Related
Hi
I was using the "ROM for Prophet ShadoW 1.0 (Vista Edition)( Clean Edition )" and encountered numerous problems with this rom so decided to revert back to my previous rom "PDAVIET". I plugged my deviced in and attempted to run the "batch file" followed the dos cmd prompts and ended up with the frozen screen.
1. Hard reset does nothing it just shows the boot screen and freezes
2. Whenever i try to install a rom it says device is not detected
Here are some details
I was using the Prophet Shadow 1.0 VU
Trying to run upgrade_rom.bat from PV_4.0.0.0.6_Touch when it happened
HT PRophet
G3 Version
last hard reset was now (just after it happened) whenever i format it it just does it really quickly like its not really doing anything
Cant soft reset the device
Cant shutdown
Device can no longer be detected
IPL 1.00
SPL 2.G£.4PDA
GSM 02.47.21
OS 4.0.0.0
Basically the os cannot boot properly therefore it cant be detected i need some sort of auto boot program
Can anyone help
try this..
http://forum.xda-developers.com/showthread.php?t=361335
Rivadex said:
Hi
I was using the "ROM for Prophet ShadoW 1.0 (Vista Edition)( Clean Edition )" and encountered numerous problems with this rom so decided to revert back to my previous rom "PDAVIET". I plugged my deviced in and attempted to run the "batch file" followed the dos cmd prompts and ended up with the frozen screen.
1. Hard reset does nothing it just shows the boot screen and freezes
2. Whenever i try to install a rom it says device is not detected
Here are some details
I was using the Prophet Shadow 1.0 VU
Trying to run upgrade_rom.bat from PV_4.0.0.0.6_Touch when it happened
HT PRophet
G3 Version
last hard reset was now (just after it happened) whenever i format it it just does it really quickly like its not really doing anything
Cant soft reset the device
Cant shutdown
Device can no longer be detected
IPL 1.00
SPL 2.G£.4PDA
GSM 02.47.21
OS 4.0.0.0
Basically the os cannot boot properly therefore it cant be detected i need some sort of auto boot program
Can anyone help
Click to expand...
Click to collapse
Hey hey~~~
GO HERE, have a look
http://forum.xda-developers.com/showthread.php?t=353547
hi
Thanks guys, i am unable to move any files on my device because i can now only get the rainbow screen. My phone cannot be detected by active sync.
When i try to run an RUU it does a little more then it previously did in terms of shpwing me the percentage bar (installation process) but my rainbow screen turns off and then i get an error message.
Now the rainbow screen appears every few minutes on its own and goes off again.
Am i misunderstanding what your saying?
Rivadex said:
hi
Thanks guys, i am unable to move any files on my device because i can now only get the rainbow screen. My phone cannot be detected by active sync.
When i try to run an RUU it does a little more then it previously did in terms of shpwing me the percentage bar (installation process) but my rainbow screen turns off and then i get an error message.
Now the rainbow screen appears every few minutes on its own and goes off again.
Am i misunderstanding what your saying?
Click to expand...
Click to collapse
GO HERE, have a look
http://forum.xda-developers.com/showthread.php?t=353547
read all !!!!
Run PVtemp to recover...................................
Thanks for your help. I will have a look tomorrow because even though i am reading your instructions i am still not understandingh it.
1. The first method isnt possible because i cannot see the device to move files into it
2. With the second method i cannot find the PVTemp you mention
I am not too good with this so it will take time for me to get what your saying.
Thanks again - i will charge my phone overnight to make sure my battery is ok
Update: Phones now working fine, it was my battery that needed charging
Thank you dioxda2 and duato for your help
Hi all,
I've been using Erofich's WM6.1 Standard rom for some time now and decided to try WM6.1 Pro having used it briefly in the past. Anyway, long story short - I flashed following the usual procedure using img-93233-RUU_STAR100_WM61PRO_V2.exe and the process failed around 40%
No big deal I think, re-flash and go again, however, the device now boots to the tricolor boot loader screen and I can't progress any further.
I've tried flashing from, WM6.1 Standard Erofich & a stock rom I have lying about (RUU_STAR100_3.6.251.0_02.67.30_QtekEUR_Ship.exe) but both timeout with the error 260, device couldn't be found.
I've also tried flashing from my FAT32 formatted SD card using the stock rom named as STARIMG.nbh and the WM6.1 Standard Erofich out of desperation.
Is this thing goosed?
lackobrain2 said:
Hi all,
I've been using Erofich's WM6.1 Standard rom for some time now and decided to try WM6.1 Pro having used it briefly in the past. Anyway, long story short - I flashed following the usual procedure using img-93233-RUU_STAR100_WM61PRO_V2.exe and the process failed around 40%
No big deal I think, re-flash and go again, however, the device now boots to the tricolor boot loader screen and I can't progress any further.
I've tried flashing from, WM6.1 Standard Erofich & a stock rom I have lying about (RUU_STAR100_3.6.251.0_02.67.30_QtekEUR_Ship.exe) but both timeout with the error 260, device couldn't be found.
I've also tried flashing from my FAT32 formatted SD card using the stock rom named as STARIMG.nbh and the WM6.1 Standard Erofich out of desperation.
Is this thing goosed?
Click to expand...
Click to collapse
try this touch's manual
http://forum.xda-developers.com/showthread.php?t=347700
Erofich said:
try this touch's manual
http://forum.xda-developers.com/showthread.php?t=347700
Click to expand...
Click to collapse
Thanks for looking at this thread Erofich, I downloaded several different versions of mtty but all those with a USB option in the menu simply state "USB port can not open"
I heard mention that v1.46 works a little better but can't find it anywhere.
I've rebooted the PC & phone, disabled ActiveSync USB connections etc.
I see the USB display in the boot loader toggle on/off when I connect/disconnect from my XP box, but no sign of anything in Device manager
Not looking so hot I think?
there is a problem like yours, and it has been solved
http://forum.xda-developers.com/showthread.php?t=330694
UPDATE
Erofich said:
there is a problem like yours, and it has been solved
http://forum.xda-developers.com/showthread.php?t=330694
Click to expand...
Click to collapse
OK, I think this is my **** up, I pulled down the iMate shipped WWE rom and dropped that on the SD card and it find's it first time. This could mean one of 2 things I think
1: I'm an idiot for using the QTEK stock rom not the IMATE rom on my iMate device
2: Placing the battery cover held the SD card in tighter??!
Upshot is, I'm running again - do I try the Pro or stick with Standard?! I'll let you know how it pans out
Thanks for your help
I've since re-flashed to WM6.1 Pro V2 and everything went fine. I'm not sure what happened to the first attempt & can only assume I cocked up attempting to flash from SD card first couple of times round.
Loving the work on Pro by the way Erofich
hey guys, im having major issues with my HTC HD2.
I have upgraded my rom previously and it worked fine. i just did the telstra one off the htc website.
STATS:
os version: 5.2.21869 (21869.5.0.82)
manila version: 2.5.20121431.1
ROM version: 1.72.841.0 (82124) WWE
ROM DATE: 02/23/10
Radio version: 2.07.51.22_2
protocol version: 15.32.50.07U
I am now tryign to upgrade once more because im having software issues with my current set-up, hoping a rom upgrade will solve it. but, i cant upgrade my rom! i am using CustomRUU.exe as the host program for running the .nbh files. i have tried artemis's latest rom, radio uprgrades, andriod ports, maxsense cooked roms, everything! and i cant get it to get past this screen.
so the issue. i hook up my HTC HD2 to my computer connect via activesync, i then drag the chosen .nbh file on to CustomRUU.exe and run the file and the rom upgrade, im doing everything they say and my htc is hooked to the computer with the arrow things confirming. i do the acceptance steps, and it gets to the progress bar and sits a 0% (on my laptop) while my HD2 works through it.
it goes to the red green blue screen, says USB down the bottom, goes black and displays a HTC loading screen with a progess bar at 0%
this is where the issue is.
it stays at 0% for about 5-10 minutes, on BOTH the hd2 and the laptop, than the computer gives me an error code [262] : UPDATE ERROR...(i am aware that this is a connection error and should resolve with restarting for the computer and the device and a new usb port used)... but this has not solved my problem. as soon as my HD2 restarts and goes to the red green blue screen i lose connection with the computer and it times out. My HD2 just loads the htc progress bar screen and does nothing
i dont even get 1%!!!!
i have tried installing HSPL but it says i need sspl 1.42.000 (i think), so when i try to install that via a rom or whateva it is, it gives me the no connection freezing issue.
im stuck in a violent circle and get get past this issue.
basically, the rom uprgrade wont work because my device is apparently disconnected form the computer and the install times out.
someone please help! PLEASE!
im sorry if this is a simply fix and im being a noob, but i just am stuck real bad!
thanks in advance guys
ryan
start with HSPL!!!
ryan whitmore said:
I have upgraded my rom previously and it worked fine. i just did the telstra one off the htc website.
Click to expand...
Click to collapse
Changing to a customized ROM is very different from upgrading through HTC website , and it starts by installing HSPL on your phone..
you should start here
http://forum.xda-developers.com/showthread.php?t=609477
but its probably easier to resolve your current "SW issues" than installing a customized suitable ROM for you at this stage.. so why dont you post what the SW issue is instead.. (unless your phone does not boot at all now..)
rgds
just quickly, sw issues?
SW issues
ryan whitmore said:
I am now tryign to upgrade once more because im having software issues with my current set-up, hoping a rom upgrade will solve it.
Click to expand...
Click to collapse
software issues = SW issues
Depending on what your Software problems are you could try to post them and try to solve it.
The fastest ways is to install the right HSPL you can use the link in the post of "ugguggh" which has a good manual about how all works. You also can read through the 1st two posts in de threat displayed below. Here you cna find which HSPL you need for your version.
CLICK HERE!
After installing the right HSPL its just a matter of choosing your desired ROM and install it.
I'm currently working with the Artimis V27 ROM NL and i'm not experiencing any problems it runs very smooth. Just format your SD card and try to download Task29. First run "Task29" before installing the ROM. It cleans up old stuff from your old ROM install. After Task29 finished press volume down before it reboots your phone so you enter the bootloader. Now you can start the CustomRuu application and install your desired rom. (if you enter a blanc HTC screen after Task29 (thats normal because there is no OS to load anymore) just remove the battery and hold volume down while putting the battery back or using the power on button)
ryan whitmore said:
i am using CustomRUU.exe as the host program for running the .nbh files. i have tried artemis's latest rom, radio uprgrades, andriod ports, maxsense cooked roms, everything! and i cant get it to get past this screen.
so the issue. i hook up my HTC HD2 to my computer connect via activesync, i then drag the chosen .nbh file on to CustomRUU.exe
Click to expand...
Click to collapse
dont do that, put customruu and the nbh in a folder on their own, then right click customruu and choose run as administrator (do this even if you are logged in as administrator)
and run the file and the rom upgrade, im doing everything they say and my htc is hooked to the computer with the arrow things confirming. i do the acceptance steps, and it gets to the progress bar and sits a 0% (on my laptop) while my HD2 works through it.
it goes to the red green blue screen, says USB down the bottom, goes black and displays a HTC loading screen with a progess bar at 0%
this is where the issue is.
it stays at 0% for about 5-10 minutes, on BOTH the hd2 and the laptop, than the computer gives me an error code [262] : UPDATE ERROR...(i am aware that this is a connection error and should resolve with restarting for the computer and the device and a new usb port used)... but this has not solved my problem. as soon as my HD2 restarts and goes to the red green blue screen i lose connection with the computer and it times out. My HD2 just loads the htc progress bar screen and does nothing
i dont even get 1%!!!!
i have tried installing HSPL but it says i need sspl 1.42.000 (i think), so when i try to install that via a rom or whateva it is, it gives me the no connection freezing issue.
im stuck in a violent circle and get get past this issue.
basically, the rom uprgrade wont work because my device is apparently disconnected form the computer and the install times out.
Click to expand...
Click to collapse
use a usb port around back of the pc, not in the front case.
the 'you need 1.42.0000...' is wrong, its old info. Use hspl3 and choose 2.08.hspl
THANKYOU! but here are my sw issues
hey guys thankyou for all ur help, i downloaded hspl3 and it worked and i have tested a few different roms,, and i installed Miri_HD2_WM65_21908_Sense25_V17.0_WithSwype, which is working quite well right now and i am pretty damn happy with it so far.
i installed S2U2 and since then it started to play up a lil..
the issues are that in general the whole entire system is slow. not neccesarilly windows but sense... :\
messages are sometimes unusable, frozen very laggy, and occasionally needs a soft reset. phones is unusable, can make calls, just cant hear dialtone, microphone sender and recevier isnt working, NO SOUND! shortcut calender viewer on the sense homescreen takes mins to hours to load appointments and sometimes doesnt for days. and in saying sometimes is lightning quick...???
besides that i am not experiencing many other issues YET...i will have to wait a few more days. though i would really like a solution to the phone issue if that is possible
would love to beable to use a android port (a very good, everyday use version), and if anyone has any info on it, would u beable to post some for me please
i have tried haret and it wont work. i load clrcad then haret it runs through the first stuff, then the screen starts to fad and i get lines on the left then it slowly goes black and nothing happens. requires a soft reset to get the phone working again..
I AM JUST FULL OF ISSUES! sorry guys
anyways thankyou EVERYONE for all your help u have been great so far
thanx
ryan
Hi there,
I have some problems, which I cant solve using your forum.
So Im posting this.
Yesterday my Leo shut down and I couldnt turn on it. Today I've trided Hard Reset, but nothing was made. i can turn my phone on with white screen only. So i decided to reinstal ROM. I'v set up the bootloader and start installing oryginal ROM for HTC. And the installation is going to 1 % and then the phone stops instalation and turns on with white screen only.
What an I doing wrong?
looking for original firmware for your phone on htc.com, using the S / N
I have the same problem !!!
I've tried original from htc site, still the same.
If its important, when I'm installing, on the instalation Window, where should be written the current wersion of my soft, there's norlng, just empty place.
maybe I should do something like formating my htc or instal something other than ROM?
thx for help!
you could try to flash with sspl. maybe you have installed the 3.14 rom and removed the hspl.
tycz said:
I've tried original from htc site, still the same.
If its important, when I'm installing, on the instalation Window, where should be written the current wersion of my soft, there's norlng, just empty place.
maybe I should do something like formating my htc or instal something other than ROM?
thx for help!
Click to expand...
Click to collapse
1.try task 29(find on xda) and after that installing HSPL3.
2.after this flash any rom (including stock but i wouldn't recommend newest as we don't have newest hspl and you'll be stuck with, or you will have very small ram(50mb) if you keep older one)
I can't run task 29 from bootloader, the same problem as with ROM, it stops on 0%.
maybe some advices how to run task 29 on bootloader, maybe im doind sth wrong?
I think we have the same problems,
aktiv sync dont work, bootloader modus works,
cant find any solution in the forums,
i have tried flashing from pc and from sd card, no success
what about couple of hard resets on boot(hold down volume buttons) and perhaps try another computer or USB cable-if your friend has one newer etc...
i know from the times i had Omnia that RUU can have probs with computer also.
And have a look at this could help..
i tried all of your tipps but nothing works.
Hspl 2 and 3 do not work.
Here my bootloader information:
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
Please help!
Did you update your ROM or Radio version? I read that white screen occurs due to incompatible Radio version.
Anyways, I screwed up my OS today by installing 'Gaz Touch Tools' and on reboot my phone showed some file was missing.. nothing was working.. phone wasn't responding well. couldn't even connect via activesync.. Right now installing Official ROM using MicroSD card.
Update in progress..
RADIO_V2 - OK
RCUST - OK
BOOTLOADER - OK
SPLASH1 - OK
OS -
CONFIGDATA -
EXTROM -
^ as the progress bar increases, the blank spaces change to OK
What I did - Formatted the MicroSD using FAT32, extracted the RUU_signed.nbh from the exe downloaded from HTC website and renamed it to LEOIMG.nbh and copied it on MicroSD card. Inserted card properly in device, started device by holding volume down button. Voila!
Update: Done installing, working fine!
Got the same problem with mine straight out if the box. SPL-1.42.0000
Charging light not working. Sometimes it goes in to bootloader when powering on and sometimes white screen with logo. I'm not impressed!
I didn't want to have to start a new thread, but I'm at a loss for what else to do. =/
I've been flashing back and forth between Android and WP7 for several months now, without any problems, but now that I need to revert the phone back to stock WinMo 6.5, it's just not working. Any ROM I flash, the phone boots into the white screen with green "HTC" logo, then shows the lettering in the bottom corner detailing ROM and Radio and whatnot, then that's it. It just sits at that screen indefinitely.
I've got a UK-spec unlocked HD2.
In the tri-colour bootloader screen it currently shows:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
The ROM is the official HTC WWE ROM - RUU 3.14.405.2 with Radio 2.15.50.14.
I've tried Task29'ing my phone, flashing via USB, flashing via an 8GB FAT32 MicroSD card, and nothing seems to work, it always flashes, reboots, and then hangs at the white screen with green HTC logo and red lettering in the corner. I'm at a loss. I need the phone reverted to stock as I'm recycling it and they won't accept it with Android (obviously). =/
If I've missed something obvious, I'm really sorry - any and all help and/or scathing criticism is greatly appreciated.
Update - I just tried a custom ROM, using HSPL4 to change to SPL-2.08.HSPL, and it has the exact same problem. Flashes just fine, then hangs at the screen with the red lettering in the corner. What on earth is causing this? =/
Has anyone got any ideas? =[
Task29 only works with HSPL on your HD2.
Try to install SPL3.03 again by using HSPL4.
Have you tried to boot your HD2 without SD card inserted?
Have you tried to make a hard reset by removing the battery, waiting a few seconds, inserting the battery, pressing and holding the volume up and down buttons at the same time and pressing the power on button while holding the volume buttons?
By the way there are many threads with the same topic like yours with different solutions. Just use the search function with keywords "hd2 stuck white screen".
uli71 said:
Task29 only works with HSPL on your HD2.
Try to install SPL3.03 again by using HSPL4.
Have you tried to boot your HD2 without SD card inserted?
Have you tried to make a hard reset by removing the battery, waiting a few seconds, inserting the battery, pressing and holding the volume up and down buttons at the same time and pressing the power on button while holding the volume buttons?
By the way there are many threads with the same topic like yours with different solutions. Just use the search function with keywords "hd2 stuck white screen".
Click to expand...
Click to collapse
Yeah, I had 2.08.HSPL installed coming from my Android NAND ROM. I Task29'd the phone to clear out the NAND.
I've booted it without the SD card inserted, no difference. I've hard reset it (forgot to mention this in the original post =/) and it makes no difference.
And I've searched through the threads - there was nothing specific to my problem that I could find, hence my posting here. All the "Stuck at white screen" threads usually have had a problem with flashing the ROMs, or the radio hasn't installed, or they're stuck at the screen before the red lettering shows up in the bottom corner. =/
Everything about it suggests my phone should work - the ROM flashing never fails, the bootloader always shows that the ROM has installed correctly, and the white HTC screen confirms that ROM/Radio etc. have all been flashed. It just stays at the white screen with green HTC logo and the red lettering, it never moves beyond there. I've tried two stock ROMs, and a custom ROM. All have installed, all have frozen at the same point, the screen with the radio and ROM information in red lettering. =/
Maybe it's because of the combination of (H)SPL, RADIO AND ROM???
Have you tried to install WP7 or Android again, just for testing?
Sometimes, but seldomly, it seems there are leftovers from HSPL 1.66 or 2.08 altough bootloader shows SPL2.08 or 3.03 which are causing difficulties.
Try to install and remove HSPL2.08 by using HSPL2_RUN.exe before you start flashing a new ROM. Some useres in different threads reported to solve strange behavior be doing this procedure.
Good luck.
I just flashed magldr and a NAND ROM to it, both worked flawlessly, and it's now running Android as it always has, no issues.
I'll try flashing a WinMo ROM now, and see if it accepts it. If not, I'll try HSPL2_RUN and see if that helps anything. Thanks for your help =].
uli71 said:
Maybe it's because of the combination of (H)SPL, RADIO AND ROM???
Have you tried to install WP7 or Android again, just for testing?
Sometimes, but seldomly, it seems there are leftovers from HSPL 1.66 or 2.08 altough bootloader shows SPL2.08 or 3.03 which are causing difficulties.
Try to install and remove HSPL2.08 by using HSPL2_RUN.exe before you start flashing a new ROM. Some useres in different threads reported to solve strange behavior be doing this procedure.
Good luck.
Click to expand...
Click to collapse
I tried installing and removing HSPL2.08 with HSPL2_RUN.exe. I then installed SPL1.66.0000, and flashed the WWE 1.66 ROM. It flashed fine, rebooted and... Nothing. It's still hanging at the white screen with green HTC logo and red information in the corner. I'm beyond confused as to what could be causing this. Everything about my phone is telling me the ROM has flashed. It's even charging while off, and the LED changes from orange to green when it's full. The Android NAND ROM I flashed confirmed this. *flummoxed*
That sounds really strange...
Last thing you can try:
- be sure to have SPL1.66 on your HD2 by using HSPL2_RUN.exe
- format you SD card by using SD Formatter and a card reader
- download latest STOCK ROM 3.14 again from HTC homepage by using your HD2's serial number
- extract the downloaded file by using 7-zip or something similar
- copy the ruu_signed.nbh file to your SD card by using a card reader
- rename the ruu_signed.nbh file on your SD card into LEOIMG.nbh
- remove your HD2's battery
- wait a few seconds
- insert battery and SD card
- press and hold volume down button and press power button while volume down button is pressed
- release the buttons when you HD2 is powering up
- follow the instructions given on the HD2's screen
One of my step by steps, but I believe you know how to flash ROMs with SD card method.
I just tried following your steps... nothing . Although, I did notice this time, flashing via SD card, that the update failed. It got part of the way through then stopped and changed to the black screen with the grey warning triangle. When I loaded back into the bootloader, it briefly showed "ROM upgrade error, please try again" and RUUNBH in the top corner, but it then proceeded to load the update from the sd card and install it. The update worked, I rebooted the phone, but again it stuck at the white background, with the green HTC logo and red lettering. Once again the red lettering and the bootloader are saying the flash was successful... but I've left the phone for half an hour and it doesn't progress beyond the white screen.
Is there any reason it failed, then flashed, says it's flashed, but isn't booting?
Sorry, but I have no answer to your question.
Sadly I have no further ideas how to reactivate your HD2 with WM6.
Maybe there is another guy having a solution.