phone holding power button doesn't wake up my died phone Can I do any thing for solve this problem or should I go to lg center (Is root break the warranty???)
Please Help me to find any home-made solution without going to lg supporting center
Quickly please i want my phone
Click to expand...
Click to collapse
Have you tried reflashing with kdz, but using another firmware? Maybe you used a wrong one.
EDIT : i missed the part where you said it died. My bad.
fundoozzz said:
Never ever plug out battery in emergency mode.... it hard bricks the phone....
I assume that u r not a mobile hardware engineer so there is no home made solution for it...
if ur device is still under warranty.. take it service center n say that the phone died while updating lg firmware... they will replace the pcb then
Sent from my LG-P500 using Tapatalk 2 Beta-3
Click to expand...
Click to collapse
Are you sure that this operation doesn't break the warranty????
And I can't replace pcb by my self???
And how many days they want to do replacing operation??
Thank you
just don't tell them that your phone was rooted.
say that you were updating firmware via LG Support Tool and then the installation stucked.
hemo-ali said:
Are you sure that this operation doesn't break the warranty????
And I can't replace pcb by my self???
And how many days they want to do replacing operation??
Thank you
Click to expand...
Click to collapse
this does void warrant but who knows that u rooted it when it will not even boot up.... do the thing the other guy said just above this post...
n I guess u don't like to mess up with your phone by trying to replace things by yourself... good luck..
and no. of days they will take depends on the availability of pcb with the service center..
Sent from my LG-P500 using Tapatalk 2 Beta-3
Solution is only one..let bring it to LG SC if phone is unresponsive is easy for them to change pcb without controling if you make root or not..they don't cares about it..
But be sure that your phone is out of control it means that you can't be able to turn on..and is still off!..
I know it because one time I had flashed recovery through mobile data and was wrong way..phone died and after 4 days I had have my mobile back from SC..
Okay First thing is to give the phone to lg support center and don't tell them that was rooted before that I should ensure that the phone is dead
okay I will do that today thnx all and wait for my feedback
are you tried hard reset after using kdz because my friend faced same problem after using kdz but after hard reset my friend phone work like new
you can do hard reset using
try this
Remove battery, replace battery Press Volume Down + Call + Power button. Release Power button when you see LG logo but hold the other two unless you see new screen
go the optimus me group you will find what you want for optimus me and you will get fast support then xda
https://www.facebook.com/groups/185645224876840/
Not working
hemo-ali said:
Not working
Click to expand...
Click to collapse
then you have only that already posted take your phone to lg sc
I think that the only Services Center can help you,... unfortunately.
Wait is PCB a part of the internal phone electronic panel??? or it's files in someplace in the phone????
hemo-ali said:
Wait is PCB a part of the internal phone electronic panel??? or it's files in someplace in the phone????
Click to expand...
Click to collapse
You better take your phone to the service centre.
Okay I understand that i don't understand anything
Oomahey said:
You better take your phone to the service centre.
Click to expand...
Click to collapse
But why I shouldn't know&understand ??
hemo-ali said:
But why I shouldn't know&understand ??
Click to expand...
Click to collapse
Google PCB. Its sort of a motherboard for your phone...
So it's a hardware
every phone has his own one??
hemo-ali said:
hello guys
I tried to flash i new firmware v10e but it failed and the program kdz updater ends the process then i unplugged it from the computer the emergency mode screen is what on the screen I released the battery then put it again Then I want to start up the phone holding power button doesn't wake up my died phone Can I do any thing for solve this problem or should I go to lg center (Is root break the warranty???)
Please Help me to find any home-made solution without going to lg supporting center
Quickly please i want my phone
Click to expand...
Click to collapse
Using octopus box or RIFF box to repair boot. It's OK! I'll try and everything work.
I use them or lg support center use them??
And if I can use them how??
Hy guys.I need your help in this problem: yesterday i was trying to flash back my stock firmware on the i9100 with odin.preveiously i had ressurection remix.i've got the files from sammobile,am put the them in odin 1.82.all went well until i got stuck on Do not remove target and above said set partiton.I've tried to reflash again so i unpleged the phone,reset odin,and restarted the phone by removing and puting back the battery.
after this the phone won't turn on.i can't enter downloade mode.before getting the error on odin,the phone was in downloade mode for aprox. 30 min,and had the battery fully charged.shoul'd i try with a nother battery.i'm in Roumania and may carrier is Orange Romania,I my town i don't have acces to a usb jig if that is the solution.So please help me.
Dumix05 said:
Hy guys.I need your help in this problem: yesterday i was trying to flash back my stock firmware on the i9100 with odin.preveiously i had ressurection remix.i've got the files from sammobile,am put the them in odin 1.82.all went well until i got stuck on Do not remove target and above said set partiton.I've tried to reflash again so i unpleged the phone,reset odin,and restarted the phone by removing and puting back the battery.
after this the phone won't turn on.i can't enter downloade mode.before getting the error on odin,the phone was in downloade mode for aprox. 30 min,and had the battery fully charged.shoul'd i try with a nother battery.i'm in Roumania and may carrier is Orange Romania,I my town i don't have acces to a usb jig if that is the solution.So please help me.
Click to expand...
Click to collapse
The phone would have restarted on its own after flashing. y did u pull out battery when it was written do not disconnect target?
1st of all, you did not have proper files i suppose, always read complete history on whatever u do with ur phone.
Now u have probably corrupted the eMMC chip which means the motherboard should be replaced.
even a Jig can not help u in this case. the best solution will be, if its still in warranty, get it replaced.
answer
ctg60000 said:
The phone would have restarted on its own after flashing. y did u pull out battery when it was written do not disconnect target?
1st of all, you did not have proper files i suppose, always read complete history on whatever u do with ur phone.
Now u have probably corrupted the eMMC chip which means the motherboard should be replaced.
even a Jig can not help u in this case. the best solution will be, if its still in warranty, get it replaced.
Click to expand...
Click to collapse
Odin reached the following message: http://forum.xda-developers.com/showthread.php?t=1858836 .First i unpluged the usb cable and pluged it again,but this time windows 7 told me that the usb isn't working,so i tried a different usb but the same problem,so i decided to unplug the cable again,restart the pc,and remove the battery and put it back again and the rest of the problems begain.I used odin 1.82 with pit file 512,and the the firmware was from sammobile 2.3.6 open europe.Now i can seem how to figure this one out.Above this messages was only set partition,but it wouldn't pass it,i left the for 20-30 minutes.on the phone's screen it was just the usual message you get when you are in downloade mode.the was no other message or a blue line suggesting that the files were being written.
Dumix05 said:
Odin reached the following message: http://forum.xda-developers.com/showthread.php?t=1858836 .First i unpluged the usb cable and pluged it again,but this time windows 7 told me that the usb isn't working,so i tried a different usb but the same problem,so i decided to unplug the cable again,restart the pc,and remove the battery and put it back again and the rest of the problems begain.I used odin 1.82 with pit file 512,and the the firmware was from sammobile 2.3.6 open europe.Now i can seem how to figure this one out.Above this messages was only set partition,but it wouldn't pass it,i left the for 20-30 minutes.on the phone's screen it was just the usual message you get when you are in downloade mode.the was no other message or a blue line suggesting that the files were being written.
Click to expand...
Click to collapse
k... when u keep it on charging, does the battery symbol appear on screen?
ctg60000 said:
k... when u keep it on charging, does the battery symbol appear on screen?
Click to expand...
Click to collapse
No.The screen won't turn un.I went to a service now and they said that it can be fixed with a JTAG,because i maight have damaged the boot.They never heard of usb jig.Can you please tell me how to fix it without ther help ? because they want me to pay 30 dollars.
Dumix05 said:
No.The screen won't turn un.I went to a service now and they said that it can be fixed with a JTAG,because i maight have damaged the boot.They never heard of usb jig.Can you please tell me how to fix it without ther help ? because they want me to pay 30 dollars.
Click to expand...
Click to collapse
If you cant afford 30 dollars I would recommend you get a job or ask Mom for more pocket money.
Alternatively read the other threads here that already discuss this type of exact subject and save yourself some time waiting for answers.
Dumix05 said:
No.The screen won't turn un.I went to a service now and they said that it can be fixed with a JTAG,because i maight have damaged the boot.They never heard of usb jig.Can you please tell me how to fix it without ther help ? because they want me to pay 30 dollars.
Click to expand...
Click to collapse
if its not showing any life of power, then jtag is of no use. but since they told u it can be done in $30, then u should go for it.
$30 is worth it, u cant jtag urself, its a tough process. u can check out 'mobiletechvideos' on youtube. they hav showed jtag procedure, which requires microsoldering. & a riffbox/similar jtag device (which is again costly).
Hi,
Need solution here? Can I ask one of my friend's GrandQuattro is being hard bricked yesterday. Do I need to repair it at Service Center or maybe just with laptop?
Because, this phone can't power on into recovery or bootloader. Now it's dead. Can it will revive back if sent it to Service Center?
USB JIG are helping android phones enter into bootloader?
Thanks,
Syah
RevolutionBolt said:
Hi,
Need solution here? Can I ask one of my friend's GrandQuattro is being hard bricked yesterday. Do I need to repair it at Service Center or maybe just with laptop?
Because, this phone can't power on into recovery or bootloader. Now it's dead. Can it will revive back if sent it to Service Center?
USB JIG are helping android phones enter into bootloader?
Thanks,
Syah
Click to expand...
Click to collapse
Well go to service center, i myself hard bricked my quattro :angel: while doing some kernel and **** .I used the classic one I went to service center & told them i was updating my phone using kies and suddenly light went out(I don't have UPS) they bought :laugh::laugh:
and yeah one thing are you sure that its hard bricked cuZ one day when i was porting rom the device went into bootloop cwm and i forget about it went to sleep then next day it was dead with no reaction at all so it might happen.can u tell me how did it happended
lols21.10 said:
Well go to service center, i myself hard bricked my quattro :angel: while doing some kernel and **** .I used the classic one I went to service center & told them i was updating my phone using kies and suddenly light went out(I don't have UPS) they bought :laugh::laugh:
and yeah one thing are you sure that its hard bricked cuZ one day when i was porting rom the device went into bootloop cwm and i forget about it went to sleep then next day it was dead with no reaction at all so it might happen.can u tell me how did it happended
Click to expand...
Click to collapse
As you have told this, "i forget about it went to sleep then next day it was dead with no reaction at all so it might happen".
My friend said his got like your's too. It mean don't configure too much and phone maybe will dead with no reaction or something.
RevolutionBolt said:
As you have told this, "i forget about it went to sleep then next day it was dead with no reaction at all so it might happen".
My friend said his got like your's too. It mean don't configure too much and phone maybe will dead with no reaction or something.
Click to expand...
Click to collapse
If its same suitation as mine than pull everything out of the phone(battery,sim,sd ......) than put that back in and let it charge for an hour(even if it does not show charging) than try to go into cwm if not than wait for another hour and do the same it solved mine :laugh::laugh:.
Install stock rom
remove evrything if you got right drivers it should be added in odin just re flas the stock rom of your region
my phone is moto e . i installed new stock rom of 4.4.2 and i downloaded the update of 4.4.4 and it was installing . and later within 1 min i see .it got switched off and it doesnot even turn on .i tried press vol down power button boot menu is not appears . my pc detects the phene but fastboot is say waiting for device. when i put charging and try to turn it on .the light blinks 2 times and goes off .but did not switch on till now . please help me
Hi
Thanks for writing to us at XDA Assist. Do you have the 2014 model and or 2015 model?
timmaaa said:
Hi
Thanks for writing to us at XDA Assist. Do you have the 2014 model and or 2015 model?
Click to expand...
Click to collapse
2014 model xt1022. is this battary dead problem?
I'll let the Moto E experts answer that for you. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your specific device forum here (bookmark/subscribe this):
Motorola Moto E
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
Moto E Q&A, Help & Troubleshooting
Good luck!
Transmitted via Bacon
Does your phone boot into fastboot mode ?? The mode from where you enter recovery. If it enters fastboot mode, then the problem is not a major one. You can flash a stock 4.4.4. If otherwise, then I think that's a quite serious problem. Cause, if fastboot doesn't show up , then probably your phone is hard bricked and you need to show it to the Service centre people !
Looks like you hard bricked your device. If you can go into the fastboot/bootloader screen in the phone, them no problem. Just flashing the 4.4.4 rom should be enough. If you can't, you have hard bricked your device. This happens because the bootloader was updated by Motorola and downgrading leads to bricking.
chaithanya0207 said:
my phone is moto e . i installed new stock rom of 4.4.2 and i downloaded the update of 4.4.4 and it was installing . and later within 1 min i see .it got switched off and it doesnot even turn on .i tried press vol down power button boot menu is not appears . my pc detects the phene but fastboot is say waiting for device. when i put charging and try to turn it on .the light blinks 2 times and goes off .but did not switch on till now . please help me
Click to expand...
Click to collapse
LOL....take ur phone to the service center and tell them it won't turn on
.... Take ur phone's invoice (a printed copy of Flipkart's PDF invoice) with u and maybe ur phone,'s box also..... They'll replace ur phone's motherboard for free.... Some of us got ours replaced that way.... But u gotta wait...... In expecting mine back by coming Tuesday
dem0nicbl00d said:
LOL....take ur phone to the service center and tell them it won't turn on
.... Take ur phone's invoice (a printed copy of Flipkart's PDF invoice) with u and maybe ur phone,'s box also..... They'll replace ur phone's motherboard for free.... Some of us got ours replaced that way.... But u gotta wait...... In expecting mine back by coming Tuesday
Click to expand...
Click to collapse
they replace even unlocked phone? if not how much cost for motherboard in rupees. or i should wait until .mbm files release for moto e.
chaithanya0207 said:
they replace even unlocked phone? if not how much cost for motherboard in rupees. or i should wait until .mbm files release for moto e.
Click to expand...
Click to collapse
They dunno u unlocked... And don't tell them urself...... Submit it to them and ull get ur phone back in approx 9 days
dem0nicbl00d said:
They dunno u unlocked... And don't tell them urself...... Submit it to them and ull get ur phone back in approx 9 days
Click to expand...
Click to collapse
Oficial info:
What Will Motorola Do?
If a covered defect or damage arises and a valid warranty claim is received within the applicable Warranty
Period, Motorola, at its sole option, unless otherwise required by applicable law, will either (1) repair, at no
charge, the defect or damage using new, used or reconditioned/refurbished functionally equivalent replacement
parts; or (2) exchange the Product with a replacement Product that is new or which has been
reconditioned/refurbished or otherwise remanufactured from new or used parts and is functionally equivalent to
the original Product; or (3) refund the purchase price ofany Products covered by the terms and conditions of
this Limited Warranty. Products, parts and supporting documentation provided to Motorola as part of the warranty process, shall
become the property of Motorola, and may not be returned. When a replacement or refund is given, the Product
for which the replacement or refund is provided must be returned to Motorola and shall become the property of
Motorola.
chaithanya0207 said:
Oficial info:
What Will Motorola Do?
If a covered defect or damage arises and a valid warranty claim is received within the applicable Warranty
Period, Motorola, at its sole option, unless otherwise required by applicable law, will either (1) repair, at no
charge, the defect or damage using new, used or reconditioned/refurbished functionally equivalent replacement
parts; or (2) exchange the Product with a replacement Product that is new or which has been
reconditioned/refurbished or otherwise remanufactured from new or used parts and is functionally equivalent to
the original Product; or (3) refund the purchase price ofany Products covered by the terms and conditions of
this Limited Warranty. Products, parts and supporting documentation provided to Motorola as part of the warranty process, shall
become the property of Motorola, and may not be returned. When a replacement or refund is given, the Product
for which the replacement or refund is provided must be returned to Motorola and shall become the property of
Motorola.
Click to expand...
Click to collapse
Dude........ Do it if u want ur phone back...... @nilanko got his mobo replaced and I got a call from them telling me my phone's ready...... If u r okay with ur phone being a nice little paperweight, then it's up to u
dem0nicbl00d said:
Dude........ Do it if u want ur phone back...... @nilanko got his mobo replaced and I got a call from them telling me my phone's ready...... If u r okay with ur phone being a nice little paperweight, then it's up to u
Click to expand...
Click to collapse
Can i update to 5.0.2 (when full update released not soak test) if they replace mobo? Which update method we should follow OTA or mfastboot.exe?
chaithanya0207 said:
Can i update to 5.0.2 (when full update released not soak test) if they replace mobo? Which update method we should follow OTA or mfastboot.exe?
Click to expand...
Click to collapse
Soak test and final rollout are the same........And yes, u can...........Whichever method u want
dem0nicbl00d said:
Soak test and final rollout are the same........And yes, u can...........Whichever method u want
Click to expand...
Click to collapse
They are agree to change mobo but he said it will take 20 days time. Thank you FYI.
chaithanya0207 said:
They are agree to change mobo but he said it will take 20 days time. Thank you FYI.
Click to expand...
Click to collapse
Ull get earlier....Don't worry......
dem0nicbl00d said:
Ull get earlier....Don't worry......
Click to expand...
Click to collapse
Got my Moto E today with fully working.
Moto e wont boot up
Same Here, After downgrade from v5.0.2 to v4.4.2 I was trying to update v4.4.4 at apx. 50% process Screen goes blank & Wont bootup.