Related
I wanna save battery by using 3G only but everytime i put it into CDMA PRL auto mode it just shuts off my internet... i live near dallas, any ideas?
Nikolai2.1 said:
I wanna save battery by using 3G only but everytime i put it into CDMA PRL auto mode it just shuts off my internet... i live near dallas, any ideas?
Click to expand...
Click to collapse
3g is evdo
Sent from my ADR6400L using XDA App
No if you put it in evdo mode you don't get phone calls. Plus I tried and no 3g
Sent from my ADR6400L using XDA Premium App
Nikolai2.1 said:
No if you put it in evdo mode you don't get phone calls. Plus I tried and no 3g
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
hmm well that's what I'm using right now and I just got a phone call.
Sent from my ADR6400L using XDA App
Nikolai2.1 said:
I wanna save battery by using 3G only but everytime i put it into CDMA PRL auto mode it just shuts off my internet... i live near dallas, any ideas?
Click to expand...
Click to collapse
Cdma prl auto works fine for me.
Sent from my ADR6400L using XDA App
Just to be perfectly clear, CDMA PRL Auto is the proper mode to switch to.
Sent from my ADR6400L using Tapatalk
jeffnucci said:
Just to be perfectly clear, CDMA PRL Auto is the proper mode to switch to.
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
That's what I'm saying. But mine just shuts off signal if LTE isn't on fo some reason
Sent from my ADR6400L using XDA Premium App
I get no internet on cdma auto either. Even after a reboot. Ping says network unreachable.
Sadface.
Dallas/Richardson area here, having the same problem. Data only working on 4G, nothing on evdo/1x.
Same here on two Thunderbolts in Los Angeles. I actually haven't seen 3G at all since Friday night. Called Verizon and apparently there is an issue with 3G provisioning. They claim they are working on it and that there will be a fix in the next day. I know others say they fixed it with a hard reset but I don't want to do that if I don't have to, especially if its just going to break again later...
xtermmin said:
Dallas/Richardson area here
Click to expand...
Click to collapse
same here plano/richardson
good i think that means the phone isnt broken!
/me tazers Verizon
Hey guys I had the same issue in Baltimore, MD area and for me I had to factory reset and the 3g is now working when using cdma auto and its been running for about an hour now
Sent from my ADR6400L using XDA App
Weird. Mine never had that problem.
Did a factory reset now (since I hardly customized my phone yet), and it seems to have fixed the 3G problem. Not only that, but now I have the updated market! (Before the reset, I had the old market)
Go to the market and download Restart Connections. If you lose mobile network after switching to the proper setting, run that app.
Edit: This will also get rid of the need to do a factory reset to regain data connection
xtermmin said:
Did a factory reset now , and it seems to have fixed the 3G problem.
Click to expand...
Click to collapse
ltbakken said:
Go to the market and download Restart Connections.
Click to expand...
Click to collapse
neither of these fix it for me. as far as i can tell there is no 3g for TB in dallas.
only 4g and wifi get internet access.
rizzomegav said:
neither of these fix it for me. as far as i can tell there is no 3g for TB in dallas.
only 4g and wifi get internet access.
Click to expand...
Click to collapse
it worked for me after a while. i turned it on outside my house and it worked, but for some reason my home wouldnt let me switch
Had a similar issue. Figured out that when I switch from LTE to CDMA (PRL) it will switch to 3g, it can take a while, however if I power off the phone it will not connect on reboot to 3g again have to switch back to LTE and go to 4g and then switch back again. Hope this helps
3g just started working and i did nothing (other than going without internet for hours until it started working).
im blaming Verizon and my local network.
Hey guys. I've had my EVO for a while and I've been flashing roms like a fiend, recently I've been stuck on 1x for a few days now. I switched to a stock based ROM and updated all my stuff. Called sprint and they reset my connection and its still on 1x. They want me to go into a store because they think its the phone. Any last minute ideas? Should I s-on or anything. Im also worried about them switching out the phones and me being able to root the new one.
Sent from my PG86100 using Tapatalk
in dialer dial ##DATA# click edit mode enter you msl click data profile then hit the settings(?) button on the bottom of phone click restore reboot phone let it do its thing see if that helps
And if you do end up bringing it in, normally a fresh flash of a completly stock ROM will work, as long as you don't have a custom splash screen they shouldn't notice s-off.
They would try to do an update which will include 1.5 bootloader.( I've seen someone who did this and ended up with 1.5 boot, with s-off as a result, but who knows what was done to it in the store)
Go with the instructions above my post, worth a shot..
Shot from my sharp shooter in 3d
cleanrom2.9.5
Tried restoring, no luck still on 1x. I don't want to be stuck on hboot 1.5 don't they not have s off yet?
Sent from my PG86100 using Tapatalk
have you called to see if a tower is down in your area or something
Bowdowntozoltan said:
Called sprint and they reset my connection and its still on 1x. They want me to go into a store because they think its the phone.
Click to expand...
Click to collapse
twiztidninja said:
have you called to see if a tower is down in your area or something
Click to expand...
Click to collapse
Pretty sure they would have checked that.
what prl are u useing?
I'm not sure. This nocturnal Rom won't tell me. It updated the prl when I restored though.
Sent from my PG86100 using Tapatalk
Had the same proplem i turned my gps off then profile update then prl then ##data# data restore after it reboots let it do the hands free activation then stop it when it does the prl update
Sent from my PG86100 using xda premium
Awesome that fixed it! Thanks!
Sent from my PG86100 using Tapatalk
Your welcome
Sent from my PG86100 using xda premium
I apologize as I'm certain this has been asked already. I just got my EVO LTE today. I'm using the Android xda app and I can't find any way to confine a search to a specific forum. When I type in my search, the app searches all forums at CDs!
When I'm away from a wifi signal, and I try to use any app that requires a data connection, I get a no data signal error.
I have tried switching to cdma only, but that does not work. When I check in settings, it also says, "no data connection".
So 1. What's up with that?
Bonus 2. Is there a way to search in the Android xda app and limit it to one forum?
Thanks.
Sent from my EVO using XDA
The answer to 2. Is no theres not. Would be nice though not sure about 1 though, have you tried updating your profile?
Sent from my EVO using xda premium
I've updated my profile and my prl.
Sent from my EVO using XDA
leebo said:
I've updated my profile and my prl.
Sent from my EVO using XDA
Click to expand...
Click to collapse
Have you called sprint? Stupid question but you have mobile data turned on right?
Sent from my EVO using xda premium
I have a co-worker who just got this phone 2 days ago with the same problem. He called the store, told him what was going on and they said bring it back and they gave him a new one. Well it didn't fix the problem. Now they are saying its cuz Sprint is still working on making things work on ICS.. they have also said its because the update hasn't come to make it a working 4G LTE phone yet.. my friend is a EVO fan and is trying to stick it out, he has a 14 day buyers remorse period which he can exchange it for a different phone which he might go to the SGS2 .. any info would be great. Thanks on advance
Sent from my SGH-T989 using Tapatalk 2
Yes, mobile data is on. That's where it says, "no data connection". If you long press, you have the option for cdma only.
I haven't yet called Sprint because I figured this issue must have been posted here and someone had a fix. Also had fear Sprint would not know what the problem was. After the above post, I guess I have a good reason!
Sent from my EVO using XDA
In the "mobile networks" settings try checking the "domestic data" option
Yep, domestic data is also on.
Sent from my EVO using XDA
Bummer...that fixed my wife's
Apparently,a reboot thus morning seems to have fixed it.
Computer 101 I guess!
Sent from my EVO using XDA
I had the same problem and used ##3282# to delete profile and couldn't get it to reconnect. Come to find it is was because i was connected to an airave. I went up the street and updated the profile again and it started working instantly. Haven't had any more problems since.
Same problems here - I kept going into roaming mode with full bars, then out of roaming and zero bars. Couldn't use any mobile data or make calls.
Kept having to update the PRL - like every hour or so. Eventually, updating the PRL stopped fixing the problem. Resetting the phone got the mobile connection working again but it still wigs out after awhile and updating the PRL isn't helping. Only resetting makes it work. Ugh.
I'm on wifi a lot and the wifi radio seems to work like a champ.
Updating the PRL and Profile and then rebooting the phone solved the problem for me.
i am headed to the sprint repair center at lunch for this issue. It will work great as long as I do not turn on the wifi..as soon as it connects to a wifi source it drop the mobile network like it should..but when the wifi goes away it will not reconnect to mobile network..it will say "turning on" then just go to disconnected...sucks. Hope they can either fix it or provide a new one.
ok since last night at 12 my data and my text and call stopped working,,even tried with 3 different roms,, hboot 1.12.2222 radio 1.12.11.0809 iv even flashed back my stock stock backup i did when i first got the phone,updated pri prl ect...i still get this
.when i go into settings under "about" i click on network "signal strength" it reads signal strength 0........mobile network type unknown.......service state ....out of service....i called sprint they say theres no restriction on my phone or account...and when i click on
"software information..firmware baseband ect...it says "pri version" "not ready" amd prl version...not ready.,,but when i installed my stock back up i have pri version 2.28-003 prl 25006 but still have no sevice......also on the notification bar above the service bars there is a x ...help whats the deal??
One time I couldnt receive or make any calls or text. I had to call sprint and they did something on their end. I was rooted and all and they did not detect it nor did they mention it.
Did u try to reactivate?
Sent from my EVO using xda premium
vader860 said:
One time I couldnt receive or make any calls or text. I had to call sprint and they did something on their end. I was rooted and all and they did not detect it nor did they mention it.
Did u try to reactivate?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
yup went thru that with sprint today ,,had to call using my wife's phone,,,they said that i would have to take it in to a sprint tech,,bahahaha!!! i even tried 3 diffrent times just to see if someone else had a trick....
Ruu for phone to restore back to default?
Sent from my EVO using xda premium
vader860 said:
Ruu for phone to restore back to default?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
yup
How about flashing the latest radio and firmware?
Sent from my EVO using xda premium
Did Sprint actually reprovision the phone from their end? I had a similar problem with my OG EVO, and that fixed it...
Sent from my EVO using xda premium
yotie said:
vader860 said:
Ruu for phone to restore back to default?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
yup
Click to expand...
Click to collapse
So you're saying you flashed the latest RUU and you still have an issue? If so, the problem must be hardware, not software. If you haven't done that, I would try that next, and then call Sprint and have them refresh your device. Or you can try to activate through Settings first.
Okay guys I have this problem with my Atrix 4G. It's usually on NottachTrix 2.0.0 or 1.9.0 since 2.3.0 was giving me weird errors. The problems I am having are that I have a strong signal of 4-5 bars and then either after an idle or just by watching it sometimes the signal degrades and eventually it's greyed out with a little x over it and it stays like that indefinitely. I've tried turning the wifi on and off, the GPS on and off, I've done a factory reset. I've repeatedly flashed the radios. 30, 36, 37, and the sbf of OLY_ATT_01.97.00R. I've done it with the sim in and out, with the sd in and out fixed permissions. " And I still have the issue of the signal either being completely off, or just degrading. I'm using this on T-Mobile but when I search for providers all it shows is AT&T and when I go to About Phone -> Status I consistently have between 90-120dBm under signal. What am I doing/not doing right?
Sakuryu said:
Okay guys I have this problem with my Atrix 4G. It's usually on NottachTrix 2.0.0 or 1.9.0 since 2.3.0 was giving me weird errors. The problems I am having are that I have a strong signal of 4-5 bars and then either after an idle or just by watching it sometimes the signal degrades and eventually it's greyed out with a little x over it and it stays like that indefinitely. I've tried turning the wifi on and off, the GPS on and off, I've done a factory reset. I've repeatedly flashed the radios. 30, 36, 37, and the sbf of OLY_ATT_01.97.00R. I've done it with the sim in and out, with the sd in and out fixed permissions. " And I still have the issue of the signal either being completely off, or just degrading. I'm using this on T-Mobile but when I search for providers all it shows is AT&T and when I go to About Phone -> Status I consistently have between 90-120dBm under signal. What am I doing/not doing right?
Click to expand...
Click to collapse
i'm not knowledgeable about this issue, but based off of what you said, you're using ATT radios on a T Mobile network. perhaps a T Mobile radio would work? if i'm wrong with this statement, then i am and i'll admit it, but thats what i would try.
Sent from my MB860 using xda app-developers app
Im not sure that's how it works since the radio wasn't designed for this phone. Oh and it was working before and kinda worms if I reboot the phone but it still degrades
Sakuryu said:
Im not sure that's how it works since the radio wasn't designed for this phone. Oh and it was working before and kinda worms if I reboot the phone but it still degrades
Click to expand...
Click to collapse
i'm not sure either, thats why i suggested trying it out. its still a fastboot flash radio radio.img kind of thing
Sent from my MB860 using xda app-developers app
palmbeach05 said:
i'm not sure either, thats why i suggested trying it out. its still a fastboot flash radio radio.img kind of thing
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
I always flash through CWM except for the 00R radio. And I just tried the other radios on the internet from the internationals to the UK to all US radios, still no luck at all. Is this a SIM issue or is my phone SOL?
Sakuryu said:
I always flash through CWM except for the 00R radio. And I just tried the other radios on the internet from the internationals to the UK to all US radios, still no luck at all. Is this a SIM issue or is my phone SOL?
Click to expand...
Click to collapse
i think i need to back track here and ask if you unlocked it so it is capable of running on different carriers. next would be did you set up the correct service settings like the vpn and stuff. and have you tried flashing, via fastboot or cwm, any t mobile radios?
Sent from my MB860 using xda app-developers app
palmbeach05 said:
i think i need to back track here and ask if you unlocked it so it is capable of running on different carriers. next would be did you set up the correct service settings like the vpn and stuff. and have you tried flashing, via fastboot or cwm, any t mobile radios?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Does this phone even have T-Mobile radios? I've flashed Via CWM, I am bootloader unlocked and SIM unlocked I have no clue what a VPN is but the APN comes with the phone I think.
Sakuryu said:
Does this phone even have T-Mobile radios? I've flashed Via CWM, I am bootloader unlocked and SIM unlocked I have no clue what a VPN is but the APN comes with the phone I think.
Click to expand...
Click to collapse
lol apn is what i meant, not vpn, my bad. but yes, do you have the T Mobile apn info set up so it should work? and this phone was never made available for T Mobile, so it doesn't have any T Mobile radios. you would have to look for T Mobile radios to do what i was talking about trying out
Sent from my MB860 using xda app-developers app
palmbeach05 said:
lol apn is what i meant, not vpn, my bad. but yes, do you have the T Mobile apn info set up so it should work? and this phone was never made available for T Mobile, so it doesn't have any T Mobile radios. you would have to look for T Mobile radios to do what i was talking about trying out
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
What T-Mobile radios do I look for? Isn't each radio made specifically for each phone? And When I catch signal it does work.
Sakuryu said:
What T-Mobile radios do I look for? Isn't each radio made specifically for each phone? And When I catch signal it does work.
Click to expand...
Click to collapse
ok its hardware issue. below is a paragraph about a different device that might point you in the right direction
"Did u follow the guide on XDA forums? They have the original guide for unlocking AWS bandwidth for ATT note 2 so that it could work on T-Mobile 4G.
If you flashed it correctly your phone should virtually pick up tmobile 4g any where you go.
Unless you live in a rural area that is."
it would be a hardware issue that should be able to be fixed using whatever was used in the case above. it may be about the note 2, but they did ask about other devices, so i would think it might work
Sent from my MB860 using xda app-developers app
From What I was reading, that method was for phones that have T-Mobile Variants that just have the 1700 Band blocked. Tmobile reps say it's probably a SIM issue which I'm hoping it is so I don't find out I have to buy a new atrix. But if its Software I'd love to be able to fix it now and get it over with.
Sakuryu said:
From What I was reading, that method was for phones that have T-Mobile Variants that just have the 1700 Band blocked. Tmobile reps say it's probably a SIM issue which I'm hoping it is so I don't find out I have to buy a new atrix. But if its Software I'd love to be able to fix it now and get it over with.
Click to expand...
Click to collapse
Okay it's working somewhat now that I found the 38P radio
Sakuryu said:
Okay it's working somewhat now that I found the 38P radio
Click to expand...
Click to collapse
I quite had somewhat similar problem but enabling 'use 2g only' I was able to avoid the loss of signal
Sent from my MB860 using xda app-developers app