Hi guys,
I wanna flash stock Eu 3.2 honeycomb Rom PDA: P7510XXKL2 ## CSC: P7510XEUKL2 to my galaxy tab 10.1 with Pershoot's 2.6.36.4 kernel and no other modification.
Is it possible? If yes point me the way pls.
Thanks.
Fingertyped on Samsung galaxy tab 10.1" 32GB wifi
Yeah, just scroll down the Droid basement page until you get to the last honeycomb kernel pershoot made, and flash with CWM.
Sent from my GT-N7000 using Tapatalk 2
RavenY2K3 said:
Yeah, just scroll down the Droid basement page until you get to the last honeycomb kernel pershoot made, and flash with CWM.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
So flash via odin stock Rom, then flash CWM 5.5.0.4 and last flash this kernel, correct?
Fingertyped on Samsung galaxy tab 10.1" 32GB
You Have Me Here Pal...
Well,first flash the stock rom simply and second flash the kernel via odin flasher in PDA section.
That's all,your done.Enjoy your custom kernel with your stock OS.
Feel Free to press THX...
Nice i ve done it and works ok.
Ty guys.
No problem dude, but if you decide you wanna change, Overcome 2.3.1 is very good, like stock but tweaked. It's not updated any more but that's because there have been no new ROMs from Samsung to make any changes from.
Sent from my GT-N7000 using Tapatalk 2
I ve used infamous, overcome, clean and many others which i forgot atm, but i ve faced lack of wifi reception, in time automatic updates of weather widget stopped working, Bluetooth pairing problems, on reboot no auto connection to wifi spots etc minor issues which i didn't had with stock Rom.
So lets see with stock Rom and modified kernel what ll happen.
Fingertyped on Samsung galaxy tab 10.1" 32GB WiFi
Related
I have rooted my GT 10.1 LTE. After I used StarBurst ROM 9/1/11, my tab is brick, I have to restore.
Do you have StarBurst ROM for GT 10.1 LTE?
Thanks
hellangle said:
I have rooted my GT 10.1 LTE. After I used StarBurst ROM 9/1/11, my tab is brick, I have to restore.
Do you have StarBurst ROM for GT 10.1 LTE?
Thanks
Click to expand...
Click to collapse
Starburst ROM is for wifi tabs only
Sent from my GT-P7510 using xda premium
I did the same exact thing. A temporary solution that I found was to install this kernel from CWM. If you are unable to boot in to CWM recovery like I was then the solution is to flash CWM via Odin so that you can install the kernel zip. Once you install that kernel you will get an exclaimation mark on boot and it will take a little longer than usual to get to the boot splash but it will boot. The only problem is that LTE radio does not work with this rom as it was designed for the wi-fi GT-10.1
I hope this helps.
boatsnhoes said:
I did the same exact thing. A temporary solution that I found was to install this kernel from CWM. If you are unable to boot in to CWM recovery like I was then the solution is to flash CWM via Odin so that you can install the kernel zip. Once you install that kernel you will get an exclaimation mark on boot and it will take a little longer than usual to get to the boot splash but it will boot. The only problem is that LTE radio does not work with this rom as it was designed for the wi-fi GT-10.1
I hope this helps.
Click to expand...
Click to collapse
Thanks boatsnhoes so much, i have done successfully
hellangle said:
I have rooted my GT 10.1 LTE. After I used StarBurst ROM 9/1/11, my tab is brick, I have to restore.
Do you have StarBurst ROM for GT 10.1 LTE?
Thanks
Click to expand...
Click to collapse
you can flash the rom from Team Overcome and follow his instructions for a clean install of stock rom
it will at least get your tablet up and running
is that rom work with Verizon 4G LTE?
I'm waiting you...
I couldn't find any specifik thread with the search option here so forgive me if it was already asked (if it's wrong section also sorry)
I have the Galaxy Tab 10.1 P7500. I just have Stock ROM (Honeycomb 3.2) and I was searching for a kernel that allows you to overclock the Tegra 2. I saw some people talk about the Pershoot kernel which allows you to overclock with SetCPU (I already bought it once for my smartphone so that's not a prob).
But the problem is screen is rolling over and over again.
People had similair problem with Clockworkmod: http://forum.xda-developers.com/showthread.php?t=1555984
Does anyone know how I can fix this? If not maybe other OC kernels I can try? Cause I hope I can use overclock with my tab
Which kernel are you using exactly (post a link)? Because that sounds like you flashed the wrong version. For Honeycomb 3.2 this (select the right one for your model) is the latest pershoot's kernel: http://droidbasement.com/db-blog/?p=2479
I was using the following file: "boot-cm_2636.4_p4_ux_hc32-oc-xtra-vfpv3-d16_fp-010912"
I indeed downloaded that file from the site you give me now.
Have you considered using a custom ROM?
Here's a list of what's available: [All ROM][P7500/P7510]Odin Image and Customs in One Place
I was trying to do it without using a custom rom. But there isn't anyway to use oc kernel without using a custom kernel?
Sent from my GT-P7500 using XDA Premium HD app
Try this one (http://forum.xda-developers.com/showthread.php?t=1680738). I got the same issue and it help wel for me!
I am confused...
saigon66 said:
Try this one (http://forum.xda-developers.com/showthread.php?t=1680738). I got the same issue and it help wel for me!
Click to expand...
Click to collapse
The post you linked is for GT P7510 then suddenly it works for P7500 at the bottom of the page. Should we use the kernel suggested by the original poster?
HC 3.2:
10.1-Wifi, Touchwiz UX (OTA, GT-P7510):
boot-cm_2636.4_ux_hc32-oc-xtra-vfpv3-d16_fp-010912.zip:
I have 3G Galaxy tab P7500. Should I use the kernel above? or should I use the ones that works for me. But then for Vergeten12 he downloaded the 010912 version and did not work. Can anyone help me to choose which kernel works with original Android 3.2?
Btw, I wanted to update my kernel to 2.6.36.4 is because with my current kernel 2.6.36.3 it does not play the HDTV adaptor well (choppy and sound came on and off every 3 seconds). I read from other forum that pershoot 2.6.36.4 kernel can fix this, but I do not want to use CM, just want to use the stock firmware (original firmware?) sorry, I am new to the vocabulary in this forum.
Here is my screen caps for my GT P7500: http://www.flickr.com/photos/[email protected]/7597754228/
Go cm9/gambarou cm9kang/aokp for ics or try dutchdanny custom hc they are all great roms..
Even the jelly bean alpha if you can deal with some issues
Sent from my GT-N7000 using xda premium
Trying to keep the original firmware
msedek said:
Go cm9/gambarou cm9kang/aokp for ics or try dutchdanny custom hc they are all great roms..
Even the jelly bean alpha if you can deal with some issues
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I rather not change my firmware if possible. So, if there is a way to upgrade the kernel without changing to CM9, I prefer that. I just want to use the recently purchased hdtv adapter smoothly with my tab.
Thanks
Look man, i had the same problem and after months of search i figured out that there is some kind of problem when you flash the pershoot kernel you mentioned to our 3g tabs. I had this problem in stock + pershoot and also in overcome + pershoot. But if you let your tab load to unlock screen and pres power buton to sleep screen and then press it again to wake it up the screen stops rolling and all is fine. But you have to do it once every time you power on your tab? Is this helpfull? It works for you?
Sent from my GT-P7500 using XDA Premium HD app
Of you manage to flash a p7510 kernel into your tab 3g will stop working
Erm if you want a stock optimized rom go dutchdanny it'd awesome
Enviado desde mi GT-N7000 usando Tapatalk 2
Pershoot
kwstas268 said:
Look man, i had the same problem and after months of search i figured out that there is some kind of problem when you flash the pershoot kernel you mentioned to our 3g tabs. I had this problem in stock + pershoot and also in overcome + pershoot. But if you let your tab load to unlock screen and pres power buton to sleep screen and then press it again to wake it up the screen stops rolling and all is fine. But you have to do it once every time you power on your tab? Is this helpfull? It works for you?
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
I dunno. I kinda give up on this pershoot kernel stuff. I am just doing firmware upgrade to 2.36.6.4 firmware. And nothing else. The tutorial is not user friendly for pershoot kernel update.
hello
Im a onwer of a galaxy Tab 10.1 GT-P7500/3G, Im in a stock room 3.2 and i would like to make an nandroid backup.
I need to update the Clockwork mode but im reading that many people have reported problems after flashing an update to CWM, anyone can help me on a CWM update?
What is the version of your Clockwork mode flicking problems free?
thanks in advance.
Here you going... Just find the right tar file for your Tab and Odin.
http://droidbasement.com/db-blog/?p=2625
Sent From My Galaxy10. 1 Class Starship...
@ SouthPhilly
Have updated the CWM and do the system backup.
Thanks for the tip.
Cheers
No problem m8... Just glad I could help out.
Sent From My Galaxy10. 1 Class Starship...
felinis said:
hello
Im a onwer of a galaxy Tab 10.1 GT-P7500/3G, Im in a stock room 3.2 and i would like to make an nandroid backup.
I need to update the Clockwork mode but im reading that many people have reported problems after flashing an update to CWM, anyone can help me on a CWM update?
What is the version of your Clockwork mode flicking problems free?
thanks in advance.
Click to expand...
Click to collapse
Well, the latest recovery can be downloaded through rom manager apk. Install it from play open it and follow the instructions. The recovery from droidbasement is not the latest, but it is the only one that works with ics.
Please correct me if I am wrong.
Sent from my amazing 10.1 galaxy tab
Panos_dm said:
... The recovery from droidbasement is not the latest, but it is the only one that works with ics.
Please correct me if I am wrong.
Sent from my amazing 10.1 galaxy tab
Click to expand...
Click to collapse
Hello
im going to desagree with you, just that because my experience was diferent.
I have try the Recovery CloxkworkMod for my equipment, that was the 7500 (Download P4 (Odin; GT-P7500): recovery.tar.md5 ) and like i said earlier in the post, that went smoothly without any problems. That said, im in a stock room, dont know if it works on ICS.
Cheers
I didn't say that it doesn't work. Of course it will backup your device. I just said that it is not the latest. That's different than saying it's not working.
Sent from my amazing 10.1 galaxy tab
Panos_dm said:
I didn't say that it doesn't work. Of course it will backup your device. I just said that it is not the latest. That's different than saying it's not working.
Sent from my amazing 10.1 galaxy tab
Click to expand...
Click to collapse
That wasn't what i mean, sorry if i sounds like that.
cheers
Panos_dm said:
Well, the latest recovery can be downloaded through rom manager apk. Install it from play open it and follow the instructions. The recovery from droidbasement is not the latest, but it is the only one that works with ics.
Please correct me if I am wrong.
Sent from my amazing 10.1 galaxy tab
Click to expand...
Click to collapse
That recovery I linked him to was the last CWM recovery for HC 3.2 roms. Its the last one that preshot did for HC, you can use later ones (the ICS ones) but from my experience their a little glitchy when you pair them with HC roms.
Sent From My Galaxy10. 1 Class Starship...
SouthPhilly said:
That recovery I linked him to was the last CWM recovery for HC 3.2 roms. Its the last one that preshot did for HC, you can use later ones (the ICS ones) but from my experience their a little glitchy when you pair them with HC roms.
Sent From My Galaxy10. 1 Class Starship...
Click to expand...
Click to collapse
how about if i want to flash cm10?.can CWM for ICS do the work?
Welcome. I have a Galaxy Tab 10.1 Wifi 3G. I have a problem with the flashing screen when you install some ROMs and kernels. The screen will flash until the lock and unlock the tablet. When I install software on the original kernel Pershoot the screen flashes. Currently I have installed Overcome and everything is okay. The Infamous ROM, CM9, Android Open Kang Project also experiencing this problem. I have problem only on stock roms and Overcome. I do not know how to solve this problem, I tried many things. Can you help?
Have you tried just Odining back to stock 3.2 and just starting from a clean slate?
Sent From My Galaxy10. 1 Class Starship...
SouthPhilly said:
Have you tried just Odining back to stock 3.2 and just starting from a clean slate?
Sent From My Galaxy10. 1 Class Starship...
Click to expand...
Click to collapse
Www.sammobile.com for the stock firmware
Sent from my GT-P7510 using xda premium
Just a couple of times already istall clean rom Odin, even 3.1 and it does not help. After installing the kernel Pershoot or a custom rom (besides Overcome on it because everything is in order) the screen flashes until it locks and unlocks taba.
Video:
http://www.youtube.com/watch?v=oQPl6SqJNXk
EDIT: I solved my problem:
http://forum.xda-developers.com/showthread.php?t=1555984
Thanks.!!!!!!!!!!!
Hello, Just Picked up my S2 I900m today. I am on the Bell Canada network. My previous phone is the I9000m (still love it) which was Rooted using Slim ICS and the Semaphore kernel using the KG3 Modem.
I've spent a few hours reading/research and for some reason the 9100 seems a little more complicated. I basically want a smiliar setup as I had with the i9000.
I think once I get the recovery figured out, I can start by flashing CM9 and then SLIM ICS.
Any help would be greatly appreciated.
Thanks
Edit: I forgot to mention I bought the phone used so it has been upgraded to 4.03 MUGLD3
well, the great thing with i9100 is that you can basically match anything up (considering of what OS you're in: GB or ICS) unlike that of i9000's, you have to be on that firmware so you can flash that something and etc.
if you have a good background in flashing things in i9000, then you're good to go in the i9100 world
Spacemonkie4207 said:
Hello, Just Picked up my S2 I900m today. I am on the Bell Canada network. My previous phone is the I9000m (still love it) which was Rooted using Slim ICS and the Semaphore kernel using the KG3 Modem.
I've spent a few hours reading/research and for some reason the 9100 seems a little more complicated. I basically want a smiliar setup as I had with the i9000.
I think once I get the recovery figured out, I can start by flashing CM9 and then SLIM ICS.
Any help would be greatly appreciated.
Thanks
Edit: I forgot to mention I bought the phone used so it has been upgraded to 4.03 MUGLD3
Click to expand...
Click to collapse
These links would be usefull
[Bible] Galaxy S II Bible: Complete reference (updated 01/02/12)
New here? READ THIS THREAD FIRST. What Is Recovery & Download Mode?
[03/08 UPDATE] INDEX of KERNELS [Original Android & Android Development]
[03/08 UPDATE] INDEX of ROMS [Original Android Development]
Once u have a recovery u can flash cm9 or which eva custom rom u want
I wish I could Thank you twice.
Sent from my BlackBerry Runtime for Android Apps using Tapatalk 2
Spacemonkie4207 said:
I wish I could Thank you twice.
Sent from my BlackBerry Runtime for Android Apps using Tapatalk 2
Click to expand...
Click to collapse
haha
cheers..!!!
which version of odin should I be using ? I have 1.8 and odin3 3.04
I got the same phone as you. You can flash any i9100 rom and for rooting i suggest you to flash siyah 3.5 tar with odin and get into to cwm and flash any ics rom neatrom is a good one I use the LPG neatrom lite if you wonder with the ics domination theme
Spacemonkie4207 said:
which version of odin should I be using ? I have 1.8 and odin3 3.04
Click to expand...
Click to collapse
here
http://www.mediafire.com/?8e5izu58s0go7wc