Okay, I got qpst to connect to the facinate (its actually one the more stable droids I've used. The connections always work). I got it going great.
I've set my settings in m.ip and they stick, they do not revert to the @vzw3g.com address, they stick to whatever I have it.
Now, when programming PPP Config, I set up the username for UM and AN buttons and they revert back to [email protected].
I hit CTRL+D in the boxes to black them out with red X's, write to phone, then it will reboot but when it reboots its all back to default.
Is there a NV memory code I am supposed to read or change? I had this problem before with evo's, eris's, moto droid 1's and a bunch of other phones, but I could always get it going. For the facinate, I've been googling for 3 days straight and cannot seem to find anyone with this problem that has been answered.
Please someone help me out... all I need to do is make the settings stick in QPST under the PPP Config tab, under UM and AN. (The tethered NAI sticks but the one under it and on the AN page do not.).
The settings under M.IP stay (where you select the active profile or user and set up primary HA and passkey). Those settings stick every time, just ppp config settings are reverting. PPPPLEEEASE help
oh, and of course mobile won't start up now. I'm on stock 2.1-update1. stock
Q and A was one click away
Sent from my SCH-I500 using xda premium
Sorry, I usually post this in the development cause its to do with programming. could a mod move it for me please? or what should I do??
use 2 different versions of qpst,
you have to use qpst build 215 to get the ppp to stick or it will revert to vrz.
So use the build 323 to write everything, then uninstall and then use 215 to install ppp settings that didnt stick. walla.
will try and report back, thanks. Also, if anyone has flashed a moto droid 1 using white rabbit and his generator, i wrote using qpst, did the nv flash using white rabbit file and got a 3g icon finally. So if this doesnt work, i'll be sure to report back in with my findings, but THANKS for that info, i will give that a try too.
moved
darkmage1991 said:
use 2 different versions of qpst,
you have to use qpst build 215 to get the ppp to stick or it will revert to vrz.
So use the build 323 to write everything, then uninstall and then use 215 to install ppp settings that didnt stick. walla.
Click to expand...
Click to collapse
you are exactly correct sir. Hat's off to you for that. I will keep that in mind for other phones. You have done me a solid.
Now, I have tried a couple things. the u2nl and autostart option, this did not work.
After using qpst build 323 i had no 3g, vzw3g.com settings in ppp config. I then did the whiterabbit flash (originally for moto droid 1) and voila, 3g. I then verified the settings using qpst 215 and it was indeed @mycricket.com for both username under UM and AN. THANK YOU....
But alas, no work. So i tried to rewrite the settings, repeat the process, and no go.
In short, I have a 3G Icon, it flashes send arrow (the green one) but will not receive (the orange arrow). Now sometimes both will flash at the same time but thats just for a sec and rarely. Then i get no data. I get no web, no data...
Talk/Text great. Superuser installed, Great. Phone rooted, all is well. I must be overlooking something. Do we need the APN setup for the $45 plan?
I've done this on the HTC eris, MOTO Droid, HTC Evo, Desire, and tons of other phones and its pretty much the same thing but I just can't get this fella to go and I'm sure there is a catch (just like with the rest of them) that I have to do something special....
try this app to get your internet working.
http://www.cricketusers.com/flashin...k45-no-hassle-3g-internet-market-45-plan.html
if internet then works you have an issue with autostart or you didnt set the proxy setting using anycut. anycut proxy is needed for the main browser to work, and autostart/greenk45 for apps to work. if still nothing you need to double check all your settings in qpst make sure there all correct.
As for apn's thats only needed for mms, it is in no correlation to get internet working.
THANKS! I actually just did this, got fed up, flashes it back to stock froyo, root the thing, installed a superuser and autostart.zip via recovery, then did the u2nl and autostart and voila, it just started working.
This happens every time when I do a phone to cricket, i thought there might be a trick i was overlooking but there isn't. Its the same for almost all the droids.
AND THANKS for that app! Gonna flash to cm7 in a few and will try this before I even fool with u2nl. Thanks bro, you the man.
no problem, as for cm7 on the fascinate, i have yet to get mms working so if you manage to get it working let me know how =P
This is so funny... I tried this probably 5 different times and was ready to stomp the motherf###ing sh#t out of my phone and then I grabbed my old 32 bit windows machine and it worked the first time. And actually, I didn't even go through all the steps again, I just used the 2 different QPST's and it worked great. Ha ha, what the hell.
Related
I just got a Mogul today. It's really nice, but I've run into about fifteen brick walls while trying to unlock, flash, and program it so I can use it with Cricket. I used Olipro on it, then I flashed the latest radio to it, and then I flashed Ryan Mogul's ROM to it. I loaded the included Cricket PRL, and then after a lot of frustration I was able to get it to work with QPST. I changed my SPC to 000000, and I changed the carrier name thing to CRKT (should I have done that? It was SPCS before). Then I went and enabled all the GPS settings, and wrote to the phone.
So I thought, now that I have my SPC as 000000, I can get my phone programmed. But of course not; when I dial *228, I always get the "We're sorry" response. I think I missed a step or something. Maybe it was the MDN: When I dialed ##000000, both the MDN and MSID were exactly the same, but I heard that the MDN was supposed to be the phone number. You know, I'm trying to "transfer" my phone number to the new phone. I can't think of anything to do beyond this point. If I dial any other number, by the way, I get some kind of "Welcome to x roaming service" message.
Anyway, I really want to get this thing working before I head off to bed, so fast help would be appreciated. Thanks.
my MDN (phone number) is different from my MSID number. i think Cricket links your phone number to another MSID when you get a new phone, as mine has changed twice!
in QPST, when you set the SPC code to zeros, there is a button to hit to write the code to memory, or save it to flash, or something. i missed that a few times. you enter the one from the log file, then send 000000, then write it. it's not very intuitive. but if you can edit EPST with 000000 then you are fine. i haven't touched anything else in QPST on five phones i have flashed to Cricket
also, you need to point the phone to the right towers with the 1050, or 1013 PRL file, if you haven't. but if it is Cricket on the line with *228 you are good
you don't need to activate the phone, if you don't want to. if the settings in EPST are right you will be OK, as that is all the programming does
I agree with catfishk.
If you can get to ur EPST using all zero's then ur fine. When you call *228 and you do hear the cricket guy then thats good as well.
Try heading over to www.howardforums.com to download a cricket prl. I would recommend 1040 or 1050 and then try to *228 for it to program.
*228 will also program your phone with a new PRL for your market.
I don't know if I could have programmed it manually, but I called Cricket customer support yesterday at 7:15AM and they quickly changed everything for me for $15. Everything went smoothly after that, *228 worked just fine and all that. I don't know if the call and everything wasn't required, but it sure made things easier. My mogul is working now, but I have some now:
I heard that some things, such as MMS, don't work after flashing this phone to Cricket. Are there fixes for whatever is broken?
Also, when I use google maps and I try to look up my GPS location, it shows me as being somewhere only relatively close to where I am and then it says that I should be within 80 meters of that point. I was in a building today trying it out, and it said I was out on the street. Should I just use iGuidance or something?
And finally, is there something special that I need to know for tethering the device? I heard that I can make it act as a WiFI AP, but when I used WMWiFiRouter, it just said it connected to the AP in my house and it didn't show up on my computer's AP list. Is there something else I need to do?
Edit: Oh yeah, also, how much memory should I have free at a time? Currently, I only have 18mb free. I want to have at least Palringo open in the background, and it seems that TouchFlo uses 2mb. I used a program to free up 2mb, so that's really useful, but I didn't imagine so much of the RAM would be used up. I guess that's the way it is.
Also, Opera seems to have some problems. It throws an error when I try to go to a website sometimes, and last time I tried it on EVDO it wouldn't go to any websites when IE would. Anything I should do?
Thanks.
What ROM did you use? The mogul to me really does not have the memory to push T2D or M2D properly with other programs. I would find a clean cricket ROM without the m2d.
Also, to get MMS working you need a program called Arcsoft and manually program the settings for it to work.
As for everything else you just need to research a bit.
I used Ryan Mogul's ROM. Can't I just disable T2D and M2D? I know I disabled T2D, but I dunno where to find M2D to disable it.
Thanks for the MMS info, but the thing is, I don't know what the other things that don't work are. I found out I was stupidly using the Java version of Opera, so I now have the latest WM version and it's amazing. Any answers with the stuff I asked about, such as GPS and tethering?
Momotombo said:
I don't know if I could have programmed it manually, but I called Cricket customer support yesterday at 7:15AM and they quickly changed everything for me for $15. Everything went smoothly after that, *228 worked just fine and all that. I don't know if the call and everything wasn't required, but it sure made things easier. My mogul is working now, but I have some now:
Click to expand...
Click to collapse
that means they never allowed your phone's ESN (Electronic Serial Number) on their network. doh!
Momotombo said:
I heard that some things, such as MMS, don't work after flashing this phone to Cricket. Are there fixes for whatever is broken?
Click to expand...
Click to collapse
malarkey. ALL features work on the Titan with Cricket. i have the same phone you just need to configure it correctly, which is weird with Cricket, but possible...
Momotombo said:
Also, when I use google maps and I try to look up my GPS location, it shows me as being somewhere only relatively close to where I am and then it says that I should be within 80 meters of that point. I was in a building today trying it out, and it said I was out on the street. Should I just use iGuidance or something?
Click to expand...
Click to collapse
it doesn't use true GPS, from what i have heard. it uses AGPS which triangulates from cell towers or something. i dunno but it is never spot on, just approximating
Momotombo said:
And finally, is there something special that I need to know for tethering the device? I heard that I can make it act as a WiFI AP, but when I used WMWiFiRouter, it just said it connected to the AP in my house and it didn't show up on my computer's AP list. Is there something else I need to do?
Click to expand...
Click to collapse
you need to install the right drivers in Windows (i presume that's your computer) and tether it via USB, i think. it pulls data, and acts as a WIFI card from your PC/Laptop, but doesn't act as an AP, i think. i use Linux so i do it differently :/
Momotombo said:
Edit: Oh yeah, also, how much memory should I have free at a time? Currently, I only have 18mb free. I want to have at least Palringo open in the background, and it seems that TouchFlo uses 2mb. I used a program to free up 2mb, so that's really useful, but I didn't imagine so much of the RAM would be used up. I guess that's the way it is.
Click to expand...
Click to collapse
i don't know. use DCD's stuff from his site here. they are light, stable and have a lot of free memory. install the radio ROM, O/S ROM, and Cricket carrier CAB:
http://dcd1182.n715dp.com/index.php
then thank him every chance you get
Momotombo said:
Also, Opera seems to have some problems. It throws an error when I try to go to a website sometimes, and last time I tried it on EVDO it wouldn't go to any websites when IE would. Anything I should do?
Thanks.
Click to expand...
Click to collapse
Opera 9.5 is BETA, and has issues. mine is stable but i use the mobile version, not the Java mini version. also, Cricket is an authentication mess when it comes to EVDO- it works great until you put it down, then it takes a few minutes to get it's s**t together. IE and Opera bail with errors timing out and you just have to keep clicking! it helps to disconnect then reconnect but meh...
Hello,
I am trying to make this tethering work for several days, read lots of posts and still could not find a solution for making tethering work.
In summary it goes like this:
1. first i removed all the previous thethering entries from the db (carrier)and ran the gladenable script (after aroot of course).
2. If i try to add a new apn manually through the settings it deletes it when i finished editing the apn.
3. i edited in build.prop some field to false as someone said it would help (dont remember in which thread was it)
4. any how no matter what i try i still have only one apn which is my provider orange
please can any one help on this?
Should be in Q&A Section
Personally, I just use the Wireless Tether app for tethering via WiFi, and it works very well.
If you want USB tethering, I've used EasyTether in the past (not on the Atrix, but I believe it should work, as it doesn't seem hardware specific).
Never bothered at all with the APN tethering...
Moved to proper forum.
roybens said:
Hello,
I am trying to make this tethering work for several days, read lots of posts and still could not find a solution for making tethering work.
In summary it goes like this:
1. first i removed all the previous thethering entries from the db (carrier)and ran the gladenable script (after aroot of course).
2. If i try to add a new apn manually through the settings it deletes it when i finished editing the apn.
3. i edited in build.prop some field to false as someone said it would help (dont remember in which thread was it)
4. any how no matter what i try i still have only one apn which is my provider orange
please can any one help on this?
Click to expand...
Click to collapse
In your APN settings, under APN type enter: default,tether
Try that out.
Wow thank you very much it worked!!!
That didn't work for me. It is funny, it did work back in 1.2.6 but not in 1.5.7. I even went back to 1.2.6 to double check and worked again.
Are there any of you who are able to tether outside AT&T on an unlocked Atrix running 1.5.7?
mrnicotra said:
That didn't work for me. It is funny, it did work back in 1.2.6 but not in 1.5.7. I even went back to 1.2.6 to double check and worked again.
Are there any of you who are able to tether outside AT&T on an unlocked Atrix running 1.5.7?
Click to expand...
Click to collapse
It has been mentioned in another thread... not sure which one.
For wireless (!) tether, you can try switching on WiFi first, THEN switching on the wireless APN. Some bug in the check script then forces the APN to start immediately. That worked for me at least If it does not work the first time, try again. May result in a couple of force closes the first time you try.
It was mentioned and I did try it. Unfortunately it didn't work.
I just use barnacle. Needs root
roybens said:
Wow thank you very much it worked!!!
Click to expand...
Click to collapse
No problem.
mrnicotra said:
That didn't work for me. It is funny, it did work back in 1.2.6 but not in 1.5.7. I even went back to 1.2.6 to double check and worked again.
Are there any of you who are able to tether outside AT&T on an unlocked Atrix running 1.5.7?
Click to expand...
Click to collapse
I'm doing it. Are you still having issues?
I have AT&T Note, stock ICS, rooted. I have been having problem with inconsistent data connection, even though I have good AT&T signal. For example:
1). Signal is 4-5 bars
2). I CAN make phone call
3). Open browser, Gmail, etc - the "4G" icon shows it's trying to connect, but nothing happened. All the application will timed out.
I tried this in different locations (home, work, airport, etc.) and same problem.
I didn't change the APN or install custom ROM. I am trying to figure out if this is just my phone (bad radio, etc.) or a widespread, known problem for AT&T stock ICS.
Please chime in if you have the same problem.
Did you try powering down.... Then a battery pull..... Battery back in.... Reboot..... Turn off wifi... Make sure data is turned on..
Write back.... Good luck
jimmbomb said:
Did you try powering down.... Then a battery pull..... Battery back in.... Reboot..... Turn off wifi... Make sure data is turned on..
Write back.... Good luck
Click to expand...
Click to collapse
I did try those, specifically:
1). Power down and battery pull out
2). Airplane Mode
3). Disable WiFi and BT - leave only cellular signal
The only thing I have not done is hard reset.. But before doing that (it'll take me a long time to re-configure everything), I want to get feedbacks from other first..
BTW, the ONLY thing I can think off that MAY mess up with the connection is Avast! Anti-Virus. It has a built-in firewall (root required) to prevent select apps from accessing the Internet. However, with WiFi, I have no data connection issue even with Avast! firewall running.
Un install avast and see if that helps.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
LittleRedDot said:
Un install avast and see if that helps.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
I did, same thing... Can make voice call but no data. Even when I rebooted and pulled the battery. About 10 minutes later.. data magically comes back!
Does anyone else have this problem? If yes, please chime in..
I am thinking of doing hard reset. Will this make my Note lose root?
reset the apn , not sure what att uses , but delete whatever is there and re-set the apn
Vintage144 said:
reset the apn , not sure what att uses , but delete whatever is there and re-set the apn
Click to expand...
Click to collapse
I can't reset the default APN...check I can't even edit it. I think AT&T blocked it.
Did you just get the note or did this just start happening? If you just got the phone did you buy it new or used?
lanwarrior said:
I can't reset the default APN...check I can't even edit it. I think AT&T blocked it.
Click to expand...
Click to collapse
you are right.. you cannot edit and change the default ATT APN....
BUT!!!
You can create a new one.... and choose the new one over the default...
you are allowed more than one APN...
Modem .....and APN settings are the most likely causes.
APN settings first of course.....g
Thanks for the suggestions.
The original APN cannot be edited, so I created a new APN and select that. When I press the "back" button and go back to the list of APN, the phone AUTOMATICALLY selected the original APN, not mine.
I selected that again, press back button and waited for 5 minutes (in case the phone trying to update whatever it needs with the new APN). Went back to the list of APN and the original APN was selected again! (???).
So I think something went awry with my phone (I already uninstalled pretty much everything), and just for a test, installed a new ROM (Padawan v7). So far so good, but I haven't done extensive testing (at home, not traveling) yet.
Of You Are on a stock room when you are in the apn's try taping menu and see if you get a reset defaults option
Sent from my SAMSUNG-SGH-I717 using xda premium
make this apn
http://forum.xda-developers.com/showthread.php?t=1684711&highlight=apn
Hello. Im having problems with my Evo. 3g data isnt working. virgin mobile refused to help me because the guy i was talking to is either untrained or an idiot. but anyways i just activated my phone again after it was cancelled. i didnt have it activated for over 5 months or so so it got cancelled and i was provided a new number. before i activated it on virgin mobile again i was thinking of going to metro pcs for their 40 dollar everything plan. but didnt because i was unsure. I did change settings in qpst to match the settings of metro pcs phone settings/data settings and when i changed my mind i tried to flash it back to virgin mobile i messed up a lil and had to do the ##786#, menu, reset thing, to get my virgin mobile original settings back, so now the phone is activated but data is messed up. it dosent load pages or work period. the 3g arrows flash every once in a while but then stop. and i am on meanrom v4.5. just flashed back from jellybean the liquidsmooth rom. i am not quite sure what the problem is but i think the data settings are incorrect. when i go into ##data# settings in data profile it shows ""[email protected] . it seems everything else is mostly correct as far as i know. so if anyone can help me at all with data settings or anything else i would be very appreciated.and yes i tried updating profile/prl stuff and nothing. but thank you for any help at all.
Do a google search for flashing phones to virgin mobile. Does not really matter what phone the flash instructions are for as long as it is an android phone. Then compare the settings to the ones you have on your phone and make any changes needed.
Oh and next time before you change anything with qpst make a backup. With qpst you can read all the info from your phone then back it up tk your pc. Then if you ever need to go back you just open the saved settings and flash them over.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Do a google search for flashing phones to virgin mobile. Does not really matter what phone the flash instructions are for as long as it is an android phone. Then compare the settings to the ones you have on your phone and make any changes needed.
Oh and next time before you change anything with qpst make a backup. With qpst you can read all the info from your phone then back it up tk your pc. Then if you ever need to go back you just open the saved settings and flash them over.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ya I did that and all of the posts I found have outdated information. I called virgin and they told me to wait 24 hours and the problem will be fixed and that my programming information was correct. I'm not sure if they were telling me the truth or not but I had this problem before and switching to profile 1 fixed everything. This time its not working because profile 0 and profile 1 are exactly the same. I don't know what to do at this point. I was hoping someone with an EVO 3d or EVO V 4g working on virgin mobile could connect to qpst and give me pictures of their exact settings minus their account information and esn/meid numbers whited out. Since VM won't help me the only thing I can do now is ask for help from someone else.
seems like my 3g is working now. i flashed back to liquid smooth kit kat. wierd because i have used meanrom before on my account. so i guess it was meanrom messing things up. thanks tho.
Sorry guys, thought we had one of these already.
Just curious about the V_2.3.1? Mostly the reception, but....
Is the Reception any better - mainly for those that have lousy reception to start with.
Are you having any issues?
I haven't heard anything yet so let me know :good:
I have decent reception at my house but I think the beta added a bar to it (from 3 to 4). Definitely better at my son's school. I was only getting 3g there but now get LTE. The big test will be at work but I'm on vacation and don't go back until next week.
I was so amazed that I actually noticed a better internet connection I never looked at my signal bars there is an extra bar or two in my house, which I swear I only had one if that all the time one thing is that I'm not sure if it is the ROM or me but shutdownani is really choppy, every since 2.2 but I try modules sometimes that make my phone unstable like xprivacy& cool tool which I immediately remove but deff noticed improved signals, like I actually see the difference
Updated to 2.3.1 to check apn, I checked apn setting. They didn't change, so I selected reset to default. Then I lost internet and apn kept selecting VM. On reboot phone app fc. Had to revert apn.config and do ##scrtn
jcfunk said:
Updated to 2.3.1 to check apn, I checked apn setting. They didn't change, so I selected reset to default. Then I lost internet and apn kept selecting VM. On reboot phone app fc. Had to revert apn.config and do ##scrtn
Click to expand...
Click to collapse
Did you use the ,DUN METHOD via master shortcut lite, hidden menu #2 4th on list, internet•, launch
Here is a screen shot. If I hit reset it will fill in the new apn added by 2.3.1 then my internet stops, and on restart phone app fc,
jcfunk said:
Here is a screen shot. If I hit reset it will fill in the new apn added by 2.3.1 then my internet stops, and on restart phone app fc,
Click to expand...
Click to collapse
You don't create a new one. You edit the top two. Just tap them and
add ,dun to the APN.
engine95 said:
You don't create a new one. You edit the top two. Just tap them and
add ,dun to the APN.
Click to expand...
Click to collapse
Yes, I already did that edit. 4 me in a specific area the 4G is slower than the 3G. I wanted to try different apns. But those APN would not connect for Sprint at all
What is the intended effect of that file? Sprint has its own APN on a profile update
Works Well for me, definitely see improvement with Switching from 3g to LTE. I also find an LTE signal much quicker. I work in NYC, before the 2.3.1 update I would struggle to get an LTE signal once I left Penn station, now As soon as I walk out it grabs a signal. engine95 you are the Man Bro.
@engine95
I think the apn.config has bad settings for Sprint OTA, I've edited going to test, should be able to activate phone with the edits.
jcfunk said:
Yes, I already did that edit. 4 me in a specific area the 4G is slower than the 3G. I wanted to try different apns. But those APN would not connect for Sprint at all
Click to expand...
Click to collapse
I'm not sure what you were trying to do prior to the above.
If you're talking the apn in the beta, It seems to work better for all of us.
If you're talking about modifying that apn for hotspot, it works also.
jcfunk said:
What is the intended effect of that file? Sprint has its own APN on a profile update
Click to expand...
Click to collapse
See above
jcfunk said:
@engine95
I think the apn.config has bad settings for Sprint OTA, I've edited going to test, should be able to activate phone with the edits.
Click to expand...
Click to collapse
The original, and the beta do the update profile/prl as they should. And "Activate device" is the telltale.
But, you can't use the beta on a fresh install. Meaning on a full ROM. It'll only work as an update.
Remind me again what issue you're trying to fix and I'll see if I can help.
Edit: In V3, it has a new zipalign binary that does what you want.
Did some testing, updating profile/prl works because it uses apn settings from activation, but if you do ##72786# which erases everything then reboots and does an activation using apn.conf.xml to connect to ota. But the setting don't work for ota. Crashes phone app and then only way to fix by wiping and doing clean install.
jcfunk said:
Did some testing, updating profile/prl works because it uses apn settings from activation, but if you do ##72786# which erases everything then reboots and does an activation using apn.conf.xml to connect to ota. But the setting don't work for ota. Crashes phone app and then only way to fix by wiping and doing clean install.
Click to expand...
Click to collapse
That would be right because it has to go through the setup all over again. Just like a clean, full rom install. And it can't find the apn it needs.
Yes, all that file is, is a hack. Not a fix.
Well I'm going to keep working on trying to make the hack safe,
The new native hosts file appears to be blocking random pictures in the play store. Not sure which URL is the culprit but I disabled the file temporarily and the pictures come back. Other than that v3 is running great. Thank you.
I didn't experience any data or APN issues, rom running good, battery real good, only thing I noticed, LEDs aren't working for any app, for me.
Visionikz03 said:
The new native hosts file appears to be blocking random pictures in the play store. Not sure which URL is the culprit but I disabled the file temporarily and the pictures come back. Other than that v3 is running great. Thank you.
Click to expand...
Click to collapse
I've seen that, too. It used to happen with the Mother of all Ad Blockers until that dev removed some entries. Some of the devs apparently host their images on sites that also serve ads.
Here's MoaAB if you're interested: http://forum.xda-developers.com/showthread.php?t=1916098
Visionikz03 said:
The new native hosts file appears to be blocking random pictures in the play store. Not sure which URL is the culprit but I disabled the file temporarily and the pictures come back. Other than that v3 is running great. Thank you.
Click to expand...
Click to collapse
Thanks.
That can happen. If they are too restrictive, then you might have to use the stock Sprint one.
joeyhdownsouth said:
I didn't experience any data or APN issues, rom running good, battery real good, only thing I noticed, LEDs aren't working for any app, for me.
Click to expand...
Click to collapse
Mine are but the timing is about 10 sec between blinks.
I guess check your settings, and maybe wipe cache and dalvic?
I just realized I don't have the native Wi-Fi calling app. Can I ##72786# from v 3.01 and get it to download or is that only on factory ROM?