I have a strange situation with my Razr XT910, let me explain to you guys and please tell me what to do:
1- My Razr was on 2.3.6
2- I rooted it, but I cannot remember which method as I tried many ways and cannot really remember which one succeeded.
3- After rooting I flashed a 4.0.4 AOKP-GSM-J.Y.Daddy rom
4- I have several issues with the rom so I want to install another rom, so I tried Eternity project rom. It didn't work and gives me message "Installation aborted", so I gave up.
5- Decided to go back to stock rom, so downloaded the right SBF and RSD lite.
6- I put the USB debugging on
7- I turned my phone off and go to boot loader mod by holding Volume +/- and power buttons and go to SBF flash, connect the USB cable and hear the notification sound from my laptop. No message received from the PC saying installing device. Receive message from RSD USB connected and one clicked show device it gives everything N/A
8- Uncompressed the SBF and pressed start. Then process FAIL
9- Now, tried to turn the phone on, I have to go to to Fastboot mode and press power long then screen goes off. Then I press volume +/- with power again to go to bootloader mode then choose normal reboot to turn my phone back.
10- Tried the above steps over than 30 times for 2 days. Suddenly I discovered that my phone is unrooted when I tried to install any app requires rooting such as Titanium.
My ICS works fine with some bugs, I still wants to go back.
Can any one help me, I explained everything I'm going through.
Appreciated.
flupo2000 said:
I have a strange situation with my Razr XT910, let me explain to you guys and please tell me what to do:
1- My Razr was on 2.3.6
2- I rooted it, but I cannot remember which method as I tried many ways and cannot really remember which one succeeded.
3- After rooting I flashed a 4.0.4 AOKP-GSM-J.Y.Daddy rom
4- I have several issues with the rom so I want to install another rom, so I tried Eternity project rom. It didn't work and gives me message "Installation aborted", so I gave up.
5- Decided to go back to stock rom, so downloaded the right SBF and RSD lite.
6- I put the USB debugging on
7- I turned my phone off and go to boot loader mod by holding Volume +/- and power buttons and go to SBF flash, connect the USB cable and hear the notification sound from my laptop. No message received from the PC saying installing device. Receive message from RSD USB connected and one clicked show device it gives everything N/A
8- Uncompressed the SBF and pressed start. Then process FAIL
9- Now, tried to turn the phone on, I have to go to to Fastboot mode and press power long then screen goes off. Then I press volume +/- with power again to go to bootloader mode then choose normal reboot to turn my phone back.
10- Tried the above steps over than 30 times for 2 days. Suddenly I discovered that my phone is unrooted when I tried to install any app requires rooting such as Titanium.
My ICS works fine with some bugs, I still wants to go back.
Can any one help me, I explained everything I'm going through.
Appreciated.
Click to expand...
Click to collapse
Unplug razr from pc
Uninstall all razr software
Reinstall motocast 1.29
Plug razr, let drivers reinstall
Turn it of
Go into fastboot menu
Wait drivers reinstall
Flash .sbf
Cheers
Sent from my XT910 using Tapatalk 2
Thanks dear, that's exactly what I did 30 times and I keep getting same message on RSD "FAIL"
Now I tried this http://forum.xda-developers.com/showthread.php?t=1486718
and choose # 1 restore EU GSM and I was stuck in a boot loading loop.
Any time I try an option with my phone I go to this screen:
AP Fastboot Flash Mode (s) (Flash Failure)
OA.GC
To return to normal mode-first press power key to power down
Device is LOCKED. Status Code:0
Battery OK
OK to Program
Connect USB
Data Cable
flupo2000 said:
Thanks dear, that's exactly what I did 30 times and I keep getting same message on RSD "FAIL"
Now I tried this http://forum.xda-developers.com/showthread.php?t=1486718
and choose # 1 restore EU GSM and I was stuck in a boot loading loop.
Any time I try an option with my phone I go to this screen:
AP Fastboot Flash Mode (s) (Flash Failure)
OA.GC
To return to normal mode-first press power key to power down
Device is LOCKED. Status Code:0
Battery OK
OK to Program
Connect USB
Data Cable
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=1453660
Sent from my XT910 using Tapatalk 2
pedrotorresfilho said:
Try this
http://forum.xda-developers.com/showthread.php?t=1453660
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Thanks again,
I forced it to close then it was booted to a screen (not CWmod) which enabled me to wipe the data and restore factory sittings and it worked. Now the phone like brand new and I installed the update to 2.3.6
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
ergotelis said:
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
Click to expand...
Click to collapse
You'll probably need to flash a new recovery partition. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1950307
RaiderDuck said:
You'll probably need to flash a new recovery partition. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1950307
Click to expand...
Click to collapse
Thanks, but the problem is that this guy can get into the recovery with powering up+holding volume down button, if i understood well.but I can't!
ergotelis said:
Thanks, but the problem is that this guy can get into the recovery with powering up+holding volume down button, if i understood well.but I can't!
Click to expand...
Click to collapse
flasing a recovery is done via fastboot so you don't have to enter recovery but fastboot (hold power and volume down till it shows fastboot, then press up) .
look at this post: http://forum.xda-developers.com/showpost.php?p=33137046&postcount=10
Fix
ergotelis said:
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
Click to expand...
Click to collapse
hello i had this problem yesterday, it happens in neutrino rom to alot of people!
and btw i could not open recovery either
ill explain what i had to do
i had to use moto-fastboot and install a new recovery, basically your recovery is dead and your rom is unbootable
heres the steps
download the moto drivers and install
http://forum.xda-developers.com/attachment.php?attachmentid=1381183&d=1349549067
then download the motofastboot zip http://forum.xda-developers.com/attachment.php?attachmentid=1381414&d=1349555102
and create a new folder in C: (computer) called Android and then drag the files from the moto zip into android
Then download a new recovery http://www.mediafire.com/?6ww8wrjrdqq9m97
place the recovery.img into the android folder
now you have all the files needed to reflash your new recovery and fix your phone the whole idea is to reinstall recovery so you can access it and wipe and install the rom fresh again
now you need to do these steps
1) Attach your phone to the PC via USB (use a port closest to the power supply)
2) Reboot phone while holding volume down until you see "fastboot"
3) Press volume up to initiate fastboot
4) On your PC click the Start menu, then in the search box type "cmd"
5) In the command prompt type the following commands (no quotes, hit enter after each command)
6a) "cd c:/android"
6b) "moto-fastboot devices"
your CMD promt should show something like this
C:\Users\Me>cd c:/android
c:\Android>fastboot devices
TA20703SX9 fastboot
c:\Android>
now if that has all worked type the following phrases
moto-fastboot erase recovery
moto-fastboot flash recovery recovery-clockwork-6.0.1.4-maguro.img
moto-fastboot reboot
now the phone should reboot, unplug the usb and pull battery out.
put battery back in and then try to boot into recovery like you normally would (power button + Vol Down)
and your new recovery should load!
from here you can wipe your whole system which i would reccomended as your current one is corrupt and install a new rom or reflash your current on onto a clean wipe. if you dont understand how to clean wipe do all of these steps, factory reset, clear cache, clean dalvik cache then go to mounts > storage and format data + format cache + format system
now install new rom and let it boot up, should bootloop a couple of times then start! if not unplug battery from phone and ask for further assitance
Pixelguy said:
1) Attach your phone to the PC via USB (use a port closest to the power supply)
2) Reboot phone while holding volume down until you see "fastboot"
3) Press volume up to initiate fastboot
Click to expand...
Click to collapse
Thank you for your help, the problem is exactly here, i put on the usb, i power up the phone by pressing the volume down, and the phone does nothing,doesn't show the fastboot,and after 10-15 secs starts rebooting again. This is my problem!
The only response from my phone is when powering up, and pressing the volume up, it says "starting rsd protocol support"
Is there any case that my volume down is dead?
ergotelis said:
Thank you for your help, the problem is exactly here, i put on the usb, i power up the phone by pressing the volume down, and the phone does nothing,doesn't show the fastboot,and after 10-15 secs starts rebooting again. This is my problem!
The only response from my phone is when powering up, and pressing the volume up, it says "starting rsd protocol support"
Is there any case that my volume down is dead?
Click to expand...
Click to collapse
unplug usb
remove battery, then put battery back in make sure phone off (no green light)
then hold power button and vol down at the same time for a few seconds
Fastboot should appear in white writing then press up volume and it should say starting rsd protocal or something similiar
then plug in usb and follow the steps i have written above
i do exactly what you said, but doesn't show fastboot. from switched off, if i press volume up with power button, i see the message "starting rsd protocol support" .but no fastboot option!
Is there any chance that you can access adb after bootscreen? than you can use "adb reboot recovery" to get there...
jorno88 said:
Is there any chance that you can access adb after bootscreen? than you can use "adb reboot recovery" to get there...
Click to expand...
Click to collapse
When i start up phone, the only combination possible to stop restarting is by pressing power+vol up to show that with RSD. There is no other option then selectable. Power + volume down does not work, doesn't show anything, has anyone of you experienced this thing?
If the only working option you have is RSD, then I'm afraid you're stuck with having to flash a stock SBF. I hope you know/remember exactly what stock version you had installed before any modding or flashing, because the SBF has to match exactly. Choose wisely and read up as much as you can before flashing.
I have over a year now with custom roms, and i can't remember which version i had. Why do i have to find exactly the version that i had? The latest stock version won't work with rsd? It will make it hard brick?If i manage at least to recover the fastboot menus etc it would be great!
I will later also try to open it, to see if the side button "volume down" is not working,.
I have another question, in your moto atrix, if you press on startup power+vol up, are you also seeing the "starting RSD" etc option??
ergotelis said:
I have over a year now with custom roms, and i can't remember which version i had. Why do i have to find exactly the version that i had? The latest stock version won't work with rsd? It will make it hard brick?If i manage at least to recover the fastboot menus etc it would be great!
Click to expand...
Click to collapse
Yes, flashing a wrong SBF will most likely hardbrick your device.
ergotelis said:
I have another question, in your moto atrix, if you press on startup power+vol up, are you also seeing the "starting RSD" etc option??
Click to expand...
Click to collapse
Can't try right now, but as far as I know, yes, that is a standard way to enter RSD mode.
thank you, so, i know that at least my phone responds to some instructions.
Is there anyone else to suggest me to do anything else?
IN rsd mode, (other than flashing a stock random rom with chance of hardbricking,)the phone can be read by usb, can i do anything there?
ergotelis said:
IN rsd mode, (other than flashing a stock random rom with chance of hardbricking,)the phone can be read by usb, can i do anything there?
Click to expand...
Click to collapse
Sadly no. The RSD mode can only ever be used to flash SBFs. That's it. Nothing less, nothing more.
I will now try to open it to see if vol down is not working well. If it does work, i will select a stock rom 1 year old and i will flash it using rsd, and whatever happens....:good:
I disassembled the phone, the button seems to operate fine(?).
I flashed with RSDlite the 2.3.6 version, the RSD stuck to waiting for phone to restart.
The phone restarted, the "unlocked" logo disappeared.
Starts normally, passes the red motorola logo, shows the graphic of AT&T, and after ~10sec starts restarting again. Bootloop again!
At boot, pressing power+vol up, i can still get the RSD support. Pressing power+vol down does nothing, I don't see any error messages, like the ones in hard brick.
What can i do now, any ideas please!!!
try this
ergotelis said:
I disassembled the phone, the button seems to operate fine(?).
I flashed with RSDlite the 2.3.6 version, the RSD stuck to waiting for phone to restart.
The phone restarted, the "unlocked" logo disappeared.
Starts normally, passes the red motorola logo, shows the graphic of AT&T, and after ~10sec starts restarting again. Bootloop again!
At boot, pressing power+vol up, i can still get the RSD support. Pressing power+vol down does nothing, I don't see any error messages, like the ones in hard brick.
What can i do now, any ideas please!!!
Click to expand...
Click to collapse
Yesterday I had a hard time getting my phone into fastboot mode, after loading a bad SV kernel,it only wanted to start the RSD protocol mode. I eventually got into fastboot by plugging into the wall charger, then removing and installing the battery while holding the vol button. When fastboot appears, unplug the charger to allow sd access.
Thanks for the suggestion, i tried even this,it didn't work. The funny thing is that it shows the battery charging level full screen if i connect the charger, as it starts.
I noticed also that when i press vol down now, it takes longer to start and continue to the moving red logo, it stays for a while stable red,feels like it is thinking whether to start or not lol (if i don't press vol down, on the power up the red moto logo immediately starts the classic "waving" effects)
Anyone having any kind of suggestion?I guess you don't, right?
Hi guys
My XT910 was submerged in a river a couple of weeks ago. It did not short circuit, but I think it got soft bricked.
Whenever it boots, it will display AP Fastboot Flash Mode (S).
I can boot to Boot Mode Selection Menu with Power + Vol+ + Vol-, but I cannot scroll or select anything. I usually enter the page so that I can access BMM to Power Off the device or access the internal storage.
I tried to Fastboot an Asia ROM but the process got stuck at Step 2. I had no choice but to unplug USB. From then on, my laptop could never detect my phone again. I am using the latest Motorola Drivers and cable.
Today, I tried what was suggested here:
http://forum.xda-developers.com/showthread.php?t=1738769
but because my phone could not be detected by my laptop, I transferred the Boot_new.img to MicroSD and used BMM to flash new kernel. (I wasn’t sure what I was doing.)
Now, when I boot my phone, AP Fastboot Flash Mode (S), and what I get after Boot Mode Selection Menu is a brief Motorola logo and Invalid Flash Mode (S) (Boot Failure).
As of last check (half hour ago), battery health was at 96%. I cannot power down the device without BMM, or at least I don’t know how to. Can anyone assist me on restoring my phone to a functional state again?
Edit: prior to all this, my phone was on Euro OTA Jelly Bean
Tom9 said:
Hi guys
My XT910 was submerged in a river a couple of weeks ago. It did not short circuit, but I think it got soft bricked.
Whenever it boots, it will display AP Fastboot Flash Mode (S).
I can boot to Boot Mode Selection Menu with Power + Vol+ + Vol-, but I cannot scroll or select anything. I usually enter the page so that I can access BMM to Power Off the device or access the internal storage.
I tried to Fastboot an Asia ROM but the process got stuck at Step 2. I had no choice but to unplug USB. From then on, my laptop could never detect my phone again. I am using the latest Motorola Drivers and cable.
Today, I tried what was suggested here:
http://forum.xda-developers.com/showthread.php?t=1738769
but because my phone could not be detected by my laptop, I transferred the Boot_new.img to MicroSD and used BMM to flash new kernel. (I wasn’t sure what I was doing.)
Now, when I boot my phone, AP Fastboot Flash Mode (S), and what I get after Boot Mode Selection Menu is a brief Motorola logo and Invalid Flash Mode (S) (Boot Failure).
As of last check (half hour ago), battery health was at 96%. I cannot power down the device without BMM, or at least I don’t know how to. Can anyone assist me on restoring my phone to a functional state again?
Edit: prior to all this, my phone was on Euro OTA Jelly Bean
Click to expand...
Click to collapse
Theres no way back to ICS after updating to euro jelly bean, read the first post carefully, it warned you about it
You can use this tutorial how to unbrick it
http://forum.xda-developers.com/showthread.php?t=2194825
Sent from my GT-I9300 using xda app-developers app
Hi Guys,
I really need your help.
After tried upgarde to LIQUIDSMOOTH JB, i found that my baseband doesn't work in my country (i'm in Indonesia).
I tried to updated my baseband with BMM but not work.
So i decide to do fastboot from ICS then upgrade to Liquidsmooth in proper way.
What I did:
- backup CID
- erase CID
- get ICS fastboot file asia retail
- ap fastboot with rsd
- after reboot manual and go to BP Tool
- my phone entering the system but then it back to screen moto again
- since i used verizon phone, i tried to fasboot with EU fastboot ICS file
- ap fastboot with rsd
- manual reboot and go to bp tool
- screen shows, updating system, starting system but then it throw me back to screen moto again
now my battery is low, and i'm waiting for desktop charger
what i need to do to get my phone back?
after rsd done flash my phone, i got message in status "Please manually power up this phone"
what i did then:
- unplug phone from usb cable,
- reboot phone (volume up + down, power, after led flashing, i release all buttons)
- then i press again volume up + down, power , after led flashing, i keep pushing volume up + down untill ap fastboot menus appears
- i plug again usb and waiting until result in rsd shows PASS
Am i did the right steps?
Thank you in advance for your suggestions
same problem with me
idwijayaku said:
Hi Guys,
I really need your help.
After tried upgarde to LIQUIDSMOOTH JB, i found that my baseband doesn't work in my country (i'm in Indonesia).
I tried to updated my baseband with BMM but not work.
So i decide to do fastboot from ICS then upgrade to Liquidsmooth in proper way.
What I did:
- backup CID
- erase CID
- get ICS fastboot file asia retail
- ap fastboot with rsd
- after reboot manual and go to BP Tool
- my phone entering the system but then it back to screen moto again
- since i used verizon phone, i tried to fasboot with EU fastboot ICS file
- ap fastboot with rsd
- manual reboot and go to bp tool
- screen shows, updating system, starting system but then it throw me back to screen moto again
now my battery is low, and i'm waiting for desktop charger
what i need to do to get my phone back?
after rsd done flash my phone, i got message in status "Please manually power up this phone"
what i did then:
- unplug phone from usb cable,
- reboot phone (volume up + down, power, after led flashing, i release all buttons)
- then i press again volume up + down, power , after led flashing, i keep pushing volume up + down untill ap fastboot menus appears
- i plug again usb and waiting until result in rsd shows PASS
Am i did the right steps?
Thank you in advance for your suggestions
Click to expand...
Click to collapse
same problem with me :crying:
have you find the solution ?
(uda ktmu solusinya bos ? klo uda mohon share ya...)
What is your battery status????
Sent from my LT28h using xda premium
alwaysdksh said:
What is your battery status????
Sent from my LT28h using xda premium
Click to expand...
Click to collapse
During flashing i charge until more than 90%
Now I can only go to BP HW Diag, but cannot go to system with BP Tools
What should I do?
alihabibie said:
same problem with me :crying:
have you find the solution ?
(uda ktmu solusinya bos ? klo uda mohon share ya...)
Click to expand...
Click to collapse
(hehehe pasti dikabarin kalo udah solve bos)
Hey guys,
My friend asked me to help him out with his Motorola Razr XT910 phone. He tried to root it and flash a new rom but something went wrong because the phone is half(?)-dead now.
It just shows the Motorola logo when I start it and a few seconds later it shuts down. The strange thing is that it turns itself on automatically a few minutes later so I can't turn it off at all. Also, I can't start it with fastboot mode either (volume up+down+power).
When I try to connect it to my PC it's appearing as an unrecognised device so I'm clueless now. Most likely he killed/flashed/erased the bootloader somehow (he tried to flash something in fastboot mode).
Is there anything that I could try?
Does the phone still have battery? Because if it doesn't then you would need to get a factory cable.
Here's how to get into fastboot mode :
(1) When you see the Motorola logo, press the volume down button + power button and wait for the phone to turn off (there will be a slight white flash line on the screen)
(2) As soon as it does, press the volume up+volume down+power button and you should get it. It isn't easy, will take a few tries.
However, if it's battery is drained, just get the factory cable. It automatically puts the phone in fastboot mode
Plug it up to charge for at least 10 minutes then do power and down arrow for 20 seconds then release both and do power and up arrow till you see fastboot. Let me know how you make out.
Thank you guys, I was able to get into fastboot and the phone is working again (after debricking and flashing back the old JB rom).
Another question: I was able to root the phone with the chinese rootmaster application (From this thread: http://forum.xda-developers.com/showthread.php?t=2402943 ) Is it possible to downgrade it to ICS? The phone's owner wants a hungarian ROM and the current JB rom is not containing this language. I found a central european ICS and most likely it's the latest hungarian ROM but I don't know how to flash or install it properly. Can you help me out with this? Is it possible if the phone is rooted?
szepesif said:
Thank you guys, I was able to get into fastboot and the phone is working again (after debricking and flashing back the old JB rom).
Another question: I was able to root the phone with the chinese rootmaster application (From this thread: http://forum.xda-developers.com/showthread.php?t=2402943 ) Is it possible to downgrade it to ICS? The phone's owner wants a hungarian ROM and the current JB rom is not containing this language. I found a central european ICS and most likely it's the latest hungarian ROM but I don't know how to flash or install it properly. Can you help me out with this? Is it possible if the phone is rooted?
Click to expand...
Click to collapse
You can't downgrade,it isn't possible.
Try to flash another JB rom,some of them must have hungarian language.
Sent from my Razr XT910