Hey
I wanted to install this ROM on my Xperia Neo.
I followed the Instructions. After I delete everything with CWM and install the new ROM I restart my phone through CWM.
Now for my problem:
After that all I get is a black screen! But it's not only black and dark, it is lit. So the background light is on. But that's pretty much it. Tried leaving it like that for some time, but it did not change anything. I had it like that for around 30 min.
After some research I found this thread, but that did not help me either.
So I am pretty confused right now and do not know what to do.
I would really appreciate some help. Oh, and I can get into Fastboot mode and Flashmode...
Greetings,
Krytos.
Try flashing stock firmware with flashtool. I don't know if that will help, I'm just saying.
Can you tell me, where to find it?
Kryt0s said:
Can you tell me, where to find it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=19808360&postcount=3
Download and flash it using flashtool
Ok, It's working again! Thanks a lot guys
But I would really like to have the MIUI ROM on my Neo.
Do you guys think, that my problem was a one time thing, or could it happen again?
Greetings,
Krytos.
So I installed the ROM again, and same problem. WTF is wrong with it... Any1 else having problems?
There are a few other MIUI ROMs for Neo, why not to try one of them?
So, I got Cyanmod now. It worked like a charm, right away...
Kryt0s said:
So, I got Cyanmod now. It worked like a charm, right away...
Click to expand...
Click to collapse
If cm7 working, then working MIUI too.
Flash right and all good.
Sent from my MT15i using Tapatalk
How can one flash wrong? I followed the instructions step by step... And I have to correct myself. Cyanmod started. showed me the starting screen and restarted again and from that point on it was stuck in a restart loop...
Kryt0s said:
How can one flash wrong? I followed the instructions step by step... And I have to correct myself. Cyanmod started. showed me the starting screen and restarted again and from that point on it was stuck in a restart loop...
Click to expand...
Click to collapse
You missed something install point...
Full wipe, right kernel and clean rom flash works always.
Sent from my MT15i using Tapatalk
Related
Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Hi Folks,
Hope you are well - wasn't sure if anyone has come across this - but anyone seen the Recovery mode flickering / scrolling when flashed on a locked Galaxy Tab 10.1?
Thanks again!
I'm using CWM 4.0.0.4 on my locked P7510, works as intended.
http://forum.xda-developers.com/showthread.php?t=1171089
Thanks yqed,
For some reason when I have CWM 4.0.0.4, and when I reboot into the recovery mode - CWM shows up - but the screen keeps on flickering / scrolling / refreshing all over the place.
I'm wondering if there is something different in my Retail Galaxy Tab 10.1 WIFI vs. the others - I bought mine from Korea (retail). Appears that I have kernel version 2.6.36.3 instead of .4 and the build is EH14.
Thanks.
I to get some lag while using the cmw...
Sent from my Galaxy Tab!
+1
I have a Korean 32Gb wifi Galaxy Tab 10.1, and my CWM Recovery also starts having a seizure when I boot into it. It still seems to be working fine, but it is nearly impossible to use.
I would really like to know what causes this issue.
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
frankus0512 said:
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
Click to expand...
Click to collapse
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
castiel19 said:
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
Click to expand...
Click to collapse
Are you using the cwm5?
I'M just curious if so and you still get issues.
Sorry I can't really help.
If you can read this it was sent using my GT-P7510.
HOPING solution
frankus0512 said:
Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Click to expand...
Click to collapse
Did you try CMW 5? Preshoot has a tutorial in the development section, its pretty simple just follow it and I think and hope that your issue would be solved!
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Misledz said:
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Click to expand...
Click to collapse
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
---------- Post added at 12:49 PM ---------- Previous post was at 12:40 PM ----------
castiel19 said:
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
Click to expand...
Click to collapse
how can i copy link of youtube here?? i want to show my screen flicker
Just link it here,
HTML:
[media=youtube] bracket [/media]
Where "bracket" is the ID of your video, those letters at the end. EG: FL7yD-0pqZg
Have you tried Overcome's CWM? I'm using that and it's perfectly fine. PS it's the ver 5 release.
PS; For being an epic House fan I shall see to it that you get it worked out
And to top that off, an offlink to the CWM of Overcome http://www.mediafire.com/?6c5tdmds927npdv
PS: Here's your video, Embedded anyways.
I'm on the same page. My screen flicker after entering CWM recovery mode. Very annoying.
In the development section for 10.1 I was just reading in a thread about a Korean ROM, Pershoot stated something about someones device not being compatible with his kernel. I don't know if either one has to do with the other but I think I read in the same thread of someone having "this problem"
Honestly don't know if anything between this thread and that thread are relevant to each other.
Just thought I'd mention it to see if it helps. sorry if it doesn't apply to anything here.
I somehow fixed it by flashing the tab with an non-HK 3.1 stock ROM using Odlin. then then cwm recovery works fine.
Not really a fix but
You could always just find a pre rooted rom to flash with odin, then once u have the pre rooted rom installed get rom manager and u will no longer have to worry about cwm. Plus u could then flash to whatever rom u need to using rom manager.
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Still not working
appreciate your help Misledz, 002001-Overcome_CWM_Recovery_v5.1.2.6 got same result.. my screen still flicker..
I think I will give up on CWM too complicated for me
Can you just give me tips on how to root my tab 10.1 without CWM (if that is possible)
sunnymui said:
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
What Stock Rom did you use? a, planning to download stock rom
P7510ZCLA1 ## 2012 February P7510OZHLA1 China Download
From samfirmware and flash... hope I can use CWM and instal ROM
for the past 3 hours I tried to search pre rooted ROM that can be flash using Odin with no avail
Forgive if there are similar threads about this topic.
I suffered from scrolling cwm so i tried this fix: http://forum.xda-developers.com/showpost.php?p=27830023&postcount=41
It worked excellent but when i lock my screen and unlock it again it starts flickering like shown in this video: http://youtu.be/P6fMxjFdpJE
I have tried to do factory resets both from recovery and flash an original firmware. Nothing works.
Is it possible to get this fixed or am i screwed?
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
I just wanted to say the same. Flash the kernel from pershoot website, it should fix it.
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
isimobile said:
I just wanted to say the same. Flash the kernel from pershoot website, it should fix it.
Click to expand...
Click to collapse
Thank you very much. I will try this when i get home from work.
It doesn´t work for me.
But I dont use 3G anyway so can I just go with P7510 firmware which works?
nicktaken said:
It doesn´t work for me.
But I dont use 3G anyway so can I just go with P7510 firmware which works?
Click to expand...
Click to collapse
Oh... i don't know that... mine is P7500... and works well both CWM and HC3.2 (with 3G and wifi connection)
brusarp said:
Oh... i don't know that... mine is P7500... and works well both CWM and HC3.2 (with 3G and wifi connection)
Click to expand...
Click to collapse
Alright I got it to work! I didn´t get it that I should flash the kernel in cwm so I flashed it in Samsungs recovery
nicktaken said:
Alright I got it to work! I didn´t get it that I should flash the kernel in cwm so I flashed it in Samsungs recovery
Click to expand...
Click to collapse
:highfive: :good:
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
Got the same issue today after installing Task's ROM. The fix worked for me.. Thanks man.. :good:
nicktaken said:
Forgive if there are similar threads about this topic.
I suffered from scrolling cwm so i tried this fix: http://forum.xda-developers.com/showpost.php?p=27830023&postcount=41
It worked excellent but when i lock my screen and unlock it again it starts flickering like shown in this video: http://youtu.be/P6fMxjFdpJE
I have tried to do factory resets both from recovery and flash an original firmware. Nothing works.
Is it possible to get this fixed or am i screwed?
Click to expand...
Click to collapse
When you tried the fix noted above, I assume the screen didn't roll when you rebooted then into CWM recovery. At that point did you flash a ROM and THEN reboot to find the flicker after locking the screen, or did you do a reboot back into the same stock HC after flashing the bootloader and experience the problem?
I'm contemplating flashing this same bootloader because I have a rolling CWM5.5.0.4 right now and I want to stabilize it - but just so that I can root...not thinking about a ROM just yet...
Just to inform you all, i also had to flash a different bootloader after installing cm9 on my p7511, wich is in fact a 7510. For the records, pershoot made the new bootloader for exactly that issue, not backwards. But seems to work also.
What i deal now with, is that after flashing the uk ics for p7510 to my tab, the stock recovery doesn't recognize my sdcard. Can't mount sdcard...
Could be that a repartitioning with pit file will be necessary afterwards for us all.
Edit: thanks to the wise help of msedek, i know by now that my hind was totaly wrong. My mentioned point has to do with the Changes within stock recovery of ics, which have been made to prevent changes from there.
Getting more confident..
OK so it is sounding like this is definitely better. One more question:
I'm following the stickied root guide in General and that method uses CWM 4.0.0.4...I had reflashed that version. If I want to flash this boot loader should I flash 5.5.0.4 first? Or does it matter if I'm just trying to root right now?
EDIT: Flashed the bootloader which straightened out the recovery!! Successfully rooted after that. Downloaded root apps (ROM manager/Titanium/etc). Then turned off my screen - FLICKER CITY!
http://forum.xda-developers.com/showthread.php?t=1680738 <<< THIS fixed it. Load this kernel into the root of your tablet and flash it with CWM. Seems to have done the trick nicely and I'm exploring my newly rooted tab! My wife no longer wants to kill me either.
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
This method don't work with new ICS firmware. I need a new kernel to work with new ICS firmware . I like the new firmware but i stuck with flickerscreen issue. Can sum 1 help ? Thanks.
I have the same Problem here.
Nothing is working for me, i have tried 2 diferent kernels and still flickering screen after tourning the screen off and on.
Please can anyone help me?
KeyF said:
I have the same Problem here.
Nothing is working for me, i have tried 2 diferent kernels and still flickering screen after tourning the screen off and on.
Please can anyone help me?
Click to expand...
Click to collapse
What ROM or firmware are you running? What exactly have you done with the device up to this point? Are you 3G or WiFi? Need more detail...
Flicker screen after screen lock\timeout
djmatt604 said:
What ROM or firmware are you running? What exactly have you done with the device up to this point? Are you 3G or WiFi? Need more detail...
Click to expand...
Click to collapse
I have the same problem on my P7500 3G and the minute i load the bootloader to fix CWM recovery rolling i get the screen flickering after lock screen.
Rom: ICS 4.0.4
Build Number: IMM76D.XXLQ8
BaseBand7500XXlQ8
Kernel: 3.1.10
Still stuck.
Hi guys,
Gtab 10.1 Wifi here. Fix didn't worked, somehow...
After installing official ics from Samsung and rooted, i had the same insane flicker issue. I followed this thread - http://forum.xda-developers.com/showthread.php?t=1680738 - , flashed new kernel, and now i cant pass Samsung Galaxy Tab logo for some reason, not even past half an hour.
Im in a dead end, even tried installing back CM9 but it also wont pass the splashing blue screen.
Any ideas?
cheers!
EDIT : After some reboots, finally managed to boot into ICS (CM9) but now i was pushed back to the step 1, where I don't have a working camera, but I have root access and non official ICS from Cyanogen. I am afraid re-doing all my work and get stuck again in the scrambled screen after it updates the kernel..
I'm I missing something, guys?
Hi there!
Are you still having problems?does this guide here work for you?:
http://forum.xda-developers.com/showthread.php?t=1555984
I've found something,the kernel flash package changes our devices' WiFi driver,that's why it doesn't work.
sorry for not giving a fix until tomorrow,it's sleep time here,I know my excuse will be accepted because you all care for basic human needs...
But please inform me if that guide(Pershoot's) has fixed your problem,thanks for that
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
No it does not work for me.
I have a GT-P7500 with ICS with Build # IMM76D.XWLP6
Please direct me to the correct forum.
thanX
reXbeer said:
No it does not work for me.
I have a GT-P7500 with ICS with Build # IMM76D.XWLP6
Please direct me to the correct forum.
thanX
Click to expand...
Click to collapse
Hey guys i solve my problem today i desided to solve it anyway and now i am free from this **** ....
i just go to http://droidbasement.com/galaxy/roms/cm10/p4/ and download
bootloader.tar.md5
latest recovery.tar.md5
cm-10-20121112-EXPERIMENTAL-p4.zip
but before start anything first i format my tab memory then restart in download mode install bootloader.tar.md5 and recovery.tar.md5 ... volla ... reboot in recovery mode volla thats it all is now working perfect .... then i install cm-10-20121112-EXPERIMENTAL-p4.zip now my tab is free on madness ...
must try but first fully clean your tab ...
iff its really work then click on thanks button ...
I was on my way to root the xperia z2 step by step, everything seemed fine, unlocked bootloader ok,
the problem was whe trying to flash the kernel advkernel Z2_DooMLoRD_AdvStkKernel_FW-402-v0 i rebooted and my screen now is dead, the phone works but my screen simply dead no matter what i do, i can hard reset and get in the recovery mode but thats it.
if i try to get in the main phone the screen dies.... please im desperate help me some one maybe with the stock kernel
fixed
ado0001 said:
I was on my way to root the xperia z2 step by step, everything seemed fine, unlocked bootloader ok,
the problem was whe trying to flash the kernel advkernel Z2_DooMLoRD_AdvStkKernel_FW-402-v0 i rebooted and my screen now is dead, the phone works but my screen simply dead no matter what i do, i can hard reset and get in the recovery mode but thats it.
if i try to get in the main phone the screen dies.... please im desperate help me some one maybe with the stock kernel
Click to expand...
Click to collapse
i fixed it!!! i just flashed the incorrect kernel!! now it works perfect!!
ado0001 said:
i fixed it!!! i just flashed the incorrect kernel!! now it works perfect!!
Click to expand...
Click to collapse
I too am stuck in a blank screen, phone turns on and I can hear screen selections but nothing displays. I can get in to recovery and fastboot using the red reset button. Any ideas, I'm at a loss, followed instructions to the T!
Thanks for any advice or help.
astrah said:
I too am stuck in a blank screen, phone turns on and I can hear screen selections but nothing displays. I can get in to recovery and fastboot using the red reset button. Any ideas, I'm at a loss, followed instructions to the T!
Thanks for any advice or help.
Click to expand...
Click to collapse
Did you flash the correct kernel?
Xernoxis said:
Did you flash the correct kernel?
Click to expand...
Click to collapse
I tried both the DooMKernel v08 then tried the Z2-DooMLoRD_StockFirmwareFiles-FW_402
I couldn't figure out for life of me what I'd done but followed everything to the 'T'. I ended up installing a custom rom HERE and now phone is working, but now I'm not sure if I'm rooted or not!
This is a screen shot of my 'About Phone' page. http://i1200.photobucket.com/albums/bb327/bazzzar/Mobile%20Uploads/Screenshot_2014-06-03-15-01-44.png
astrah said:
I tried both the DooMKernel v08 then tried the Z2-DooMLoRD_StockFirmwareFiles-FW_402
I couldn't figure out for life of me what I'd done but followed everything to the 'T'. I ended up installing a custom rom HERE and now phone is working, but now I'm not sure if I'm rooted or not!
This is a screen shot of my 'About Phone' page. http://i1200.photobucket.com/albums/bb327/bazzzar/Mobile Uploads/Screenshot_2014-06-03-15-01-44.png
Click to expand...
Click to collapse
What firmware version do you have on your phone? .55? .402?
Sent from my D6503
Xernoxis said:
What firmware version do you have on your phone? .55? .402?
Sent from my D6503
Click to expand...
Click to collapse
Before it went t**ts up, I'm pretty sure it was on .55
astrah said:
Before it went t**ts up, I'm pretty sure it was on .55
Click to expand...
Click to collapse
OK what you need to do is either flash a .55 kernel or flash a .402 firmware. The kernel must fit the firmware version.
Sent from my D6503
Xernoxis said:
OK what you need to do is either flash a .55 kernel or flash a .402 firmware. The kernel must fit the firmware version.
Sent from my D6503
Click to expand...
Click to collapse
Got it I think Although the phone does appear to be running ok with the custom rom.
If using the information on the attached screenshot of my About Phone info, would you be able to suggest a kernel or firmware, I can't make sense of the kernel version.
Sorry for being a pain, not as easy as rooting the S3
I followed everything step by step on the cyanogen mod installer wiki and it all worked fine until I went to reboot my phone and I cant get past the HTC quietly brilliant white screen! :crying: :crying: I cant seem to get it to work and the backup I made was deleted somehow on the phone and I'm quite upset because this is the only phone I have and don't understand why it wont boot. :crying: :crying:
bluegreen343 said:
I followed everything step by step on the cyanogen mod installer wiki and it all worked fine until I went to reboot my phone and I cant get past the HTC quietly brilliant white screen! :crying: :crying: I cant seem to get it to work and the backup I made was deleted somehow on the phone and I'm quite upset because this is the only phone I have and don't understand why it wont boot. :crying: :crying:
Click to expand...
Click to collapse
Any Ideas? :crying:
bluegreen343 said:
Any Ideas? :crying:
Click to expand...
Click to collapse
We need some more info here. What were you on before, what recovery are you using, what cyanogenmod file did you flash, what steps did you take before flashing?
danjull said:
We need some more info here. What were you on before, what recovery are you using, what cyanogenmod file did you flash, what steps did you take before flashing?
Click to expand...
Click to collapse
Well I guess it doesn't matter now lol sorry... Took it in and my carrier got me a new phone... An upgrade was due anyways
Hey guys, basically, i'm new-ish to flashing, but i was able to do it following all instructions. Yesterday i installed an s5 theme from this site that caused my phone to have problems such as the wifi not working. I was reading that flashing a custom kernel might help, it didn't.
So i woke up, entered my TWRP custom recovery and stupidly factory wiped everything, now my phone wont get past the 'Samsung galaxy s III' screen, it just stays there. I have no idea what to do, i'm dumb enough not to make a recovery file before i started all this so i've ****ed up there.
If anyone can help me get my phone back i'll be extremely happy, i just want it working again! I have work in a few hours and really hope to fix it before then! Any help is appreciated.
Download a stock rom from sammobile.com and flash it the way you flashed TWRP.
adamldn said:
Hey guys, basically, i'm new-ish to flashing, but i was able to do it following all instructions. Yesterday i installed an s5 theme from this site that caused my phone to have problems such as the wifi not working. I was reading that flashing a custom kernel might help, it didn't.
So i woke up, entered my TWRP custom recovery and stupidly factory wiped everything, now my phone wont get past the 'Samsung galaxy s III' screen, it just stays there. I have no idea what to do, i'm dumb enough not to make a recovery file before i started all this so i've ****ed up there.
If anyone can help me get my phone back i'll be extremely happy, i just want it working again! I have work in a few hours and really hope to fix it before then! Any help is appreciated.
Click to expand...
Click to collapse
It sounds like you might need to flash a ROM before it will boot. Your contacts, texts etc are gone if you wiped /data though.
thefunnyone said:
Download a stock rom from sammobile.com and flash it the way you flashed TWRP.
Click to expand...
Click to collapse
Appreciate the help guys, i thought as much, i just downloaded 'http://forum.xda-developers.com/galaxy-s3/development-i9305/stock-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807/page10' as i was typing this and am installing it now. Lets see what happens?
EDIT- IT WORKED! PHONES BACK!!!
adamldn said:
Appreciate the help guys, i thought as much, i just downloaded 'http://forum.xda-developers.com/galaxy-s3/development-i9305/stock-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807/page10' as i was typing this and am installing it now. Lets see what happens?
Click to expand...
Click to collapse
Wait stop, what kind of s3 do you have?
ArkThompson said:
Wait stop, what kind of s3 do you have?
Click to expand...
Click to collapse
GT-I9305, LTE version.
adamldn said:
GT-I9305, LTE version.
Click to expand...
Click to collapse
Ah ok, it's good that it worked. I was just worried since you posted this on the i9300 forum and said you were flashing an i9305 ROM.