hello i have a problem, i have a samsung galaxy tab 10,1 3g/64gb tablet
i rooted it ,and did a nandroid backup ,then i flashed CM9 KANG built for the GT-P7500 (3G) and it worked nice until it suddenly freezed some times
so i desided to go back to orginal rom (nand backup) i did wipe partitions as i should.
but when restored and booted first time it gets in a bootloop where the samsung logo shows.
fine i go back to the cm9 kang that i also did a nandrod backup of
but i get the same results there too a bootloop
does anyone have a solution to this problem?
ps:i do get into cwmod and have the latest version
best regards
kenny
I have the exact same tablet, but I don't experience any freezes o.o How is that you do? Flash the p4 build by Roman, works flawlessly on mine.
You end up in a bootloop only because the kernel is ICS from your previous flash but it should be overwritten via nandroid.
I think you need a stable HC base, Update to 3.2 HC then install CWM again, then finally ICS Kang.
I have no freezes or hangup's
Hello and thanks for the reply but. i did a odin flash insted.
I think that when i flashed CM9 KANG it did something with the partitions
I haven flashed CM9 aokp and it works like a charm
Kenny
Sent from my GT-P7500 using XDA Premium HD app
Kang works fine, but KANG is also AOKP o.o So I'm confused..
Related
Hi forumer,
I just swipe to this ROM but i found my phone shutdown itself (so far 1 times),my video recording cannot zoom and my bluetooth not working (cannot pair with my laptop and headset, my phone cannot discover them and they also cannot discover my phone,already turn on visible on my phone)
Anyone can help?i would like to post at the westcrip's thread,but my point not enough
well the ics is still in beta stage till samsung launches new official firmware ...
i have tryed a lot of ICS roms, but i'm stil on GB because i need a stable phone for daily use.
I had this problem you just need to wipe the caches partition and dalvic. Then fix permissions.
Sent from my GT-I9100
hi guys thanks for replied,
i have done a full wiped to v9.2, it solved everything for me and now my ICS running smooth
it such a great ROM!
realnormalman said:
hi guys thanks for replied,
i have done a full wiped to v9.2, it solved everything for me and now my ICS running smooth
it such a great ROM!
Click to expand...
Click to collapse
It's great to read this, inthe future with this situations follow the advice of chr15j it's good to!
i did a few ICS roms as well but went back to GB, am now on >> PhonandroidRom v1.0- Siyah Kernel -Based MIUI. Pretty stable for me...
this is completely unrelated and i'm an absolute nooblet but I just need a quick answer. I have this rom on my phone but I want to unroot and go back to stock. Am I right in thinking I can just flash a stock samsung gingerbread rom onto the device just using odin and it will unroot it and be fine? Just want to check before I steam ahead and because this is an ICS rom.
Thanks guys.
jakecarberry said:
this is completely unrelated and i'm an absolute nooblet but I just need a quick answer. I have this rom on my phone but I want to unroot and go back to stock. Am I right in thinking I can just flash a stock samsung gingerbread rom onto the device just using odin and it will unroot it and be fine? Just want to check before I steam ahead and because this is an ICS rom.
Thanks guys.
Click to expand...
Click to collapse
Yes, you may need to go back to a suitable kernel also. Using Odin should be very easy.
hello
I tried all the roms remis since 8.5
i find remix 9.4 verry good .the main problem is about chainfire kernel which has to be more developped
for ICS roms, I don't find kernels like Siyah or nymphetamine which are good with GB
now we must wait a new version of XXLPH rom
I tried yesterday Remix 9.5 but too much bugs with CWM and I went back to R 9.4
I tried others roms than Remix (omega,Criskelo,CM9,Foxhound) ,I found Foxhound 0.3 good but still more buggy than R9.4 ( cannot synchronize contacts with outlook)
br46
SGS2 with remix 9.4
Well, not only the chainfire kernel has to be more developed, but also all the custom ones...
i especially miss a perfect working siyah and neak one on ics!
hoping the devs are on it already! ^^
Try :Resurrection Remix ics v1.0, it should be out any moment now.....
Solved! Didn't do full wipe before installing and somehow the kernel for CM10.1 was in the AOKP Omega ROM. Full wipe before flashing has solved this.
I've got a problem with wifi. After coming from stock ICS then OTA stock JB (UK Vodafone some months ago) I rooted and installed SuperNexus. Tried AOKP Omega. These worked well so thought I would try CM 10.1. Wifi stopped working so went back to the Omega ROM via recovery. Wifi still not working. I think I know what to do: reflash a stock Sammy ICS and then a custom ROM. But why would the wifi fail after many ROMS away from stock?
Just to explain more, it won't switch on using the toggle or the slider in settings. Everything else is OK.
Thanks in advance
Sent from my GT-I9300 using xda premium
Ok update again,
Changed the recovery to the cwm4 fixed for cm7
Eh03 rom
Atlas_v2.2 pit
Latest cm7.2/gapps
http://forum.xda-developers.com/sho... could it be my sdcard?
thanks for the help!
Idk much about cm7 but I suggest moving to something newer like cm10.1 (4.2.2) you wont be disappointed its fast, more stable than any GB ROM, and its on the latest version of android
Sent from my SCH-I500 using Tapatalk 2
(Solved) Running CM
Well something worked, I'm running CM. I went and re downloaded the rom and gapps directly to the phone and bam, things went off without a hitch, seems it was a major case of user error .
Hi @ all.
I`m flashing a lot of roms and testing every rom from this page.
But any CM 10 rom doesn`t work.
Everytime i get random reboots. Sometimes i get bootloop, somtimes the phone boots normaly but reboots at installation of GM Account.
Sometimes it runs 1-2 Minutes.
There is no way to fix this problem by myselfe.
Any other rom like GB, cm7 works great.
I make full wipe before flashing. I tested wiping after flashing and so on... NO WAY.
Someone has any Tip for me how to get to run?
THX for you posts. Greetings
(I come from Germany so its a German Atrix i think!?)
Scootsch said:
Hi @ all.
I`m flashing a lot of roms and testing every rom from this page.
But any CM 10 rom doesn`t work.
Everytime i get random reboots. Sometimes i get bootloop, somtimes the phone boots normaly but reboots at installation of GM Account.
Sometimes it runs 1-2 Minutes.
There is no way to fix this problem by myselfe.
Any other rom like GB, cm7 works great.
I make full wipe before flashing. I tested wiping after flashing and so on... NO WAY.
Someone has any Tip for me how to get to run?
THX for you posts. Greetings
(I come from Germany so its a German Atrix i think!?)
Click to expand...
Click to collapse
Which kernel are you using? Are you wiping everything down and installing the right way?
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Which kernel are you using? Are you wiping everything down and installing the right way?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
I think i do all right. I´m useing TeamWin Recovery 2.6 and wipe Dalvik, Cache and Data (Factory reset)
I`ve tested to wipe Dalvik, Cache, Data and System too.
I wanted to flash Mokee Open Souce or Epinters 10.1. They have the 3.1.10 Kernel right now.
In other Roms i take the Faux Kernels (GB or CM7) without any Problems.
Scootsch said:
I think i do all right. I´m useing TeamWin Recovery 2.6 and wipe Dalvik, Cache and Data (Factory reset)
I`ve tested to wipe Dalvik, Cache, Data and System too.
I wanted to flash Mokee Open Souce or Epinters 10.1. They have the 3.1.10 Kernel right now.
In other Roms i take the Faux Kernels (GB or CM7) without any Problems.
Click to expand...
Click to collapse
Wipe system, data, cache, osh, dalvik cache.
You said you wanted to use CM10. CM10 is not the same as CM10.1, which is what you just identified in your last post.
You may need to change the recovery you're using. Some ppl see issues with that.
Sent from my MB860 using xda app-developers app
I have change my recovery and wiped osh too.
And it works for two houres. But my whatsapp can' t verify my number.
so i made a reboot and after that the problem is back again.
(Mokee open source)
Will test epinters 4.2 and report here.
But thanks for your help!!!
Scootsch said:
I have change my recovery and wiped osh too.
And it works for two houres. But my whatsapp can' t verify my number.
so i made a reboot and after that the problem is back again.
(Mokee open source)
Will test epinters 4.2 and report here.
But thanks for your help!!!
Click to expand...
Click to collapse
what rom and kernel were you using?
Sent from my MB860 using xda app-developers app
It is the MK 42.2 RC5 with the 3.1.10 Kernel. May be the kernel isn't the original or tweaked. I don't know.
Scootsch said:
It is the MK 42.2 RC5 with the 3.1.10 Kernel. May be the kernel isn't the original or tweaked. I don't know.
Click to expand...
Click to collapse
its original. Thats not the 1.2GHz kernel. It could be a kernel/rom issue. It does happen. Vine or viber had an issue a bit ago with the kernel/rom configuration. Could be whats happening with you.
Sent from my MB860 using xda app-developers app
**** happens. Life goes on
I will try it again or try another rom.
The tip with the osh wipe helped me very much!
Thx & greetings
don't know why but there is no chance to install any 4.x rom.
Have tested smart light 10.1 and epinters 10.1.
Installation works and the system runs for a wile.
But after some time it reboots and gets bootloop.
Maybe the 3.1.10 kernel isn't compatible with my device!?
I'll test the 4.1.2 from epinter and the cm9 from kystianp.
the CM9 with the 3.1.10 Kernel runs since 5 hours perfekt. No reboots or something else!
The Epinter CM 10 i've tested a little bit works too, but it has old kernel bevore 3.1.10.
Since anything beyond 4.0 is based off epinter's work, they all share the same bugs.. if epinter's rebooting, all of them.will do
Enviado desde mi MB860
i think i'll use GB roms for the next time. They are stable and all i need is working.
Maybe there will come new 4.x Roms that will run on my device like a GB rom.
Thank you all for your posts and have fun by XDA Dev. It's the Best Smartphone Forum ever!
Greetings, SCOOTSCH
Remove SD card and try.
Feche said:
Remove SD card and try.
Click to expand...
Click to collapse
Will test this, thanks
Hi all,
It is my first post.
I used Bionix-V FishmanMod ROM for more than a year.
I wanted to upgrade to CM10.1. So, I flashed CM7.2, made a nandroid backup and flashed CM10.1.
The CM10.1 drains my battery.
I want to test the CM7.2 ROM.
How to downgrade to CM7.2 without Odin to stock? I read (at Defy forum) that need to change file extension to ext3.
Should I do this on Vibrant too?
Can I just restore the CM7.2 backup?
Thanks
try flashing a cm7 kernel before restoring your cm7.2, if that doesnt work you may have to use odin.
Sent from my Icrap Killer using Tapatalk