hello. i have been flashed android. and yesterday my sense of screen started to not work. now i wanna back to original rom and go to warranty, and i tried to flash leoimg.nbh from sd card, but i have error "software update failed" "00028002" "upgrade rom code error please try again" and etc. my spl 3.03.0000 . please help. and sorry for my bad english
and when im trying to install rom by usb it loads 1% and then phone went black and installation stops. please help me some 1
Get hspl4
Get unbranded wwe 3.14 rom
Into bootloader
Connect USB
Run hspl4 - choose 3.03.hspl
Reboot into bootloader
USB
Run the 3.14 install over USB
Reboot into bootloader
USB
Hspl4 - choose 3.03.0000
Done.
Or.......
Use the correct rom (using the wrong rom is why you're having problems)
Related
Hi people,
I got a problem with my hd2.. I was trying to flash it, but now i think i ****ed it up!..
First of all i did the HSPL thing.. And then i was trying to flash it with the original update 1.66 flash..
My mobile was saying that it was not allowed!
Now everytime i start my phone you get the bootloader with the message:
PB81100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Updrade ROM code error Please try again!..
I dont know what to do right now
Please help!
and if i try a custom rom.. it says loading... all the time?
Is there someone who can help me?
Did you tray a method with SD card?
First of all you have to format a memory card to FAT32. Then put there a image of original rom. Do do so you need download stock rom from HTC and extract it. There you find a *.nbh file, the largest one. Rename it to LEOIMG.nbh and copy to your SD card.
After that put it into a phone, an enter the bootloader mode. You have to press and hold volume down key. That's all. All you need now is to follow instructions which will be displayed on screen of your phone.
yes i did.. but ill tried the original rom:
RUU_Leo_HTC_NLD_1.43.404.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
But that one is saying: Not allowed :|
you are not the first one this happened to.
look here
http://forum.xda-developers.com/showthread.php?t=618084
here
http://forum.xda-developers.com/showthread.php?t=631276
here
http://forum.xda-developers.com/showthread.php?t=631053
it looks like hspl is not installed on your device with the line SPL-1.66.0000 XE on the screen. it should read SPL-1.42.HSPL XE when it is hsplled. flash the original shipped rom again from bootloader with a goldcard or reflash the hspl
redownload your rom as it might be corruped and causing a bad flash
especially look in the firstlink i gave you.
you have tried to flash 1.66 this is a WWE or ITArom. your device is not hspl-ed so it will not accept a dutch rom. you need a goldcard to flash a dutch rom again or try to reflash a stock WWe rom.
If you are Dutch or using NLD (or equavalent)
Get the official (from htc) ROM, rename the EXTENSION to .ZIP an/or open it with Winrar.
There is a .nbh file in it, wich you need to extract to (for example) your desktop.
Rename it to LEOIMG.nbh and put it on your MicroSD (wich MUST be formateed FAT32)
Put your microSD in the phone.
Start your phone in the BOOTLOADER (keep VOLDOWN pressed and shortly press POWER .. while keeping the voldown button)
Follow the instructions on screen.
Wait till all the options say OKE, even if your phone goes running trough the room, dont click anything!
(you will see some explanation marks and reboots, this is normal).
After you should have flashed SPL 1.66 and able to boot the official ROM.
But the problem is.. All the original roms doesnt work.. They Say "00028002 Not allowed"
The ROM error is because you try to downgrade 1.66 to 1.48, wich is (i think), not allowed, and would answer my own qeustion.
have you tried the goldcard method? if there is a language restriction somewhere this will solve this
I dont understand that goldcard methode.. or.. i cant find how i can do that :$
have never needed itmyself but look here
http://forum.xda-developers.com/showthread.php?t=591239&highlight=goldcard
How can i make a goldcard without a cellphone who can start? :O
same here....
my hd2 successfully hspled... ( 4 mounths ago)
after that i try to install official 3.14.405.2 Rom...
in installing progress i see a error and after restart say: software update failed please try again
now my spl is 3.03
and task29 and hspl 1 and 2 and 3 and any orginal roms NOT installed in my htc hd2...
plz help! :-D i really really confused
tighoor said:
same here....
my hd2 successfully hspled... ( 4 mounths ago)
after that i try to install official 3.14.405.2 Rom...
in installing progress i see a error and after restart say: software update failed please try again
now my spl is 3.03
and task29 and hspl 1 and 2 and 3 and any orginal roms NOT installed in my htc hd2...
plz help! :-D i really really confused
Click to expand...
Click to collapse
You need to remove SPL 3.03!!
Only way to remove is to flash stock rom over SD!
kurt-willems said:
You need to remove SPL 3.03!!
Only way to remove is to flash stock rom over SD!
Click to expand...
Click to collapse
i tried it... but not installed from sd :-S hahaha! now i have bricked hd2. who buy it?
maybe cotulla should make a new hspl that support 3.03 . true?
Same here,flashing stock ROM from the SD Card doesnt help,the SPL 3.03 is there wont let me pass through,we need a new HSPL or else throw the Phone into the garbage can and get a NOKIA.!!
now i understand this is a problem for many users... i find 3 others users that have this problem (in iranians forum)...
My problem too!
Hi guys!
I'm sure that my friends in xda can solve this puzzle soon!
I did every thing you think.
after flashing some coocked roms (last of them was dexter the dark one) I decided to flash an original,official rom - because I heared that many problems resolved in it - and it was the 3.14.405.2 version that I found direct download link here! I extracted the .nbh file and renamed it to leoimg.nbh and coppied it into my FAT32 formatted sandisk SD 8GB class2 ram and I held voldown btn and pressed pwr to enter rainbow screen, flashing started but it froze at 10 or 15 % . after this I tested many ways from xda and other helpers but my phone showed these screens:
if I just power it on:
grey danger triangle
Software update failed.
Please try again.
and if i hold voldown and press pwr:
in rainbow screen:
RUUNBH
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
and if I try to flash any ROMs(in this case 3.14.405.2 official rom)
1)with usb cable : continues to 1% and show in pc:
ERROR [262] : UPDATE ERROR
The ROM Update Utility has encountered communications error during the update process. The program will guiade you step-bye-step to recover from the errors so you can continue with the update.
"I DID RECOVERY IT WASN'T SUITABLE"
2)with SD card : whether I use rainbow screen or just pwr on my device , it
automatically start flashing and at the start it shows Loading... and in some cases it froze at this level and in other cases it shows this error:
00028002
not allow
And now my spl is 3.03 so HSPL can't do anything!(as I tested it)
tnx for your replies!!!
excuesme because of very low quality pics!
EDITED:
I did task29 too,
my phone couldn't do task29 and it froze at the beginning of the operation
it did not any changes;
mmsoftonline said:
Hi guys!
I'm sure that my friends in xda can solve this puzzle soon!
I did every thing you think.
after flashing some coocked roms (last of them was dexter the dark one) I decided to flash an original,official rom - because I heared that many problems resolved in it - and it was the 3.14.405.2 version that I found direct download link here! I extracted the .nbh file and renamed it to leoimg.nbh and coppied it into my FAT32 formatted sandisk SD 8GB class2 ram and I held voldown btn and pressed pwr to enter rainbow screen, flashing started but it froze at 10 or 15 % . after this I tested many ways from xda and other helpers but my phone showed these screens:
if I just power it on:
grey danger triangle
Software update failed.
Please try again.
and if i hold voldown and press pwr:
in rainbow screen:
RUUNBH
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
and if I try to flash any ROMs(in this case 3.14.405.2 official rom)
1)with usb cable : continues to 1% and show in pc:
ERROR [262] : UPDATE ERROR
The ROM Update Utility has encountered communications error during the update process. The program will guiade you step-bye-step to recover from the errors so you can continue with the update.
"I DID RECOVERY IT WASN'T SUITABLE"
2)with SD card : whether I use rainbow screen or just pwr on my device , it
automatically start flashing and at the start it shows Loading... and in some cases it froze at this level and in other cases it shows this error:
00028002
not allow
And now my spl is 3.03 so HSPL can't do anything!(as I tested it)
tnx for your replies!!!
excuesme because of very low quality pics!
EDITED:
I did task29 too,
my phone couldn't do task29 and it froze at the beginning of the operation
it did not any changes;
Click to expand...
Click to collapse
exactly THE SAME THING
flashing to offical wont help either
Hi All
I accidentally flashed an incorrect HD2 stock rom (via SD card) and now I'm stuck at the tri-colour screen with the message Upgrade ROM code error, Please try again – Does that mean that my hd2 is bricked? When i try to flash a rom it gets stuck at 0%. I have HD2 T8585 and I can't remember which stock rom it came with.
Any help would be appreciated!!
To the garbage can it goes
sent from my wifi network with my left thumb
I don't think it's bricked! Try doing task 29, it removes the OS, and then flash the correct ROM.
you need to re apply hspl. the failed stock rom flash via sd card removed hspl.
re apply hspl from bootloader over usb
re flash a rom from bootloader over usb
I tried to update ROM trough SD
update did not end and Phone restarted
now when i tried to update rom stops on 1%
after that goes to bootloader screen
if the phone is powered off there is a triangle with "!"
How could repair it
butch_bs said:
I tried to update ROM trough SD
update did not end and Phone restarted
now when i tried to update rom stops on 1%
after that goes to bootloader screen
if the phone is powered off there is a triangle with "!"
How could repair it
Click to expand...
Click to collapse
Witch Rom version did you try to set?
Way did you it by SD and not over Active Sync?
What are the informations on the bootlouder screen?
Witch stock Rom did you have before?
I had arthemis v42
and wanted to get to 3.14
i put 3.14 on SD Card and started updating
but there was error.
i had message Updating ROM Code Error
after hard reset it desapear when try to uptade ROM from SD Card
give me "00028002 Not Allowed"
and apears bootscreen -> red green blue white
on red =>
HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
When try to upgrade trough sync from bootloader starts updating and on 1%
stops updating.
Tried with Task29 but stops on 19% stops and on PC says
"ERROR 270]: Update Error
The Image File Is corrupted. Please check your Update Utility"
Sir based on the information I see; I have the impression you have a branded device or a device from a otter aria than the stock rom you try to install.
In this case you need to use the GoldCard technique to install stock rom 3.14.
Take a look on how to do this on the first page of Artemis Rom; there is a step by step guide on how to install a other stock ROM version by using GoldCard.
But I don't understand way you will forced your device to instal stock ROM over SD, even when you have receeft multiple warrenties that it wassen't posible to install.
I am done. What I do? there it is:
1. Holded VolDown and started Phone to bootloader with error "Update ROM code error. Please try again."
2. Plugged USB
3. Started this
4. Windows started
5. Update to 3.14 trough PC
Well may be first time when I tried to update rom after Arthemis v42 (it needs SSPL) I am removed HSPL. I don't know is it the problem but directly installing original ROM did not help. Hope this will help someone.
No sir,
But there are some basic rules.
First of all before install stock ROM 3.14 you need to remove your HSPL version. (use HSPL2_RUN.exe and select for ex SPL 1.66)
Secondly you need to install stock ROM 3.14 over active sync (most sure procedure (especially for non users))
Note; by install stock ROM (especially with v 3.14) you need to use the one who is for your device aria/branded device. In case you take a otter version you will get Error 260.
If you have a branded device, you need to use the GoldCard technique.
I'm sorry if it is duscussed already and if this is the wrong section but I've searched and I'm paniced (sorry if it is the wrong word but my English is not very good). I had a HD2 for 2 months already, booted Android and etc. and it all went good until today... A friend of mine gave a video in youtube in which is shown how to uninstall HSPL. I've followed everything - downloaded the official HTC rom, copied the .nbh file on the SD card, followed the instructions and everything was OK but when I tried to boot it shown the 3-color screen and message "Software update failed. Please try again". In the 3-color screen it says :
SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x05
When I enter in bootloader it gives me the same but with
"Upgrade ROM code error. Please try again."
When connect the USB cable it says "USB" and when the USB cable is disconnected it says "Serial".
If I try to install new official ROM it goes up to 1% and gives an "Error 294 Invalid vender ID".
There is no HSPL (I think so) for my version - 3.03.0000 and I don't know how to downgrade and if there is any way to downgrade.
Please, tell me if there is anything I can do to fix my phone. ;( Thank you.
you have simply tried to flash the wrong 3.14 rom. it has passed the first security test because hspl was installed, updated the spl from hspl to spl 3.03.0000 and then it has run the security test again but this time failed so the flash halts.
enter bootloader and flash ANY CORRECT stock rom. this means if your original rom was example vodafone italy, you need a vodafone italy rom, flash it over usb, job done.
Thank you very very much! It works great!
Hi,
i've booted into bootloader and i've:
PB81100 HX-BC
SPL-2.0.8.000 8G XE
MicroP(LED) 0x05
i cannot flash anything and if i put a rom into SD card it always stuck on "Loading..."
Any suggest?
Thanks
what rom (exact filename please) are you trying to flash? size of sd card? is it a regular hd2 or a tmous?
that's the rom
RUU_Leo_S_HTC_ITA_3.14.408.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
but i've tried soooo many, i suppose to be a regular, european/italy HD2.
Thanks in advance for your support!!
use hspl2 to set spl 1,66,.0000 and try the flash again. 2.08.0000 is a tmous spl and can cause problems with stock flashing.
Or, use hspl4 and set 3.03.hspl and flash from usb instead of sd. If you want to go back to full stock, once the 3.14 rom has flashed, run hspl4 again and choose 3.03.0000. Voila, all stock,.
Ok Samuel. Today i will format a new pc and i'll do as follow:
Install activesync
Install/copy hspl2 package
Connect The phone via USB and wait The pc to recognize it
Launch hspl2 and try your procedure.
IS this All right?
Thanks!!
Ok, tried as above...
hspl2, bar loading forward and backward and nothing happens!
dunno really what to do more....
sorry to hear that. All i can suggest is keep trying (correct) stock rom flashes from sd, get a different sd card, 2gb too if you can, just to test. Also try hspl4 to set 3.03, it could just be 2.08 playing up.
i've tried all HSPL4 options and nothing happens, always bars loading but not flashing.
How can i know which is the correct stock rom?
the correct one is the one that HTC.com lets you download using your phones serial/IMEI number.
Usually you can figure it out from the history of the phone, ,,, if it was received on contract from o2 in germany, the correct stock rom will be an o2 ger rom, (RUU_LEO_O2_DK) , from t mobile UK it would need a t-mo uk rom (RUU_LEO TMO_UK). Bought sim free from carphone warehouse, it uses the generic unbranded roms. (ruu_LEO_HTC_wwe)
(The ruu_filenames i quoted are examples, the format is probably slightly wrong, but you get the idea)
contacted HTC the phone is ITA no brand... i've tried ita roms, no success, if i put on sd with leoimg.nbh always stuck on "loading..."