I'm really in trouble!
I have installed firmware 4.0.25 but unfortunately it does not work on my device (Why? I don't know! and Archos support center don't answer me after 3 times asking!!)
My device hang on Archos logo on startup. I try to downgrade it to older version by choosing "Update Firmware" on "Archos A80S Recovery" menu but it show me: "Update Failed: (221)"
I also try to get help from SDE firmware but it show me that message (Update failed) again!
What can I do? I'm so desperate!
Masih60 said:
I'm really in trouble!
I have installed firmware 4.0.25 but unfortunately it does not work on my device (Why? I don't know! and Archos support center don't answer me after 3 times asking!!)
My device hang on Archos logo on startup. I try to downgrade it to older version by choosing "Update Firmware" on "Archos A80S Recovery" menu but it show me: "Update Failed: (221)"
I also try to get help from SDE firmware but it show me that message (Update failed) again!
What can I do? I'm so desperate!
Click to expand...
Click to collapse
What are you developing? If you only made thus topic for the issue, it wuold belong to general.
Try formatting the whole device from recovery (wipes android os, data and internalsd) and then installing the 4.0.7. Also, keep 4.0.25 in hand, if 4.0.7 fails.
Sent from my GT-I9100 using xda app-developers app
Masih60 said:
I'm really in trouble!
I have installed firmware 4.0.25 but unfortunately it does not work on my device (Why? I don't know! and Archos support center don't answer me after 3 times asking!!)
My device hang on Archos logo on startup. I try to downgrade it to older version by choosing "Update Firmware" on "Archos A80S Recovery" menu but it show me: "Update Failed: (221)"
I also try to get help from SDE firmware but it show me that message (Update failed) again!
What can I do? I'm so desperate!
Click to expand...
Click to collapse
Hi !
What is your device ? , please post here the complete name :
( like mine : Archos 101 Gen9 Turbo 1.2GHz TI OMAP4430 ! )
surdu_petru said:
Hi !
What is your device ? , please post here the complete name :
( like mine : Archos 101 Gen9 Turbo 1.2GHz TI OMAP4430 ! )
Click to expand...
Click to collapse
My device is: ARCHOS 80 G9 - 8 GB
Thanks again for trying to help man!
julle131 said:
What are you developing? If you only made thus topic for the issue, it wuold belong to general.
Try formatting the whole device from recovery (wipes android os, data and internalsd) and then installing the 4.0.7. Also, keep 4.0.25 in hand, if 4.0.7 fails.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I can't install non of ICS on my device! I don'nt know why! After installation, a message appear that say: "Updating software..." And after 30 minutes nothing happen! As I said, I have been contact ARCHOS customer center about this problem but nothing reply!!! It seems they can't fix my problem to upgrading device too!! lol
Masih60 said:
My device is: ARCHOS 80 G9 - 8 GB
Thanks again for trying to help man!
Click to expand...
Click to collapse
Ok !
First, please re-download Archos firmware .aos ! ( 4.0.25 )
Reset your device ( press & keep Power Off button about 10 sec ! )
- connect USB cable
- boot in recovery -> Forma System -> Reformat Device -> I Understand -> OK -> now, copy archos-firmware.aos on the new driver that appear ! , do not disconnect USB cable, check OK and let your firmware to install !
....please, try this way and let me know if it help you ! :good:
surdu_petru said:
Ok !
First, please re-download Archos firmware .aos ! ( 4.0.25 )
Reset your device ( press & keep Power Off button about 10 sec ! )
- connect USB cable
- boot in recovery -> Forma System -> Reformat Device -> I Understand -> OK -> now, copy archos-firmware.aos on the new driver that appear ! , do not disconnect USB cable, check OK and let your firmware to install !
....please, try this way and let me know if it help you ! :good:
Click to expand...
Click to collapse
I re-download it and do all the stuff! It seems 4.0.25 is only firmware that don't show error 221! It installed successfully but after reboot, my device hang on ARCHOS logo on starting up!
Masih60 said:
I re-download it and do all the stuff! It seems 4.0.25 is only firmware that don't show error 221! It installed successfully but after reboot, my device hang on ARCHOS logo on starting up!
Click to expand...
Click to collapse
Ok ! Try than other option, like Reset Device in recovery ! and reboot ...maybe will go :good:
After installation Firmware 4.0.25 , you can not flash other old firmware , so get those errors !
surdu_petru said:
Ok ! Try than other option, like Reset Device in recovery ! and reboot ...maybe will go :good:
After installation Firmware 4.0.25 , you can not flash other old firmware , so get those errors !
Click to expand...
Click to collapse
I tried every option on menu but my problem still exist! As you said, I can't downgrade and I can't upgrade to 4.025 too! Then what can I do? (
Masih60 said:
I tried every option on menu but my problem still exist! As you said, I can't downgrade and I can't upgrade to 4.025 too! Then what can I do? (
Click to expand...
Click to collapse
If you have not installed SDE recovery.... you can send it on service centre for reparation.
Related
Can anyone help?
my archos 101 g9 is rooted and has 4.0.5 on it, but i was thinking about selling it, so me being a prat, i went into recovery and went to format system, then went to reset android, and then restarted the archos, but once it restarted it froze on the android entertainment part and i cant get past it now.
what have i done????
someone please tell me this is fixable.
You may try to flash the original firmware: http://forum.xda-developers.com/showthread.php?t=1633465
I plan to keep the ICS 4.0.5, dont want to go back, all i tried to do was wipe the data off the tablet so that i can sell it.
example = clear all the things i had installed like gmail, facebook etc etc as i didnt want the man to use my details.
MrLarner said:
I plan to keep the ICS 4.0.5, dont want to go back, all i tried to do was wipe the data off the tablet so that i can sell it.
example = clear all the things i had installed like gmail, facebook etc etc as i didnt want the man to use my details.
Click to expand...
Click to collapse
It's most likely you made Reformat instead of Reset. Now the best way is to download official firmware from Archos web site (now it has the latest 4.0.6 version) and install it according to the instructions on the website.
ILMagus said:
It's most likely you made Reformat instead of Reset. Now the best way is to download official firmware from Archos web site (now it has the latest 4.0.6 version) and install it according to the instructions on the website.
Click to expand...
Click to collapse
no i definatly clicked reset and then after restarting it just didnt go past the archos entertainment part, i've tried about 5 times now, it just freezes.
MrLarner said:
no i definatly clicked reset and then after restarting it just didnt go past the archos entertainment part, i've tried about 5 times now, it just freezes.
Click to expand...
Click to collapse
Hi !
Please use "Reformat Device" ! - and than download and flash what firmware you want => http://forum.xda-developers.com/showthread.php?t=1468925 .
surdu_petru said:
Hi !
Please use "Reformat Device" ! - and than download and flash what firmware you want => http://forum.xda-developers.com/showthread.php?t=1468925 .
Click to expand...
Click to collapse
Thanks, only problem is, which i forgot, is after i rooted my archos my girlfriend then went and erased all the different files etc off the computer, so when i connect my archos to the computer, its not showing up anymore.
so because im already rooted, will it be a long process or do i just need to download whats needed for the computer to see my archos?
if so, after i've done that, can i then go ahead and simply apply the 4.0.6 onto the internal memory and install it?
MrLarner said:
Thanks, only problem is, which i forgot, is after i rooted my archos my girlfriend then went and erased all the different files etc off the computer, so when i connect my archos to the computer, its not showing up anymore.
so because im already rooted, will it be a long process or do i just need to download whats needed for the computer to see my archos?
if so, after i've done that, can i then go ahead and simply apply the 4.0.6 onto the internal memory and install it?
Click to expand...
Click to collapse
First...can you enter in SDE or recovery menu ? ....
...no need any driver for connect your device !!!!
Follows that :
1 - download your favorite firmware ;
2 - connect usb cable ;
3 - press power 10 s until the green light goes out;
4 - now press volume down and at the same time press power ( for 2~3s) and keep volume down until you see SDE menu ( recovery) on your screen
5 - go to Update Firmware -> and copy here original .aos file ( you have just downloaded it above)
Good luck !
surdu_petru said:
First...can you enter in SDE or recovery menu ? ....
...no need any driver for connect your device !!!!
Follows that :
1 - download your favorite firmware ;
2 - connect usb cable ;
3 - press power 10 s until the green light goes out;
4 - now press volume down and at the same time press power ( for 2~3s) and keep volume down until you see SDE menu ( recovery) on your screen
5 - go to Update Firmware -> and copy here original .aos file ( you have just downloaded it above)
Good luck !
Click to expand...
Click to collapse
If the archos is off, i can turn it on into recovery yes, your saying to download my favourite firmware but im asuming that'll be done on computer yes? As i cant do it on archos.
Then you say connect usb, but when i connect usb, my archos is not showing up on computer.
And if its not showing up, how am i ment to send my chosen firmware to the archos?
MrLarner said:
If the archos is off, i can turn it on into recovery yes, your saying to download my favourite firmware but im asuming that'll be done on computer yes? As i cant do it on archos.
Then you say connect usb, but when i connect usb, my archos is not showing up on computer.
And if its not showing up, how am i ment to send my chosen firmware to the archos?
Click to expand...
Click to collapse
Hi !
Please follow the steps exactly !
- you do not need to download .aos into PC, you can download directaly into archos ! ...
"
Then you say connect usb, but when i connect usb, my archos is not showing up on computer
Click to expand...
Click to collapse
." - no matter !!! - just do exactaly ...step by step !
- for download .aos into archos : when you get to "Update firmware" -> download here .aos firmware !
BIG BIG thank you to surdu_petru.
I followed your instructions and i've got it working again on 4.0.6.
thank you so much
Can anyone please help me with this? I have HTC Sensation with CM10. This tablet without root is uselles...
Anyone?
How did you put CM10 on it without root?
post-mortem said:
How did you put CM10 on it without root?
Click to expand...
Click to collapse
Read carefully what I wrote.
I have HTC Sensation with cm10. Its my dailly driver.
Goclever R75 i bought becouse it was cheap But what is android without root? And I cant get any information about that on this tablet...
No one know how to do that?
Okay
I have root
First U must turn on debuging mode and unknown sources.
then connect tablet to PC and install drivers from package in atachments.
Then double click on "ICS_Root_Unlocker.bat" and follow instructions!
is it function? no problems?
Yes this works. Ive done this 2 times
Hi! Can you please tell me how to instal drivers from that package?
If u dont know how 2 do that... Please do not root your device!
devgron said:
If u dont know how 2 do that... Please do not root your device!
Click to expand...
Click to collapse
Hi again, thanks for your concern but it's not my first time when a try to root a device. I have a sony x8 rooted and a rom on it but never needed to instal something like that to root so can you please tell me how do i get over that spep? Sorry for my english.
devgron said:
Okay
I have root
First U must turn on debuging mode and unknown sources.
then connect tablet to PC and install drivers from package in atachments.
Then double click on "ICS_Root_Unlocker.bat" and follow instructions!
Click to expand...
Click to collapse
I just hoped I haven't bricked my R75
It all went as it should until I ran ICS_Root_Unlocker.bat. It kept reporting device not found and than tablet rebooted itself. Logo of ICS appeared but after that it went totally blank. I could still use ADB to access tablet. All adb options that I tried worked - get state, etc. So I tried adb reboot bootloader and after ICS logo I got red triangle with exclamation mark. As I don't have volume up/down as physical buttons I am stuck - I can not access Android system recovery menu. Hardware usb keyboard works - I can reboot with tablet with it, for example. If I connect tablet to PC it is not recognized anymore. Any idea on what to do?
Kurjak78 said:
I just hoped I haven't bricked my R75
It all went as it should until I ran ICS_Root_Unlocker.bat. It kept reporting device not found and than tablet rebooted itself. Logo of ICS appeared but after that it went totally blank. I could still use ADB to access tablet. All adb options that I tried worked - get state, etc. So I tried adb reboot bootloader and after ICS logo I got red triangle with exclamation mark. As I don't have volume up/down as physical buttons I am stuck - I can not access Android system recovery menu. Hardware usb keyboard works - I can reboot with tablet with it, for example. If I connect tablet to PC it is not recognized anymore. Any idea on what to do?
Click to expand...
Click to collapse
Hi, I have same problem. Did you get fix for this??
zefer79 said:
Hi, I have same problem. Did you get fix for this??
Click to expand...
Click to collapse
No. Fortunately I was able to exchange it for the new one.
Kurjak78 said:
No. Fortunately I was able to exchange it for the new one.
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Bye.
orlairet conde
I have R75. It would be great if you could upload rooted version to sendspace. Thank you.
bugxyz said:
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Bye.
Click to expand...
Click to collapse
Kurjak78 said:
I have R75. It would be great if you could upload rooted version to sendspace. Thank you.
Click to expand...
Click to collapse
Hello!
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
WIFI not working and sensor keys bad workimg
bugxyz said:
Hello!
This is the link for R75 rooted firmware.
xxxx
I hope it helps you.
Bye.
Click to expand...
Click to collapse
:/ after install to "bricked" goclever tab r75 android from link xxx provided by bugxyz android run. .. wifi not working and senzor keys are shifted please help me :/ sorry for my bad english i am czech and the screen is shifted
Hello.
If you have those problems it means that you have an goclever tab 7500 and not an R 75. I saw that some contries 7500 was sold as R 75.
I had the same problem as you when I have flashed my R 75 with 7500 firmware.
I will upload also the 7500's firmware and provide the link when it is uploaded.
I hope this will help you.
Ps: 7500 firmware is unrooted.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
Sent from my LG-P990 using Tapatalk
thx
Thank you very much, it helped. how should I do to make me root it got broken again
declara kvide
bugxyz said:
Hello!
This is the link for R75 rooted firmware.
I hope it helps you.
Bye.
Click to expand...
Click to collapse
Bugxyz, you are a savior. Thank you.
Hello everyone,
I was trying to launch fastboot but instead of that (I'm not the smartest I guess), I did a full destroy of the system (I think I pressed the power button more than 3 times then got a message telling me to press POW+VOL DOWN to destroy the system, which I did )
Now, when I try to start the tablet, I get nothing but a the red button on. Under windows, it's not detected and the drivers don't install, all I have is :
"other devices ==> APX" in my device manager.
Can someone help me revive the tablet (if it's still possible)?
Thanks!!!
Josefon said:
Hello everyone,
I was trying to launch fastboot but instead of that (I'm not the smartest I guess), I did a full destroy of the system (I think I pressed the power button more than 3 times then got a message telling me to press POW+VOL DOWN to destroy the system, which I did )
Now, when I try to start the tablet, I get nothing but a the red button on. Under windows, it's not detected and the drivers don't install, all I have is :
"other devices ==> APX" in my device manager.
Can someone help me revive the tablet (if it's still possible)?
Thanks!!!
Click to expand...
Click to collapse
Same happened to me and I panicked. I solved it with this guide
http://forum.xda-developers.com/showthread.php?t=1458876
After that, you can do all the necessary pugrades, etc, for CM10 A4 and get your folio working again
yellowumbrella said:
Same happened to me and I panicked. I solved it with this guide
http://forum.xda-developers.com/showthread.php?t=1458876
After that, you can do all the necessary pugrades, etc, for CM10 A4 and get your folio working again
Click to expand...
Click to collapse
Thanks for your help, I have read the whole post and have managed to revive the tablet thanks to NVflash. I used the 16g version as the tablet is a 16g, but I'm stuck to CWM v0.3 and it seems there's nothing I can install under there. Where did you go from there, did you use fastboot to load another rom? Nothing will install under CWM which is making me confused...
Thanks again for your help!!
Josefon said:
Thanks for your help, I have read the whole post and have managed to revive the tablet thanks to NVflash. I used the 16g version as the tablet is a 16g, but I'm stuck to CWM v0.3 and it seems there's nothing I can install under there. Where did you go from there, did you use fastboot to load another rom? Nothing will install under CWM which is making me confused...
Thanks again for your help!!
Click to expand...
Click to collapse
As long as your tablet is out of APX, you should be able to just go ahead and follow this
http://forum.xda-developers.com/showthread.php?t=1864774
to get updated to the latest CM10
Hi guys,
I was following this guide to upgrade my Sanei n10: http://forum.xda-developers.com/showthread.php?t=1821398
In recovery mode I have installed the rom.zip, but after I pressed the wrong button and it turned off.
Now, when I turn it on, leave the writing sanei and after few second remains on black screen.
If I try to entry in recovery mode with the vol+ button, it remains with the Android robot lying down with a red tiangolo, with no options.
What can I do to recover my tablet?
Thanks to all
---
Driver
idulkoan said:
instead of reflashing the rom, to get this device to boot you will probably have to reflash the sanei. This can be done with livesuit.
Click to expand...
Click to collapse
I can not find a driver that works ... Can you help me?
---
idulkoan said:
try these drivers:
Click to expand...
Click to collapse
Nothing... It doesn't work..
---
idulkoan said:
do you have skype? i can try to help you out through that
then if we get a solution ill post it here for the rest of xda to see lol
Click to expand...
Click to collapse
I have Skype, could you plz help me ?
Thanks in advance
Nrupesh
---
idulkoan said:
do you have skype? i can try to help you out through that
then if we get a solution ill post it here for the rest of xda to see lol
Click to expand...
Click to collapse
Hello,
I'm sorry for the time that has passed, I had to do ...
I'm back to grips with my Sanei N10 ... I also formatted the PC, but the drivers do not work!!
Thank you for your help!
---
idulkoan said:
What displays on the computer when you enter your sanei n10 into "flash mode" ? [When trying to flash it with livesuit]
Click to expand...
Click to collapse
the problem is that the pc don't recognizes the tablet.
when i plug in the usb cable, windows find a new device but don't install the drivers... I have tried with the file in the previous post but don't work...
I have a general device called "Android" without drivers...
then, livesuite or another software don't recognizes the tablet...
What I have to to?
up
hmm
---
Hello,
I recently switched to kitkat but after flashing I realised that the stock rom has too much bloatware and was practically very annoying to use (I'm looking at you, Norton and LeSave.
Now here's my problem:
I can't flash anything anymore using flashtool, it detects my phone, loads one file, but then goes down to 0bytes/0bps and it keeps hanging there untill I get an error. I tried to get a workaround by rooting and installing TWRP it but nothing works, it refuses to root.
Can anyone help me? I don't know what I did wrong and I'm afraid I messed up my partitions or something.
I just want to go back to Jellybean with a clean rom, no bloatware, preferrably rooted.
Thanks in advance,
Biscuit
Errors I get:
''BROM ERROR: S_FT_READBACK_FAIL (4009)''
Google didn't get me any further ):
VoodooBiscuit said:
Hello,
I recently switched to kitkat but after flashing I realised that the stock rom has too much bloatware and was practically very annoying to use (I'm looking at you, Norton and LeSave.
Now here's my problem:
I can't flash anything anymore using flashtool, it detects my phone, loads one file, but then goes down to 0bytes/0bps and it keeps hanging there untill I get an error. I tried to get a workaround by rooting and installing TWRP it but nothing works, it refuses to root.
Can anyone help me? I don't know what I did wrong and I'm afraid I messed up my partitions or something.
I just want to go back to Jellybean with a clean rom, no bloatware, preferrably rooted.
Thanks in advance,
Biscuit
Errors I get:
''BROM ERROR: S_FT_READBACK_FAIL (4009)''
Google didn't get me any further ):
Click to expand...
Click to collapse
You messed up everything!
Hmmm... you need a custom firmware if you want something light !
Like life 0.7 !
If you want a custom made firmware fot the chinese base but without bloatware and rooted you can try Baralajbi firmware.
Good Luck.
stympy said:
You messed up everything!
Hmmm... you need a custom firmware if you want something light !
Like life 0.7 !
If you want a custom made firmware fot the chinese base but without bloatware and rooted you can try Baralajbi firmware.
Good Luck.
Click to expand...
Click to collapse
I have the same exact problem...
I am trying to flash Baralajbi firmware but it goes down to 0bytes/0bps and it keeps hanging there until I get an error.
How can we flash anything (as you advice) if Flash tools do not work?
Partitions are really messed up. In the recovery menu ("No command" screen with dead android ) I am trying the "apply update from sdcard" option , and it redirects me to the internal memory!
Chinese phone , tried P780_ROW_S228 rom but it is laggy and cellural reception is poor ! Gps malfunctioning also...
katsanos said:
I have the same exact problem...
I am trying to flash Baralajbi firmware but it goes down to 0bytes/0bps and it keeps hanging there until I get an error.
How can we flash anything (as you advice) if Flash tools do not work?
Partitions are really messed up. In the recovery menu ("No command" screen with dead android ) I am trying the "apply update from sdcard" option , and it redirects me to the internal memory!
Chinese phone , tried P780_ROW_S228 rom but it is laggy and cellural reception is poor ! Gps malfunctioning also...
Click to expand...
Click to collapse
Hi. Try this. Retry to flash but this time when flash tool do nothing, open the back cover of your phone and keep the red button pressed for 20 seconds. When you release the button flashing process should start.
Tell me if not.
If not... Reinstall the drivers... and repeat the flashing process.
Sent from my Lenovo P780
stympy said:
Hi. Try this. Retry to flash but this time when flash tool do nothing, open the back cover of your phone and keep the red button pressed for 20 seconds. When you release the button flashing process should start.
Tell me if not.
If not... Reinstall the drivers... and repeat the flashing process.
Sent from my Lenovo P780
Click to expand...
Click to collapse
it didn t work.
The moment i press the reset (red) button ,the classic Flash Tools errors appears . The same as before
When you say "reinstall the drivers" what do you mean?
is it the proccess described here? http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
satanduck said:
Open "Device Manager" on your Windows PC.
Plug in your phone through the micro USB cable. A device will show up for a few seconds in "Device Manager". After that, it will disappear again!
Recognize the device tree where it appeared, and wait for it as you unplug and plug in your phone again (if bootloop, its automatic!)
Catch it with a right click as it appears! Then choose "Update Drivers" and pick the directory where you uncompressed the drivers you downloaded above. Its ok if after catching it the device disconnects. You only need to install the drivers now.
Assuming the drivers are correctly installed, run the Smart Phone Flash Tool.
Click to expand...
Click to collapse
katsanos said:
it didn t work.
The moment i press the reset (red) button ,the classic Flash Tools errors appears . The same as before
When you say "reinstall the drivers" what do you mean?
is it the proccess described here? http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
Click to expand...
Click to collapse
Nope
Tutorial and drivers here.
Scroll down to my seccond post.
stympy said:
Nope
Tutorial and drivers here.
Scroll down to my seccond post.
Click to expand...
Click to collapse
Thanks for all your answers. I think its great that you are helping all those people,like me with our stubborn devices!
Tried what you proposed,but No, it didn t work either. Even tried installing the MTK drivers from scratch to an other "clean" laptop, on which i had never before connected my p780... No luck there either. Still Flash Tools refuse to do anything
katsanos said:
Thanks for all your answers. I think its great that you are helping all those people,like me with our stubborn devices!
Tried what you proposed,but No, it didn t work either. Even tried installing the MTK drivers from scratch to an other "clean" laptop, on which i had never before connected my p780... No luck there either. Still Flash Tools refuse to do anything
Click to expand...
Click to collapse
do you have time for a team viewer sesion ?
Yes, of course . I am sending you a pm
Sent from my SM-T310 using Tapatalk
stympy said:
do you have time for a team viewer sesion ?
Click to expand...
Click to collapse
thanks for everything ! :good::good:
everything seems allright now
katsanos said:
thanks for everything ! :good::good:
everything seems allright now
Click to expand...
Click to collapse
You are wellcome!