hi guys,
i'm new in Windows Phone world: i've just bought a 2°hand (unlocked) HTC 7 Mozart jut to try WP7 experience.
I have one question about this device: how can i revert my phone to the stock software? I read a lot of guides but no one show how do this: all of them talks about unlocking.
My phone specs (bootloader screen):
PD67100 SS-BC (4k)
HSPL1.32.2250.1(119496)
CotullaHSPL 0x07
TOUCH C1(v69)
SD SANDISK 7580MB
Partition Info-v211v413
Thaks everyone for answers.
Related
Dear Experts,
I bought a T-MOBILE HTC HD2 from states.ii want to flash a new rom(Elegancia) on it.So that I can put Android on my SD card.but I am confused because when I press volume down button + red button ,I found:
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
CotullaHSPL 0x05
0x50
Is HSPL pre installed?
my start up screen shows:
R 2.14.50.04
g 15.42.50..09U
D 3.14.04666 8G
It has :
Ram: 576 mb
Flash memory: 1024MB
Data bus:32bits
please suggest me what can I do to install android?
mlhazan said:
Dear Experts,
I bought a T-MOBILE HTC HD2 from states.ii want to flash a new rom(Elegancia) on it.So that I can put Android on my SD card.but I am confused because when I press volume down button + red button ,I found:
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
CotullaHSPL 0x05
0x50
Is HSPL pre installed?
my start up screen shows:
R 2.14.50.04
g 15.42.50..09U
D 3.14.04666 8G
It has :
Ram: 576 mb
Flash memory: 1024MB
Data bus:32bits
please suggest me what can I do to install android?
Click to expand...
Click to collapse
Yes it was preinstalled by "somebody"
Cheers
Can I put the Android folder on microSD card now without changing anything and run it?Thanks for you answer.
mlhazan said:
Can I put the Android folder on microSD card now without changing anything and run it?Thanks for you answer.
Click to expand...
Click to collapse
You might be able to run it perfectly without robovoice, you may not. It's worth a shot. You're not "installing" anything, just running some files. Either way android will work mostly perfectly. HSPL just means you can flash a new windows rom if you want to.
technically, yes
mobile is bootloader
not power-on
bootloader
moza100 SS-BC (4K)
SPL-1.28.2250.3(113810)
MicroP (LED) 0*07
TOUCH C1(v69)
SD SANDISK 967MB Class2
Partition Info-v211v413
phone ROM version?????????
tael.gh said:
mobile is bootloader
not power-on
bootloader
moza100 SS-BC (4K)
SPL-1.28.2250.3(113810)
MicroP (LED) 0*07
TOUCH C1(v69)
SD SANDISK 967MB Class2
Partition Info-v211v413
phone ROM version?????????
Click to expand...
Click to collapse
IHi,
It sounds like a TMO_AT or TMO_DE operator, did you bought it in Germany?
Then you can try any of these operators ROMs in this forum
Regards, ansar
Hello!
I have the following problem. After flashing my HTC 7 Mozart began to work badly (during a conversation locks the screen without the possibility of unlocking)
IN Bootloader:
MOZA100 SS-BC (4K)
SPL - 1.32.2250.1 (119496)
MicroP (LED) 0x07
TOUCH c1 (v69)
SD SANDICK 15193MB
Partition Info-v211v413
For the unknown reason phone Moza100 identifier, but should be PD67100. Tried to flash in different ways, including through GoldCard
The information about the phone:
OS version 7.0.7392.0
Firmware revision number: 2250.21.13201.111
Hardware revision: NA
Radio soft. 5.65.09.25_22_45_50.21U
Radio hard. 0.0.0.0
Bootloader 1.32.2250.1 (119496)
Chip SOC ver. 2.2.5.0
To solve this problem as I understand it, you need to change the firmware identifier PD67100 on MOZA100.
Could you change the firmware in the German "RUU_Mozart_TMO_DE" identifier on MOZA100 and sign it, or say how to do it.
I would be very grateful.
I hope to receive the help from Ansar.
Sorry for my english =P
hi all, I hard formatted my windows phone 6.5, HTC HD2 and started setup for HSPL3 For HTC Leo. The setup started and failed and i'm stuck with it now. it gives me screen
HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
Micro(TOUCH) 0x40
and when i start phone power+volume down with leoimg.nbh in SD card the screen says
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
Micro(TOUCH) 0x40
Upgrade ROM code error. please try again
Serial.
Please help!!!
Common issue:
You still have standard SPL installed & thus require a ROM that is correct ROM code of original country/operator which the one on your SD card is not hence "Upgrade ROM code error"
Your 2 options are:
1. Use HSPL 3 or 4 to install a HSPL which bypasses CID lock & allows you to flash any ROM but by USB & RUU, if do from SD it overwrites HSPL with SPL everytime
2. Find a compatable CID code ROM & flash it ...
If this is a T-Mobile USA handset make sure to flash a ROM with correct radio or you will have a brick ...
Mister B said:
If this is a T-Mobile USA handset .
Click to expand...
Click to collapse
it cant possibly be a tmous with 1.42.0000 spl.
@OP, you are in the wrong forum, this is for tmo usa model hd2 only. (That's why there's so few recent posts, , , most tmous users are now in the android forums.
With the phone in the stripey screen (bootloader) connect usb, , when 'serial' changes to 'usb' you are ready to try running hspl again. What are you aiming for? if its android, (meaning your target is 2.08.hspl) use HSPL2 instead.
Hello people, I'm new to xda-developers.
I'm having a problem with the OSPL mode (Power + Volume down button mode)
also new to this ROM thing. Wanted to install a custom rom, went through some description of this thread. Unfortunately skipped some of the part and tried to install the rspl on 5.XX Mozart.
Now when opening up the OSPL mode, There's no serial written on the bottom now. My laptop cannot detect the device.
Details in the OSPL mode:
PD67100 SS-BC (4K)
SPL-5.12.2250.1(134578) MNG
MicoP(LED) 0x07
TOUCH C1(v69)
SD SANDISK 15193MB
Partition Info-v211v413
F400.
Help needed ASAP.
Hope I get help from members here soon!
Additional info.
RSPL was not installed I attempted to install it because I didn't knew about the downgrading of SPL (It was 5.12), I'm just having trouble in the OSPL mode, how can I get my device to be detected again?
I went through this thread and got to know that nothing will happen to the device if the SPL version is not correct you'll just get an error message (which I also got).
So why is my device not getting detected? Low battery issue?