hi friends,nice forum
i purchased lately Toshiba folio 100 ,but im no satisfied at all with this machine,i cannot go to android market,hanging on,wireless problems,low performance and other things,Toshiba site didn't have any update or support for this kind of machines!!!
i want to upgrade to latest Dexter Rom which named
Folio3xv03a.zip
i want to know how to upgrade knowing that i read readme file on Dexter site FolioMod-Readme.txt
nstall instructions:
Copy contents of this zip : "update.zip"
in this release to the root of your sdcard.
At Toshiba power-on screen, Press Power, then press VOL+
Now press VOL+ button to enter factoryreset/firmware update
Press VOL- to enter firmware update
Press VOL+ to confirm you want to do it.
Insert SDcard into folio 100
Press the HOME key , when you see the "!" screen
Choose "install SDCARD:update.zip", and await status onscreen.
and i want to know if this is the right procedure exactly
my laptop info : Toshiba folio 100 android version:2.2 kernel: 2.6.32.9 build number:Toshiba _ folio_and_a.5.0131
thanks Dexter for good and wonderful job also thanks to all forum members
Related
Hello,i need help.
Today i decided to install FolioMod 1.4 on my Folio.
but i did these steps:
1. At Toshiba power-on screen, Press Power, then press VOL+
Now press VOL+ button to enter factoryreset/firmware update
Press VOL- to enter firmware update
Press VOL+ to confirm you want to do it.
Insert SDcard into folio 100
Press the HOME key , when you see the "!" screen
Choose "install SDCARD:update.zip", and await status onscreen.
But instead "install" have i "apply"
and when i select "apply SDCARD:update.zip"
that wrtites
...
...
7. installing MISC:...
and then nothing...
when i repeated and use an other instructions,ocours the same mistake
knows anybody what's wrong? thanks
Hello,
What version of stock rom do you have?
Did you try go to a recovery menu with already inserted sd card?
Regards,
headblow
i've ...2.2.5.0131 ,i've updated before i read some post about that update :-(.
And yes.i've tried every instructions what i found and too tried it with inserted with SD card.
Now i read some article,then i must re-write recovery image,is it right?
And if is,how can i do it?
Now you have the answer, you can't install foliomod this way on 2.2.5.0131.
In order to get foliomod on this version, you need to do following things,
Look here:
http://forum.xda-developers.com/showthread.php?t=961826
You may also use this links:
http://www.addictivetips.com/mobile/how-to-root-toshiba-folio-100-android-tablet/ (It may helps you root folio)
http://www.addictivetips.com/mobile/what-is-adb-and-how-to-install-it-android/ (It may helps you to install ADB)
http://www.addictivetips.com/mobile/enable-adb-usb-drivers-for-nvidia-tegra-based-android-tablets/ (It may helps you to configure ADB to work with folio)
It's very simple but it will take some time to do all necessary things.
Regards,
headblow
hey,thats what i was looking for!
Thanks a lot!
today i will try this! thanks
Niiice!
i've got it...
it was long but now i did it!
thanks a lot
Has anybody found a link to any custom or stock firmware for this tablet?
I have a small annoying issue that I am sure could be fixed with a flash, the back button randomly stops working until I reboot.
The baby Einstein on their 800 number thought a factory reset would fix it, then that using the software button was a good enough solution and had no clue about tablets in general. Through Support e-mail they were heading towards wanting me to ship the tablet back rather than supply a link to firmware. I explained to them it doesn't appear to be hardware related as it is random, and reboot fixes it.
im looking for the same firmware man, i have mine bricked :S
How to Flash Zeki TB782B, TB1082B Rom with Livesuit (UnBrick)
gmrastaman said:
im looking for the same firmware man, i have mine bricked :S
Click to expand...
Click to collapse
There is already a different thread on here with the information, but here is how I have personally done it......
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/show....php?t=1621831
ROM for Zeki TB753b
Do you happen to have the Rom for the TB753b (JB 4.1.1)? I have soft bricked my mom's tablet, and need the rom so I can flash it, and hopefully get her tablet back in working order.
Zeki TBD753B stock rom
I am generally good at finding stuff, but I too can not find the stock rom for the tbd753b 7" zeki tab. Any help would be much appreciated. Thank You
need build.prop
i need the original build.prop to flash to my messed up TB753B. does anyone got it??!!??
dragonfriend0013 said:
i need the original build.prop to flash to my messed up TB753B. does anyone got it??!!??
Click to expand...
Click to collapse
Do you still need the build.prop.original?
Sent from my TBD753B using Tapatalk 4
Got it working
vindicato said:
Do you still need the build.prop.original?
Sent from my TBD753B using Tapatalk 4
Click to expand...
Click to collapse
I was finally able to get access to it through ADB and reset the permissions on the file. all is good now. I do still have problems with the screen "double tapping" though and have not figured out how to fix it. Does yours do the same thing.
The only problem I seem to have is that top left hand corner. Sometimes you have to tap that location a couple of times if that's what you mean
Sent from my TBD753B using Tapatalk 4
---------- Post added at 06:42 PM ---------- Previous post was at 06:37 PM ----------
That and updating my Super su binary...
Sent from my TBD753B using Tapatalk 4
please give the firmware for tb753b
please give the firmware for tb753b. for Livesuit.exe
ROM for TAB ZEKI tbdc1093b
any have de rom for this tab? ZEKI tbdc1093b
fallen links , FID: BN TB782B
Can someone help me? I need this rom , my tablet is brick
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/show....php?t=1621831[/QUOTE]
hi guys
i have Crony cn98 MID tablet (Chinese)
i deleted file bin from system folder by wrong
when i power up the tablet, restarting itself
what should i do to fix that problem
i have 2 tablets of this type
it means i can bring file bin
but how to put bin folder in the tablet?
i need help
no way to fix it ?
how to reinstall android os?
or install custom rom 4.0.3 from pc ?
for crony cn98
os : 4.0.3
kernel : 3.0.8+
no reply :crying:
I did some reading on your behalf, let's try to sort this out. Good news is you can't really brick A10 allwinner devices.
Ideally you would need the original firmware from the manufacturer (.img file) and flash it through livesuit. However, this firmware is no where to be found on their website, I would try to email the device maker to send you the firmware. The email is: [email protected]
1 . Acqure the firmware file from manufacturer
2. Download livesuit (http://www.mediafire.com/download.php?lawkcbqhbictar4).
Follow these Instructions to flash .img file through livesuite (I found them elsewhere):
3. Open LiveSuit.exe
Double-click to open the upgrade tool LiveSuit.exe
4.Select the firmware
Click the cube to the far left to select the firmware .img file.
5. Turn off your tablet
6. Press the key combination to start it in the upgrade mode
a. Press the "Vol -" key, then press the "Power" button, hold two buttons at the same time
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly or hold the "Vol -" keys and the "Power" button for more than 6 seconds (you should get a pop up window if done correctly , if not repeat step 5 from beginning)
d. DON'T release the "Vol -" button till the LiveSuit window pops up
e. You can now release the "Vol -" button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver LiveSuit folder, click Next to complete the driver installation prompts).
You should see LiveSuit window pops up; otherwise, you didn't do it correctly, you have to repeat step 4 and 5.
7. Select the format to force upgrade
Livesuit prompt "force format", click "Yes" (Y). All of the original apps installed will be removed.We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
8. Upgrade begins
Pop-up "OK to force format" dialog box, select "Yes", the upgrade begins.
9. The upgrade is complete
Firmware download process last about three and a half minutes or so, please wait until the prompt "upgrade successful."
10. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
11. Congratulations! You have flashed the firmware.
If you are not able to acquire the original firmware from manufacturer, you can try to flash this one:
http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img (funbook pro m500, similar specs and running same processor)
thank u very very much
i do that all but this frimware is not compatible (it show me all thing black)
i still need frimware
i send email for [email protected] but no reply yet
hello! I have a tablet "energy Smailo 9.7" and can not access recovery mode. I tried all combinations of buttons "Volume + / - and Power Button" but nothing works. The back has a little button that must be pressed with a toothpick to reset. Can someone help me to get into download mode / recovery mode? thank you .
sorry for my englis i ussed google translate 1:laugh:
You can boot into recovery via adb, forum.xda-developers.com/showthread.php?t=1853159 . Though, please be careful and only use this as a last resort.
smailo hard reset
for a smailo web energy 7 how to do a hard reset?
please I need help with that because my tablet is stick at android logo and I can not use it.
How to rewrite firmware to smilo energy tab 7
Here's the way:
Install Pheonix suite 5(last version)
Download firmware from here :i can't put the link here, search on internet nuclear 6225 firmware download(XW711 v1.6 nuclear_6225-eng 4.0.4 IMM76D 20121210)
In pc suite press firmware select the file
Press upgrade
Close tablet
Press long volume
Connect to pc with micro usb cable
Press power shortly about several times, till the tablet is recognized to pc
After that the soft will be replaced(do not select full format)
When is finished the tablet will restart, will appear an error, but after that she will work
robert Hard&Soft Targu NT said:
Here's the way:
Install Pheonix suite 5(last version)
Download firmware from here :i can't put the link here, search on internet nuclear 6225 firmware download(XW711 v1.6 nuclear_6225-eng 4.0.4 IMM76D 20121210)
In pc suite press firmware select the file
Press upgrade
Close tablet
Press long volume
Connect to pc with micro usb cable
Ps. I used this FW: XW711 v1.6 nuclear_6225-eng 4.0.4 IMM76D 20121210
Press power shortly about several times, till the tablet is recognized to pc
After that the soft will be replaced(do not select full format)
When is finished the tablet will restart, will appear an error, but after that she will work
Click to expand...
Click to collapse
The firmware installs, but the touch very often is unresponsive and sometime when i press on something, it presses something else.
I mention thta the touch was working fine before firmware update. I needed to flash another firmware because of the "too many pattern attempts"
We could use some another software for this tablet?
Ps. I used XW711 v1.6 nuclear_6225-eng 4.0.4 IMM76D 20121210
Hi ,
So I got a pendopad 7 from dodo car insurance promotion and while I was trying to remove kingroot and replace with supersu , I think something went wrong and now tablet is in a weird state. It boots up to show nothing but if press and hold power button I can see option to turn off the tablet. I am assuming its something to do with systemui.apk , I was wondering if there is a way to fix it without rom install as I dont have any backup or the image to restore this tablet.
Its A-33 Quadcore Pendopad 7 PNDP51M7BLK
Ram 1 gb
Android 5.1.1
1024 x 600 px
http://www.pendo.com.au/pendopad-7-q...k-pndp51m7blk/
If anyone has this tablet or rom or any method to bring it back to life. Any help is appreciated.
I can acces the normal recovery on the tablet and have tried resetting it but doesnt help .I cant find the factory image for this device
Thanks
any help please ????????????
max414 said:
any help please ????????????
Click to expand...
Click to collapse
You may need more knowledge about this but here is what you can do
DON'T PLUG IN THE DEVICE INTO THE PC YET
Install Phoenix Suit and click the firmware button
Find a firmware image for your tablet. (most likely at chinagadgetsreviews.blogspot.com )
Hold down the power button for 10 seconds and let the tablet sit for 10-20 seconds to insure it is completely off.
ON THE DEVICE:
1: Hold ANY button that is not the power button
2: while still holding the other button, plug in the device to the computer
KEEP HOLDING IT DOWN
3: RIGHT after you plugged the microusb press the power button really quickly around 4 or 8 times and on the computer Phoenix Suite will ask you this:
Tip: Does Mandatory Format?
Click Yes
Click Yes again
It will install the new firmware, if it shows no progress for more than 6 minutes you don't have the right firmware image.
HOPE THIS HELPS
Oh yeah, you will need to re-root the device with KingoRoot PC, and Wifi, or Bluetooth may not work anymore. Sorry about that.