So Samsung released an update for this phone last night, and I very stupidly hit install and I was rooted.
Now the only thing it boots to is clockwork recovery.
I downloaded the latest stock rom but odin won't flash it.
Think I got to flash the stock recovery to flash the rom, how do I do this?
Also, how do I root this again after updating?
You don't need the stock recovery to flash the ROM. Odin should flash it. What problem is it giving you when you try to flash? Do you have the right odin package?
GazaIan said:
You don't need the stock recovery to flash the ROM. Odin should flash it. What problem is it giving you when you try to flash? Do you have the right odin package?
Click to expand...
Click to collapse
Odin package? Don you mean the taar.md5? It's S7500XXLH3_S7500BTULH1_S7500XXLH1_HOME.tar.md5
I'm trying to flash it with Odin 1.85 with it loaded as a PDA
Yep, the tar.md5. What happens when you try to flash it? do one of the boxes at the top say "FAIL" or does it just freeze?
GazaIan said:
Yep, the tar.md5. What happens when you try to flash it? do one of the boxes at the top say "FAIL" or does it just freeze?
Click to expand...
Click to collapse
Just freezes left it for 15 minutes.
Log below
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500XXLH3_S7500BTULH1_S7500XXLH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
droobey said:
Just freezes left it for 15 minutes.
Log below
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500XXLH3_S7500BTULH1_S7500XXLH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
Click to expand...
Click to collapse
Update: OK turns out recovery and download are two completely different things.
Recovery Mode: volume up+ volume down + home + power (what it was booting to by itself)
Download Mode: volume down + home + power
Everything is working now!
I've searched everywhere, I am not a noob when it comes to root/flashing/odin, but I am at a dead end here.
I picked up my phone today to see it at the Samsung i-9300 boot screen, just sitting there. I popped the battery and tried to reboot, no go. Tried to boot to recovery, won't go past that Samsung screen. I can boot to download mode, and odin recognizes the phone, but when I try to flash anything to the phone, odin freezes at SetupConnection.
Does anyone have any ideas?
Output from odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXDLJ4_I9300OXADLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
This is a stock firmware downloaded from SamMobile. I have tried just a twrp recovery to try to boot to recovery and that does not work either. I found a few .pit files and tried to re partition with those, hoping that would help, but no luck. Running windows 8, also tried windows 7 with no luck. Has anyone ever run into this?
Hi all. I was following the video to do the NC5 update. I loaded the zip on my ext sd, and the super su update. On my PC i have odin 3.09 and the tar files from the forum post. Everything was going fine until i got to ODIN.
I rebooted to download mode from safe strap as per directions. Connected USB, drivers found the phone and odin showed it connected. I choose the AP file and the CP file in the proper places, and choose start. The bar started on the phone, but has not moved past the first nub, and the odin window didnt update the box like it normally does with progress bars and activity... however the messages window at the bottom did update with this:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
So, it seems to be stalled here and im not sure what to do now. Its been like this for 15 minutes or so at least.
I have attached a screenshot of the odin window. Still no activity....
So what should i do now? Thanks for the help!
EDIT------------------------
To resolve this, i unplugged the USB, closed ODIN, pulled the battery let it sit for a while, hooked my usb into the computer (back USB port). Put battery in and booted to download mode by buttons (Vol DWN + HOME + Power). Re ran odin after the drivers settled up and ran the flash again and it proceeded properly. all appears to boot now.
Good night every one, i made a biig mistake . I tried to unlock the bootloader of my Galaxy S3 SCH-I535 with EZ-Unlock, then i shutted down the phone and after that the phone wont turn on. Can connect to Odin, but i cant flash anything is there any way to wake it up?
In Odin every time i try to flash something it stays like this:
<ID:0/021> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRALEC.bootchain.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/021> Odin v.3 engine (ID:21)..
<ID:0/021> File analysis..
<ID:0/021> SetupConnection.
Sorry about my english, hope that you guys get my point.
A Hello,
I´m from Portugal and i have a smartphone GT-I9300.
It´s with an official rom but, with the update of firmware to 4.3 he just go erronius and now just play logo and nothing more. In recovery mode, i can´t do nothing, (Wipe / factory, nothing...) in download mode, it craches with kies, kies3, odin 3.7 untill 3.11. I tryad adb but it says "error: closed". it´s not rooted. so, i think in move on to root and install cyanogenmod (I have that in my GT-I9505 withaout problems).
Can any person help me? i will post some photos.:.
@2000hdi: before flashing any custom-ROM, you need a working firmware. So go to sammobile.com and download your correct 4.3-firmware and corresponding Odin and Win-drivers. Deinstall all KIES, Odin, Samsung-things on your PC. Follow the short instructions from download-site exactly. Use USB-port on mainboard. If Odin still doesn't recognize your phone, change USB-cable.
USB ok
Hello again ,
My USB cable, port, its ok, he recognises in odin but during instalation craches. In kies, he download the firmware but during instalation, frozes on 0%.
How can i put some photos to demonstrate?
Forget KIES. Post the Odin-log (text).
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin engine v(ID:3.1101)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
A friend told me about a file: pit 512 from the days he have is I9300 with the same problem and to use a oldest odin version like 3.1... but, i dont now...
Your partitions seem to be gone. Try Repartition, for 4.3. If this doesn't work, your NAND is gone.
Link to 4.3 down. In the others files i flashed, i used to test the repartition button. In case of nand. What to do?
...to say goodbye
Still another German source. If you know the procedure, you'll find the download-files though.
Great...
@2000hdi: done?
rp158 said:
@2000hdi: done?
Click to expand...
Click to collapse
Nop, i will have to buy a new motherboarder...
after PC use
Hello again, the photos are the result of using a pc XP, instead of a portable because the USB ports on motherboard, original cable and Odin 3.12. Can anyone explain what is the problem now and possible fix? Thanks.
Oficial firmware from sammobile