hello
i want Samsung Galaxy S2 Drivers for windows 7
i don't want download kies because my internet is slow
It should work fine without installing any drivers on Windows 7.
You should enable the USB Debugging mode from Settings -> Applications -> Development. That way it won't try to connect in Kies mode and Windows 7 should have proper drivers for it.
ayamary said:
It should work fine without installing any drivers on Windows 7.
Click to expand...
Click to collapse
Are you sure ?? because i want root him using superoneclick
guys please i want the drivers..i open odin the yellow rectangle doesn't show because i don't have the drivers
-juanito- said:
i want Samsung Galaxy S2 Drivers for windows 7
Click to expand...
Click to collapse
http://www.filesonic.com/file/1941841404
Thanks Odia!
64 bit - http://drivers.softpedia.com/progDo...SB-Driver-for-Windows-x64-Download-96693.html
Sent from my GT-I9100
32 bit - http://drivers.softpedia.com/progDo...SB-Driver-for-Windows-x86-Download-96692.html
Sent from my GT-I9100
avidahiya said:
64 bit - http://drivers.softpedia.com/progDo...SB-Driver-for-Windows-x64-Download-96693.html
Sent from my GT-I9100
Click to expand...
Click to collapse
thank you
http://bit.ly/qWA6Qt
You are welcome
Sent from my GT-I9100
avidahiya said:
32 bit - /Samsung-Galaxy-S-USB-Driver-for-Windows-x86-Download-96692
Sent from my GT-I9100
Click to expand...
Click to collapse
It's Galaxy S drivers, not the S2 ones
_gege said:
It's Galaxy S drivers, not the S2 ones
Click to expand...
Click to collapse
Well it's the same It's a package that includes Samsung phone drivers.
knightnz said:
http://bit.ly/qWA6Qt
Click to expand...
Click to collapse
First results point to this thread )
Galaxy SII USB drivers
Hello,
I installed the drivers from the above post (Samsung-Galaxy-S-USB-Driver-for-Windows-x86-Download-96692 ....) on a W7 PC and I keep getting the message from the OS that the drivers could not be installed correctly. If I go to the Device Administration screen in the control panel, when I connect the phone I get "SAMSUNG mobile USB Composite Device" with a warning sign and when I double click on it it says Code 37, Windows cannot initialize the device controller for this HW.
Same thing with XP in another PC.
Any suggestions?
Thanks!! Guido.
gco12f said:
Hello,
I installed the drivers from the above post (Samsung-Galaxy-S-USB-Driver-for-Windows-x86-Download-96692 ....) on a W7 PC and I keep getting the message from the OS that the drivers could not be installed correctly. If I go to the Device Administration screen in the control panel, when I connect the phone I get "SAMSUNG mobile USB Composite Device" with a warning sign and when I double click on it it says Code 37, Windows cannot initialize the device controller for this HW.
Same thing with XP in another PC.
Any suggestions?
Thanks!! Guido.
Click to expand...
Click to collapse
try to check my mediafire folder(sig)...drivers are for all sammys phones & i'm using the same ones on my lappy(winXp)...
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Sent from my SGS-II powered by CM9
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
sometimes you have to unistall drivers and try again a few times, worst case scenario use the phone as mass storage instead of mtp
hi friends i have a same problem i dont want to install kies on my pc i download and install usb drivers i want to turn on my mobile in mass storage and its going to usb storage sucessfully but not showing any of my usb drive plz help
i just instal that pack (i9000 driver pack for win 7 64) an connect my phone in download mode and it will be ok?
Related
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Srsly? Noone care to respond?
google it for samsung usb driver
then download and install
XeactorZ said:
google it for samsung usb driver
then download and install
Click to expand...
Click to collapse
Thx for reply, but ofc I already done that.
Install Kies, it should be enough
《tapatalked from galaxy s3》
compatibility mode
nerotix said:
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Click to expand...
Click to collapse
Try right click - compatibility mode you should be able to install.
bala_gamer said:
Install Kies, it should be enough
《tapatalked from galaxy s3》
Click to expand...
Click to collapse
Samsung Kies 2.3.3.12085_7_5 work with Windows 8 9200...:good:
I'm using windows 8 x64, I had no trouble installing the drivers.. I just put the phone in download mode and connected the usb cable and the drivers were automatically installed.
Sent from my GT-I9300 using xda app-developers app
Hello all.
I too have Windows 8 RTM 9200 x64.
Kies 2.3.3.12085_7 INSTALLS fine, and the app RUNS fine.
Also, when I put the phone in download mode, Win8 DOES automatically find a device, but....
1. Kies can never find the phone (obviously not when in download, I mean in normal mode). Just keeps telling me to turn off debugging (which is not on!). Tells me: "Reconnect the device in Samsumg Kies (PC Studio) mode. Current connection mode not supported by Kies. Check USB settings."
2. Odin 1.85, 1.87 and 3.04 can never see the phone in download mode. Just nothing as if not connected.
For you guys who have it working in Win8, can you confirm that Kies can actually SEE the phone (running the app is the easy bit!), and that if you go into download mode, that Odin can see the device?
I can pass things thru on a virtual USB port to a Virtual Machine of Win7, but cant never actually get any functional use in (host) Win8.
Thanks.
EDIT: I downloaded Kies from Samsung page and it seems to be very slightly newer than mine, now version 2.3.3.12085_7_5. NOW, Odin CAN see the device in download mode which is what I really wanted for flashing purposes. Kies itself now no longer instantly complains about the USB setting, but iinstead just spins its wheel and never connects. But Kies stinks and never use it anyway, so not too fussed. Really just wanted Odin so that's cool.
Downloaded THIS Kies: http://www.samsungapps.com/about/onPc.as
Can you extract the USB Driver msi from the instllation and upload it here? Thanks!\
Edit:
Found it!
http://www.mediafire.com/?4y1a2opm8o3ihfx
Now my Note is back under my Windows 8 64x RTM!
Interesting!
Your mediafire download LOOKS like the same version that my Kies installed, but when I installed your version over my pre-existing one, now Kies can see my phone!
Excellent!
Thanks!
Hope this all helps someone else too.
I ran Windows 8 for exactly 2 days. I ain't gonna touch that with a 10ft pole ever again. Went back to Win7.
Lemme just tell ya: Windows 8 sucks big time. It's so bad it both sucks and blows at the same time.
nerotix said:
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Click to expand...
Click to collapse
¦¦
\/
Signature that should help you ^^
EDIT: Use the search button. Prevemts spam, and unneccessary threads, like this. I posted that thread in the Android general Discussion and Galaxy Nexus forum. Works on all phones..
I love windows 8 and am going to give these a go. Thank you.
Sent from my SCH-I535 using xda premium
nerotix said:
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Click to expand...
Click to collapse
i just installed win 8 m gonna try win 7 drivers in compatibility mode...will let you knowifit works
---------- Post added at 04:53 PM ---------- Previous post was at 04:37 PM ----------
nerotix said:
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Click to expand...
Click to collapse
hi i just tried windows 7 usb drivers for s3......and guess what ...................IT WORKS.....all you have to do is run the drivers in compatibility mode and select windows seven
First right click on the divers file and select properties
then select compatibility
select "run this program in compatibility mode for"
then select windows seven in the drop down menu
and then select "Run this program as an Administrator"
and then press OK
DONE
double click the driver file and install it.........Enjoy
Simonetti2011 said:
I ran Windows 8 for exactly 2 days. I ain't gonna touch that with a 10ft pole ever again. Went back to Win7.
Lemme just tell ya: Windows 8 sucks big time. It's so bad it both sucks and blows at the same time.
Click to expand...
Click to collapse
Using a 4 year old Dell Latitude XT2 that originally came with Vista on it with a fresh install of Windows 8. Love the device. Multi touch screen works right away and all features work great. Having a blast with Windows 8. Just need the right hardware and it is a perfect operating system. Best of both worlds, tablet and laptop.
There's no need to install Kies to use the phone as mass storage.
Only if you want to flash things though Odin.
I'm using Windows 8 Pro 64bits and I can confirm this. :good:
Windows update Will do the job.
Connect the phone and then search on Windows update.
Sent from my GT-I9300 using xda app-developers app
Hi, got Kies update to 2.5.0.12094_28 and everything works fine under Win8. Drivers insatlled, phone found. The update has got todays date, Nov/10/2012.
Windows 8 upgrade went fine with the samsung/android drivers.. Infact everything is fine on my end (Full win7 img) just incase
Sent from my Transformer Prime TF201 using xda premium
After flashing my phone a few times with different roms my pc running windows 7 64x gave me an error message when my phone was connected saying hardware I'd missing windows could not detect the device plugged in sometimes it works other times it doesnt. It this something to do with kies? Or have I acualy wiped something from the phone by accident I flash over 30 roms n never had an issue with any. Except ressurection remix jelly bean witch the wifi wouldn't turn on but apart from that all good. Any tips?
Sent from my GT-I9100 using xda premium
Clean drivers and reinstall. I had same problem. And be careful i lost my imei last night and recovered it. Because of rom flashinh all the time
Skickat från min GT-I9100 via Tapatalk 2
Jeez that's steep likes. N Yeh I have reinstalled the drivers a few times before even went as far as reinstalling my computer os. It never happens when I'm running a good stable rom strangely enough but when I reverted back to stock GB on the s2 it happens all the time weird likes. Anyways thanks for replying
Sent from my GT-I9100 using xda premium
mikey banner said:
Jeez that's steep likes. N Yeh I have reinstalled the drivers a few times before even went as far as reinstalling my computer os. It never happens when I'm running a good stable rom strangely enough but when I reverted back to stock GB on the s2 it happens all the time weird likes. Anyways thanks for replying
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Could be problem with cable or port but if working on other roms except Gb then the problem may be with ur flashing package
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]
mikey banner said:
Jeez that's steep likes. N Yeh I have reinstalled the drivers a few times before even went as far as reinstalling my computer os. It never happens when I'm running a good stable rom strangely enough but when I reverted back to stock GB on the s2 it happens all the time weird likes. Anyways thanks for replying
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
The solution to your problem is here:forum.xda-developers.com/showthread.php?t=1837434&highlight=hardware+id
Swyped from my Samsung Galaxy SII
I'm having the same problem, and none of the solutions mentioned works for me.
The problem only occurs when the phone is connected to my machine running Windows 7 64-bit. It doesn't happen on another computer running 32-bit Windows 7.
I assume the problems lies with the 64-bit drivers.
Chris in Makati said:
I'm having the same problem, and none of the solutions mentioned works for me.
The problem only occurs when the phone is connected to my machine running Windows 7 64-bit. It doesn't happen on another computer running 32-bit Windows 7.
I assume the problems lies with the 64-bit drivers.
Click to expand...
Click to collapse
Probably, although i don't have these problems.
Try this:
Uninstall Samsung drivers, reboot pc then reinstall Samsung drivers in compatibility mode.
Swyped from my Samsung Galaxy SII
Jokesy said:
Try this:
Uninstall Samsung drivers, reboot pc then reinstall Samsung drivers in compatibility mode.
Click to expand...
Click to collapse
Thanks for the suggestion. I'll give it a try.
To do that would I just uninstall Kies, reboot, and then reinstall Kies using Windows XP Compatibility mode?
Sounds like its completely nothing to do with Samsung/Kies. The problem lies within Windows update I believe.
Sent from my GT-I9100 using xda premium
Chris in Makati said:
Thanks for the suggestion. I'll give it a try.
To do that would I just uninstall Kies, reboot, and then reinstall Kies using Windows XP Compatibility mode?
Click to expand...
Click to collapse
1. Uninstall kies (Samsung USB drivers still be left after uninstalling kies)
2. Uninstall all Samsung drivers
3. Reboot pc.
4. Reinstall kies
5. Reboot pc
Done
Swyped from my Samsung Galaxy SII
Jokesy said:
1. Uninstall kies (Samsung USB drivers still be left after uninstalling kies)
2. Uninstall all Samsung drivers
3. Reboot pc.
4. Reinstall kies
5. Reboot pc
Click to expand...
Click to collapse
I had already tried that before I posted here - several times in fact. It was the "compatibility mode" you mentioned that I was interested in trying. How do I do that? Is that just a matter of reinstalling Kies in Windows XP compatibility mode?
Yes. Install it in compatibility mode for Vista but Xp.
I know you have tried my steps before but just follow it. Replace install kies with install kies in compatibility mode
Swyped from my Samsung Galaxy SII
Jokesy said:
Yes. Install it in compatibility mode for Vista but Xp.
I know you have tried my steps before but just follow it. Replace install kies with install kies in compatibility mode
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Just to update this, I followed the procedure you suggested and reinstalled Kies in Windows Vista (Service Pack 2) Compatibility Mode. After rebooting the same problem happened again.
I then uninstalled Kies and repeated everything again, this time installing and running in Windows XP (Service Pack 3) Compatibility Mode.
That seemed better at first, but now I'm getting the "Hardware Id Missing" balloon come up again and Kies cannot see the phone.
Thanks for your help, but I'm still looking for a solution to this problem if anybody has one.
mikey banner said:
After flashing my phone a few times with different roms my pc running windows 7 64x gave me an error message when my phone was connected saying hardware I'd missing windows could not detect the device plugged in sometimes it works other times it doesnt. It this something to do with kies? Or have I acualy wiped something from the phone by accident I flash over 30 roms n never had an issue with any. Except ressurection remix jelly bean witch the wifi wouldn't turn on but apart from that all good. Any tips?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I had the same problem I think it's the 64 bit system and samsung's new update of drivers something that help me was
1. When you plug in your device on your phone screen it has a usb symbol at the top pull down the notification bar
2. Press Connected as media device (mtp)
3. Change from media device (mpt) to camera (ptp)
4 . It should work now
Sorry if this question is already asked, but I searched the forums and could not find it.
But I have a problem/challenge with flashing a bootloader using Odin.
I have the following:
Galaxy Tab P7510, rooted and Galaxy Task13 rom flashed (I did this before I got a Windows 8 OS)
Laptop running Windows 8
Odin 1.85
Installed USB drivers (I think)
I wanted to go to the JellyBean rom. So I looked at the following thread:
[ROM][P75xx][JB][4.2.1] CyanogenMod 10.1 Nightly Discussions (http://forum.xda-developers.com/showthread.php?t=2074202)
I did the following:
- I flashed updated CWM using Mobile Odin
- Then I downloaded the bootloader from the thread.
- I downloaded the USB drivers from the following page: http://wiki.cyanogenmod.org/w/Install_CM_for_p4wifi
- I tried to install these downloaded drivers, but it gave me some problems with compatibility using windows 8, I got a option to install it using a "compatibility mode". I choose this option and the USB driver seemed to install correctly (I got the installation and could install it without any shown problems/errors).
- I opened Odin3-v1.85
- I powered off the Samsung Galaxy Tab 10.1 and connected the USB adapter to the computer but not to the Samsung Galaxy Tab 10.1
- I booted the Samsung Galaxy Tab 10.1 into download mode by holding down Vol Down while connecting via USB
(according the instructions from here http://wiki.cyanogenmod.org/w/Install_CM_for_p4wifi)
Here the problem starts, I cant seem to connect the Tab with the USB. At least if I look at the Galaxy Tab I continuously have the message "connect USB cable". If I look at Odin I don't see the ID:COM become blue or green and see don't see the word added (what in my opinion seems to be meaning that the Tab is not connected with my laptop).
I tryed several things to see if that would work, I mean changing the order of how to connect the Tab to the laptop. But I did not have any success.
I remember when rooting and flashing the Tab before, it was very easy to connect the Tab with Oding to the PC/Laptop, but now I don't have any success.
Could it be that there are problems with using Windows 8 (unfortunately I don't have a Windows 7 PC/laptop available to me the coming week).
So the question is if any of you guys that are more handy in these things got any idea what I am doing wrong and more important got any idea how to fix it.
Hope to hear from someone soon.
Thnx in advance.
pow3rflow3r said:
Could it be that there are problems with using Windows 8 (unfortunately I don't have a Windows 7 PC/laptop available to me the coming week).
So the question is if any of you guys that are more handy in these things got any idea what I am doing wrong and more important got any idea how to fix it.
Hope to hear from someone soon.
Thnx in advance.
Click to expand...
Click to collapse
Upgrade to Windows 7 and you'll be fine.
Does your system see anything when you plug in the tablet? You should at least get some indication that it's recognizing it.
If you bring up the Device Manager (Windows-X key, or Control Panel/Hardware/Device Manager) does the device show up?
(I'm thinking there may be some problem with the cable. I've been burned by that in the past.)
I am just in the progress of indeed installing Windows 7 again.
When I plug in the Tab into this laptop (old one running ubuntu) I dont see anything happening, but the Tab does charge.
So I will wait a few mins again and try it with Windows 7.
Thnx for the reply.
Ok Windows 7 installed and tried again, still no luck.
Still no connection with laptop.
I looked at the device manager and although I don't know where exactly to look I don't see any difference if the Tab is plugged in or not.
As I said, charging seems to be working fine when plugged in the laptop and also when connected to a wall socket.
Hmmm, ok, next step I am gonna buy a new cable and see if this will fix the problem.
Will update when I bought the new cable.
Have you enabled USB Debugging in Developers Options?
Also, did you check MTP in Settings-Storage-menu at top right corner-USB Connection.
Until these are done the laptop will not recognise your tablet at all.
Sent from my GT-P7500 using xda app-developers app
John Kester said:
Have you enabled USB Debugging in Developers Options?
Also, did you check MTP in Settings-Storage-menu at top right corner-USB Connection.
Until these are done the laptop will not recognise your tablet at all.
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
USB Debugging was/is enabled.
Also, did you check MTP in Settings-Storage-menu at top right corner-USB Connection:
Dont know how to do this as I cant find this option, if I go on my Tab to Settings-Storage I dont see this option.
I am not on a stock ROM, but on Task14 Slim ROM.
But when I connect my Tab via usb to my laptop, I get the message in the bottom bar that "USB is connected" and that "MTP is connected". Although I dont see anything happening on my laptop.
pow3rflow3r said:
USB Debugging was/is enabled.
Also, did you check MTP in Settings-Storage-menu at top right corner-USB Connection:
Dont know how to do this as I cant find this option, if I go on my Tab to Settings-Storage I dont see this option.
I am not on a stock ROM, but on Task14 Slim ROM.
But when I connect my Tab via usb to my laptop, I get the message in the bottom bar that "USB is connected" and that "MTP is connected". Although I dont see anything happening on my laptop.
Click to expand...
Click to collapse
If you see "MTP is connected" means the option is already enabled. If autoplay did not work you may not see any action. Open my computer and see if you will find your sdcard mounted as a portable device. Open it.
Sent from my GT-P7500 using xda app-developers app
John Kester said:
If you see "MTP is connected" means the option is already enabled. If autoplay did not work you may not see any action. Open my computer and see if you will find your sdcard mounted as a portable device. Open it.
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
No I do not see any "extra" device in "my computer" when I connect the Tab.
Windows 8 or Windows 7, you should be able to see the device. I recommend going into device manager and deleting the drivers (the option to delete is in the window after selecting uninstall).
Grab these drivers and try http://www.samsung.com/us/support/owners/product/GT-P7510MAYXAB
I use them for my Samsung devices and have no issue ODIN seeing my devices in Win 7 or 8.
nakedninja42 said:
Windows 8 or Windows 7, you should be able to see the device. I recommend going into device manager and deleting the drivers (the option to delete is in the window after selecting uninstall).
Grab these drivers and try http://www.samsung.com/us/support/owners/product/GT-P7510MAYXAB
I use them for my Samsung devices and have no issue ODIN seeing my devices in Win 7 or 8.
Click to expand...
Click to collapse
I did as you said but also with those drivers no succes.
Then I downloaded drivers from the Thai Samsung support site (KiesSetup), because I am in Thailand.
But this was more of a sync program with USB drivers also implemented.
But here also no succes.
Now I am going to the Mall and see if I can buy a new USB cable and hopefully this will solve my problem.
Thnx for the reply's!
Ok, I got a new cable and I can connect the Tab to the laptop again. I am doing some file transfers now and then I am gonna try to flash the bootloader and after that flash the new CM10.1 ROM. Hmmm could as easily just see for a new Nightly the other one is already 2 a 3 days old.
I just used the USB drivers from http://wiki.cyanogenmod.org/w/Install_CM_for_p4wifi
Thnx all for the help.
SOLVED
The problem was the cable, I bought a new cable and I just flashed the bootloader with Odin.
This is how I remember it to be working. Easy, simple and fast!!!!
Again everyone thnx for your idea's/help!!!
You can download just the drivers from here.
http://www.samsung.com/uk/support/model/GT-I9100LKAXEU-downloads
Choose software and then its the 2nd listing. You wont need to install Kies as well then. I have had no problems using these under Windows 8.
Sent from my GT-P7510
Which option in Odin?
Hey,
Could you tell me which option did you use in Odin to flash the bootloader? Was it the PDA slot or Bootloader slot?
Thanks
Allisson
i am bought yesterday samsung galaxy s3 (i9300) when i am connect the phone to the computer his pop up message unknow usb device i was try to replace a cable and computer but nothing work i was install kies and remove drive and reinstall driver but there is no change my rom is ics 4.0.4 and i didnt find any usb settings (mass storage/mtp) in the main settings i am very desperate :crying::crying::crying::crying:
install usb drivers from kies
Sent from my GT-I9300 using xda app-developers app
Z3US911 said:
install usb drivers from kies
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
i have been tried without succses
Just checking, are you sure that you bought an legitimate Samsung Galaxy S3 I9300? Maybe it is a fake? Where did you buy it, was it used before?
Go into settings and then "about phone" and then read what phone model you have.
BTW Kies is the worst crap ever if it comes to Phone management softwares.
Try to uninstall Kies and install only the drivers instead, which you can find here:
http://forum.xda-developers.com/showthread.php?t=2038555
Scarface1991 said:
Just checking, are you sure that you bought an legitimate Samsung Galaxy S3 I9300? Maybe it is a fake? Where did you buy it, was it used before?
Go into settings and then "about phone" and then read what phone model you have.
BTW Kies is the worst crap ever if it comes to Phone management softwares.
Try to uninstall Kies and install only the drivers instead, which you can find here:
http://forum.xda-developers.com/showthread.php?t=2038555
Click to expand...
Click to collapse
Whats your windows version.
If u are on win8 took me 1 hour to make it work properly.
And adb doenst work i olny get mass storage acess
Sent from my GT-I9300 using xda premium
danielad200 said:
i am bought yesterday samsung galaxy s3 (i9300) when i am connect the phone to the computer his pop up message unknow usb device i was try to replace a cable and computer but nothing work i was install kies and remove drive and reinstall driver but there is no change my rom is ics 4.0.4 and i didnt find any usb settings (mass storage/mtp) in the main settings i am very desperate :crying::crying::crying::crying:
Click to expand...
Click to collapse
We need to know what phone you have .
Settings About what is the firmware and baseband .
jje
Hi frends...i have a problem with my android mobile!
I have windows95 pc and an android device(samsung galaxy young duos gt-s6312)
but i can't connect internet in pc by using the phone!
what to do????
samareshbosu said:
Hi frends...i have a problem with my android mobile!
I have windows95 pc and an android device(samsung galaxy young duos gt-s6312)
but i can't connect internet in pc by using the phone!
what to do????
Click to expand...
Click to collapse
Probably due to a driver issue. You are trying to tether right? Have you installed Kies or the Samsung USB drivers?
yes
immortalneo said:
Probably due to a driver issue. You are trying to tether right? Have you installed Kies or the Samsung USB drivers?
Click to expand...
Click to collapse
yes,i have installes samsung usb driver also....
please tell me the procedure to connect internet on pc via usb cable.
samareshbosu said:
Hi frends...i have a problem with my android mobile!
I have windows95 pc and an android device(samsung galaxy young duos gt-s6312)
but i can't connect internet in pc by using the phone!
what to do????
Click to expand...
Click to collapse
its a driver issue. best thing to do is to change your pc oparating system into windows xp or higher.
samareshbosu said:
yes,i have installes samsung usb driver also....
please tell me the procedure to connect internet on pc via usb cable.
Click to expand...
Click to collapse
Simply connect your phone to PC (make sure mobile data is turned on), go to "Settings - Wireless & Networks - More Settings - Tethering and portable Hotspot - USBTethering" and tick it. That should be enough.
If you still can't get it to work, do what @raine0324 suggested. Win 95 is pretty obsolete mate.