Hi all!
I need ur help to Root n flash my phone but I tried to search many website with no news so far
Am using SGS2
PDA: I9100TDCKL2
PHONE: I9100TDCKL1
CSC: I9100THLKL1
Thanks
curious0812 said:
Hi all!
I need ur help to Root n flash my phone but I tried to search many website with no news so far
Am using SGS2
PDA: I9100TDCKL2
PHONE: I9100TDCKL1
CSC: I9100THLKL1
Thanks
Click to expand...
Click to collapse
Bro , The Model i9100T can use i9100 roms, but it will change the product code to i9100.
Easiest way to rooting will be using the CF-root Cf-root method ( (you will gain clockworkmod recovery, a way to flash roms/etc from your phone, and nandroid, a whole phone backup system, like snapshots)
Just go through the thread in detail.You will have to match the part of the version number in bold "PDA: 19100TDVKL2"
Phones info:
PDA: The rom/kernel
PHONE: The modem/radio, responsable for signal quality and speed, you dont need to match this to rom version, and the best way to find a good one is to test different ones or check for user exp /comments.
CSC: APN settings and bundles apps, no need to match this, but if you do chose to all you may have todo is enter your APN settings for internet and MMS manually.
You can follow intratech post for flashing any rom flash any rom via odin.See this guide
Related
Hi guys & gals,
I've *just* taken delivery of a new Samsung Galaxy SII running
Android 2.3.3
Baseband I9100XXKDJ
Kernel 2.6.35.7-I9100XXKDJ-CL187606 [email protected]#2
Gingerbread XWKE2 build
I've successfully flashed the kernel of my previous SGS1 to root it using CF-Root via Odin.
I believe I'm looking for a KDJ version of the CF-Root, but can't find one.
Any help / pointers would be much appreciated as unrooted, the phone's just no fun! And I can't use my Titanium backup.
Thank you
Dave
No need to find KDJ or specific. Just find your PDA version and flash that kernel.
I hope you know how to see PDA version,
*#1234#
Regards.
Sent from my GT-I9100
You may want to update to a newer rom, look in this thread, then select a correct version of CF root.
dandabyron said:
Hi guys & gals,
I've *just* taken delivery of a new Samsung Galaxy SII running
Baseband I9100XXKDJ
Dave
Click to expand...
Click to collapse
This thread will give you your kernel
http://forum.xda-developers.com/showthread.php?t=1103399
Hi All,
Sorry for the noob question, I recently got a SGS2, my first Android device. I'm currently on At&t in the US. I believe the phone is unlocked since it has the yellow triangle on boot up.
The phone currently has :
PDA: I9100XWKE7
Phone: I9100XXKE4
CSC: I9100XEUKD1
I would like to upgrade the phone to Andriod 2.3.4 and not wipe any data on the phone. Which PDA, Phone, and CSC firmware should I get?
Thanks for your time.
Reheat said:
Hi All,
Sorry for the noob question, I recently got a SGS2, my first Android device. I'm currently on At&t in the US. I believe the phone is unlocked since it has the yellow triangle on boot up.
The phone currently has :
PDA: I9100XWKE7
Phone: I9100XXKE4
CSC: I9100XEUKD1
I would like to upgrade the phone to Andriod 2.3.4 and not wipe any data on the phone. Which PDA, Phone, and CSC firmware should I get?
Thanks for your time.
Click to expand...
Click to collapse
the yellow trianlge means that the phone is rooted! - in other words a custom software is installed in it.
what ROM?
answer---> what would you like? stock looking? - kitchen KH3, Cognition, vilian etc
custom?--->MIUI, CM7
themed?---->litening
and you can continue like this for long time...go to the original android development mate and check the procedure how to flash and how to use CWM i think u may have one installed if there is the yellow triangle...
then check ROM's and atached screenshots - read about thems bugs and problemss and pick one...dont be afraid u can change back or for another one anytime - but i will recomend you back up EFS folder first - there is a topic how to do so in original android thread.
i hope u will find your way
Thanks for the info Hunteres. I think I want to keep my phone stock, so I was wondering which firmware from Intratech's Official i9100 Firmwares thread I should get that would work on At&t. The phone is rooted and does have CWM installed when I bought it. When I upgrade to 2.3.4, do I need to upgrade the Phone: I9100XXKE4 and CSC: I9100XEUKD1 also?
Firmware
Get the KG5 firmware. I have been using that for a few weeks on ATT USA and its perfect. Battery life is also excellent. I have an unlocked from Clove in the UK.
CC
Any rom can be used on any carrier.
If you are getting poor signal or data speed try a different modem, there is also a thread dedicated to getting the correct AT&T apn.
cc999 said:
Get the KG5 firmware. I have been using that for a few weeks on ATT USA and its perfect. Battery life is also excellent. I have an unlocked from Clove in the UK.
CC
Click to expand...
Click to collapse
is the KG5 more perfect than the KG3?
Sent from my GT-I9100 using xda premium
KG3 - HAS VIDEO for Google Voice - This is the only plus - some apps do not work.
KG5 - much better battery life - all apps work - very solid build, no crashes or freezes.
CC
Thanks for all the info. Would KH3 firmware be better than KG5 since it's newer? Do I need to upgrade my current baseband firmware and CSC firmware when I upgrade to a new kernel?
Ok guys I'm I total noob in this android world and I think it's amazing. So I purchased the SGS2 and have been using for three months now. I wanted more so I started studying about root and custom roms.
I started the procedure but I need your advice/ thumbs up for what I'm gonna do.
Here it is:
When I purchased the phone I upgraded the firmware with Kies to
PDA: I9100UHKH1
PHONE: I9100UHKG4
CSC: I9100COBH1
It's from Movistar Colombia and so far it's the only update we've received from kies.
I wanted to download a copy of this firmware from Intratechs thread but the Fbeye spoiled it, but I got a prevoius version PDA:UHKE5| PHONE:UHKE3| CSC:COBKE2 (just in case)
* So I rooted using CF-ROOT with ODIN file CF-Root-SGS2_XX_OXA_KH1-v4.1-CWM4.tar from Chainfire's thread.
So far so good. I don't mind about the yellow triangle.
*Installed HC-ktool to make a backup of EFS.. done
I'm at this point right now and I plan to make the next steps....I want to upgrade to 2.3.6 maybe use XILA2 (Frankestein firmware).
*Make a backup using CWM
*purchase and download Mobile Odin PRO
*Download PDA: XILA2| Modem/phone: XXKL1| CSC: XEUKH2
*Use mobile Odin to flash XILA2 (it should keep root right)
Is this version compatible?
If something goes wrong can I go back to where I am now using cwm with the backup previously made?
Should I wipe the device? before flashing? after flashing?
I've read somewhere that the battery needed calibration after flashing.. do i have to do this?
Should I worry about the CSC file not being for my country?
When I flash the firmware, will the APN settings change?
If I ever want to return to stock, can I simply flash with odin the original firmware? or with a different method?
thanks in advance...
Hi,
"Another newbie reporting to this forum" ~~~~~~I just changed from Iphone 3GS to Samsung S3, so I'm new to this whole "new" world. I got my S3 from Kogan (HK) and the phone is international version.
I did some search and found out my phone is the European Version as per this link:
http://forum.xda-developers.com/archive/index.php/t-1725348.html
My questions are:
1. Can I flash the firmware to Australian/China Stock ROMs, instead of (correct version from samfirmware.com) - - File: GT-I9300 I9300BUALF1 Android 4.0.4 2012 June I9300VFGALF1 United Kingdom (Vodafone)?
2. What are the difference between the different regions of the stock ROMs?
2. Currently my phone's battery drains so quickly, is there any way to have this fix???? Have already selected advanced Wifi setting - - -Keep wifi on during sleep (Never), but still run out very quickly.
My phone's detail:
AP: I9300BUALF1
CP: I9300BULF1
CSC: I9300VFGALF1
BUILD NUMBER: IMM76D.I9300BUALF1
KERNEL VERSION:
3.0.15-671831-user
[email protected]#1
SMP PREEMPT Tue Jun 5 10:17:57 KST
2012
BASEBAND VERSION: I9300BULF1
Thank you for your help!
superfilm968 said:
Hi,
"
http://forum.xda-developers.com/archive/index.php/t-1725348.html
My questions are:
1. Can I flash the firmware to Australian/China Stock ROMs, instead of (correct version from samfirmware.com) - - File: GT-I9300 I9300BUALF1 Android 4.0.4 2012 June I9300VFGALF1 United Kingdom (Vodafone)?
You can flash any International rom to an I9300 .
2. What are the difference between the different regions of the stock ROMs?
Difference possible modem and CSC relative to location .
2. Currently my phone's battery drains so quickly, is there any way to have this fix???? Have already selected advanced Wifi setting - - -Keep wifi on during sleep (Never), but still run out very quickly.
Better Battery Stats app and thread + ten thousand save your battery posts ,
jje
Click to expand...
Click to collapse
1. Can I flash the firmware to Australian/China Stock ROMs, instead of (correct version from samfirmware.com) - - File: GT-I9300 I9300BUALF1 Android 4.0.4 2012 June I9300VFGALF1 United Kingdom (Vodafone)?
You can flash any International rom to an I9300 .
2. What are the difference between the different regions of the stock ROMs?
Difference possible modem and CSC relative to location .
2. Currently my phone's battery drains so quickly, is there any way to have this fix???? Have already selected advanced Wifi setting - - -Keep wifi on during sleep (Never), but still run out very quickly.
Better Battery Stats app and thread + ten thousand save your battery posts ,
jje
Click to expand...
Click to collapse
Thanks for the reply JJE! can you please clarify the following for me?
1. I've already rooted my stock rom and applied the battery fix, if I need to install the Australian Vodafone stock for example, do I need to use TriangleAway to reset Flash Counter first than re flash the new rom?
2. You mentioned the modem and CSC difference, what are they in relation to the phone and any affects to the phone by flashing the different Region's Stock ROM?
3. My friend is using the Australian version of S3 and doesn't have any problem with his phone. I did some search on the net and found out the battery problem affecting lots of international version of S3 phones. Although after I applied the battery fix via this link - - - http://forum.xda-developers.com/showthread.php?t=1732722 , I'm still having the problem with the battery, therefore is possible for me to flash the Australian Stock ROM and hopefully the different region's ROM will fix this issue.
4. Is there any links that I can follow easy enough for newbie like me to flash the ROM without brick the phone?
superfilm968 said:
Thanks for the reply JJE! can you please clarify the following for me?
1. I've already rooted my stock rom and applied the battery fix, if I need to install the Australian Vodafone stock for example, do I need to use TriangleAway to reset Flash Counter first than re flash the new rom?
After flashing
Warranty = run triangle away then flash stock rom .
2. You mentioned the modem and CSC difference, what are they in relation to the phone and any affects to the phone by flashing the different Region's Stock ROM?
Modem generally work every place but some are better in some locations and you need to try if having network problems .
CSC just local area network setup details instead of manual entry .
3. My friend is using the Australian version of S3 and doesn't have any problem with his phone. I did some search on the net and found out the battery problem affecting lots of international version of S3 phones. Although after I applied the battery fix via this link - - - http://forum.xda-developers.com/showthread.php?t=1732722 , I'm still having the problem with the battery, therefore is possible for me to flash the Australian Stock ROM and hopefully the different region's ROM will fix this issue.
Know nothing about a SGS3 battery issue the fix power profile is not battery its just stats wrongly shown means nothing at all .
4. Is there any links that I can follow easy enough for newbie like me to flash the ROM without brick the phone
Best Guide .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
Click to expand...
Click to collapse
JJEgan said:
superfilm968 said:
Thanks for the reply JJE! can you please clarify the following for me?
1. I've already rooted my stock rom and applied the battery fix, if I need to install the Australian Vodafone stock for example, do I need to use TriangleAway to reset Flash Counter first than re flash the new rom?
After flashing
Warranty = run triangle away then flash stock rom .
2. You mentioned the modem and CSC difference, what are they in relation to the phone and any affects to the phone by flashing the different Region's Stock ROM?
Modem generally work every place but some are better in some locations and you need to try if having network problems .
CSC just local area network setup details instead of manual entry .
3. My friend is using the Australian version of S3 and doesn't have any problem with his phone. I did some search on the net and found out the battery problem affecting lots of international version of S3 phones. Although after I applied the battery fix via this link - - - http://forum.xda-developers.com/showthread.php?t=1732722 , I'm still having the problem with the battery, therefore is possible for me to flash the Australian Stock ROM and hopefully the different region's ROM will fix this issue.
Know nothing about a SGS3 battery issue the fix power profile is not battery its just stats wrongly shown means nothing at all .
4. Is there any links that I can follow easy enough for newbie like me to flash the ROM without brick the phone
Best Guide .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
Click to expand...
Click to collapse
Thanks JJE!!!!
After installed the battery profile, my phone's battery status is back to normal. I tested since this morning with 100% and I still have 60% left, although most of the time left in idle mode, where as when I first got my phone, the battery drop to 80% after 20 minutes after unplug from the power.
I found the file - CF-Root-SGS3-v6.4.zip from this forum, after the installation, how can I tell my phone is rooted or not?
PS: Sorry I'm asking so many questions!
Click to expand...
Click to collapse
superfilm968 said:
JJEgan said:
Thanks JJE!!!!
After installed the battery profile, my phone's battery status is back to normal. I tested since this morning with 100% and I still have 60% left, although most of the time left in idle mode, where as when I first got my phone, the battery drop to 80% after 20 minutes after unplug from the power.
I found the file - CF-Root-SGS3-v6.4.zip from this forum, after the installation, how can I tell my phone is rooted or not?
PS: Sorry I'm asking so many questions!
Click to expand...
Click to collapse
You would need to use an app that requires root privileges .
You can run 6.4 and then it is rooted ,
jje
Click to expand...
Click to collapse
can anyone expaing what the CP is meant for in this example
AP: I9300BUBLG3
CP: I9300BULG2
CSC: I9300VFGBLG3
This is just an example but on mine it has the wrong firmware numbers, how can I cange it?
My build number
Hello everyone, New guy here to this forum but not new to Android. I have had an andriod phone about 3-4 years ago and ended up with an apple product. I have just received the S3 International I-9305 version and wanting to root it because of the power drain and hoping to be able to control this. I have been reading the root section and was about to start but there was one thing it was asking and it was the build number. I have located on my settings on the about tab. I do not see a matching build number for some of the profiles they are asking to match. Can someone point me in the right direction with the info posted below. I would like to root the phone with a samsung based rom. themes will come later, and do I need to have a micro sd card to root? will this keep me from performing the task? My card is in the mail and I cant wait for it to begin rooting the phone. Here are my stats, I have also updated to the latest software and it still says 4.1.2.
Model:
GT-I9305
Version:
4.1.2
Baseband:
I9305XXBME1
Kernal Version:
3.0.31-1153417
[email protected] #1
SMP PREEMPT Wed May 29 17:23:28 KST
2013
Build Number:
JZO54K.I9305XXBME3
Thanks in advance!
how is it relevant to this thread? ask in the i9305 section
Cool, got help else where. I thought it would be relevant to determine the firmware needed to select to perform the root process.
Tapatalk on GSIII
Framaroot should work on all SGS and more but be aware that flashing something like in this case problably a kernel from SGS3 I9300 to a SGS3 I9305 will probably lead to a brick.
Hello guys. Yes i'm a noob and i have tried desperately to find the info out myself but i'm getting myself SO confused, i hope someone can help me out a bit and clarify a few things for me.
I have a SAMSUNG GALAXY ACE GT-S5830i which is a United Kingdom model phone unlocked to all networks but it was getting very worn and tatty so i went out this morning and purchased a brand new SAMSUNG GALAXY ACE GT-S5830i phone (identical model) however this one came supplied as locked to the o2 network and is o2 branded on all the startup/shutdown screens.
I figured i could simply re-flash a stock firmware to it to lose all of the o2 branding and return it to the standard Samsung startup/shutdown screens (and possibly unlock the phone to all networks during the process but i'm not that bothered about doing that as it doesn't really matter to me)
On the handsets I have gone into SETTINGS> ABOUT PHONE> and the details are as follows:
Model Number: GT-S5830i
Android Version: 2.3.6
Baseband Version: S5830iXXLK1
Kernel Version: 2.6.35.7 [email protected] #1
Build number: GINGERBREAD.XXLK3
...and these details are the same for both the old phone and the new o2 branded one.
Now then, here's where i'm at: when i do things i'm not only doing them to get to the 'end goal' but also to learn and educate myself along the way, but so much of the information out there assumes that you already know what they are talking about or is just too confusing as it doesn't explain enough. I have gotten myself very confused lol.
I want to be able to 'de-brand' the new phone so that it is just like the old one, and to do that i'd like to understand what i am doing a bit more, like the baseband version and build number (XXLK1 and XXLK3 are bpth quoted in the 'About Phone' menu) and i don't understand what file i should be downloading as all i can find is labelled as GT-S5830iXXLK3 so would this be the correct firmware for my handsets as i thought they were listed by Baseband (which is XXLK1 not XXLK3 but the bit in the phone's build number says XXLK3 even though the actual phone's Baseband says XXLK1) can you see why i am confused? lol!
I'd like to be as sure as i can be prior to flashing so i don't make any silly mistakes.
I have:
KIES software,
USB Drivers (i think)
ODIN v3.07 software,
Standard Samsung supplied USB cable,
Windows 7 32bit.
Can anyone help me to understand why the firmware sets are in several split files and help confirm which firmware i do actually need for the baseband type of my two handsets.
I'm also intending to make a backup of each phone prior to flashing so i hopefully do not brick any devices. Maybe i could even read the firmware of one phone and flash to the other? Perhaps i'll just stick to finding a suitable stock firmware and keep it simple
Any help, information, education is all appreciated, and i hope as a noob to the forum i haven't breached any set rules with this post (i don't think i have but you never know!)
Kindest regards,
Drew
United Kingdom.
DrewKrew said:
Hello guys. Yes i'm a noob and i have tried desperately to find the info out myself but i'm getting myself SO confused, i hope someone can help me out a bit and clarify a few things for me.
I have a SAMSUNG GALAXY ACE GT-S5830i which is a United Kingdom model phone unlocked to all networks but it was getting very worn and tatty so i went out this morning and purchased a brand new SAMSUNG GALAXY ACE GT-S5830i phone (identical model) however this one came supplied as locked to the o2 network and is o2 branded on all the startup/shutdown screens.
I figured i could simply re-flash a stock firmware to it to lose all of the o2 branding and return it to the standard Samsung startup/shutdown screens (and possibly unlock the phone to all networks during the process but i'm not that bothered about doing that as it doesn't really matter to me)
On the handsets I have gone into SETTINGS> ABOUT PHONE> and the details are as follows:
Model Number: GT-S5830i
Android Version: 2.3.6
Baseband Version: S5830iXXLK1
Kernel Version: 2.6.35.7 [email protected] #1
Build number: GINGERBREAD.XXLK3
...and these details are the same for both the old phone and the new o2 branded one.
Now then, here's where i'm at: when i do things i'm not only doing them to get to the 'end goal' but also to learn and educate myself along the way, but so much of the information out there assumes that you already know what they are talking about or is just too confusing as it doesn't explain enough. I have gotten myself very confused lol.
I want to be able to 'de-brand' the new phone so that it is just like the old one, and to do that i'd like to understand what i am doing a bit more, like the baseband version and build number (XXLK1 and XXLK3 are bpth quoted in the 'About Phone' menu) and i don't understand what file i should be downloading as all i can find is labelled as GT-S5830iXXLK3 so would this be the correct firmware for my handsets as i thought they were listed by Baseband (which is XXLK1 not XXLK3 but the bit in the phone's build number says XXLK3 even though the actual phone's Baseband says XXLK1) can you see why i am confused? lol!
I'd like to be as sure as i can be prior to flashing so i don't make any silly mistakes.
I have:
KIES software,
USB Drivers (i think)
ODIN v3.07 software,
Standard Samsung supplied USB cable,
Windows 7 32bit.
Can anyone help me to understand why the firmware sets are in several split files and help confirm which firmware i do actually need for the baseband type of my two handsets.
I'm also intending to make a backup of each phone prior to flashing so i hopefully do not brick any devices. Maybe i could even read the firmware of one phone and flash to the other? Perhaps i'll just stick to finding a suitable stock firmware and keep it simple
Any help, information, education is all appreciated, and i hope as a noob to the forum i haven't breached any set rules with this post (i don't think i have but you never know!)
Kindest regards,
Drew
United Kingdom.
Click to expand...
Click to collapse
read my thread or signature.
I have loaded KIES and got some more information:
On the older SAMSUNG GALAXY ACE GT-S5830i (unlocked to all networks) it says: PDA:LK3 / PHONE: LK1 / CSC: LK1 (BTU)
On the newer SAMSUNG GALAXY ACE GT-S5830i (locked and branded o2) it says: PDA:LK3 / PHONE: LK1 / CSC: LK1 (O2U)
So clearly i can see the difference here between the new phone with it's o2 network branded firmware, and assume that the only thing i need to change over on the new phone is the CSC part, which ODIN looks like it can do by simply adding a new CSC file in.
Anyway, i went to the SamMobile Firmware site and have downloaded:
GT-S5830i - United Kingdom - BTU
PDA: S5830IXXLK3
CSC: S5830IBTULK1
Version: 2.3.6
Date: 2012-11-23
...which gives me a zip file named: S5830IXXLK3_S5830IBTULK1_BTU.zip
Here's where i just got more confused lol... the thread you pointed me to gets a bit confusing as lots of people are posting allsorts on it, but am i right in thinking once i have that file i just downloaded i go into ODIN v3.07 and just add that file into the PDA section and then untick all the boxes? This seems a bit different to some of the other Odin instructions i have read where they say tick certain boexes and do this, do that etc...
This way seems to be involving reflashing the PDA, and PHONE sections maybe? Am i not just wanting to flash CSC parts? I am SO confused now.
Can anyone help clarify a little more? I can't quite see how you make a firmware backup using ODIN before proceeding to actual flashing. I'd like to make a backup first before i do anything
DrewKrew said:
I have loaded KIES and got some more information:
On the older SAMSUNG GALAXY ACE GT-S5830i (unlocked to all networks) it says: PDA:LK3 / PHONE: LK1 / CSC: LK1 (BTU)
On the newer SAMSUNG GALAXY ACE GT-S5830i (locked and branded o2) it says: PDA:LK3 / PHONE: LK1 / CSC: LK1 (O2U)
So clearly i can see the difference here between the new phone with it's o2 network branded firmware, and assume that the only thing i need to change over on the new phone is the CSC part, which ODIN looks like it can do by simply adding a new CSC file in.
Anyway, i went to the SamMobile Firmware site and have downloaded:
GT-S5830i - United Kingdom - BTU
PDA: S5830IXXLK3
CSC: S5830IBTULK1
Version: 2.3.6
Date: 2012-11-23
...which gives me a zip file named: S5830IXXLK3_S5830IBTULK1_BTU.zip
Here's where i just got more confused lol... the thread you pointed me to gets a bit confusing as lots of people are posting allsorts on it, but am i right in thinking once i have that file i just downloaded i go into ODIN v3.07 and just add that file into the PDA section and then untick all the boxes? This seems a bit different to some of the other Odin instructions i have read where they say tick certain boexes and do this, do that etc...
This way seems to be involving reflashing the PDA, and PHONE sections maybe? Am i not just wanting to flash CSC parts? I am SO confused now.
Can anyone help clarify a little more? I can't quite see how you make a firmware backup using ODIN before proceeding to actual flashing. I'd like to make a backup first before i do anything
Click to expand...
Click to collapse
Seeing that You except you are a noob
Well we all are noobs here
We just try to know more things
Well as your question is not a kind that other noobs post
And you also said that you searched before posting
So it's good for you
I want to tell you that in order to keep the General section clean
I have made a thread for questions
Any questions.
So, this time you are correct and these type of questions are welcomed.
But, next time if you have a question.
Please post in HELP THREAD
Stock..
ahhh horlicks, need to 10 posts to link out side of xda, grrrr.... PM me drew. I have the repack...
i think this is what your looking for, de-branded, (BTU) well branded to samsung anyway, stock firmware.
CSC, Modem and PDA repacked for odin.
CSC_S5830iXXLK3_S5830iBTULK1_S5830iXXLK
MODEM_S5830iXXLK3_S5830iBTULK1_S5830iXXLK1
PDA_S5830iXXLK3_S5830iBTULK1_S5830iXXLK1
Enjoy,
Sat1
hey
satelliteone said:
ahhh horlicks, need to 10 posts to link out side of xda, grrrr.... PM me drew. I have the repack...
i think this is what your looking for, de-branded, (BTU) well branded to samsung anyway, stock firmware.
CSC, Modem and PDA repacked for odin.
CSC_S5830iXXLK3_S5830iBTULK1_S5830iXXLK
MODEM_S5830iXXLK3_S5830iBTULK1_S5830iXXLK1
PDA_S5830iXXLK3_S5830iBTULK1_S5830iXXLK1
Enjoy,
Sat1
Click to expand...
Click to collapse
Hey pls pls pls could you send me link to this stock firmware I've been looking for hours and not found anything, Thanks!
bassjunkie223 said:
Hey pls pls pls could you send me link to this stock firmware I've been looking for hours and not found anything, Thanks!
Click to expand...
Click to collapse
here u go
http://forum.xda-developers.com/showthread.php?t=1971115
hey
js2892 said:
here u go
http://forum.xda-developers.com/showthread.php?t=1971115
Click to expand...
Click to collapse
sorry but which one should i use as theres no link for the UK one
bassjunkie223 said:
sorry but which one should i use as theres no link for the UK one
Click to expand...
Click to collapse
if you want only the UK one, search on sammobile.com, u might find it!
why do you want stock rom?
you could install firmwares of other countries but u "might" face network problems!
backup your imei via galaxy toolbox app if you do so!!
u could flash a custom rom!!