Related
i bought my new lg optimus one today i dont want try any custom rom right now just want to try any custom kernel for overclocking so can i flash kenel like franco kernel on my stock rom v2.2.2 v10d???
is it safe??
Yes man Go ahead, franco's kernal is the best.. no issues, as always do a nand backup in case anything goes wrong
one of the best kernel ,have u installed custom recovery ..
then flash the franco kernel v17-cfs version meant for froyo roms.
CtrlU said:
Yes man Go ahead, franco's kernal is the best.. no issues, as always do a nand backup in case anything goes wrong
Click to expand...
Click to collapse
so i have to wipe chache or wipe all for flashing kernel al my apps &gmaes will be deleted??
rchile said:
so i have to wipe chache or wipe all for flashing kernel al my apps &gmaes will be deleted??
Click to expand...
Click to collapse
Noooooooo, Just wipe dalvik cache and battery stats
CtrlU said:
Noooooooo, Just wipe dalvik cache and battery stats
Click to expand...
Click to collapse
i am using rom manager there is option of wipe dalvic cache how to wipe battery status
Yes there would be an option once you start to install the kernel
After flashing recovery with rommanger,You have to boot into recovery, There are options in the list for wiping cache and battery status.
CtrlU said:
After flashing recovery with rommanger,You have to boot into recovery, There are options in the list for wiping cache and battery status.
Click to expand...
Click to collapse
thanks guys flashed successfully first kernel on my phone now where can i find oveclock settings???
Wipe cache & dalvik cache from custom recovery and then flash kernel. That's all.
For battery stats:
- charge your phone
- when it's fully charged keep the charger plugged and boot into recovery
- with the charger still plugged wipe battery stats and reboot
- pull out your charger only after the system boots completly
To overclock install SetCPU (find it on the forum)
22VIN said:
Wipe cache & dalvik cache from custom recovery and then flash kernel. That's all.
For battery stats:
- charge your phone
- when it's fully charged keep the charger plugged and boot into recovery
- with the charger still plugged wipe battery stats and reboot
- pull out your charger only after the system boots completly
To overclock install SetCPU (find it on the forum)
Click to expand...
Click to collapse
i have not done wipe battery status but my phone still reboot successfully ater flashing so is it ok should wipe battery status now
rchile said:
thanks guys flashed successfully first kernel on my phone now where can i find oveclock settings???
Click to expand...
Click to collapse
Search for no frills in market and install it....
rchile said:
i have not done wipe battery status but my phone still reboot successfully ater flashing so is it ok should wipe battery status now
Click to expand...
Click to collapse
Charge your cell to 100% then clear battery stats ,that will give you more power i think ,or try battery calibrator ,it also does the same thing.
rchile said:
i have not done wipe battery status but my phone still reboot successfully ater flashing so is it ok should wipe battery status now
Click to expand...
Click to collapse
I tried wiping battery status before and after ROM install..never had any issues with that.
Battery stats have no influence whatsoever on phone crashes
Sent from my LG-P500 using XDA App
Just wipe the battery when 100%
its just a standard thing.. If you don't believe us.
Don't blame the dev and us for making your battery died faster.
Nimitmak said:
Search for no frills in market and install it....
Click to expand...
Click to collapse
no frils crashes my phone if i go above 800 so i have set to 729mhz with set cpu & its stable now
I have unlocked my bootloader properly.I am on prerooted stock kernel and WB v4.I am trying to install WBv5 custom kernel on it.After flashing my phone doesnt boots up.It gets stuck on bootscreen.Can any one guide me to the correct method to get it work?
Thanks
Try install wb stock kernel version.
Its work great here.
Custom kernel in unlocked BL still have deepsleep issue, thats why i advice you to flash doom advance stock and wolf stock version.
Sent from my X10i using XDA App
I have a similar problem. I think my phone is incompatible with DoomKernel. What I did was flash a different custom kernel and so far it's working okay.
Hi guys, I advice to restart all in zero.
http://forum.xda-developers.com/showthread.php?t=936733
1. Flash 2.3.3 with flashtool 3.0.0
http://forum.xda-developers.com/showthread.php?t=920746
2. Flash with downgrade kernel and start you phone then root after reboot remove battery.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_Downgrade_Generic.ftf
3. Flash with Upgrade kernel.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_UpGrade_Generic.ftf
4. Install xrecovery 0.3 choose 0.3GB
5.Install WB 0.5, factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache, reboot
http://forum.xda-developers.com/showthread.php?t=1192988
6.Flash Doomkernel (choose overclocked or not. Warning : Overclocked drain a lot battery).
Flash via recovery wifi modules(If you change rom, you must to flash wifi module after install your rom)
http://forum.xda-developers.com/showthread.php?p=17526480#post17526480
Factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache and battery stats.
Asgarth974 said:
Hi guys, I advice to restart all in zero.
http://forum.xda-developers.com/showthread.php?t=936733
1. Flash 2.3.3 with flashtool 3.0.0
http://forum.xda-developers.com/showthread.php?t=920746
2. Flash with downgrade kernel and start you phone then root after reboot remove battery.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_Downgrade_Generic.ftf
3. Flash with Upgrade kernel.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_UpGrade_Generic.ftf
4. Install xrecovery 0.3 choose 0.3GB
5.Install WB 0.5, factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache, reboot
http://forum.xda-developers.com/showthread.php?t=1192988
6.Flash Doomkernel (choose overclocked or not. Warning : Overclocked drain a lot battery).
Flash via recovery wifi modules(If you change rom, you must to flash wifi module after install your rom)
http://forum.xda-developers.com/showthread.php?p=17526480#post17526480
Factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache and battery stats.
Click to expand...
Click to collapse
If you have an unlocked bootloader, then you don't need azuzu's rooting method, just simply flash the doom kernel v5 through flashtool then install your favourite custom rom.
Sent from my X10i using XDA App
If i flash both of them , bootloop will occur and the reaction becomes slow
However , remix 1.4 hasn't this problem
who can tell me why ?
j47d8234554 said:
If i flash both of them , bootloop will occur and the reaction becomes slow
However , remix 1.4 hasn't this problem
who can tell me why ?
Click to expand...
Click to collapse
KERNEL not suit rom..
jje
How to update from v 1.0
this is my first post, so yeah im a noob, but just want to ask if i was on Resurrection ics v1.0, how could i update? do i just jump to the most recent update, or is there a certain update i have to flash first before moving on? ive tried to flash the v1.4 but then it would'nt boot, then i restored a backup, tried a couple times even from a fresh stock rom, but still it couldnt boot, what do you think the problem is?
sorry for all the questions
i was on resurrection now i dual boot 1.8 with siyah 3.1.2 with D4 rom( which is amazing btw) try 3.1.2 siyah and see if it works - im avoiding RC's and betas for kernel since the brickings, unless you want the features from rc5
@yugorisfriwan you don't need to install any update, go straight to the last version.
To install
1- full wipe & wipe cache
2- install rom
3- wipe dalvik
4- reboot (it takes time to boot the first time so be patient)
5- install another kernel (siyah of instance) otherwise you are done.
Now to my question
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
xXlordyXx said:
@yugorisfriwan you don't need to install any update, go straight to the last version.
To install
1- full wipe & wipe cache
2- install rom
3- wipe dalvik
4- reboot (it takes time to boot the first time so be patient)
5- install another kernel (siyah of instance) otherwise you are done.
Now to my question
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
Click to expand...
Click to collapse
Thanks mate!!
yugorisfriwan said:
Thanks mate!!
Click to expand...
Click to collapse
hey i am using this remix rom right from the ver 7.4 now on v1.8.1 what i sugesst u first is 2 install v1.7 then u upgrade it 2 the new v1.8.1 by simply flashing it over v1.7 without any wipes that way u wont have any issues in installation
PS: while installing 1.7 u do a full wipe
ie
wipe data/factory reset
wipe cache part
wipe dalvik cache
then install v1.7
then again wipe cache
wipe dalvik cache
Fix permissions
reboot 2 system
boot takes a while?
So how long do i have to wait for the phone to actually boot after updating? So ive flashed the updates, but when i select reboot now, it then comes to the Galaxy s ii i19100 splash screen. Now i have waited for at least 5 minutes, and nothing happened yet, so just restored my backup in fear of something going wrong am i too inpatient or is that just taking to long? how many minutes do i actually have to wait until its a sure flash fail? thx in advance!
5 minutes is too long, are you sure that you have done a full wipe before installing the rom and then wiped the dalvik cache after. The only time when my phone wouldn't boot was when I had forgotten to do the wipes.
anyway just redo the process and make sure you do everything (don't flash any kernels) and just leave the phone for few more minutes than last time. otherwise try to install another version (1.7 for instance) and see if it boots this time
installation problem
hi ,guys
sorry to post here,but i am having a annoying problem during the installation .
As,i am trying to install it is showing a build prop problem and showing some step7 and displaying msg as installation aborted.I did full wipe,wiped cache did data reset,wiped dalvik everything i did but this problem still annoys me.
rzrdelta said:
hi ,guys
sorry to post here,but i am having a annoying problem during the installation .
As,i am trying to install it is showing a build prop problem and showing some step7 and displaying msg as installation aborted.I did full wipe,wiped cache did data reset,wiped dalvik everything i did but this problem still annoys me.
Click to expand...
Click to collapse
hey which rom ur trying 2 install if its v1.7 of remix then first flash the cm9 kernel dwnld'ng the same from OP (original post in page 1 of remix ics thread) section after that reboot 2 cm9 recovery and then flash 1.7 it will be ok
5 minutes are too long mate. before flashing make sure that the current rom you are on has default CM9 kernel (for version 1-1.8)
After that follow the steps:
1.wipe data/factory reset
2.wipe cache partition
3.install main rom
4.go in advance and wipe dalvik cache and then fix permissions
5.wipe cache partition again and reboot
6.after ur first reboot u can then flash kernels,themes,and mods
enjoy
So... if im still on resurrection version 1.0, would installing the stock cm9 kernel work? .... then i could update?
So any workarounds on accessing the external sd on the computer?!!?
xXlordyXx said:
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
Click to expand...
Click to collapse
This seems to be a bug with the rom. I got the same problem on 1.4 and on 1.8.1. It will only mount the internal mass storage.
To work around this: Mount it with CWM. Works for me.
Hello
What is the easy way to come back from CM10.1 to CM9?
Is there a way to do it without full wipe/factory reset?
Thanks
wrong section
boot into recovery
wipe data n cache n dalvik
flash cm9 stable zip
reboot
enjoy extreme battery life
u can try without wiping bt i guess it will NEVER boot
Sent from my GT-I9100 using Tapatalk 2
doctor_droid said:
wrong section
boot into recovery
wipe data n cache n dalvik
flash cm9 stable zip
reboot
enjoy extreme battery life
u can try without wiping bt i guess it will NEVER boot
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
The battery life was insane with cm9, the only reason I use jellybean is because of Google now and to a lesser extent the new improvements in how it handles notification. I do not care for daydream and project butter
JUST FLASH STOCK FTF FILE USING FLASH TOOL... ROOT IT INSTALL CWM. FLASH CUSTOM KERNEL DO A FACTORY RESET. WIPE CACHE UNDER MOUNT FORMAT CACHE FIX PERMISION REBOOT UR CALL THRN GO IN CWM FORMAT THE CALL THE INSTALL UR FAV ROM. Bingo U FIXED THE BUG
Sent from my WT19i using XDA Premium 4 mobile app
shik.1 said:
JUST FLASH STOCK FTF FILE USING FLASH TOOL... ROOT IT INSTALL CWM. FLASH CUSTOM KERNEL DO A FACTORY RESET. WIPE CACHE UNDER MOUNT FORMAT CACHE FIX PERMISION REBOOT UR CALL THRN GO IN CWM FORMAT THE CALL THE INSTALL UR FAV ROM. Bingo U FIXED THE BUG
Sent from my WT19i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
how about to try calibrate battery first or wipe battery stats?
kermage said:
how about to try calibrate battery first or wipe battery stats?
Click to expand...
Click to collapse
wiping battery stats not works
shik.1 said:
wiping battery stats not works
Click to expand...
Click to collapse
well probably it's a kernel bug --unable to calibrate and stuck in previous state..
Sometimes there is an issue with the power meter and it does not reset properly. To reset the power meter, leave the device completely with out power (remove the battery and do not have it connected to a power source via the USB cable) for 10-15 minutes. Replace the battery and charge to 100%.
Best way to remove bug without full flashing is to first flash MESA kernel. Let the rom settle for 20min. Then turn off the phone for 5min. Then flash the desired kernel. The bug goes away... In XMP sk17i.
ONLY 2 KERNELS ARE AVAILABLE AT PRESENT WITHOUT 100% BATTERY BUG-
1. Mesa kernel
2. Kappa kernel 1.7 beta 12
Hope it helps
Dr. Joy Das said:
Best way to remove bug without full flashing is to first flash MESA kernel. Let the rom settle for 20min. Then turn off the phone for 5min. Then flash the desired kernel. The bug goes away... In XMP sk17i.
ONLY 2 KERNELS ARE AVAILABLE AT PRESENT WITHOUT 100% BATTERY BUG-
1. Mesa kernel
2. Kappa kernel 1.7 beta 12
Hope it helps
Click to expand...
Click to collapse
extanded stock kernel not hving 100% battery bug
shik.1 said:
extanded stock kernel not hving 100% battery bug
Click to expand...
Click to collapse
Sorry I never tried extended stock kernel. So I never knew it had bugs or not, MY MISTAKE
Lupus ,Radeon ,Mesa ,Doppler v2 and above , Kappa Beta 12 ,Kappa 1.3 dont have the bug.
Stock, Kappa 1.4-1.7.beta9 ,Rage, Kernel Panic have the bug .
karandpr said:
Lupus ,Radeon ,Mesa ,Doppler v2 and above , Kappa Beta 12 ,Kappa 1.3 dont have the bug.
Stock, Kappa 1.4-1.7.beta9 ,Rage, Kernel Panic have the bug .
Click to expand...
Click to collapse
i have 100 % battery bug in stock kernel
shik.1 said:
i have 100 % battery bug in stock kernel
Click to expand...
Click to collapse
Like in the OP
A)Reflash Stock Firmware
OR
B)Flash kernel which doesn't have battery bug .
It should cure your phone :fingers-crossed:
Flashing this kernel did the trick for me
http://forum.xda-developers.com/showthread.php?t=1694027
step to fix 100% battery
turn on phone until power off ..
aftar that power on your phone with charging..
turn off your phone...
after that turn on your phone without charging...
this should be fine after you following my step..
but i recomended flash stock FTF
I've tried many different kernels, and so far, LuPus kernel is my favorite.
its work in mango?
sorry, s newbie question
i have unlock bootloader of my se live with walkman. if i flashed back stock rom, do i need to unlock the bootloader back?