[Q] My phone died - Optimus One, P500, V General

Hello this is my first theme. My phone entered the fastboot mod. Then i get into emergancy mod and i tried to flash with KDZ but doesn't work. I pulled the battery and tried to turn it on but does not include. I'm sory for bad english. Can anyone to hlep me?

Hello this is my first theme. My phone entered the fastboot mod. Then i get into emergancy mod and i tried to flash with KDZ but doesn't work. I pulled the battery and tried to turn it on but does not include. I'm sory for bad english. Can anyone to hlep me?
Translated:
Hello this is my first time, My phone entered to fastboot mode, Then I got into emergency mode and tried to flash with KDZ but it didn't work. I pulled the battery and tried to turn it on but it doesn't. I'm sorry for my bad English. Can anyone to help me?
Click to expand...
Click to collapse

neko95 said:
Hello this is my first theme. My phone entered the fastboot mod. Then i get into emergancy mod and i tried to flash with KDZ but doesn't work. I pulled the battery and tried to turn it on but does not include. I'm sory for bad english. Can anyone to hlep me?
Translated:
Click to expand...
Click to collapse
Thank you but can anyone to tell me how to fix my phone?

> power on your phone and hold home button until it enters fastboot mode, if does you can repeat the kdz flashing procedure, if it doesn't enter fastboot mode, you need to go on the nearest lg service center, consider your phone then.. hard bricked.

neko95 said:
> power on your phone and hold home button until it enters fastboot mode, if does you can repeat the kdz flashing procedure, if it doesn't enter fastboot mode, you need to go on the nearest lg service center, consider your phone then.. hard bricked.
Click to expand...
Click to collapse
Thank you.

Your phone will not turn on.. you shouldn't had remove the battery
Sent from my LG-P500 using xda app-developers app

Related

got stuck on android screen after update,plz help

help me plz,,,,,
i updated my phone to v20c and restarted but it got stuck on android screen (android animation working) almost 20mins are up but nothing proceeds further.plz help me urgent
Do a factory reset.
Turn phone off, then press and hang these 3 buttons:
"Vol down"; Power; Home.
After that everything should be fine.
so my phone is not dead?
do i have to worry,i dont know anything plz tell me?
btw i did what u said and still it is acting in that manner
thanx bro,thank you very much
working fine now
btw how can i restore my phone to previous version?
As long as it is turning on, you don't have to worry.
Take the battery out and put it back in. Start the phone in emergency mode by holding the back button + vol down and then power. You should have an orange yellowish screen with "emergency mode!!" On it.
Reflash the kdz but this time choose 3gqct and emergency instead of diag.
This time wait until it says upgrade finished. Don't unplug it even if it restarts. Until "==== update finished ===="
Edit: got that solved already.
Sent from my LG-P500 using XDA App
gurpreet9080 said:
thanx bro,thank you very much
working fine now
btw how can i restore my phone to previous version?
Click to expand...
Click to collapse
You can downgrade it via KDZ updater tool.
Here.
Dr.Alani said:
As long as it is turning on, you don't have to worry.
Take the battery out and put it back in. Start the phone in emergency mode by holding the back button + vol down and then power. You should have an orange yellowish screen with "emergency mode!!" On it.
Reflash the kdz but this time choose 3gqct and emergency instead of diag.
This time wait until it says upgrade finished. Don't unplug it even if it restarts. Until "==== update finished ===="
Edit: got that solved already.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
bro,do i need to download a v10e file for restoration??
and do i have to ennable usb debugging mode again in the above case of restoration ??
Re-download the same kdz you wanted or anyone else (anything p500).
If you switch to emergency mode there is no need to enable debug.
Sent from my LG-P500 using XDA App
Dr.Alani said:
Re-download the same kdz you wanted or anyone else (anything p500).
If you switch to emergency mode there is no need to enable debug.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
But.. if you booted into emergency mode, do you need to change "Phone Mode" in KDZ updater to EMERGENCY?
droidaem said:
But.. if you booted into emergency mode, do you need to change "Phone Mode" in KDZ updater to EMERGENCY?
Click to expand...
Click to collapse
Yes.
Sent from my LG-P500 using XDA App

HELP: Dead phone LG P500

Sorry if a topic in the wrong section ...
The problem is this: After a failed firmware phone, my phone will not run at all, tried to include a variety of ways, there is no reaction at all, black screen does not work ... do not turn on ..
Is there a solution how to cure a dead mode?
thats pretty vague. looks like you have a bricked phone but describe what you did
update the phone via KDZ. KDZ has written a mistake, still gleaming yellow screen, turned off the phone and all ... more it is not included ... help ....
http://forum.xda-developers.com/showthread.php?t=1183579
emergency mode not included....
Manitikyl said:
emergency mode not included....
Click to expand...
Click to collapse
what do you mean not included !?
read this >>
http://forum.xda-developers.com/showthread.php?t=1197111
Manitikyl said:
emergency mode not included....
Click to expand...
Click to collapse
i believe emergency mode is back+volume up+power
telephone does not ring at all the reactions ...
Please don't use google translate! It sucks!
sweetnsour said:
i believe emergency mode is back+volume up+power
Click to expand...
Click to collapse
Power+VolDown+Home isn't it?
Sent from my LG-P509 using XDA App
InfiniteRisen said:
Power+VolDown+Home isn't it?
Sent from my LG-P509 using XDA App
Click to expand...
Click to collapse
Be careful, one of those key combination will reset the phone to factory defaults.
And it doesn't ask for permission when it does...
InfiniteRisen said:
Power+VolDown+Home isn't it?
Sent from my LG-P509 using XDA App
Click to expand...
Click to collapse
this is to boot into recovery. im talking about emergency mode
Da_Android said:
Be careful, one of those key combination will reset the phone to factory defaults.
And it doesn't ask for permission when it does...
Click to expand...
Click to collapse
a factory reset will be performed if you dont have a custom recovery. if you do have one, this is the combo to boot into it
from my thread >>>
Hello,
- i'm the proud owner of an LG P500, i mannaged to "kill" it alot of times, one time i bricked it so bad the power button was useless. I'm going to tell you how i always manneged to fix it.
1. - install the USB DRIVERS for LG P500 Download LINK
2. - extract the KDZ archive , install msxml.msi, Download LINK, Download Froyo 2.2.2. v10E.kdz after that open >> KDZ_FW_UPD.exe, select type 3GQCT and mode DIAG (select this only if your phone starts when you connect the USB and the battery charging logo apears) if the phone starts in Emergency Mode or dosen't start at all >> remove battery and while holding the BACK and volume UP buttons connect the USB, the phone should start in Emergency Mode, after that select in KDZ, MODE > EMERGENCY, select file > V10E_00.kdz and press the "Launch software update" .
- wait for KDZ to do it's job ( until it says FINISHED) after it is finished it will reset the phone (alot of times the phone wolden't start after reset and i had to start it manualy @power button) an LG logo should apear , then an Android logo, wait about 5 - 10 min (the phone should start and you will have froyo 2.2.2. working), but if the Android LOGO stops or lags for 2,3 seconds then you must remove battery , put it back , and power on the phone. if it dose the same thing , then you must reflash your phone. Usualy it works with the battery on and simply flashing under DIAG mode.
- after reflashing if you have the same problem , you must remove battery and try installing it DIAG mode. if it still dosen't work enter emergency mode ( UP + BACK + connect USB (or press the power button)) and reflash using KDZ , MODE >>> EMERGENCY.
- when phone is connected go to COMPUTER > PROPERTIES > DEVICE MANAGER > MODEMS > and disable LGE Modem.. (some say it helps i diden't saw any difference.)
- as i was saying i killed my phone alot of times, KDZ always helped me bring it back to life , be patient.. and if you get alot of errors and flash meny times the phone gets hot , leave it to cool for a while and then try again.
be patient !! hope this will help you ..
sorry for my bad english !!
you really need to stop posting that without giving proper credits
these links cover exactly what youve said
http://forum.xda-developers.com/showthread.php?t=1060121
http://forum.xda-developers.com/showthread.php?t=875881
Sent from my LG-P500 using XDA Premium App

optimus will not turn on

my optimus one will not turn on ... not even when I press back and volume up key and plug in the usb cable. I've taken the battery out and tried to load it too. does someone know what i could do else?. sorry for the bad english, I'm using google translator
Have you installed a custom ROM or Kernel?
yes i have
cyanogenmod 7 version 6.5.4
franco kernel 19.4
hmm
start charging of the phone
phone will start then
cyan have feature that if you start charging phone wake up
this should help if not then you bricked your device
i tried to charge, but nothing happens...but at last i tried to make the official firmware on my phone...then i turned it off and since then nothing happens with my phone.i hope that its not bricked
hi
check if the batter's genuine..aspee's right, charge the phone..
try this:
Emergency mode
Code:
press and hold volume up and the back key then press power
then proceed to re-flash via KDZ..
if you turn off youre phone when kdz updater was working , then you got only one chance to get him alive , guarranty. Or service with J-TAG.
I had same problem !
what is j-tag?
flash kdz again all problem will solve (use the guide that in our forum)
and if emergency mode is not working then your phone is bricked or buttons are broken
anyway good luck,
brandiboy said:
my optimus one will not turn on ... not even when I press back and volume up key and plug in the usb cable. I've taken the battery out and tried to load it too. does someone know what i could do else?. sorry for the bad english, I'm using google translator
Click to expand...
Click to collapse
Definitely bricked
Sent from my LG-P500 using xda premium
brandiboy said:
what is j-tag?
Click to expand...
Click to collapse
Developer tools , which is expensive kit Telephone services company's use that for refurbish telephones

Asus Zenfone 5 wont turn on

Hi, i have problem with zenfone 5. My brother tried to install new android using wireless update in phone(auto update function). So the update downloaded just fine and phone was turned off like its gonna install update but never turned on after this, i tried everything but cant turn it on. I cant even get asus logo, absolutly nothing. When i turn it on charger led dosent show up, tried to enter droidmode(vol up + power) for 10min but nothing. My first guess will be dead MBO but its really weird that this is happen in same time the update was, so probably is something software related.
Bump
Sent from my iOCEAN X7 using Tapatalk
asus zenfone 5 wont turn on
we have same problem, I tried to wipe cache partition for battery consumption purposes but i cancelled it, it seems to long to process erasing the cache so i cancelled it by holding power button + volume up then, wont turn on, itried to charge it, while holding power button + volume up the asus logo appear after that, the battery logo display appear (white side and black battery)
exzzy said:
Hi, i have problem with zenfone 5. My brother tried to install new android using wireless update in phone(auto update function). So the update downloaded just fine and phone was turned off like its gonna install update but never turned on after this, i tried everything but cant turn it on. I cant even get asus logo, absolutly nothing. When i turn it on charger led dosent show up, tried to enter droidmode(vol up + power) for 10min but nothing. My first guess will be dead MBO but its really weird that this is happen in same time the update was, so probably is something software related.
Click to expand...
Click to collapse
hi i am having the exactly same problem, could you tell how did you solve it??
Please i need help.
thank you
Start the phone by pressing power key + volume up and then select the option reboot worked for me!!
Thank you..
It worked for me also, :good:
That's bootloop dude. You need to flash your phone using fastboot. Flash the latest firmware .60 lollipop
Cannot start the phone
AkcezzInc said:
That's bootloop dude. You need to flash your phone using fastboot. Flash the latest firmware .60 lollipop
Click to expand...
Click to collapse
Whats 'the latest firmware .60'? can explain to me how to install it.
Facing the same problem(zenfone 5 not gettting started after update)
Even fastboot is not working for reboot
Pls help...!!!!
Thanx...!!!
skm14747 said:
Even fastboot is not working for reboot
Pls help...!!!!
Thanx...!!!
Click to expand...
Click to collapse
U need to flash it with new rom via fastboot with adb command... flash recovery.img first then flash new rom... .. whatever u want to flash jb,kk or loli but i recommend u to jb 4.3 .
Hi hendikj
hendikj said:
U need to flash it with new rom via fastboot with adb command... flash recovery.img first then flash new rom... .. whatever u want to flash jb,kk or loli but i recommend u to jb 4.3 .
Click to expand...
Click to collapse
Could you please explain how to do this tasks as i am new to all these words. pls.
U need to charge u r device Press power + up volume boot into boot loader...unlock bootloader then reboot from fastboot mode...it works for me..
fastboot is not getting open
hendikj said:
U need to flash it with new rom via fastboot with adb command... flash recovery.img first then flash new rom... .. whatever u want to flash jb,kk or loli but i recommend u to jb 4.3 .
Click to expand...
Click to collapse
i'm not able to open fastboot after update
Thanks. It Worked for me !
williamzerner said:
Start the phone by pressing power key + volume up and then select the option reboot worked for me!!
Click to expand...
Click to collapse
wont turn on..
does anyone has a problem phone wont turn on even pressing power key + volume up.you hear the sound when you connected to pc...like your phone is restarted.you only hear the sound but no display.no led light.no vibration.
this problem came when i unlock bootloader then i restart my phone then it didnt turn it on..sory for my bad english
davidjay26 said:
wont turn on..
does anyone has a problem phone wont turn on even pressing power key + volume up.you hear the sound when you connected to pc...like your phone is restarted.you only hear the sound but no display.no led light.no vibration.
this problem came when i unlock bootloader then i restart my phone then it didnt turn it on..sory for my bad english
Click to expand...
Click to collapse
same here! :crying:
Same problem here
davidjay26 said:
wont turn on..
does anyone has a problem phone wont turn on even pressing power key + volume up.you hear the sound when you connected to pc...like your phone is restarted.you only hear the sound but no display.no led light.no vibration.
this problem came when i unlock bootloader then i restart my phone then it didnt turn it on..sory for my bad english
Click to expand...
Click to collapse
Same over here too, did you solve your problem?

[Q] [HELP] No Donwload Mode, No Recovery Mode. Can't access to device

Dear to master...
Please help me... i just want install recovery (phipz) but wrong format
First time, I had tried to unlock boot-loader and already success.
and the second step, i will update recovery philpz using terminal emulator but i wrong send a command.
"dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p6"
mmcblk0p6 was broken
I think it was wrong adress..
Now after reboot my phone no response to either download or recovery menu.
I've tried to connect to the laptop in but not to detect in device manager.
Help me please...
My device LG G2 Mini ( D618 dual version )
You have hard bricked your device.
In the second link, you can see that p6 is aboot. If you flash an invalid img there, then your device's bootloader will get wrecked.
Check my signature to see how I "fixed" it.
http://forum.xda-developers.com/showthread.php?t=2890089
http://forum.xda-developers.com/showthread.php?t=2828093
Sent from my GT-I5500 [CM11]
Vagelis1608 said:
You have hard bricked your device.
In the second link, you can see that p6 is aboot. If you flash an invalid img there, then your device's bootloader will get wrecked.
Check my signature to see how I "fixed" it.
http://forum.xda-developers.com/showthread.php?t=2890089
http://forum.xda-developers.com/showthread.php?t=2828093
Sent from my GT-I5500 [CM11]
Click to expand...
Click to collapse
Thank you for your answer..
I've opened the link, but the problem is different. I can not get into the download menu or recovery menu.
So, the last condition when I plug it into the computer only hear sound connect and disconnect like beep.
If I hold power button until 5 second. There is only show logo battery with level 0 % but if I plug it into the charger / power does not go out there and no display battery logo charging process only black screen.
What should i do ? :crying:
al_boy said:
Thank you for your answer..
I've opened the link, but the problem is different. I can not get into the download menu or recovery menu.
So, the last condition when I plug it into the computer only hear sound connect and disconnect like beep.
If I hold power button until 5 second. There is only show logo battery with level 0 % but if I plug it into the charger / power does not go out there and no display battery logo charging process only black screen.
What should i do ? :crying:
Click to expand...
Click to collapse
This is exactly what happened to me as well.
Just sent it to service and tell them that "It broke on its own".
Unless it's picked up by a Linux PC. Then try this.
Sent from my D620R [Stock 4.4.2]
Vagelis1608 said:
This is exactly what happened to me as well.
Just sent it to service and tell them that "It broke on its own".
Unless it's picked up by a Linux PC. Then try this.
Sent from my D620R [Stock 4.4.2]
Click to expand...
Click to collapse
Hi Master...
My phone was no response at all. can not live, no download mode, no recovery mode. it looks like the damage was already severe. I have to take it to the LG service center to resolve this issue. Before the warranty runs out.
Thanks for trying to help my problem..
Warm Regard.

Categories

Resources