i need to repair whit seus but never ask for repair, i can't with flashtool because i can't turn on the debugging, how can a do this.
I do that, use flash tool and an old version that I had saved and worked to perfection
You don't need usb debugging enabled to flash with the flashtool. Just turn off the phone.
Related
Flashtool dont recognize my phone.
I can flash tft, pc companion, ok, seus ok, superoneclick ok, but when i turn on flashtool, usb debug on, unknown res on, nothing happen.
I have all drivers, antivirus off, everithing off.
Is it posible to flash a ftf rooted with xrecovery?
I cant instal xrec. Tried flas 2.1, rooted with superoneclick.
But xrec nothing, manual way too.
Any sugestion pleeeease???
Fixed on 3 th pc.
Are you running as Administrator
Did you try another USB port
Do you have updated Sony pc companion/update service
are you on Win 7/Win XP/Vista ?????
Do you have the right Firmware/Baseband/Flashtool for your phone/Rom
Did you just start all over again reflash/root/xrecovery and read the how to and watch the video again
(DO NOT CLOSE FLASHTOOL)
Did you try:
This is Stock/Generic
http://forum.xda-developers.com/showthread.php?t=1196808 (This one has Videos)
This is Wolfs rom
http://forum.xda-developers.com/showthread.php?t=1192988 (this one has videos)
dukelc said:
Flashtool dont recognize my phone.
I can flash tft, pc companion, ok, seus ok, superoneclick ok, but when i turn on flashtool, usb debug on, unknown res on, nothing happen.
I have all drivers, antivirus off, everithing off.
Is it posible to flash a ftf rooted with xrecovery?
I cant instal xrec. Tried flas 2.1, rooted with superoneclick.
But xrec nothing, manual way too.
Any sugestion pleeeease???
Fixed on 3 th pc.
Click to expand...
Click to collapse
I believe that flashtool requires Java to be installed. Could that be your problem?
Sent from my X10i using xda premium
okey i unlocked the bootloade with this tut: http://forum.xda-developers.com/showthread.php?t=1254225 then i had "no service" on my phone (i think beacuse i used the msm7227_Setool2.cmd). first i thought it might be an problme with the software so i installed MiniCM7-2.1.3 because the bootloader was unlocked. but htat didnt fix it. but now i accidentally flashed it with the stock kernel. it wont boot and it wont go into flashmode. so can you plz give me any suggestions how to solve this problem? thanks!
sorry if i made any mistakes im new to this forum
it just shows the sony ericsson logo
have you tried pc companion and update service it may get your phone working.
yes but it says i have to activate the usb on it to connect/use it with pc companion. and as i doesnt boot, i cant do this.
Have you tried se update service as you say your phone is not booting.
If update service can't do the magic then you will have to go for flashing tool ....
i cant get into flashmode (when the green led is on). so update service and pc companion dont detect it
now use flashtool and follow all the instruction on this link below
http://forum.xda-developers.com/showthread.php?t=825664
ok im trying this one
okey im desperate here, maybe you posted a wrong link or what ever. i tried to flash with flashtool. i even created a bundle. but is still not recognising it in flash mode.
okey solved it
took the battery cable out pushed the back button and put the cable back in place then i plugged the usb cable in and it wet into flashmode
finally i just relocked my bootloader with s1tool
thanks for your help
I've flashed a few different roms (trying to get around this), and i can't get flashtool (latest version, just downloaded yesterday) to recognize that my phone is in debugging mode. it flashes fine, no issues, then i disconnect, restart the phone, turn on USB debugging and allow non-market apps.
then i reconnect, and flashtool always says debugging is off, when the phone says debugging is on. i turn off the phone, and reconnect while it's booting, and i get the same result. i can flash all i want, but i can't get flashtool to root the phone, or install xrecovery.
i've searched, and can't find a solution. any ideas?
- Trying Open Flashtool with the phone connected.
- Uninstall flashtool and install an old version of the program
- if does not work, change the cable (I've had a similar problem, I bought a new cable...)
Same issue found my solution
Hey I had the exact same issue but I found a solution.
My device is SE x10i 2.3.3 Generic
What I did was accidental.
I tried the old method of routing gingerbread which was too downgrade using "X10_aZuZu_Kernel_Downgrade_Generic.ftf"
but wat I also did was extract the load & kernal from the original ftf that I used to flash my phone with in the first place and put them into their own bundle so I could restore them.
After Flashing with the aZuZu downgrade
I disconnected the phone and turned it on it was stuck at the load screen where it says Sony Ericsson so I connected it again and my pc started downloading drivers.
But I installed the SEMC USB driver in the first place so I was wounder wth was goin on.
It turns out that in order for this to run smoothly you must make sure ALL DRIVERS are installed I personnally thought there was only one driver lol.
So you need to download the SEMC MASS STORAGE driver and 2 others (can't remember the names) perhaps the easiest way would be to just install the latest pc companion not sure but anyways this worked for me.
hope this helps
Please someone advise
I have read about a million threads and am unable to find the answer
My SE x10 mini e10i is in a constant boot loop showing the SE logo
I have tried using SEUS and it worked first time around,but after having tried a different rom to flash again with same problem
This time around it wont repair saying that the version is up to date
Also same with PC companion
First time around Flashtool did not work when I had my phone in USB debugging mode and started to flash it put USB debugging mode off and rebooted the phone. The only ftf that worked was nAa-08 - 2.6.29.6 loader and kernel. The rest of them it gave me the error of USB debugging turned off.
Now it doesn't even want to pass the logo and there is not CWM or xrecovery on the phone. When i try to flash it,the phone resets out of Flash mode and says USB debugging if off please turn on
Please if someone can advise. I even tried updating USB drivers,changing admin rights ex.
Damion1983 said:
Please someone advise
I have read about a million threads and am unable to find the answer
My SE x10 mini e10i is in a constant boot loop showing the SE logo
I have tried using SEUS and it worked first time around,but after having tried a different rom to flash again with same problem
This time around it wont repair saying that the version is up to date
Also same with PC companion
First time around Flashtool did not work when I had my phone in USB debugging mode and started to flash it put USB debugging mode off and rebooted the phone. The only ftf that worked was nAa-08 - 2.6.29.6 loader and kernel. The rest of them it gave me the error of USB debugging turned off.
Now it doesn't even want to pass the logo and there is not CWM or xrecovery on the phone. When i try to flash it,the phone resets out of Flash mode and says USB debugging if off please turn on
Please if someone can advise. I even tried updating USB drivers,changing admin rights ex.
Click to expand...
Click to collapse
bad luck 4 u......
i have this problem like this x10mini(my friend phone).....seus not work....flashtool say usb debugging if off...
but PC companion work for me...
SE X10mini with GINGER-DX
HAAHAHAH!!!
Can't believe it,after no sleep and lots of coffee
Got it working,plus flashed GingerDx which is one awesome amazing rom
The whole problem was with Windows 7
After extensive googling, I came across information that Windows 7 compatibility has issues with USB Debugging drivers
Had to set restrictions within Windows and then force install specified drivers
I used Flashtool with admin rights and first tried to flash a whole .ftf but did not succeed
The only .ftf that flashed was the E10_nAa-08_2.6.29.6-nAa-08.ftf
but that only includes a kernel and loader (but which helped me to be able to enter recovery
This is where i copied the Gingerdx.zip file on my SD card and tried to install
Did not work thou,baseband issue like before
So I took a chance,went back to Flashtool and tried to flash another .ftf file
2 of them failed due to the USB debugging issue. I un-installed the USB driver from computer manager,set Flashtool to only install baseband files and then hooked my phone up in flashmode plugged it in and wola,the driver like before installed (correct one for flash and not mass storage)
Thus from here did the whole .ftf flash and then in recovery mode installed the GingerDx.zip which worked now due to the baseband being correct
Thank you coffee,screw you Windows 7 (PS : also being 64bit)
And thank you for one awesome O/S stelios97
Sir I have encountered problem like yours, but with SE WT19i Live,
Please Elaborate this one..
Flashtool to only install baseband files and then hooked my phone up in flashmode plugged it in and wola,the driver like before installed (correct one for flash and not mass storage)
I have problem Pc companion sees my X10 mp like "big" X10 and installing X10 drivers. I can browse my files on card etc but I can't flash kernel in Flashtool I have error no drivers installed.When I pick up my phone in Flash mode my PC freeze and I mus restart PC . I haven't got this problem earlier. My x10Mp is running on nAa 11 kernel.
EDIT
OK I know solution of PC freeze I must run PC in safe mode But Pc companion detect big X10 not x10mp and when I turn phone in flash mode phone is in flash mode about 10 sec then phone normal starts
EDIT2
Sorry for my bad English
try the repair option in PC Companion, it will let you select your model, instead of PC Companion detecting it, you can get to it without even attaching your phone to your computer, just plug it in when it asks you for it (which is the connect in flashmode stage). maybe that way it will work
You will be back on stock firmware, but i guess that can be fixed again.