i have O1 working on cm7 beta 6..when i connect it to my pc for mass storage...the phone reboots...god some one help me with this bad ROM...it is making me go crazy...can any one help me please?
try reflashing the rom i run CM7 and it works fine did you wipe your data brefore flashing it also did you flash the other zip he put on there maybe thats why
Related
Hi guys i know this may sound stupid but
yesterday i flash my lg p500 with franco kernel(v19.4) and cm9 rom using boot recovery mode and everything was fine(while installing a new rom i had made backup of my stock rom and franco kernel) but at the evening i found that my younger brother accidentally backed up everything which means now again i am on android 2.3.3 and he has formatted the sd card.
so i thought i can again upgrade it but i found some major problems
1. my o1 is not connecting to pc
2. camera is not working
3. Bluetooth is not getting on
and so more
LG P500
rom : stock rom(android : gingerbread 2.3.3)
kernel : franco kernel 19.4
software version : V20C
plz guide me what do i do now ?????????????
Thanx in advance
Not sure what ur asking exactly.
Try flashing a more stable rom or the cm7 nightlies.
The camera does not work in 4.0.3 as its very buggy(still in beta state)
jdayscokn said:
Not sure what ur asking exactly.
Try flashing a more stable rom or the cm7 nightlies.
The camera does not work in 4.0.3 as its very buggy(still in beta state)
Click to expand...
Click to collapse
Thanks for reply
but i am unable to connect to my pc so that i can flash my o1.
camera and other things are not working in a stock rom not in cm 9
You're running an official LG Gingerbread with a 2.6.32 kernel? That's wrong. Flash any .35 kernel. I recommend this one: http://www.mediafire.com/?lf87arbc491f5y2
By the way, I think you still can mount the sdcard on recovery to transfer files to it.
no my kernal version is 2.6.32.46 franco v19.4
and my pc is not recognising my o1 then how i transfer files for flashing
You could always download the rom through your phone and flash it that way, just don't format SD card, can still wipe data/cache/dalvik.
Sent from my LG-P500 using XDA App
Or if you have a sd card reader for your computer just take it out of your phone and put the file on it that way
Sent from my LG-P500 using XDA App
As I said, it's wrong to use a .32 kernel with the stock Gingerbread. You have to use a .35 kernel with this ROM.
Download any .35 kernel, turn off your phone then boot to the recovery through the buttons combination, then mount the sd card to transfer the files to it and flash.
Or make the mentioned above, downloading through your phone then enter recovery to flash it.
yup buddy i am doing the same let's hope this works.
m totally blank pla help shows error
1. Can't mount /sdcard/
What exactly are you doing? And did you try what I suggested?
Sent from my LG-P500 using XDA App
Download a .35 kernel to stop having the errors. You have 2 ways.
1. Download on your PC, then boot into recovery on your phone, connect it to your PC through USB and go to "mounts and storage > mount USB storage". After this you can flash the kernel.
2. Download on your phone then go to recovery and flash it.
Can you download the file from your phone? Not your computer. As in go to the spot to download on your phone browser not your computer. Then reboot into recovery and install from SD.
Sent from my LG-P500 using XDA App
now i have flash my kernel(link given by you)
and reboot and look what has comes
Fastboot mode started
ud_start()
--suspend--
--reset--
My guess would be that the .32 kernel messed something on the ROM.
You were on stock Gingerbread with the (wrong) franco.kernel .32 before, right? No more modifications?
Only do this if you have no alternatives.
In worst case scenario, you can copy your backup from the sd card to the PC (on recovery), turn off your phone and boot on emergency mode (back + volume up + power), connect to the PC and use KDZ to flash the stock ROM again (selecting EMERGENCY instead of DIAG).
Then with a system running OK you could install the recovery again, copy your backup to sd card, restore it and try something that solve the problem this backup has.
i have downloaded cm 7.1 rom but when i try to install big error list comes
and at the end installation aborted
wat should i do now ??
right now i am on stock rom and on kernel(link given by you)
suraj1992 said:
right now i am on stock rom and on kernel(link given by you)
Click to expand...
Click to collapse
But it doesn't boot, right?
yes that's the main problem.............
I really need help guys! I flashed CM9 Turl on my motorola atrix and then everything was fine for a whole day. later i tried flashing the cm7 faux's 1.45 ghz kernel and after it rebooted the whole thing just freezes. It's SUPER laggy, I can't get anything to move but the phone isn't bricked. My usb debugging is disabled and I can't get access to my internal storage also. There is no way to go back? My solution was to get a Ba2tf.zip CM7 file and flash it. But that didn't work because I can't use internal storage or USB debussing and usb mass storage is also off and I can't turn any of these things on!! Is there a solution to this? Can I buy a microsd card and put a ba2tf.zip on it, then put it in my phone, flash that cm7 file, then go to rom manager and go back to my backup of the CM9 turl? will that work?! Please someone HELP ME!!
Try to erase everything with fastboot and than flash a rom from recovery.
Fastboot commands
fastboot erase boot
fastboot erase system
fastboot erase userdata
fastboot erase cache
fastboot erase webtop
fastboot erase preinstall
fastboot reboot
Have you tried to access your backup through recovery? You don't need to use Rom Manager.
xShadowDemon97 said:
I really need help guys! I flashed CM9 Turl on my motorola atrix and then everything was fine for a whole day. later i tried flashing the cm7 faux's 1.45 ghz kernel and after it rebooted the whole thing just freezes. It's SUPER laggy, I can't get anything to move but the phone isn't bricked. My usb debugging is disabled and I can't get access to my internal storage also. There is no way to go back? My solution was to get a Ba2tf.zip CM7 file and flash it. But that didn't work because I can't use internal storage or USB debussing and usb mass storage is also off and I can't turn any of these things on!! Is there a solution to this? Can I buy a microsd card and put a ba2tf.zip on it, then put it in my phone, flash that cm7 file, then go to rom manager and go back to my backup of the CM9 turl? will that work?! Please someone HELP ME!!
Click to expand...
Click to collapse
xShadowDemon97 said:
I really need help guys! I flashed CM9 Turl on my motorola atrix and then everything was fine for a whole day. later i tried flashing the cm7 faux's 1.45 ghz kernel and after it rebooted the whole thing just freezes. It's SUPER laggy, I can't get anything to move but the phone isn't bricked. My usb debugging is disabled and I can't get access to my internal storage also. There is no way to go back? My solution was to get a Ba2tf.zip CM7 file and flash it. But that didn't work because I can't use internal storage or USB debussing and usb mass storage is also off and I can't turn any of these things on!! Is there a solution to this? Can I buy a microsd card and put a ba2tf.zip on it, then put it in my phone, flash that cm7 file, then go to rom manager and go back to my backup of the CM9 turl? will that work?! Please someone HELP ME!!
Click to expand...
Click to collapse
Although cannot read, but help you
Your main problem here was....
xShadowDemon97 said:
I flashed CM9 Turl on my motorola atrix
Click to expand...
Click to collapse
xShadowDemon97 said:
later i tried flashing the cm7 faux's 1.45 ghz kernel
Click to expand...
Click to collapse
The easiest way to solve this is to get into CWM recovery and wipe everything for a fresh install.
the best CWM recovery for atrix is romracer's Custom CWM-based Recovery
which u can get it from here
http://forum.xda-developers.com/showthread.php?t=1204500
after flashing it, go into recovery flash everything get a fresh new rom and flash it all over again....
________________________________________
if what i just wrote makes no sense to you at all, here is a very easy to follow step by step instructions...
http://forum.xda-developers.com/showthread.php?t=1302423
just skip the how to unlock bootloader steps and start reading from part about
'Proper Recovery'....
Hey everyone, i flashed today on my xperia p the ac!d soundmod V5, everything worked, after that i saw that there is a v7 preview release with some walkman engine, so i flashed both of them, cleared dalvik and partition cache, but after i reboot the phone it comes to the boot animation, after that the phone should start but it gives me to choose the home launcher and wether i click something on not after a few seconds i get again the boot animation and then the phone reboots :/
I can access CWM, i can use the phone also but just for a very short time, it is maybe 10-15 seconds :/
I don't have a nandroid backup and i don't want to loose everything again on my phone Is there any other way to get it working without reflashing the rom ?
Just flash the older version via cwm if u can
It should work
drsanket_xperia_u said:
Just flash the older version via cwm if u can
It should work
Click to expand...
Click to collapse
I can't because my phone won't get recognised as mass storage since i installed thebrainsrom, i can connect it just via fastboot, and that means i can't transfer the old ac!d
arnes_king said:
I can't because my phone won't get recognised as mass storage since i installed thebrainsrom, i can connect it just via fastboot, and that means i can't transfer the old ac!d
Click to expand...
Click to collapse
Cant u mount usb in cwm!??
If not
Try this
Flash Brains kernel
Boot in cwm
Mount usb
Put old acid files
Flash via cwm
Or if that doesnt work
Flash cm9.1 kernel
Come in recovery
Mount usb storage
Put old acid files
Fastboot flash older kernel wid cwm(brains kernel I prefer)
Flash acid old version
Hehehehe
No problm in trying? Right?
drsanket_xperia_u said:
Cant u mount usb in cwm!??
If not
Try this
Flash Brains kernel
Boot in cwm
Mount usb
Put old acid files
Flash via cwm
Or if that doesnt work
Flash cm9.1 kernel
Come in recovery
Mount usb storage
Put old acid files
Fastboot flash older kernel wid cwm(brains kernel I prefer)
Flash acid old version
Hehehehe
No problm in trying? Right?
Click to expand...
Click to collapse
I've managed to get it working again without loosing anything, i installed the official .54 ftf over flash tool but without wiping data, after that flashed again the custom kernel and rom and everything perfect except that i lost root
EDIT: Got my root back also
Hello poeple. I have one two big problems and i dont know what to do, about 3 weeks i downloaded a 4.4 kitkat rom for my gs2 and it wasn't working fine i've got some bugs, now i want to install new update but i cant because of that cwm 6.0.44, its not booting any sd card or internal. 2nd problem that i have is my usb not working... my phone is charging but i cant use it with pc, it charges with ANY pc that i have but they cant identify device and this problem is not rom fault because it didnt worked long time ago too. any solutions? is there any way to install new cwm without odin or using pc?
P.S. sorry for my bad english i hope you will understand
Use Rom manager to flash rom of cwm not work correctly. (need custom recovery and root to use app)
Or flash a recovery with odin
GreekBlood said:
Use Rom manager to flash rom of cwm not work correctly. (need custom recovery and root to use app)
Or flash a recovery with odin
Click to expand...
Click to collapse
i tried to use rom manager but it doesnt work, odin doesnt work too because my computers cant identify my phone :/ my phone is rooted too and cwm is i dont even know how to tell, i try to go install zip from sd card, no files found thats it
Adas1112 said:
i tried to use rom manager but it doesnt work, odin doesnt work too because my computers cant identify my phone :/ my phone is rooted too and cwm is i dont even know how to tell, i try to go install zip from sd card, no files found thats it
Click to expand...
Click to collapse
oh, forgot to tell. Your pc is recognizing it as unknown device.
Open device manager and you will see your phone (must be connected).
Open it and update drivers.
If that fails, (re)install kies.
No......DON'T use ROM manager.....it has been known to cause problems on the S2....not worth the risk.....
And get that USB port replaced BEFORE you attempt to flash anything else......if a flash goes bad, you will NEED that connection between your phone and your PC / laptop in order to recover your phone with Odin.......
If you search for threads created by me, you will find a guide that tells you all you need to know about replacing this part........
This might be my S2, or it might be my W...but it's definitely CM
Good day! I am trying to install the CWM flashable stock rom of my S2. I'm currently on CM11 nightlies and I'm installing stock rom 4.1.2. However, I cant seem to get the internal storage to mount. I can install the rom but everytime I finish I always get the "Blank USB Storage" message in my notification drawer and I cant use apps with that at all.
When I install the old ROM with my latest CWM or TWRP all I get are bootloops. When I install them using older CWM versions, I cannot get the internal storage to mount. Im also kind of confused with all the instructions in the forums with the EMMC brick bug and stuff. How can I flash back to the stock rom and get my internal storage back?
Help is much appreciated, thank you!
goodybags said:
Good day! I am trying to install the CWM flashable stock rom of my S2. I'm currently on CM11 nightlies and I'm installing stock rom 4.1.2. However, I cant seem to get the internal storage to mount. I can install the rom but everytime I finish I always get the "Blank USB Storage" message in my notification drawer and I cant use apps with that at all.
When I install the old ROM with my latest CWM or TWRP all I get are bootloops. When I install them using older CWM versions, I cannot get the internal storage to mount. Im also kind of confused with all the instructions in the forums with the EMMC brick bug and stuff. How can I flash back to the stock rom and get my internal storage back?
Help is much appreciated, thank you!
Click to expand...
Click to collapse
Try downloading the stock rom from sammobile.com and flashing with odin in download mode
Part of why I do that is because my USB port is somewhat damaged that any cords cannot read it, which is why Im using the CWM method :/
goodybags said:
Part of why I do that is because my USB port is somewhat damaged that any cords cannot read it, which is why Im using the CWM method :/
Click to expand...
Click to collapse
You could try mobile odin from the market
Apparently all I needed was to do a factory reset from the UI itself haha