I thought I had rooted my SGP4 earlier using Steves method but when I download superuser it doesn't work and tried a 'root checker' from the marketplace and it said that I wasn't properly rooted. I used his .tar file with odin and when the SGP rebooted it showed the little android in the corner with his name on it but it still wont work.
HELP?
Heres what odin says after its rebooted.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/003> Added!!
it also shows a green box that says PASS!
Not sure if his kernel autoroots - a lot of kernel developers removed that feature because it often caused problems with superuser/su updates - flash ChainsDD's superuser package in CWM.
Google "ChainsDD superuser"
Sent from my GT-P7510 using Tapatalk
Did you root our device first using something like Superoneclick? After you root your device, then you flash with Steve's kernel using Odin.
Alright fixed it, was confused. Thanks for helping.
Sent from my YP-G1 using Tapatalk
Riddick18713 said:
Did you root our device first using something like Superoneclick? After you root your device, then you flash with Steve's kernel using Odin.
Click to expand...
Click to collapse
Rooting is not required to flash anything with Odin - in fact on many devices, rooting is only possible using Odin.
Related
So im trying to root my S3 international version using Odin but, when it starts everything is fine but when it finishes the first stage which is the recovery, it says removed when i havent even touched it.
Also i have USB debug on.
Below is the activity on Odin
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
Somebody help me please
AkhJustin said:
So im trying to root my S3 international version using Odin but, when it starts everything is fine but when it finishes the first stage which is the recovery, it says removed when i havent even touched it.
Also i have USB debug on.
Below is the activity on Odin
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
Somebody help me please
Click to expand...
Click to collapse
hmm normal behavior
After flashing, it will boot to recovery, finish the superuser, cwn etc install, and then it will reboot the phone.
Check if Superuser is not installed
latest cf-root is 6.4 btw ...
NielDK said:
hmm normal behavior
After flashing, it will boot to recovery, finish the superuser, cwn etc install, and then it will reboot the phone.
Check if Superuser is not installed
latest cf-root is 6.4 btw ...
Click to expand...
Click to collapse
sorry im quite new to this, so what do i do exactly after the process ive shown you? When i turn the phone on i gave the cwn superuser access...do i re-do the steps?
Also when it reboots I set superuser permissions and so...but now what?
AkhJustin said:
So im trying to root my S3 international version using Odin but, when it starts everything is fine but when it finishes the first stage which is the recovery, it says removed when i havent even touched it.
Also i have USB debug on.
Below is the activity on Odin
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
Somebody help me please
Click to expand...
Click to collapse
After this the phone will automatically reboot into Cwm recovery and install su binary and root the phone. And then reboot. You just have to sit and watch.
Sent from my GT-I9300
123shree said:
After this the phone will automatically reboot into Cwm recovery and install su binary and root the phone. And then reboot. You just have to sit and watch.
Sent from my GT-I9300
Click to expand...
Click to collapse
Yaaay my phone is rooted, i still think i somehow missed a step but oh well used root checker and it tells me it is rooted...i maybe wouldnt have realised its rooted for a loong time. Thanks guys for the urm...help?
i have new SGS3 and i wanted to flash it to ultimarom but when i finished the initial settings then phone sad that it stopped working and then the phone stop responding so i re-plug the battery and get stuck on boot logo so i tried to go ro recovery but i failed also i had TWRP 2.3 and the initial logo appeared and starts flickering and nothing happened so i tried to reflash it with odin again and nothing happened. Can someone says how should i fix this problem??
Re: [Q] Europe int. SGS3 boot problem
whoa, that's a loong sentence...
when you reflash the stock ROM, what do you mean by "nothing happens"? no messages in the Odin log at all? no way
oh sorry i reflash the twrp with odin not the stock i am still downloading the stock from sammobile. and nothing happened means that nothing has changed from current status and i have noticed a red line in right upper corner
what did the Odin log say?
this whan odin wrote after the twrp reflash
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
EDIT: i am nervous because i dont want to brick my phone
Re: [Q] Europe int. SGS3 boot problem
okay, so just reflash the stock rom
its there a faster way to download the stock rom because the one i downloaded from sammobile is zip file that i dont know waht to do with but when i tried to uzip it it says bad crc corrupted archive so yeah
EDIT: so i extracted it but didn close it and load the tar.md5 file and flash it and it works so what you suggest me to do to flash my rom? do tha same as before or what thanks for your replies
EDIT2: now i have problem with odin
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
read the basics if you don't know how to flash a stock rom.
and there's a thanks button
i eddited the post above yours
EDIT i think i know i accidently instaled kies
Hey everyone
Having read many threads on this issue I would appreciate help for my specific case. I got a defective device from a friend that wouldn't start anymore (introductory Samsung animation was playing repeatedly). I then tried to flash "GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9" to eventually install CM 10.1.3 and then factory reset to make sure the brick bug is not an issue. However, I was not able to flash CWM, because it gets stuck at "NAND Write Start" and eventually fails (see below). Interestingly, I flashed another i9100 flawlessly only a few days ago with the exact same setting. Nonetheless I tried different Odin versions as well as different usb ports and cables.
I have no idea what kind of kernel or android version was running on the device and I can now only get into download mode.
When reading this guide I came across two problems. First, flashing a kernel - some other thread recommended "Siyah-s2-v5.0.1" - was unsuccessful. Second, I wasn't sure if I should try to flash the ICS version mentioned in this thread.
Some mentioned falling back to flashing PIT-files, but because recovery mode is not available, I cannot use the "emmc partition scanner" to identify the correct PIT-file to flash.
I would really like to save this device, so someone else may enjoy using it again in the future. Thanks in advance for any help!
Cheers
sNiXx
ODIN 3.09
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ODIN 1.3
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Could anyone please help me out with this issue? I would appreciate it, if I could get the device running again.
Thanks in advance for help or tips!
Error with the topic
Should be Samsung Galaxy S6, my bad
I have read a lot of information on this forum about how to install a Stock Rom, I'm new on this and I installed a custom rom and everything was working fine until 2 days ago when I ran out of battery and the phone entered a bootloop, I tried to follow a tutorial and end up deleting the OS with the TWRP, bottomline right now I'm using Odin trying to install a Stock Rom but getting an error:
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
I read about flashing the BL before and I extracted the boot.img from the TAR and created a tar.md5 and when trying to use Odin with only the BL I got this:
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
I'm running out of ideas at the moment and would like to request your help
You need to make sure you're using the same version of the firmware or newer.
es0tericcha0s said:
You need to make sure you're using the same version of the firmware or newer.
Click to expand...
Click to collapse
I'm using the latest one avaiable in Sammobile
Just double checking, but you're using the one for the correct model? There's a g900"L" and g900"i"...
es0tericcha0s said:
Just double checking, but you're using the one for the correct model? There's a g900"L" and g900"i"...
Click to expand...
Click to collapse
I'm getting it from,
sammobile.com/firmwares/database/SM-G920I
If you have the serial number, you can try Samsung Smart Switch for PC in Emergency Mode. That might get around these issues you are having...
Some stuff about my device:
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730G/XTC/download/J730GDXU5BRJ1/238833/
I flashed this ROM quite some time ago:
https://forum.xda-developers.com/galaxy-j7-2017/development/cleannouga-romj730f-t3730638
I liked it but I thought about flashing back to stock but Odin (I use 3.12) always fails to write NAND and also freezes my phone to Download Mode whenever I attempt flashing the stock firmware. I searched a lot but nothing seemed to work. I haven't tried the methods used in older versions (e.g. 4.4) so someone might help me link to a working guide or who can help me in this thread.
This is an option that I don't know if it would work. I have a friend with a same but stock device and I plan on flashing TWRP on his phone to backup. Can I transfer that backup file and transfer and restore it on mine? Thanks!
Edit: I dunno if not flashing the latest firmware fails the flash but I'm will try the latest one in case the first one wasn't
Edit2: Okay so I flashed the newly downloaded one but it took too fast (around just 2 seconds) so it probably did not flash everything.
Log:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> sboot.bin.lz4
<ID:0/004> param.bin.lz4
<ID:0/004> cm.bin.lz4
<ID:0/004> boot.img.lz4
<ID:0/004> recovery.img.lz4
<ID:0/004> system.img.lz4
<ID:0/004> userdata.img.lz4
<ID:0/004> modem.bin.lz4
<ID:0/004> cache.img.lz4
<ID:0/004> hidden.img.lz4
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
And it didn't return to normal. Please help. Thanks
akiota said:
Some stuff about my device:
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730G/XTC/download/J730GDXU5BRJ1/238833/
I flashed this ROM quite some time ago:
https://forum.xda-developers.com/galaxy-j7-2017/development/cleannouga-romj730f-t3730638
I liked it but I thought about flashing back to stock but Odin (I use 3.12) always fails to write NAND and also freezes my phone to Download Mode whenever I attempt flashing the stock firmware. I searched a lot but nothing seemed to work. I haven't tried the methods used in older versions (e.g. 4.4) so someone might help me link to a working guide or who can help me in this thread.
This is an option that I don't know if it would work. I have a friend with a same but stock device and I plan on flashing TWRP on his phone to backup. Can I transfer that backup file and transfer and restore it on mine? Thanks!
Edit: I dunno if not flashing the latest firmware fails the flash but I'm will try the latest one in case the first one wasn't
Edit2: Okay so I flashed the newly downloaded one but it took too fast (around just 2 seconds) so it probably did not flash everything.
Log:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> sboot.bin.lz4
<ID:0/004> param.bin.lz4
<ID:0/004> cm.bin.lz4
<ID:0/004> boot.img.lz4
<ID:0/004> recovery.img.lz4
<ID:0/004> system.img.lz4
<ID:0/004> userdata.img.lz4
<ID:0/004> modem.bin.lz4
<ID:0/004> cache.img.lz4
<ID:0/004> hidden.img.lz4
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
And it didn't return to normal. Please help. Thanks
Click to expand...
Click to collapse
Good night
I suggest for You
1. Copy all files to SD
2. Enter stock recovery
3. Factory reset wipe all data
4. Download Odin
5. Install twrp
6. Flash custom ROM 8.1
7. I suggest Maef ROM or E dos
If this ROM runs perfectly
Alternate with custom or stock
Good luck
hacker812c said:
Good night
I suggest for You
1. Copy all files to SD
2. Enter stock recovery
3. Factory reset wipe all data
4. Download Odin
5. Install twrp
6. Flash custom ROM 8.1
7. I suggest Maef ROM or E dos
If this ROM runs perfectly
Alternate with custom or stock
Good luck
Click to expand...
Click to collapse
Thanks so much. I'd like it to be as stock as it can though so as I asked earlier, is it possible to restore a backup from another similar device? If not, then I'll do everything according to what you suggested..
akiota said:
Thanks so much. I'd like it to be as stock as it can though so as I asked earlier, is it possible to restore a backup from another similar device? If not, then I'll do everything according to what you suggested..
Click to expand...
Click to collapse
Maef ROM is stock
Use Helios Kernel is stable and Magnific
thanks for the tutorials, having the same issue
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> Total Binary size: 2801 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)