i tried flashing a new rom on my leo but now no matter what i have tried i cant get passed "stick togather"
i have tried many a radio and rom but no luck can someone please help me
Insufficent details for response
Please provide following:
Type phone :
Which Rom :
Which Radio Rom:
Which (H)SPL:
If possible contents of bootloader screen:
Related
Hi there,
Although a frequent reader, this i my first post and I NEED YOUR HELP.
Total loser that i am i accidently run the HimaClearJumpCode.exe on my himalaya instead of the HimaGetDeviceData.exe. And as you stated in another topic: (Warning: DO NOT under any circumstances copy and run HimaClearJumpCode.exe on your device as it will render it unbootable. It is used by the upgrade utility to put you device into bootloader mode prior to upgrading.)
I am now properly F*CKED, please help!!!!!!!!! (if there is a way out of this...) Please also note i do not have the proper country id code to install a new ROM ( Orange Netherlands), which is what started this mess.
Humbly hoping for your help...
Arnout
[email protected]
msn: [email protected]
fixed!
thanxs to evert-999 (thanxs, mate!!!!!) i was able to overcome the country id error and install wm2k5. After this everything works again!!!
Only thing weird is i still get a windows mobile 2003 screen when i reboot...does everybody have this?
ba bootloader serial v2.06
I suffered the same. so u have company.
Ifailed in my upgrade on my ba from radio rom v1.12 to v1.13. my ba got stucked in the bootloader mode in the course of upgrading.I cannot secure the ppc data. I have to downgrade it from rom v1.40 to v1.31 to FREE it b4 I upgrade back to rom v1.40 again with radio rom v1.12 I tried twice and the same thing occured. for the time being I have to be contented with my v1.40 and radio rom v1.12.
any insight on where I went wrong?
Stuck in bootloader
I GOT THE SAME PROBLEM-STUNK IN BOOTLOADER...WT CAN I DO??
IS IT GOING TO UPDATE THE ROM?? BUT GOT ANOTHER PROBLEM WHEN I UPDATE IT IN STEP 1 - ERASING THE ROM...STUCK AGAIN...THEN IT SAY ERROR 112.......
I REALLY NEED HELP...
ANYONE CAN HELP ME, PLz email me.....?
thx..
AKELA
[email protected]
hi every 1 ...
here is the situation i'm in:
Each time I tried to upgrade my HTC Touch Dual with another Radio(like 1.71 or 1.65) ,i prosed with the operation but it did not complete for an error on 100%!! then my phone was stuck on the three colors Screen with some words:'Upgrade ROM code error Please try again'
RUU_ERROR_226 FLASH WRITE
But It semms allright when I managed to upgrade a ROM without radio...
Please help me ....
Regards.
P.S. three colors Screen with following words:
RUUNBH
NIKI100
SPL-1.22.Hard
CPLD-4
Upgrade ROM code error
Please try again
Serial(or USB)
I upgrade a Chinese version ROM.... And everything is okay now.....
so strange.....
Hi,
I just flashed my HTC 7500 with SPL 1.2 by installing AthenaWrapper which went through successfully. After upgradation , I flashed the ROM with SPL3.5_R6.5_B3_WM6.5_B21198.rar which also got installed successfully with no errors at all. However after installation , when the HTC was starting , it is just stuck at white screen and does not go ahead at all. I have tried all things including hard reset , but the phone does not come out of the white screen.
Can someone please help URGENTLY ? have I missed something during the installation ? How can I get the unit to boot atleast . In the bootloader screen , the SPL does show as 1.2.
Kindly help please ???
Thank you.
superlifer said:
Hi,
I just flashed my HTC 7500 with SPL 1.2 by installing AthenaWrapper which went through successfully. After upgradation , I flashed the ROM with SPL3.5_R6.5_B3_WM6.5_B21198.rar which also got installed successfully with no errors at all. However after installation , when the HTC was starting , it is just stuck at white screen and does not go ahead at all. I have tried all things including hard reset , but the phone does not come out of the white screen.
Can someone please help URGENTLY ? have I missed something during the installation ? How can I get the unit to boot atleast . In the bootloader screen , the SPL does show as 1.2.
Kindly help please ???
Thank you.
Click to expand...
Click to collapse
Hi there,
You have answered your own question. you up graded to spl1.2 and then flashed with an spl3.5 rom. you should have flashed an spl 1.2 rom. To use an spl 3.5 rom you need to upgrade again with AP4.0 rom that has the upgrade built in. there is no other way of doing it.
Now you will have to fix your athena with THIS HELPread from post 33onwards, and please read the athena WIKI.
Best of luck
Jay
Hello Jay,
Thanks for your quick reply. How do I get the Athena connected to my PC now ? I can't connect it through Activesync as it does not boot and is in white screen. Also I tried to put it in boot loader mode and then run the updater.exe but it displays a 'Timeout message ' whether the device is coonected and that Active sync is running ?
Can I install 1.2 ROM if that's possible ? If yes , can you let me know which ROM with SPL 1.2 ver can work ? I am just worried now as my Athena may be completely dead and I can't use it.
Can you help ? Thanks once again.
Hi Jay , Folks,
I am writing the codes that I see when I put Athena in bootloader mode :
[email protected])
IPL-v1.00
[email protected]$)
SPL-v1.20.Olipro
From this info , can it be fixed ? Please help
Thanks
Hi superlifer
welcome to the joys of flashing!
Jay has given you a solution to your problem.
Guess what!
You are not the first person to make the mistake you have made and it is documented in several places.
Jay pointed you to the specific post that will fix your problem but he also mentioned you should read the wiki.
i will add to this that you should also read the sticky threads at the top of this forum which include "the beginners guide to upgrading the ROM"
and another thread titled "How to FIX INVALID MODEL ID after bad flashing"
You have corrupted the radio by trying to flash an SPL3.5 ROM onto a phone formatted for SPL1.2.
These roms are different sizes and it wont fit, leading to the unintended consequence.
As I said in the beginners guide , you can flash from bootloader(the 3 coloured screen"
I hope all new owners read this thread and the others I mentioned as it will help prevent the angst you are feeling.
regards lakeman
Hello Jay, Lakeman, Cmonex,
Absolutely brilliant !!
My Athena is breathing again and is out of the dead white screen. I followed the steps to fix the model id and wifi (from CMonex ) and was able to overwrite the model id successfully. I then flashed it with ROM WM6.1 MULTILANG R6.1 MiChY which also got installed successfully. On bootloader screen it now shows as:
ATHE100
IPL-v1.00
ATHE100
SPL-v1.20.Olipro
Many thanks first of all to you all and your timely reponses and perfect guidance.
I just want to know now which is the best stable SPL1.2 ROM now which i can install. I want to install 1.2 ROM with HTC Plugin and the big Digital clock and also which will have GPS. My previous ROM had QuickGPS which doesn't seem to be there now and is there way I could get it back. How can I use GPS on Athena.
Apologies as this device is completely new to me i am still getting used to its functions by reading lot of articles and WIKI for this model.
I am scared to put SPL3.5 as I might break something again. My donation is on its way.
Cheers
Just update to the 3.5 spl much much easier that way instead of waiting for anyone to backport their stuff to the 1.2 spl
I tried to flash rom wm 6.1 edition but suddenly when flashıng was %80, its broke and failure.
Now my phone broke only htc pic came.Please some one help.I read all the post about it.I cant master reset on my phone because when i push the 0 button htc pic came again.Only bootloader mode can works but ı try many than 10 roms it starts but when they are %5-4 ,they broke too.Then this type came "İmage file corrupted and please check update utiltiy"
I read at one blog if this situtaion came i must use smartflip stock rom to flash but i cant find imateclub's web site is broke too.
Here is the smartflip official rom http://rapid share.com/files/307222427/i-mate_smartflip_WWE_1.2.301.2_ship.exe
check my post about gold card method, and then you could flash with your official rom
Hello everyone
i got similar problem too. it can restart the phone but goes to all white screen.
i even tried over 15 Roms to reinstall it but it all got failed.
Here is my phone video below
http://www.youtube.com/watch?v=W9h91HWdkvA
Please give me some help.
Thank you so much
someone had told because i have IPL 1.02 & SPL 1.02 but with WM6 above system.
i need to re flash phone to IPL 2.00 & SPL 2.00, BUT .....How to do it ?
Please help!!
Thanks
read my post about gold card method. i had the same problem and recoverd my phone. good luck
I was trying to follow instructions here: http://forum.xda-developers.com/showthread.php?t=395945 to unlock my phone, I got as far as flashing the radio but at 95% done.. it failed. I have tried taking the battery out, hard resetting the phone but now whenever I go to flash the radio with 1.00.000.0 (in the instructions above) or my original radio 1.58.16.27 - it gets to the percentage screen and just hangs on 0%, then the ROM update utility says its failed. I've well and truly messed it up - when using the ROM update utility it's blank under current image version now and whenever I power on the phone it's always on the following boot screen:
NIKI200
SPL-1.16.0000
CPLD-4
I just can't do anything with it, help!!
Any help is much appreciated! Thanks
Try to flash the original rom
Have tried this, it does the same thing.. just hangs
Read this thread http://forum.xda-developers.com/showthread.php?t=390606
Thanks for your help, MTTY sorted this