Hi Team,
I have Archos 70 IT and I am currently running Urukdroid latest version. Can someone please point me to the guide/thread to go back to stock rom?
Thanks,
When you (re)boot with the volume down button pressed, you should get the Archos boot menu where you can boot the stock Archos ROM.
Related
Hi everyone,
It seems that I have run into a problem and was wondering if anybody can help me out.
I had successfully rooted and installed a custom ROM on my Galaxy Tab 10.1 (P7500) on Rogers. The problem starts when I got a message that a software update for the Galaxy Tab 10.1, thinking the HC 3.2 update, was available and downloaded it and installed it. After install, the Tab rebooted and now all I get is a black screen after bootup.
Tried pushing the power button and volume down button together but still no luck.
Anybody out there that could help?
Thanks in advance
Your saying you can't get into recovery or download mode? Also, could you tell me exactly how you rooted your tab?
dymc84 said:
Hi everyone,
It seems that I have run into a problem and was wondering if anybody can help me out.
I had successfully rooted and installed a custom ROM on my Galaxy Tab 10.1 (P7500) on Rogers. The problem starts when I got a message that a software update for the Galaxy Tab 10.1, thinking the HC 3.2 update, was available and downloaded it and installed it. After install, the Tab rebooted and now all I get is a black screen after bootup.
Tried pushing the power button and volume down button together but still no luck.
Anybody out there that could help?
Thanks in advance
Click to expand...
Click to collapse
What custom rom did you install? Most of the latest roms are on 3.2 already. Is it completely black or does it glow when you are in a dark room? If it glows press the powet button till it is completely off then try pressing power and volume down at rhe same time.
Sent from my GT-P7510 using Tapatalk
I rooted it through ODIN and it was the Overload CFW for HC 3.1
I was on HC 3.1 until I decided to upgrade to HC 3.2 and that's when it all went black. I still get the Samsung Galaxy Tab 10.1 logo, and was finally able to get it into download mode just now.
Any way I could revert back to stock?
you can odin to stock with a variety of stock ROMs from here
http://forum.xda-developers.com/showthread.php?t=1171089
but do you still have recovery on it? just boot into recovery and flash a 3.2 ROM.
dymc84 said:
I rooted it through ODIN and it was the Overload CFW for HC 3.1
I was on HC 3.1 until I decided to upgrade to HC 3.2 and that's when it all went black. I still get the Samsung Galaxy Tab 10.1 logo, and was finally able to get it into download mode just now.
Any way I could revert back to stock?
Click to expand...
Click to collapse
We seem to be in the same boat - mine bricked last night as well and roughly the same time as you posted .
Horrible to have my first post on here be of this nature, but so be it
I will give feedback if I get mine fixed with the above described methods - and a few others I have found on the net.
---------- Post added at 05:20 PM ---------- Previous post was at 04:20 PM ----------
**Bump**
Fixed it !!
I have followed the following steps - hope it helps you !
Download the following Stock ROM - P7500OXAKG7_P7500XXKG7_P7500XXKG7_bysamsdroid (Google it for the Hotfile link) I cannot post links yet
Start your Tab in Downloading mode (Power + Vol Down) then choose the Right Option
Extract downloaded ROM files to Desktop / Accessible Folder
In ODIN, choose PDA then select the files you just extracted
Flash the ROM file (mine took +/- 5mins for the 500+MB)
Start the Tablet in ROM Management mode (Power + Vol Down) then choose the Left option - The Interface should be a BLUE one if you've done it right
Install your selected ROM
Hold thumbs ;-)
Next ROM on my list is BINDROID - hold thumbs I dont break it
Thank for the help everyone, was able to recover my Tab and it is working perfectly now.
Well, which method worked
dymc84 said:
I rooted it through ODIN and it was the Overload CFW for HC 3.1
I was on HC 3.1 until I decided to upgrade to HC 3.2 and that's when it all went black. I still get the Samsung Galaxy Tab 10.1 logo, and was finally able to get it into download mode just now.
Any way I could revert back to stock?
Click to expand...
Click to collapse
how did you get it in download mode, after more tries with power + vol down?
Unable to get to bootloader
I've apparently done the same thing and am only getting a black screen. Unable to get to bootloader with Power+DnVol. After leaving plugged in for a while I do see the screen glow, but am still unable to power on. Odin did see the device in this glow state, but was unable to download CWM again.
Any ideas?
CuriousGT said:
I've apparently done the same thing and am only getting a black screen. Unable to get to bootloader with Power+DnVol. After leaving plugged in for a while I do see the screen glow, but am still unable to power on. Odin did see the device in this glow state, but was unable to download CWM again.
Any ideas?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1478361
This should help. Worked for me.
Thank you! I'll give it a try and report back.
Well, it looks like I have a bad USB cable as my tablet wasn't actually charging even though I'd left it plugged in over night.
Was able to finally boot into recovery to install the ROM, but forgot to copy the GAPPS.zip to the tablet and had a dickens of a time figuring out how to copy it after booting into ICS. Finally resorted to file copying over Bluetooth as I couldn't find how to turn on MTP.
Thanks for the link Misledz, I'll keep it closeby in case I ever do actually brick my tab.
CuriousGT said:
Well, it looks like I have a bad USB cable as my tablet wasn't actually charging even though I'd left it plugged in over night.
Was able to finally boot into recovery to install the ROM, but forgot to copy the GAPPS.zip to the tablet and had a dickens of a time figuring out how to copy it after booting into ICS. Finally resorted to file copying over Bluetooth as I couldn't find how to turn on MTP.
Thanks for the link Misledz, I'll keep it closeby in case I ever do actually brick my tab.
Click to expand...
Click to collapse
You're welcome Also the tablet by default doesn't charge via USB, there is a script you have to enable to allow it to do so, or 3.2 HC, Then again I don't think it's the cable being fault
Hi Guys,
has anyone been able to uninstall urukdroid 1.6 and revert to the original Archos firmware?
I've seen various suggestions from older versions... mainly around wiping file system.
... but no luck so far.
Sure I'm missing something obvious. Any ideas?
Cheers.
You want a way without system wipe? The options are:
1. if you have Stock firmware and Urukdroid - go to recovery menu and select "Developer edition menu" then select "Uninstall Developer Edition". This way you will have only Stock firmware left.
2. If you have only UrukDroid, unstall SDE and select "Update Firmware" upload the Stock firmware from Archos site and you're done.
3. Uninstall SDE (Special Developer Edition) and format the device to make sure its clean. Dont worry, after you format it the device will ask you to connect it to the PC and upload the firmware (you can find it in Archos site). Simply upload it and press the power button nothing can mess up. The installation will end and you will be back to Stock firmware like you wanted.
Thanks Mavasilisk, that's very helpful.
I worked out where I was going wrong. Was booting into urukdroid repair menu... not the Archos recovery menu. Doh!
In case any one else having same problem:
Archos Recovery Menu: Hold Vol + as soon as you reboot and screen goes black.
Urukdroid Repair Menu: Hold Vol + or - as soon as you seen urukdroid splash screen.
neil_black said:
Thanks Mavasilisk, that's very helpful.
I worked out where I was going wrong. Was booting into urukdroid repair menu... not the Archos recovery menu. Doh!
In case any one else having same problem:
Archos Recovery Menu: Hold Vol + as soon as you reboot and screen goes black.
Urukdroid Repair Menu: Hold Vol + or - as soon as you seen urukdroid splash screen.
Click to expand...
Click to collapse
I had it in mind but I guess'd if you have UrukDroid you couldnt make such a mistake lol
Hi experts,
I'm new and i need some help. I unlock t the boodloader of my Sony X10 mini sucessfully. Then i flash t the Kernel E10_2.6.32.60-nAa-05.ftf (Seams correctly with flash tool). Starting my device comes the kernel screan animation, then the screan is black for a moment and then is the same kernel logo and in fond is written CWM based recovery ... bud i cant get in to Clockworkmenu. I try t to hold volume- on start. But it dos not work.
I before used original Sony ROM and now i need a new Kernel and Rom to enable tethering on my X10 mini.
Can someone please help me?
Morscht said:
Hi experts,
I'm new and i need some help. I unlock t the boodloader of my Sony X10 mini sucessfully. Then i flash t the Kernel E10_2.6.32.60-nAa-05.ftf (Seams correctly with flash tool). Starting my device comes the kernel screan animation, then the screan is black for a moment and then is the same kernel logo and in fond is written CWM based recovery ... bud i cant get in to Clockworkmenu. I try t to hold volume- on start. But it dos not work.
I before used original Sony ROM and now i need a new Kernel and Rom to enable tethering on my X10 mini.
Can someone please help me?
Click to expand...
Click to collapse
What do you think CWM means?
And the way to get into it is repeatedly pressing the back-button, not the volume button.
I m new,but i read alot in this forum. Cwm is the clockworkmenu, of course. On my tablet it works fine, but on my smartphon i cant enter. I first tryt the back butto, but i cant acess the cwm. When exactly i have to press the back button? After starting the device i presst the button again and again, but i got no effect.
Morscht said:
I m new,but i read alot in this forum. Cwm is the clockworkmenu, of course. On my tablet it works fine, but on my smartphon i cant enter. I first tryt the back butto, but i cant acess the cwm. When exactly i have to press the back button? After starting the device i presst the button again and again, but i got no effect.
Click to expand...
Click to collapse
Flash the kernel again maybe.
Did you just get the words CWM based recovery, without any of the options underneath it?
It is a text-based menu, you need to navigate through it with the volume-buttons and select the items with the home-button. Use the back-button to get back to a previous menu.
Press the back-button repeatedly (about 3 times a second or so) as soon as the back-light comes on and keep doing that until CWM actually appears.
I flasht the kernel 3times, i also tryt an older version, same result. This evening i ll try again pressing the back button faster.
I read, that comming from an other custom kernel, you have to klear /system ... first. I come from the original Sony Rom, so it doesn t mether to me? The content of the sd card has no effect of the cernel!? I have not format it before.
Morscht said:
I flasht the kernel 3times, i also tryt an older version, same result. This evening i ll try again pressing the back button faster.
I read, that comming from an other custom kernel, you have to klear /system ... first. I come from the original Sony Rom, so it doesn t mether to me? The content of the sd card has no effect of the cernel!? I have not format it before.
Click to expand...
Click to collapse
Try a factory reset before you flash the kernel, don't know if you can get the original kernel back on? And no, the sd-card does not need to be formatted or anything like that, it does not stop the kernel from working.
First i reinstalled the original Sony ROM by Sony Update Service. Then i flash t again the 2.6.32.60-nAa Kernel, but no chance to get in to the CWM. Then i try t an other custom Kernel, and i get immediately access of the CWM. There i claret the System and the cache. Then i flash t again the 2.6.32.60-nAa Kernel and now i came in the CWM. From there i installed my brand new ROM and it looks very COOL :laugh:
Hi guys,
I've recently tried installing the Special Developers Edition firmware onto my Archos 101 G9 because I wanted to try out [email protected] and more importantly Ubuntu.
Only thing is that once I installed it and pressed the Vol. - button down, it would go to the Recovery Menu. But this time with the SDE menu option on it, but when I select it, it would just go to a black screen.
I know it's installed because the "SDE is now installed. Device will reboot" type screen came up the first time I selected it. Any ideas?
Thanks.
Jamie.
Button error
It volume up to start SDE...
-----------------------------------------------------------------------------------
Nexus S : 4.2.2 rooted Stock ROM
Archos 80G9 : Trying CM10.1 ...
Hi,
I tried to update my onda tablet v972 v1 from the ROM stock.
I would like to update my tablet with this custom rom : kasty-onda_v972_v1-422-v321_20130729-rooted1 from the thread of Christian Troy
I installed twrp but unfortunately, it seems there isn't the touch driver for onda v972.
I tried to restore with the older firmware my tablet holding the home button, then plug the tablet to my PC, then press 10 times the power button but at each time, twrp appears.
I can't use my tablet anymore.
Is it possible to do a kind of hard reset by a needle in the small hole and by pressing some button?
Is there an other way to restore the older firmware?
Thank you for your answer.
David