Related
Hi
when i turn on the device it shows (this is Orange-Israel device):
IPL: 2.16.0001
SPL: 2.16.0001
Radio: 02.07.10
OS: 2.16.9.1
and when i look at the device information, i get this:
rom ver: 2.16.9.1 wwe
radio ver: 02.07.10
protocol ver: 413.1.03
extrom ver: 2.16.9.101
I tried lokiwiz03a but it didn't work. after manually copying the two cabs to the phone this is the output that i got:
C:\>LokiwizMsl.bat
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: Qאm▒ך»BΘGφ2RW\↑►
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
Click to expand...
Click to collapse
The phone IS locked, i tried using it with a sim from another carrier (Cellcom) and needed to type an unlock code...
What is this strange simlock code?
What do i do with it?
Can anyone help?
Thanks,
Roy.
k
i have same k-jam but from other provider , cellcom.
rom - 2.16.9.1 wwe
date 2.6.06
radio 02.07.03
protocol 413.1.03
extrom 2.16.9.101
ipl 2.16
spl 2.16
gsm 02.07.10
os 2.16.9.1
i have tested all version of this unlock , thought phone stay locked.
other thing i have tested and found , if i remove the MULTILANG support (program make all menu to hebrew and add hebrew keyboard)
the phone will be unlocked!!!!
if i reacktive the program , it say sim is invalid.
any ideas ?
to yhe guy of the first post
you instaled the cet acb and the rapi cab??
for the second one as you post it your device is a g3 also you can unlock it via lokiwiz 2.b or do a downgrade 1.01 but verify if your device is g3
enjoy it
we cant unlock g4's...u have 2 pay 4 that...right?
you can unlock only sim if you want a cid unlocked you will pay of sim code is free anfter my mother g3 i had a g4 an i had unlockit very easy with lokiwiz3
So, lokiwiz3 is able to unlock the G4?
Tom
When the Lock Status shows only zeros it means that the lock bit is already removed and the phone is SIM (not CID) unlocked, thus the strange characters in the unlock code field
There should be no distinction between G3 and G4 regarding SIM (not CID) unlocking. The only thing that changed from earlier versions of lokiwiz is that when there were only G3 with IPL/SPL 1.xx the program would write an unlocked file to the phone instead of calculating the code to type.
mestrini said:
When the Lock Status shows only zeros it means that the lock bit is already removed and the phone is SIM (not CID) unlocked, thus the strange characters in the unlock code field
There should be no distinction between G3 and G4 regarding SIM (not CID) unlocking. The only thing that changed from earlier versions of lokiwiz is that when there were only G3 with IPL/SPL 1.xx the program would write an unlocked file to the phone instead of calculating the code to type.
Click to expand...
Click to collapse
yes u r right...i was thinking CID
how do i sim unlock mt htc wizard 200 i kant unlock it (srry for bad english)
alexwittmann said:
how do i sim unlock mt htc wizard 200 i kant unlock it (srry for bad english)
Click to expand...
Click to collapse
maybe with HTC Uni SIMUnlock you can do it , and you can find it in http://rapidshare.com/files/23944709/HTC_Uni_SIM_Unlock_v1.rar....
hii,
I bought a HTC HD2 from a friend with a broken LCD.
He walked with his HD2 in his pocket against a table and it cracked.
If you push a little on the screen you still can see allmost everything.
so here is the problem:
I try to boot it but I've got a black screen with a white triangle...
I did some research on google en tried a soft reset bij holding de up and down volume en start up the phone, it was succesfull. But the problem didn't solved.
Than I did the thing with only the volume down button and this is what i get.
a screen with 4 collors.
HX-BC
SPL - 1.42.0000 XE
MicroP (LED) 0x05
MicroP (TOUCH) 0x30
Upgrade rom code error please try again...
someone knows what to do ?
I really need some help.
Many Thanks..
What is your phone type?
HD2 with 512rom or TMobile ?
If you flash with official rom. Below are the serial numbers you may need to download the rom from official website.[I quoted from mskip]
World Wide English (WWE) - Serial: HT9AZNW00968
South East Asia (Asian WWE) - Serial:HT01XNW03437
Denmark: (DAN) - Serial: HT9B6NW00167
Norway: (NOR) - Serial: HT9C7NW01234
France: (FRA) - Serial: HT9BLNW00122
Spain: (SPA) - Serial: HT9BDNW00592
Italy: (ITA) - Serial: HT9BCNW00722
Greek: (ELL) - Serial: HT9BMNW00059
Germany: (GER) - Serial: HT9B9NW00374
Netherlands: (NLD) - Serial: HT9AVNW01232
Russian: (RUS) - Serial: HT9BCNW00012
Turkey: (TUR) - Serial: HT9CMNW05766
East Europe: (WWE_EastEurope) - Serial: HT9B3NW02204
*If you want to flash with custom rom.
Read below thread.
http://forum.xda-developers.com/showthread.php?t=609477
Go to HTC's website and download an updated ROM. You will only be allowed, with your phone's serial number, to download a ROM that is suitable for your phone.
It can't be a tmous with working spl 1.42.
It's been SD card flashed with an incorrect stock Rom whilst hspl was installed so updated the spl , removed hspl and then the flash failed.
Either find and flash the correct stock, or go straight to hspl2 and flash what you like. Usb flashing from bootloader will be fine in either case.
Well try to get the stock rom flashed...
Sent from my HTC HD2 using XDA App
Download the Stock ROM from HTC's website for the country the phone was purchased from. It should work flashing via SD Card method.
No way to flash stock rom
Hi,
I have an HTC HD2 bought in austria in sept 2010. since march 2011 i flashed to HSPL 2.08, Radiorom 2.15.50.14, MAGLDR113 and a Android NAND.
2 weeks ago i tried to upgrade to new NAND Version and my HD2 brocked. I´ve tried zu flash with stockrom by usb AND sd, but nothing worked. Tryed to flash by usb with org. HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe and get an Error 290 at 8%. After that i´ve tryed leoimg.nbh in root of SD by renaming RUU_signed.nbh form that rom.
Starting in Bootloader I read "Upgrade ROM code error Please try again" but it does not load the image from SD.
Any ideas?
thx in advanced
try using hspl 2 , 3 and 4 to remove the spl 2.08.hspl first, my first try would be hspl2 - choose 1.66.0000, and then flash the stock rom from sd card, and my second attempt if that didnt work would be hspl4 - choose 3.03.0000
hi again,
i tryed to flash with all versions of hpsl 2,3 and 4, but nothing works.
last try was hspl 2, 1.42.0000 an flashing by usb.
it was working to 100%, reboot and i get a whitescreen with htc logo.
thats all.
after 1 hour reboot, but nothig, only whitescreen with logo.
flash by sd don´t work anyway.
In that case, and especially since the failure happened at 8%, I'd say you have the stuck radio issue, (which seems to be happening a lot more than usual lately...)
Symptoms are usually spl seemingly flashing but hasn't changed when you check in bootloader, plus flashing failing at around 8 or 9%.
You may be able to flash cooked roms which don't include radio or spl, and you may be able to flash android, but may well get fatal hit errors,, it's not always the same. I suspect bad memory blocks or corrupted radio (or both, perhaps they are the same thing)
Hello,
I have a big problem with my german HTC Mozart ( T-Mobile version ).
2 weeks ago I flashed a RUU Rom to unbrand my mobile.
With this Software version my mobile is still branded and don´t work correct.
I would write more about the problems whith my mobile and this firmware, but my English is to bad….
After that I can´t flash any other Rom.
I tested to Install many other Roms, but the RUU installer every time says “Wrong Model ID”.
Then I looked my Phone Informations and see:
OS Version: 7.0.7004.0
Firmware revision number:2250.09.12803.111
Hardware revision number: NA
radio software version: 5.52.09.16_22.33a50.10U
radio hardware version: 0.0.0.0
Bootloader Version: 1.28.2250.3(113810)
Chip-SOC: 2.2.5.0
With the Rom, I flashed should be something wrong…
The Information on my Boot Mode Screen ( Rainbow) should be wrong, too
MOZA100 SS-BC (4K)
SPL-1.28.2250.3(113810)
MicroP (LED) 0x07
Touch C1(v69)
SD SANDISK 15193MB Class0
Partition Info-v211v413
In a german forum I found the same problem , but there are no solution.
Also I tested, to flash with a Goldcard.
I read all instructions to create a Goldcard an how to use it in this forum.
I think my created Goldcards are all OK but the USB HOST Screen every time says:
1. Loading
2. Checking…
3. And 3 second Later Serial on the bottom of the Display, but nothing else is happens..
Any Ideas?
so you have this problem for two weeks now?
what rom did you flash?
check the mozart forums:
http://forum.xda-developers.com/forumdisplay.php?f=779
and maybe this will help you:
http://forum.xda-developers.com/showpost.php?p=12120618&postcount=6
Yes, i have this problen for 2 weeks now.
It was a unbranded T-Mobile 1.28 rom.
Thanks, i have found someone else, with the same Problem, but no Answers.
see here
I have my Goldcards created with Ubuntu and Windows... Ubunto to find the CID and Windows, to create it...
And it seems to work, because the mobile is loading and checking the rom of the goldcard, but 3 seconds after checking... is the serial messeage in the bottom of the display and checking.. on the top, but nothing happens...
I had the same problem with my HTC 7 Trophy, flashing a new ROM did not work, and it changed the Model ID of the Phone. Once that has happened there is no way to flash a different ROM.
I tried various tools to try and get the Model ID changed back, if you use MTTY you can read the Model ID, but I don't think you can change it with that tool.
In the end I had to send mine to back to HTC to get the mainboard replaced.
hm sounds very bad..
but i think i saw the awnser somewhere...
try checking other wp7 devices forums,
hd2 people are very active..
hd7 people too...
somewhere ive read about some "force rom download mode" by pressing camera button on boot too, dont know if there was truth in it...
you say you had the t mobile 1.28 installed or you did try to install it?
it is not "unbranded" if its from tmobile (or do i get the term unbranded wrong?)
i belive there are 3 different t-mobile roms: TMO-DE, TMO-CZ, TMO-AT
these are all branded roms,
if you want unbranded you get: HTC-EU or HTC-Generic
ive used this method to unbrand my mozart from tmode 1.25 to tmode 109 to HTCEU 1.28
if you come from TMODE (as a german you should) you may want to try the 109 rom (works without goldcard)
so that i understand right, you can use the OS but you cannot make calls because of the cooked radio?
Hi, I have a German rom 1.28 installed, because i only can choose German or English language, but I do not remember which version it was. I think I previously had to install a 1.09.
However, there is something not been in order.
I think that the "force download mode" for this time is just for Zune, but I try to search for more information.
If I could flash any firmware I would do, but there is the problem with my "Model ID".
I think, the goldcard method is the right way, but it don´t works.
To eliminate errors about my hardware ( selfmade y-cable and hama 19in1 usb-cardreader ) I have ordered a delock y cable and a single usb-sd reader to try it on weekend again, but I think, the hardware is not my problem.
But i can test it not before weekend, because I´m a truck driver and only on the weekend at home.
Phone calls can I do with this firmware.
My display is out, if I choose a phone number. This time I only can hang up with the headset or by take out the battery
It works again until the other person accepts the call or the mobile hangs up automatically after 8 or 10 rings.
The volume of the headset ( earphones and micro), with this firmware is to quiet, too.
There are many problems….
somebody else with 1.28 and problems?
you dont need goldcard to flash back to stock rom
you should be able to flash any stock tmode rom without goldcard.
try to flash 109 without goldcard.
I´ve tried to install the
“RUU_Mozart_TMO_DE_1.09.001.16_5.50.09.15_22.23.50U_Signed_by_ansar”,
but after 1% my mobile reboots and the RUU Installer says:
244 wrong “MODEL ID”
are you sure it is a german Mozart?
this rom you flashed is made for unbranding.
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=817691
just saying....
that suxx have you tried this?
Zetabit said:
Problem Solved!
Here are the steps I took to resolve the issue I was having, with the Mozart stuck at bootloader, "Enter USB Host...".
First I formatted the SD-card, then used my brothers Android phone with ASTRO File Manager to extract the CID code from the SD card.
1. Insert the SD card into the Android phone
2. Start the ASTRO File Manager
3. Navigate to sys/class/mmc_host/mmc1/mmc1:aaaa (instead of aaaa there could be something else as well)
4. Long press on the 'cid'-file
5. First select Open as, then Text
6. Then select File-Editor
7. Write down the number 1 to 1 onto your PC/Mac
Once I had the CID code, I used http://psas.revskills.de/?q=goldcard to generate & email me the goldcard image file.
I formatted the SD card at this point, FAT32, 4096 sector size.
I then used HxD Hex Editor and Disk Editor to copy the goldcard.img into the first sector the SD card.
Heres how:
1. Run HxD as Adminstrator
2. Open the SD card by going to Extras > Open Disk > Physical Disks (important) > Removable Drive. Make sure Open as Read only is unchecked.
3. Open the goldcard.img by going to Extras > Open Disk Image.
4. From the goldcard.img, Select All and Copy all bytes.
5. Paste into the first 384 bytes of the SD card - offset(h) 0x0 - 0x170.
Next I copied a European ROM on the the SD card (in explorer as you would with any file) and rename it to MOZAIMG.nbh
With the Y-cable I booted the phone and to my disbelief it started and successfully reflashed the phone.
http://www.youtube.com/watch?v=0t_xNdf9DeQ&feature=player_embedded
Hope this helps!
Click to expand...
Click to collapse
there has to be a way to fix it.. or maybe not
the other guy said he got his mainboard changed, maybe you broke it.. damn...
@pik.
I have tested to flash the "RUU_Mozart_TMO_DE_1.25.111.05_5.50.09.18_22.24.50_RELEASE", but after 1% the same problem "Invalid Model ID"
@webwalk®
I have created the gold card according to these instructions.
I have no Android phone, so I have the part to find out the cid solved with an Ubuntu Live CD and my built-in Cardreader.
The goldcard seems to work, since it goes from loading in checking..., then it is always the same on serial
Edit: Yes, I´m sure, that it is a German HTC Mozart.
i've the same problem with 1.28
can someone help us?
i have the same question
my hardware version is also NA
dsmps said:
Hello,
I have a big problem with my german HTC Mozart ( T-Mobile version ).
2 weeks ago I flashed a RUU Rom to unbrand my mobile.
With this Software version my mobile is still branded and don´t work correct.
I would write more about the problems whith my mobile and this firmware, but my English is to bad….
After that I can´t flash any other Rom.
I tested to Install many other Roms, but the RUU installer every time says “Wrong Model ID”.
Then I looked my Phone Informations and see:
OS Version: 7.0.7004.0
Firmware revision number:2250.09.12803.111
Hardware revision number: NA
radio software version: 5.52.09.16_22.33a50.10U
radio hardware version: 0.0.0.0
Bootloader Version: 1.28.2250.3(113810)
Chip-SOC: 2.2.5.0
With the Rom, I flashed should be something wrong…
The Information on my Boot Mode Screen ( Rainbow) should be wrong, too
MOZA100 SS-BC (4K)
SPL-1.28.2250.3(113810)
MicroP (LED) 0x07
Touch C1(v69)
SD SANDISK 15193MB Class0
Partition Info-v211v413
In a german forum I found the same problem , but there are no solution.
Also I tested, to flash with a Goldcard.
I read all instructions to create a Goldcard an how to use it in this forum.
I think my created Goldcards are all OK but the USB HOST Screen every time says:
1. Loading
2. Checking…
3. And 3 second Later Serial on the bottom of the Display, but nothing else is happens..
Any Ideas?
Click to expand...
Click to collapse
i also have this problem,somebody say that use the "JTAG"can fix it.
does anybodu solve this problem on mozart?
regards
please help if you can i cant flash any rom and i want to go to dft
please help i cant flash anything please any solution
my problem is very similar to yours. i have tmob de mozart too and this vender id error after flashing an official europe rom....
i ordered goldcard tools from amazon but they arent here maybe in three days. but i think it would be the same problem as yours.
->
i had at first the dynamics7 1.00 mango rom installed on my htc mozart.
after that i made rspl to 1.28.
after that i tried to install RUU_Mozart_S_HTC_Europe_5.12.401.02_5.71.09.02a_22 .51.50_RELEASE. the flashing started. than the phone restartet and installed spl 5.12 but the flashing doesent went to finish because of vendor id error.
now i cannot flash any stock tmob de or htc europe rom because of vendor id error. (clear because of spl 5.12) but the slspl rom doesent work, too. every flashing stops at 1%....
PD 67100 SS-BC (4K)
SPL-5.12.2250.2 ( 135167) MNG
os 7.10.8107.79
firmware 2250.21.51301.401
hardware 0004
radio 5.71.09.02a_22.51.50.21U
radiohardware A.102.0.D4
bootloader 5.12.2250.2 (135167)
any solution for me? is it maybe possible to send lower spl via cabsender?
Don't use wrong ver
aggelosss5 said:
please help if you can i cant flash any rom and i want to go to dft
Click to expand...
Click to collapse
Be carefull with DFT i halfbricked my bootloader, now I cant flash any rom, can't use the phone.
I am looking for new method maybe JTAG is the only way out of this.
Thank if helpful:good:
hi all, I hard formatted my windows phone 6.5, HTC HD2 and started setup for HSPL3 For HTC Leo. The setup started and failed and i'm stuck with it now. it gives me screen
HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
Micro(TOUCH) 0x40
and when i start phone power+volume down with leoimg.nbh in SD card the screen says
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
Micro(TOUCH) 0x40
Upgrade ROM code error. please try again
Serial.
Please help!!!
Common issue:
You still have standard SPL installed & thus require a ROM that is correct ROM code of original country/operator which the one on your SD card is not hence "Upgrade ROM code error"
Your 2 options are:
1. Use HSPL 3 or 4 to install a HSPL which bypasses CID lock & allows you to flash any ROM but by USB & RUU, if do from SD it overwrites HSPL with SPL everytime
2. Find a compatable CID code ROM & flash it ...
If this is a T-Mobile USA handset make sure to flash a ROM with correct radio or you will have a brick ...
Mister B said:
If this is a T-Mobile USA handset .
Click to expand...
Click to collapse
it cant possibly be a tmous with 1.42.0000 spl.
@OP, you are in the wrong forum, this is for tmo usa model hd2 only. (That's why there's so few recent posts, , , most tmous users are now in the android forums.
With the phone in the stripey screen (bootloader) connect usb, , when 'serial' changes to 'usb' you are ready to try running hspl again. What are you aiming for? if its android, (meaning your target is 2.08.hspl) use HSPL2 instead.
hi guys,
i'm new in Windows Phone world: i've just bought a 2°hand (unlocked) HTC 7 Mozart jut to try WP7 experience.
I have one question about this device: how can i revert my phone to the stock software? I read a lot of guides but no one show how do this: all of them talks about unlocking.
My phone specs (bootloader screen):
PD67100 SS-BC (4k)
HSPL1.32.2250.1(119496)
CotullaHSPL 0x07
TOUCH C1(v69)
SD SANDISK 7580MB
Partition Info-v211v413
Thaks everyone for answers.