Im trying to update my TMOUS hd2 to radio 2.15.50.14 for VBNROM
Im updating radio via bootloader and it freezes at 96% Can anyone help me?
Thanks
i think it should freeze for like a 30 sec
I am having the same issues, nothing after 10 minutes, still at 96%.
xxljmzlxx said:
Im trying to update my TMOUS hd2 to radio 2.15.50.14 for VBNROM
Im updating radio via bootloader and it freezes at 96% Can anyone help me?
Thanks
Click to expand...
Click to collapse
ricenoodle said:
I am having the same issues, nothing after 10 minutes, still at 96%.
Click to expand...
Click to collapse
Are you guys flashing via ActiveSync/WMDC or are you flashing via bootloader?
I recomend always manualy putting your phone into bootloader and then flasbing.
Related
Hi ,
while I had upgrading only radio to 1.38 the process has interrupted
I had removed the battery and the tytn start but at boot no gms appears instead the radio version then it freezes on windows startup.
I need to reflash the radio firmware but I can do that from active sync.
i have bl 1.04 can anyone help me?
thank you very much
have you install Hard-SPL ?
Ah the curse strikes again... get reading here.... http://forum.xda-developers.com/showthread.php?t=286755
Though post #467 may be of particular interest to you.
sorry for the delay in my response.
i have tried to read all the post about bricked tytn.
Then I have tried to use the kilt methid but my device show a blank screen after the attach. I wait more than 30 minutes after that but without result, so I think this way is not good for me.
Anyway I have use the hard spl 1,10 for the radio upgrade.
I can boot in bootloader spl 1.04 so I hope this a good thing
any ideas?
Thanks
juggero said:
sorry for the delay in my response.
i have tried to read all the post about bricked tytn.
Then I have tried to use the kilt methid but my device show a blank screen after the attach. I wait more than 30 minutes after that but without result, so I think this way is not good for me.
Anyway I have use the hard spl 1,10 for the radio upgrade.
I can boot in bootloader spl 1.04 so I hope this a good thing
any ideas?
Thanks
Click to expand...
Click to collapse
yeah, get a regular RUU for your device, an *official* one and update with it.
if you have SPL 1.10.Oli already flashed on the phone, there is something better we can do... but clearly it sounds like you haven't
Olipro said:
yeah, get a regular RUU for your device, an *official* one and update with it.
Click to expand...
Click to collapse
will not work, 'cos he has SPL 1.04 and htc_boot 0108 (as he was flashing 1.38 radio), so he needs 1.09 to reflash the radio.
I'm closing this thread, as I see juggero has already posted in the right place.
This is really making me mad! Ok so I downloaded Round 4 Reloaded off Scott's website and everything worked fine until when it was flashing- it stops before 1% and says "there had been a connection error..." Everything works fine with my phone and it is syncing properly so I don't know what the deal is!! Please help me!
what SPL and radio are you running?
maybe try flashing via the SD card method
radio and spl version would help.
Exactly how do I do the SD card method- I don't want to screw anything up??? BTW< I have reinstalled Active Sync and Hard- Reseted my phone a couple of times with no luck at all.
still need to know what Roms have you ever install and your current SPL and radio rom version..
ROM: 3.56.651.0 (WWE) Radio Version: 3.42.02
dogw/mogul said:
ROM: 3.56.651.0 (WWE) Radio Version: 3.42.02
Click to expand...
Click to collapse
ahh .. seem like your phone is still lock .. you need to unlock your phone first..
load HARD-SPL2.40 .. then install the rom..
check this thread for info.. works for both Verizon and sprint phones ..
http://forum.xda-developers.com/showthread.php?t=472805
I can't even load Hard-SPL- it shows error 262!! HELP
Please help me before i literally trash and slam my phone on the pavement this is so stupid and pathetic because people won't help me!! :-( please help me!
dogw/mogul said:
I can't even load Hard-SPL- it shows error 262!! HELP
Click to expand...
Click to collapse
did you run hard-spl from the .bat file or from the ruu util?
Please stop flooding the forum. No one wants to help you when you're just being annoying.
Yes, I ran it from the RUU and it won't fricken work HELP HELP HELP!!!
dogw/mogul said:
Yes, I ran it from the RUU and it won't fricken work HELP HELP HELP!!!
Click to expand...
Click to collapse
wow you still having issues? whats the latest issue?
ok.. let's start at square 1..
right now.. what screen is the phone on? i have a feeling you need to run the exit bootloader application that's in the Hard SPL Folder. Before trying to run Hard SPL again.
yes, but it didn't work it keeps sayong error 262 inturruption conncected
I updated my bootloader to SPL 2.47 and than upgraded my radio to 3.37.75 with success. After a hard reset the phone shows the splash screen with the new radio for a few seconds and then hangs up on the plain verizon screen. I can get into bootloader (I have reflashed about five times now and tried a few different radios 3.37.2 and the same issue remains) ????
Sounds like you have to add the rom now. So flash the rom image.
drewcam888 said:
Sounds like you have to add the rom now. So flash the rom image.
Click to expand...
Click to collapse
I think the same thing.
Just another observation way add the old Verizon radio. Why not 3.42.40 or 3.42.50?
Yeah I still had the stock rom installed. I expected it to function without the rom update. I am going to flash to dcd's 3.2.6. Which radio do you guys suggest for verizon?
drewcam888 said:
..Why not 3.42.40 or 3.42.50?
Click to expand...
Click to collapse
For radios. You can't upgrade to a gps radio with a non gps rom. Sounds like a good way to brick your phone. Maybe read up before you flash again.
How do you establish active sync?
Plug the phone into a computer with activesync installed on the computer.
Never mind the active sync ? had to just take out the darn sd card
I've recently upgraded to the new official TMOUS ROM and now wanted to install OzROM_5.20_24635 instead since it's TMOUS friendly. But to do so, I need to install a 2.07-2.12 radio and have not been able to do so - the process is stuck at 0%. What do I do?
What's worse, now the phone won't turn back on. It buzzes numerous times at the "stick together" screen and won't budge from it. I've already kinda dealt with it via a hard reset once, but all that does is get me back to the problem above. And just now it won't even let me hard-reset it - same buzzing and stuck at one screen...
highlanderfil said:
I've recently upgraded to the new official TMOUS ROM and now wanted to install OzROM_5.20_24635 instead since it's TMOUS friendly. But to do so, I need to install a 2.07-2.12 radio and have not been able to do so - the process is stuck at 0%. What do I do?
What's worse, now the phone won't turn back on. It buzzes numerous times at the "stick together" screen and won't budge from it. I've already kinda dealt with it via a hard reset once, but all that does is get me back to the problem above. And just now it won't even let me hard-reset it - same buzzing and stuck at one screen...
Click to expand...
Click to collapse
Way do you will change the radio? I mean radio 2.15.50.14 is working well!?
Secondly, I hope you didn't flash a x.XX.51.xx Radio!
No, it's a .50. I need to downgrade because that's what the instructions say.
you can't run a different radio on 3.14 roms because there is no hspl to allow you to flash just radios. the info regarding the required radio (as with much of the info here, its a continual work in progress and it would be impossible to keep up to date.) is from before the later radios were released. the radio you have will work.,
Problem is now my phone won't boot. Buzzes six times upon startup and nothing...
yea, dunno what to suggest forthat except if its under warranty swap it.
highlanderfil said:
Problem is now my phone won't boot. Buzzes six times upon startup and nothing...
Click to expand...
Click to collapse
Do you have hspl installed? You need that to flash unofficial roms. I think if you had it before and you flashed an official rom, you may have to hspl it again.
Sent from my HTC HD2 using XDA App
zarathustrax said:
Do you have hspl installed? You need that to flash unofficial roms. I think if you had it before and you flashed an official rom, you may have to hspl it again.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
It's possible I don't...will look into that, thanks!
I've searched about trying to fix this on my own, but i have a feeling i may have caused more of a problem.
so trying to move back from android with a HSPL, i managed to install the original rom, but couldn't get rid of the CotullaHSPL when i flashed the new via USB.
so i looked for a Radio fix and ended up using the RUU_SIGNED.nbh radio from the same pack i used to install the rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
Radio i am on now is the SPL-3.03.000 XE.
So after i installed it it says "software update failed, please try again."
attempted to try boot and keeps saying the same thing. Went into MAGDLR to try and reinstall the same Radio again after a soft reset and it comes up with 00028002 with NOT ALLOWED underneath this error number.
i attempted to reinstall is the rom, but not it just keeps stopping and telling me i cannot.
Any help on this would be amazing, not sure whether i should try a task28/29 or whether there is a simple fix to this problem.
i didn't install the rom off the SD card, but i did install the Radio off the SD card.
it needs to go back to the original rom so i can claim warranty because of the touchscreen!
Thanks guys and i hope this was enough detail for someone to step in and help me and maybe someone else at the same time!
Drummerman44 said:
I've searched about trying to fix this on my own, but i have a feeling i may have caused more of a problem.
so trying to move back from android with a HSPL, i managed to install the original rom, but couldn't get rid of the CotullaHSPL when i flashed the new via USB.
Click to expand...
Click to collapse
hspl thread, post 1, hspl can only be removed by flashing stock rom from SD card or by using the hspl.exe utility.
so i looked for a Radio fix and ended up using the RUU_SIGNED.nbh radio from the same pack i used to install the rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
Click to expand...
Click to collapse
that's the whole rom radio and spl, not just a radio. It will have flashed the radio when you did the USB flash.
Radio i am on now is the SPL-3.03.000 XE.
Click to expand...
Click to collapse
that's not a radio, that's spl 3.03.0000 which goes with 3.14 roms.
So after i installed it it says "software update failed, please try again."
Click to expand...
Click to collapse
the leoimg.nbh you mentioned can't be from the rom you posted. I'm gonna assume (because the outcome would be what you have now) that you flashed a stock 3.14 rom from SD, and step 1 is hspl being replaced by the stock spl for that rom, , in this case 3.03.0000,, then the phone reboots to start the flash, but because hspl has gone only the stock roms that match your phone will work, hence getting flash failed.
attempted to try boot and keeps saying the same thing. Went into MAGDLR
Click to expand...
Click to collapse
can't flash from magldr, I assume you mean bootloader,, coloured stripey screen.
to try and reinstall the same Radio again after a soft reset and it comes up with 00028002 with NOT ALLOWED underneath this error number. i attempted to reinstall is the rom, but not it just keeps stopping and telling me i cannot.
Click to expand...
Click to collapse
because its the wrong rom and there's no hspl to bypass the check.
Any help on this would be amazing, not sure whether i should try a task28/29 or
Click to expand...
Click to collapse
whether there is a simple fix to this problem.
Click to expand...
Click to collapse
yes, get correct stock rom, flash it from SD, done.
i didn't install the rom off the SD card, but i did install the Radio off the SD card.
it needs to go back to the original rom so i can claim warranty because of the touchscreen!
Thanks guys and i hope this was enough detail for someone to step in and help me and maybe someone else at the same time!
Click to expand...
Click to collapse
Correct stock rom. Must match country and provider, example mines from o2 UK, so only o2 UK stock roms can be used.
The rom you posted the name of, see it says "HTC wwe" well the HTC bit means it's unbranded,example bought from carphone warehouse. If your phone came from o2, it would say o2 wwe
Oh and forget about the radio, it comes with the rom.
Bit off topic but once I've flashed MAGDLR can I ever go back to stock WinMO 6.5. I f'ed up and didn't SIM unlock my phone before I started hacking it up ( Hard SPL & MAGDLR)
nicknowsky said:
Bit off topic but once I've flashed MAGDLR can I ever go back to stock WinMO 6.5. I f'ed up and didn't SIM unlock my phone before I started hacking it up ( Hard SPL & MAGDLR)
Click to expand...
Click to collapse
flash stock rom. magldr gone.
samsamuel said:
flash stock rom. magldr gone.
Click to expand...
Click to collapse
figured that would be the course of action. Any particular stock TMOUS firmware I should flash.
Boy I sold my first HD2 about this time last year, just got a new one yesterday. And I gotta say WOW, this device has just gone crazy DEVn since the last time i owned it. Crazy things.
Doesn't matter, 2.10, 2.13 and 3.14 are the release versions.
samsamuel said:
Doesn't matter, 2.10, 2.13 and 3.14 are the release versions.
Click to expand...
Click to collapse
Perfect! thank you buddy.