My usb port got coca cola.Can i replace it??????help please...
Yes you can replace it but you need some experience disassembling phones, and the spare USB flex part. Do you still have Warranty?
Sent from my GT-I9100 using xda premium
http://www.ebay.co.uk/itm/Samsung-i...K_Replacement_Parts_Tools&hash=item3f110da480
it is really easy to disassemble. follow this
http://www.youtube.com/watch?v=QKztg1ra4-0
Thanks a lot mariosraptor.I was worried that it's not possible!!!!thank you very much.
you are welcome.
Related
Is it possible for someone to make a guide on how to repair the USB port on our Xperia X10?
I think this guide will be coming in more handy as by looking the issue is apparently quite common...
Thanks in advance
Z3X
i will also be very happy if someone do something like that...and i agree that is a common issue.
Of course mine is also broken.
Me too. Any help?
Shameless bump for newer times
looking for this very baddd
my port is dead and i cant even charge my phone :\
all cus this little none perfect port :\
pls help us some one
http://www.xperiax10.net/2010/05/10/xperia-x10-disassembly-guide/
This is a disasembly guide for x10 just follow it and only 4 solder joints, its easier than it looks, I did it. Tick thanks if this helps. ;+)
Sent from my X10i using XDA Premium App
briandevlin said:
http://www.xperiax10.net/2010/05/10/xperia-x10-disassembly-guide/
This is a disasembly guide for x10 just follow it and only 4 solder joints, its easier than it looks, I did it. Tick thanks if this helps. ;+)
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
Well that guide is rather known to me but as I looked at it there is no mention about soldering. There was a topic here on xda about broken USB with links to other guides about soldering proper points but as I remembered it could only fix charging battery through USB however without any control of charging. Do ya think it is possible to fix USB transfer?
Yes under the metal USB cover at the back of the socket there are 4 small connections, the outside pair are for charging as yours is charging they are ok the middle 2 are data, just flow some solder using a fine tip, its easy, good luck let me know how you get on.
Sent from my X10i using XDA Premium App
Hmm the point is that my USB conenctor is just fine. It's a problem with IC controller on motherboard. That is the most common and problematic issiue. I'm not sure if we are talking about that same situation. Surely most people are mistaking their problems with connection and charging as USB port being broken. But that couse, I think in most cases, isn't true.
Firstly, I loosed data connection and I could only charge battery VIA AC charger but very slowly. Than, after couple days, I couldn't even charge at all. It happen just like that, no mechanical damage, no nothing. Just happend.
No my connections looked fine but on metering from the USB connector to the filtering circuit it was open circuit I flowed solder on the joint I then had continuity reassembled and all worked great, no need to go to the interface circuitary. I am saying if the system cannot read the voltage drop across the shunt resistor it cannot control the current and will not charge
Sent from my X10i using XDA Premium App
briandevlin said:
No my connections looked fine but on metering from the USB connector to the filtering circuit it was open circuit I flowed solder on the joint I then had continuity reassembled and all worked great, no need to go to the interface circuitary. I am saying if the system cannot read the voltage drop across the shunt resistor it cannot control the current and will not charge
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
Could you please upload pictures of your soldering job. I tried to solder mine last night but it didn't work.
Thanks in advance. You will be helping a lot of people
Regards
Z3X
Sent from my X10i TripNMiUI using XDA App
Hi I did not take any photos but ill try tp find some.
Sent from my X10i using XDA Premium App
Have a look at this thread it shows a photo of what needs soldering.
http://forum.xda-developers.com/showthread.php?p=11757334#post11757334
Sent from my X10i using XDA Premium App
I am running through the troubleshooting with Dell now and I am curious how much it costs to replace the charging/data port. Thanks in advance!
Would be awesome if u could replace it with an micro usb
Sent from my T-Mobile G2 using XDA App
Hello guys I need some help and wiil organize the info as best as I can
Origin: started getting a msg saying "voltage to high,charging paused" when the phone wasnt even charging!! after a little drop of water in usb port. Phone would also turn on by itself.
Have done: bought 3 new USB ports buy none worked properly, they fixed the problem with the usb port but then I cant connect to tmobile service, phone does recognize the sim and when I do a network scan it does find at&t but not tmobile. Its like I loose a band.
Flashed a different firmware and baseband. Currently on XWLPT kernel and XXLQ6 baseban and still no luck.
As soon as I change to the old USB board I get instant service with tmobile :s
REPLACEMENT PARTS: USB boards two rev2.2 and one rev2.1
Please advice, I dont understand whats going on :s
THANK YOU SO SO SO MUCH FOR YOUR HELP
What is the small round dome fixing for on the board.A wire goes on it-would it be for the antenna.
Sent from my GT-I9100 using xda premium
theunderling said:
What is the small round dome fixing for on the board.A wire goes on it-would it be for the antenna.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yeah, i guess it is but I hook it up in all of the board equally though. And still no luck with the new ones :s
There has been twice as much people on here saying that after changing board something doesnt work-than people saying it works ok.
People must be selling faulty stuff.
Sent from my GT-I9100 using xda premium
theunderling said:
There has been twice as much people on here saying that after changing board something doesnt work-than people saying it works ok.
People must be selling faulty stuff.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yeah at first I thought that but then I bought 3 and all 3 gave me the same issue, so now I dont know what to think. :s
Only thing you could maybe try is change the usb only.Looks like its just 4 blobs of solder shaped in a square that holds it in.
Sent from my GT-I9100 using xda premium
Hey Handale30, did you ever get it fixed? If so, what worked for you?
I have the same issue but with a GT-N7000, I swapped out the USB charge port board. After the change, I get good signal and the it slowly dies and then it's back again.
I wonder if the good piece that brings the load port my phone is the same as the i9100 as it hurt me and I can not find the original in my country Venezuela.
I get the piece is that of 9100 brings the microphone and charging port hopefully help me with my question
This is the piece I had to buy to replace my broken/non charging usb port. It looks like the i777 and the i9100 are identical, but I make no guarantees
http://www.cellphonerepairshop.com/samsung-i777-charge-port-pcb-board-with-flex-cable/
Sent from my SGH-I777 using xda premium
Why don't you try on eBay
Sent from my SAMSUNG-SGH-I777 using xda premium
hello all,
I'll keep it short and sweet--
The little black seal inside the charger plug, that plugs into the phone is broken..now the plug will not properly close and the phone is no longer waterproof. how do I go about replaced that one seal?
Thanks a lot!
http://i3.sinaimg.cn/IT/cr/2013/0712/3303698089.jpg
(I know that image is NOT of the charger or even of a z ultra..but I am just trying to give reference to the black plug I am talking about)
Thanks a lot!
Hi you got the water seals around the connector, so the phone still water proof. If the cover is broken replace it by a new one
Sent from my X506-3G using xda app-developers app
grosmouton said:
Hi you got the water seals around the connector, so the phone still water proof. If the cover is broken replace it by a new one
Sent from my X506-3G using xda app-developers app
Click to expand...
Click to collapse
Hmm okay..thanks.
Where can I go to buy the connected then? Also, how would I install the connector? It is installed inside the phone...
If the connector is broken you need to open the phone for replacing
Sent from my X506-3G using xda app-developers app
grosmouton said:
If the connector is broken you need to open the phone for replacing
Sent from my X506-3G using xda app-developers app
Click to expand...
Click to collapse
Well, the connector isn't physically broken...just the seal inside the connector. What must I do then?
Also, where would I buy phone pieces for the z ultra?
http://forum.xda-developers.com/showthread.php?t=2556705