[HELP]SIM not detected after disabling journaling. - Galaxy Ace S5830 General

Hey guys,
So, I flashed Miracle V2.0 and everything was good . I saw on the thread OP said to increase performance disable journaling, so I did. rebooted my phone and it would say "No SIM card inserted" when it was working just before the flash.I tried reinserting sim and enabling journaling but nothing works. I have restored to a backup I made fortunately(CM9).But even that is not recognising my sim. Please help!

Related

SD Slot not working after ROM upgrade

Hi
I recently upgraded my XDAII to Sin's magic new merged ROM and am really happy with it (thanks Sin!). The only problem is that now my SD slot appears to not work. I have tried to search the forum for an answer but have had no luck.
Symptoms of the problem:
When I insert the card when the phone is on but the backlight has turned off, the backlight comes on again, so it must be recognising the fact that the card has been insterted. But I don't see it either in explorer, or in the Memory control applet.
I have tried a couple of cards, and have even reformatted them using a card reader, but still no joy.
Am I being dumb? Hope someone can help.
Cheers
Donk
Hi, should have mentioned that I am running WM2003SE. Hope someone can help.
Cheers
Donk
sd slot
Have you considered reflashing the Rom again? Maybe the unit went through a flashing error?

help me my sga doesn't read and sd card

good morning mates,
My sga now stopped suddenly to read my sd card.
This is the second time happens it and both of time I installed a program, as sd booster and sd speedincrease, to increase the speed in reading of data on sd card.
The first time the phone restarts to work fine after a night.
Now does't work even if I tried several option:
I formatted my sd; I entered a new sd; I reinstall the rom, but nothing.
I have the stock rom 2.3.6 europe one.
Someone can help me?
thanks

[Q] SD card; works in CWM, not in android

Hi everyone,
I'm terrible sorry if I'm asking a question that's been answered before, but I tried my best searching the forums to find a solution without luck.
I've just flashed my phone to cyanogen first, and then paranoidandroid. The problem i'm having is that i can't get my sd card working.
It works in CWM, and I've tried formatting it there many times; but i only get the "Blank SD card" error, and nothing happens when i format it
in android. I've tried formatting it in windows in FAT32, but i just get the same error msg or "Damaged SD card" error.
I think I got it working in cyanogen by changing the location for where the image were being stored, but i can't find that option in paranoidandroid even though it looks like the exact same camera app.
My phone is i9300t and the sd card i'm using is sandisk 64g.
And responds is welcomed with thanks
Daavidh said:
Hi everyone,
I'm terrible sorry if I'm asking a question that's been answered before, but I tried my best searching the forums to find a solution without luck.
I've just flashed my phone to cyanogen first, and then paranoidandroid. The problem i'm having is that i can't get my sd card working.
It works in CWM, and I've tried formatting it there many times; but i only get the "Blank SD card" error, and nothing happens when i format it
in android. I've tried formatting it in windows in FAT32, but i just get the same error msg or "Damaged SD card" error.
I think I got it working in cyanogen by changing the location for where the image were being stored, but i can't find that option in paranoidandroid even though it looks like the exact same camera app.
My phone is i9300t and the sd card i'm using is sandisk 64g.
And responds is welcomed with thanks
Click to expand...
Click to collapse
Edit; got it working by putting it into another phone and transferring a file on it.

Jiayu S2 Advanced, both SIM cards not detected?

Hi,
Believe me - I tried all the things I found searching the web - this is my last resort..
I have Jiayu S2 Advanced 2/32GB, It stopped detecting SIM cards after system update.
Original Adroid was in version 4.4.2,
After this happened I tried to change ROM with the ones available on needroom portal, as well as Jiayu website and Jiayu.es
Tried to upload ROM with SPflash and CWMRecovery - I went through different 4.4.2 version and 4.2.2 - everytime ROMs were working fine, but SIM cards are not detected.
At the same time I observed that all 4.4.2 Android version did not even notify about SIM cards missing - only 4.2.2 did it.
IMEI address is correct (the same for both SIM cards) - tried to overwrite it anyway with the same numbers - but still the same...
I'm not an expert, but I think radio file is included in ROM package when flashing with SPflash? If not - where can I get it and how to upload it to the phone? Any other ideas?
Attached screenshots from system set up and Mobileuncle Tools - on the SIM 1 I see some signal strength changing and Radio is ON, no matter if card is in or not - status of those doesn't change if I put SIM card in.
ONE MORE THING!! Just found out - when telephone starts up there's standard info 'Slot 1: No SIM card detected, Please check if SIM card is ready' and the same message for SIM2, but when I clear messages and then on working phone I take out SIM card from Slot 1 and put it back 1 second later I get the same message again 'Slot 1: No SIM card detected, Please check if SIM card is ready' - this make me believe that SIM actually is detected, but somehow not recognized! The same thing happens if I "play" with Slot 2. Please help!!
Did you manage to fix it? I am having trouble myself; The SIM cards are detected, but cannot connect to the network. The IMEI was blank after a couple of ROM flashes, but I have restored it. Still, no luck... Probably the efs folder or something like that is corrupted, but I have no backup.
Same issue in Jiayu S2

Sim slot 1 does not detect simcard

Hello friends how are you? I have a problem and that's why I open this thread, I have my cell phone after putting a microsd in slot1 it stopped recognizing any sim card, I thought it was an imei problem. but it was not ago I have already tried with many methods including qcn and nothing that solved the problem, any suggestions? Thank you.

Categories

Resources