Related
Hello, I just got a Thunderbolt through my work and I noticed the screen tends to wash out at angles. I had this same problem with my T-Mobile HTC Glacier or MT4G. It turned out to be 2 different vendors Sharp and Sony displays being used in this model. Once I got the good display it was a noticeable difference in the quality of the better display vs the bad one. Direct viewing from straight on is ok just as it was on the HTC Glacier. So I just wonder if anyone might have a good one and could post some pics to show.
Here is my original thread for the HTC Glacier with the Screen issues. There are some pictures and videos to compare the differences. I'm seeing some washing out at angles, especially around the clock digits where this problem is easily seen.
http://forum.xda-developers.com/showthread.php?t=863679
Here are some pictures of mine with the Sharp screen. The noticeable areas are the clock widget black areas where they flip.
I'd say it's possible. I'm sure they have more than one place that manufactures the devices. There's been some variability in the build quality of the devices, so it's not too far fetched.
I don't have a camera other than my phone to take pictures, though. It looks like a really good display to me and doesn't "wash out"
You're right there are two displays. I went to the store last week to compare my phone with the display. Because I used to have the mytouch 4g and it took three tries to get one with a nice display. So I was surprise, when I saw the display model and colors were not as vibrant as mine. Man did I get Lucky, first try and it's a winner.
This is interesting. I ran a "dmesg |grep panel" and it returned sharp. I wonder if anyone would get Sony.
Mine is noticeably worse than my MT4G that had the good screen.
Sent from my ADR6400L using XDA App
If you ask me, there is no doubt that there are two panels for this device. My first TBolt (which had several problems) had a really bad screen and I complained about it in another thread like this one. I had it exchanged and the new one is VERY much better. The first one was not crisp, colors were bad, looked blown out next to my DInc OLED. The replacement is crisp and the colors are beautiful.
I didn't get a chance to compare side-by-side, but everyone who had seen my first one, even my wife who is pretty oblivious about these things, would say that the new one is dramatically better.
boingboingbilly said:
If you ask me, there is no doubt that there are two panels for this device. My first TBolt (which had several problems) had a really bad screen and I complained about it in another thread like this one. I had it exchanged and the new one is VERY much better. The first one was not crisp, colors were bad, looked blown out next to my DInc OLED. The replacement is crisp and the colors are beautiful.
I didn't get a chance to compare side-by-side, but everyone who had seen my first one, even my wife who is pretty oblivious about these things, would say that the new one is dramatically better.
Click to expand...
Click to collapse
Thanks, could some of you with good screens do a dmesg in terminal and report if you have a sharp or Sony panel. Make sure you restart then immediately run the terminal and dmesg command. Mine is a sharp so I'm thinking it is the bad display. Also if you can post some pictures of the screen from the side at extreme angles.
I will try to take some pictures of mine and post them tomorrow.
Before some of you start stating your opinions about looking at the screen at angles, yes there are situations where you are viewing at angles. Also it has been proven at least in the MT4G with the bad sharp display that the colors are not as vivid as with the sony screen even when looking straight on.
Mine is made in Taiwan. If you have a good one post where it was made please.
Mine returned Sharp.. and the screen is much better than my OG droid and my wife's fasicnate. I can read this post at ~160ish degrees, sooo.. no idea
Sent from my ADR6400L using XDA Premium App
dr_drache said:
Mine returned Sharp.. and the screen is much better than my OG droid and my wife's fasicnate. I can read this post at ~160ish degrees, sooo.. no idea
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
Reading this board may not be enough to tell. I will be interested to see if anyone has a Sony screen to compare.
The point is, everything I do on this phone can be done at that angle, in relation to using the screen. Colors do not change, only the brightness, as to be expected from a gloss screen (and gloss screen protector).
I personally think that shows a quality screen.
Definitely not something to worry about.
FYI : I have my dpi set to 200 if that matters
Sent from my ADR6400L using XDA Premium App
Here are some more pictures which stand out more with green colors. You can really tell the difference as you tilt to angles and the deep green contrast is lost and it is hard to define the icons. The middle picture is taken from straight on and you can see the difference. I think on the Good Sony displays there will be no difference when looking from angles. I really suspect that the same display problems are following from HTC and the MT4G.
Is there any way to tell my looking at the hardware number what screen we have?
Forgetfull said:
Is there any way to tell my looking at the hardware number what screen we have?
Click to expand...
Click to collapse
No I doubt it, we could never tell with the MT4G. The only one thing that seemed to hold true in the beginning was the ones made in China had a higher percentage of the good screens and more of the ones made in Taiwan had the more of the bad ones.
i have a sharp panel as well. i'm no connoisseur apparently because i think my screen looks just as good as my old incredible.
I have one made in taiwan and it is essentially flawless, only thing wrong with it is 2 very tiny dots of light leak which can only be seen in pitch black
bobsbbq said:
No I doubt it, we could never tell with the MT4G. The only one thing that seemed to hold true in the beginning was the ones made in China had a higher percentage of the good screens and more of the ones made in Taiwan had the more of the bad ones.
Click to expand...
Click to collapse
Odd, mine is made in Taiwan, are all bolts produced there now?
dmesg says sharp panel, but I have no complaints about viewing angle or contrast after quite a bit of fiddling with it and trying to find something to whine about.
I have a sharp panel and it's better than the display model at my local store. I used to own a mytouch 4g, it took three tries to get a good display. And the good display was made in china. My TB is made in Taiwan.
This would explain why some claim to have gorilla glass style display that can't be scratched and others are getting scratches from car keys.
My first phone the digitizer went out after a drop out of the car (no glass broken or cosmetic issues just said touch panel- fail) and the second phone has light leakage not just at the bottom but at the corners too. There is a gap at the right corner for whatever to get into my phone.
I want to know if there is a different 'nicer' panel. It seems quite a few people are popping up with broken digitizers...
The phone I have is a Sharp lq043y1dx04
How do I know? Because I busted mine open to try and fix my broken digitizer. You can see pics and read the story in my post "Anyone want to see the inside of a thunderbolt?"
Still no replacements out there :-(
Digitizer or LCD
I have not taken this phone apart. But I did replace the digitizer on the HTC INC. The Digitizer is separate from the LCD in that phone. Does anyone know if the Digitizer is separate in the Thunderbolt? If so, it does not matter who the manufacturer of the LCD is.
I to agree with this thread that the digitizer on the Thunderrbolt is very easily scratched especially compared to the HTC INC.
I just recently switched from an Evo 4G to a new Evo 3D. After about an hour of having it I noticed something was off with the screen. It had a yellowish tint to it (I've had an Evo 4G and a Nexus S 4G do this out of the box also). Now I did return the phone to get one that had a correctly functioning screen, but my question is this: Has anyone else experienced this with the Evo 3D? I did notice that the serial number on the 3Ds with the yellowed screens were HT17 models and the one I ended up with that had a good screen was an HT16.
P.S. I just want other users thoughts on this. I don't want people telling me to just exchange the phone. Has anyone else with the HT17 models experienced this? There were three Evo 3Ds that I have seen do this.
I have an HT17 serial number and my screen is not yellowish tint at all. Very happy with the whites.
My best guess is that this Sprint store received a bad batch. Or I just have bad luck considering I have run across 5 yellowed screens across 3 different products.
I have a ht16 now and i got the yellowish screen. I had 2 before that was bright whites but I dont remember what they were. I dont know if i really wanna exchange again since everything else is good and dont want to end something worse
Sent from my GT-P7510 using Tapatalk
my original 3D was a HT16 I got through the premier order deal and had a slight tilt to the screen so I got telesales to send me another. The new one is an HT17. Now on to the differences I've noticed so far.
HT16(original)
Screen-> darker/slight yellow whites(or more realistic) when compared to the new one.
dmesg showed the following:
"panel: mipi_cmd_novatek_qhd"
"<6>[ 1.797454] mipi_novatek_panel_type_detect: panel_type=PANEL_ID_SHR_SHARP_NT"
HT17(newer just received yesterday)
brighter whites somewhat fake at times i guess you could view it.
power button was very mushy and much tougher to work compared to the HT16 which was very firm and clicky.
dmesg showed:
"<6>[ 1608.757825] Panel Type = PANEL_ID_SHR_SHARP_NT"
Now on to the odd thing. I took pictures with both phones in the exact same location and settings and you can tell when viewing on the phone the one has lil brighter(maybe faker) whites. I thought possibly that it could be just because of the screen and the photo taken would look the same on a PC but they dont. you still see the diff in whites on home PC. Also somehow the photos size were different with the HT17(brighter whites) coming in at 611KB, and the older HT16 file was 776KB.
Now whats even funnier is that when you select the photo in the gallery and view details the HT17(brighter whites) lists it at 478KB and the HT16(original) lists its size at 613KB. This is different fromt he size thats listed when you email it, and even whats listed next to it when you attach it in an email.
anyone explain what I posted up at all?
I'm gonna try mine with the same picture test. How do you find the HT#? I'm sure it's so stupid obvious I'm just overlooking it.....
ggeralds said:
I'm gonna try mine with the same picture test. How do you find the HT#? I'm sure it's so stupid obvious I'm just overlooking it.....
Click to expand...
Click to collapse
its on the box your phone came in and also should be under the battery.
As for your issue with the picture file size, that just sounds odd. Were both phones the same software version?
the yellowing could possibly be glue that hasnt dried all the way yet. it happens if they are moving units real fast. if this is the problem it should dry out in a few days and your whites will be white again. could be a defect too. if anyone else has this problem try giving it a few days and see if it goes away.
Killa357 said:
As for your issue with the picture file size, that just sounds odd. Were both phones the same software version?
Click to expand...
Click to collapse
nope the original one was on the original OS, while the other was on the newer one.
Killa357 said:
I just recently switched from an Evo 4G to a new Evo 3D. After about an hour of having it I noticed something was off with the screen. It had a yellowish tint to it (I've had an Evo 4G and a Nexus S 4G do this out of the box also). Now I did return the phone to get one that had a correctly functioning screen, but my question is this: Has anyone else experienced this with the Evo 3D? I did notice that the serial number on the 3Ds with the yellowed screens were HT17 models and the one I ended up with that had a good screen was an HT16.
P.S. I just want other users thoughts on this. I don't want people telling me to just exchange the phone. Has anyone else with the HT17 models experienced this? There were three Evo 3Ds that I have seen do this.
Click to expand...
Click to collapse
Check this out
http://www.youtube.com/watch?v=9JRe5VGmpZs&feature=youtube_gdata_player
Sent from my PG86100 using XDA App
I've had 3 Evos...2 with the yellowish tint, and one without. I honestly don't think most people notice since it seems other colors are fine and sharpness is still good. It's only apparent usually when you go to a app or webpage with an allwhite background and even more apparent when you compare it to another phone with a nonyellow tint(which I did).
i just got a replacement yesterday and the screen has a yellow tint. i dont know if i should keep it or return it.
I'm using a HT17 and the screen is very yellow. If I max out the brightness it gets washed out and the blacks goes almost grey. Next to my Desire Z the screen doesn't even come close to representing the correct colors. I notice this especially in the search page and a blank internet page.
My Sensations had totally different screen as well. The first was nice and white and the second was yellowish... I'm so frustrated...
I noticed that side by side, the evo has cooler colors (blue tint) and I've noticed that the 3d has warmer colors (red tint). May just be the nature of the screen
Sent from my rockin 3D
What is the Number that gets displayed in the top right corner taking 2D pics. It flashes up briefly when camera is first displayed right after taking a pic. I have everything set to fac defaults and can't figure it out.
Reason I'm asking is b/c I have 2 3D's here(one is a exchange) and am trying to figure out which im keeping. Taking photos in the exact same location i seem to have each phone showing different values in the top corner and can't figure out why.
both ver2 hardware, one has the OTA one doesn't. The one that doesn't has dimmer/darker whites on the screen and noticed the screen on that one is actually shown as "panel: mipi_cmd_novatek_qhd" using dmesg in terminal. The new one is brighter whites, and shows "Panel Type = PANEL_ID_SHR_SHARP_NT" for it. I got the first one with the early premier offer. The 2nd one(sharp) has the brighter whites(maybe lil fake whites not sure) but screen is little less tilted, than the original one, BUT the power button is much mushier than the original which had a tough defined click. Tried switching out the battery covers and same result even.
The only number that shows up on mine is the number that displays how many pictures you can take based on the storage available. The two might display different numbers because one has the update and the other doesn't there one consuming more free space than the other.
hchavarria said:
The only number that shows up on mine is the number that displays how many pictures you can take based on the storage available. The two might display different numbers because one has the update and the other doesn't there one consuming more free space than the other.
Click to expand...
Click to collapse
ahhh thatd be it then haha, they both have diff cards in so that explains it all.
Now I am wondering if the cameras are lil different in the phones as even sending the pics in email to my home pc they look different so its not just the screen showing the whites difference. Also the pics ended up being different sizes one 611KB and other 776KB(older 3D with novatek panel).
Now whats even funnier is that when you select the photo in the gallery and view details the Newer3D(brighter whites) lists it at 478KB and the other 3D(original) lists its size at 613KB. This is different fromt he size thats listed when you email it, and even whats listed next to it when you attach it in an email.
What I want to know is where the setting is to time stamp your pictures. It was a basic setting in the pic app on my Hero.
Sent from my HTC 3VO using XDA App
I've seen this issue on two ROMs now where I take a picture and rather than ending up with the sharp review picture shown on the screen right after, I end up with a blurry image that was taken about 1/4 second later. I've seen this running both Euphoria and Slim. I'm wondering if it's a known issue that I haven't been able to find info on (I've searched but most people just seem to care about FFC) or if somehow I'm causing this.
If you aren't sure if you're seeing this but have a moment to experiment, try the following:
1) Get your significant other, family member or friend to stand in a brightly lit room.
2) While you're aiming your camera at them have them start turning in a circle. Doesn't have to be fast but shouldn't be really slow either.
3) Take their picture and remember the position they were in when the review still was displayed after the picture was taken.
Now compare your memory of what the camera showed to you with the result in the gallery.
I consistently see that the picture that was stored was taken about 1/4 second after the review I saw after taking the picture. It's also usually less sharp.
---
btw, the problem can also be shown by just panning the phone and taking a picture during the pan. If you end up with something recognizable in the review image you may find that the final image doesn't match.
Hmmm.. all seems well in ICZenwich
Hmm. Wish I had the luxury of installing ICZ just to find out if that camera doesn't have the problem or if this is a problem with my phone somehow, or how I'm restoring apps badly. I'm otherwise happy with Slim so I'm reluctant to install a new ROM since I just put this one on a couple of days ago.
If nobody else chimes in I'll try ICZ this weekend.
btw, the problem can also be shown by just panning the phone and taking a picture during the pan. If you end up with something recognizable in the review image you may find that the final image doesn't match.
Here some sample of picture I took with ICZenwich, Just basic setting.
mostdef, I think you've misunderstood the problem. None of those images show motion. With the subject standing still you'd never see the problem I'm describing. It's when the subjects are in motion or the camera is in motion (panning) that you may see the issue.
I've also seen it on Slim and Zen.
Looks like the actual picture is taken a sec after the camera display actually clicks and show you the preview. The trick is to remain still after the camera says its taken the picture. You get a picture that is a sec after the phone assume you take it. However, if you move the phone right after the camera clicks, then the picture is ruined. Same thing as if you take a picture as your arm is moving.
illego said:
I've also seen it on Slim and Zen.
Click to expand...
Click to collapse
I'm glad it's not just me or my phone but that's messed up.
The biggest issue is that the review picture the camera shows is not what you end up with. There's no point in having the review image show up after a picture is taken if it's going to be wrong.
It doesn't matter how still you hold the camera if what you're taking the picture of is in motion.
I can't believe more people aren't talking about this
michaelh99 said:
I'm glad it's not just me or my phone but that's messed up.
The biggest issue is that the review picture the camera shows is not what you end up with. There's no point in having the review image show up after a picture is taken if it's going to be wrong.
It doesn't matter how still you hold the camera if what you're taking the picture of is in motion.
I can't believe more people aren't talking about this
Click to expand...
Click to collapse
Are you talking about moving the camera around that look like it jerky on motion or are you talking about moving object?
Does any tablet owner here of M5 or same family tablet, has noticed if one of your display has an edge or sideline that is slightly slightly darker, during using a fully white background?
On my m5 Pro I've noticed that with a fully white backgroud, I do have an edge, close to the left bottom corner (holding the tablet horizontally) that is slightly gray rather than the right side. Off course that: if I'm rotating it, then it Will happear to the top instead.
If you don't stay there and looking at it for a minute, you don't notice it. But if you look at it and compare to the rest of the screen or other side, then you'll see this small difference.
Do you have same issue? Does it is an IPS display issue?
Ah! It makes it only with the White. Only the White. Other colors comparisions are fine.
Looking videos, pictures or anything else that does not push the screen to a very high density white in that side, it's fine.
You can try to see if you're having the same of opening the cleaning chache program, where there is a lot of White all around the screen. There you can watch side by side and every corner... and you can try too see if somewhere do you have a slightly white difference compared to the rest.
But as said above. Only white make this.
Videos, pictures with same colors side to side are fine. It's all about the White.
I've contacted the Huawei assistance trough Phone and they said that is normal and panels might do this, and if in doubt, I'm free to go to the Local official technical assistance in my town to have a confirm for it .
So I've done that! I've moved to the Local technical assistance and the technician told me that it might happens and it is not worthy of a repair, because changing panel might not solve the problem as this slightly slightly brightning difference might show on another side. Has more sense to wait if in these 2 years something going worse and repair it over warranty.
It's hard to see this difference of White brightness, and I've noticed that just because I'm a really fussy guy and ... off course I don't spend my time on surfing on the menus. It's also a post to understand it these kind of IPS panels may encount these issues.
Anyone here is experiencing this thing? Or are you watching all the sides of your tablet to see if do you have it aswell? :laugh:
It's called uneven brightness, and reading notebookcheck's review said that it is above average. Seems you have received a dud, but it's likely within tolerance im afraid.
Michaelflat1 said:
It's called uneven brightness, and reading notebookcheck's review said that it is above average. Seems you have received a dud, but it's likely within tolerance im afraid.
Click to expand...
Click to collapse
Are you sure It's a dud? In a FB group a guy said that he's even worse on his 8.4 because he has it all over the edges . And on a previous M3 he got, there was an even worse side with less brightness. And so He returned the tablet.
In my case, it's so soft that you don't notice it at all. You do have to search for it. And it happens only with the White.
It the technician in the store told me it's not worth a replace the panel, this slightly brightness might happpen and same issue might happen in another side, nobody knows. I wish to beleive him . Why He would had lied to me?
Anyway I've read the m5 review and they are showing the characteristic of the brightness all over the display. Yea, it is seems a trait of it, and a 0,25 cd/m2 is barely perceivable.
What's your opinion?
andreawars said:
Are you sure It's a dud? In a FB group a guy said that he's even worse on his 8.4 because he has it all over the edges . And on a previous M3 he got, there was an even worse side with less brightness. And so He returned the tablet.
In my case, it's so soft that you don't notice it at all. You do have to search for it. And it happens only with the White.
It the technician in the store told me it's not worth a replace the panel, this slightly brightness might happpen and same issue might happen in another side, nobody knows. I wish to beleive him . Why He would had lied to me?
Anyway I've read the m5 review and they are showing the characteristic of the brightness all over the display. Yea, it is seems a trait of it, and a 0,25 cd/m2 is barely perceivable.
What's your opinion?
Click to expand...
Click to collapse
my M5 is perfect, no noticeable differences in brightness anywhere. Notebookcheck said that the 8 in model has poorer display anyway.
If it's not noticeable in normal use then it's fine.
Michaelflat1 said:
my M5 is perfect, no noticeable differences in brightness anywhere. Notebookcheck said that the 8 in model has poorer display anyway.
If it's not noticeable in normal use then it's fine.
Click to expand...
Click to collapse
Nah...exept The White background, it's ok on all use.
But as said above, if I do watch that edge to try to catch the eye to find this difference.
Technician said it's ok. Hope it is. I just want to know if anyone experienced this with this model or any other tablet with IPS display
Michaelflat1 said:
my M5 is perfect, no noticeable differences in brightness anywhere. Notebookcheck said that the 8 in model has poorer display anyway.
If it's not noticeable in normal use then it's fine.
Click to expand...
Click to collapse
Is there any reliable software for Android to do the same thing done by notebookcheck and testing the brightness? Like this:
I've checked that one on playstore, but I did not find nothing.
Any suggestion?
andreawars said:
Is there any reliable software for Android to do the same thing done by notebookcheck and testing the brightness? Like this:
I've checked that one on playstore, but I did not find nothing.
Any suggestion?
Click to expand...
Click to collapse
You need something that can detect the brightness, usually expensive hardware that connects to a windows machine. I think they start at around $500 or so. You could rent one i suppose. (if you could find somewhere or someone!).
But yeah it needs hardware.
andreawars said:
Does any tablet owner here of M5 or same family tablet, has noticed if one of your display has an edge or sideline that is slightly slightly darker, during using a fully white background?
On my m5 Pro I've noticed that with a fully white backgroud, I do have an edge, close to the left bottom corner (holding the tablet horizontally) that is slightly gray rather than the right side. Off course that: if I'm rotating it, then it Will happear to the top instead.
If you don't stay there and looking at it for a minute, you don't notice it. But if you look at it and compare to the rest of the screen or other side, then you'll see this small difference.
Do you have same issue? Does it is an IPS display issue?
Ah! It makes it only with the White. Only the White. Other colors comparisions are fine.
Looking videos, pictures or anything else that does not push the screen to a very high density white in that side, it's fine.
You can try to see if you're having the same of opening the cleaning chache program, where there is a lot of White all around the screen. There you can watch side by side and every corner... and you can try too see if somewhere do you have a slightly white difference compared to the rest.
But as said above. Only white make this.
Videos, pictures with same colors side to side are fine. It's all about the White.
I've contacted the Huawei assistance trough Phone and they said that is normal and panels might do this, and if in doubt, I'm free to go to the Local official technical assistance in my town to have a confirm for it .
So I've done that! I've moved to the Local technical assistance and the technician told me that it might happens and it is not worthy of a repair, because changing panel might not solve the problem as this slightly slightly brightning difference might show on another side. Has more sense to wait if in these 2 years something going worse and repair it over warranty.
It's hard to see this difference of White brightness, and I've noticed that just because I'm a really fussy guy and ... off course I don't spend my time on surfing on the menus. It's also a post to understand it these kind of IPS panels may encount these issues.
Anyone here is experiencing this thing? Or are you watching all the sides of your tablet to see if do you have it aswell? :laugh:
Click to expand...
Click to collapse
What did you decide? I have one side that is darker or M5 10.8, not a pro version.
Should I try to replace it? It does not bother me much and I read here that there are more units, that come with more darker sides/edges.
kaimyns said:
What did you decide? I have one side that is darker or M5 10.8, not a pro version.
Should I try to replace it? It does not bother me much and I read here that there are more units, that come with more darker sides/edges.
Click to expand...
Click to collapse
The problem for me it's just a little and not worth a change for defect.
Because a repairing stores told me that quite always somewhere that little little darker side happear. It's not guarranteed that with a replacement it would not happear elsewhere. It's happening only with the White. Normal use the tablet is fine.
It's an issue of the IPS display, expecially large displays. That's Why i love the AMOLED all the way.
Technician said it's not for a change/repair, exept if it is gonna go worse.
So I'll keep it. Does your problem is so noticeable?
andreawars said:
The problem for me it's just a little and not worth a change for defect.
Because a repairing stores told me that quite always somewhere that little little darker side happear. It's not guarranteed that with a replacement it would not happear elsewhere. It's happening only with the White. Normal use the tablet is fine.
It's an issue of the IPS display, expecially large displays. That's Why i love the AMOLED all the way.
Technician said it's not for a change/repair, exept if it is gonna go worse.
So I'll keep it. Does your problem is so noticeable?
Click to expand...
Click to collapse
It is, the whole left side is darker, so I contacted for replacement. Amazon was very helpful and the replacement is coming to me. Hope that unit will be be without darker sides.
Thanks for help.
kaimyns said:
It is, the whole left side is darker, so I contacted for replacement. Amazon was very helpful and the replacement is coming to me. Hope that unit will be be without darker sides.
Thanks for help.
Click to expand...
Click to collapse
Did you had this issues also with other colors? If you were watching a movie or working on a picture was noticeable?
For me it's only the White, but you do have to look for it. It's same issues that have low/mid ranged TVs.
Not worth a change or a repair. Because it can ne elsewhere.
Does it is the same for you?
Keep us updated.
andreawars said:
Did you had this issues also with other colors? If you were watching a movie or working on a picture was noticeable?
For me it's only the White, but you do have to look for it. It's same issues that have low/mid ranged TVs.
Not worth a change or a repair. Because it can ne elsewhere.
Does it is the same for you?
Keep us updated.
Click to expand...
Click to collapse
Yes, there was also a problem with other brighter colors. It was noticable only when browsing, but that's mainly what I do with a tablet. After a while I started searching for that darker side in various apps/colors, instead of enjoying a tablet.
Today I got a replacement. The screen looks more or less fine on the sides/edges both with white and other colors.
my m5 pro 10.8 is perfectly in balance.
iv´e tested with a white fullscreen wallpaper on max. brightness. everything is ok.
also other colors are fine.
...
every M5 screen has it. I had 3 pieces, each one had a near the status bar (battery, hour) visible only at a sharp angle. If you do not see it, you look at it badly. I stayed with the first copy. These two still had dead pixels. This is the construction of ips.
yeah i have no issues on mine, full brightness and looking from sharp angles doesn't make much difference at all. Slight brightness changes maybe, but same happens to any screen.