Hi All,
I've got a Galaxy Nexus which looks like working till the standby screen kicks in and then it turns itself off. The phone is rooted.
Fastboot starts while I press the vol up+down+pwr buttons, but once I release them the phone turns off. The volume down+pwr buttons are doing the same effect. While turned on I can browse the whole system via file manager.
Once I connect to the USB cable (power or computer) it turns off.
The phone is i9250 running currently Android 4.2.2
I've tried to figure out some solution in the posts but I didn't find any relevant info. I need to reset the root access and reinstall the factory image.
THe other problem is when I connect the USB cable the phone turns itself off
I tried to download the OMAP flash file from Legija but the link doesn't work anywhere... If you have any info on that I would really appreciate
gabcix said:
Hi All,
I've got a Galaxy Nexus which looks like working till the standby screen kicks in and then it turns itself off. The phone is rooted.
Fastboot starts while I press the vol up+down+pwr buttons, but once I release them the phone turns off. The volume down+pwr buttons are doing the same effect. While turned on I can browse the whole system via file manager.
Once I connect to the USB cable (power or computer) it turns off.
The phone is i9250 running currently Android 4.2.2
I've tried to figure out some solution in the posts but I didn't find any relevant info. I need to reset the root access and reinstall the factory image.
THe other problem is when I connect the USB cable the phone turns itself off
I tried to download the OMAP flash file from Legija but the link doesn't work anywhere... If you have any info on that I would really appreciate
Click to expand...
Click to collapse
have you tried nexus root toolkit (find it on xda)
select the "Back to stock/unroot" option and "bootloop" it will flash your phone back to stock.
and wrong forum by the way
Jack Jake said:
have you tried nexus root toolkit (find it on xda)
select the "Back to stock/unroot" option and "bootloop" it will flash your phone back to stock.
and wrong forum by the way
Click to expand...
Click to collapse
Thanks for your reply.
When I plug in the USB the device turns off. I can't put it to download mode either.
I've just downloaded the OMAP flash files but at this stage I try to figure out how to use it. I've installed the nexus drivers but OMAP does not recognize my phone, so it looks like I stuck for a while.
BTW: I can access the root partition when the phone turned on(normal use), so if anyone knows what should I change or delete in order to enter the download mode I would appreciate it. Thx
gabcix said:
BTW: I can access the root partition when the phone turned on(normal use), so if anyone knows what should I change or delete in order to enter the download mode I would appreciate it. Thx
Click to expand...
Click to collapse
wait you can turn your phone on? or what do you mean by "I can access the root partition when the phone turned on(normal use)"?
Jack Jake said:
wait you can turn your phone on? or what do you mean by "I can access the root partition when the phone turned on(normal use)"?
Click to expand...
Click to collapse
Yes, I can turn the phone on to normal use however it turns itself off when it is plugged to USB or if it is going to standby.
Since it is rooted, with a file browser I can access the root partition. I can NOT connect USB and I can NOT put it download mode or fastboot mode because the phone turns off straight away. I even can make short phone calls from it.
So I'm just after some info on how to fix the USB connection and put the phone back to original state so I can send it to Samsung for repair
Is USB debugging turned on or off?
try turning it on (if its off) and off (if its on).
i am asuming that it only turns off when you connect your phone to you PC, not to a wall charger right?
Bricked means the device just doesn't work at all. This commonly happens (bricked) when there's a software update and it gets half updated. Therefore, the answer is no, its not bricked, but you do have a serious problem there.
Sent from my SPH-L710 using xda app-developers app
Konvey said:
Bricked means the device just doesn't work at all. This commonly happens (bricked) when there's a software update and it gets half updated. Therefore, the answer is no, its not bricked, but you do have a serious problem there.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
yes Konvey is correct. your gnexus is not bricked you just have a usb problem
Related
I've searched everywherem nothing worked, can some plz tell me how to put my vibrant in DL Mode so i can restore with odin3
Kennii said:
I've searched everywherem nothing worked, can some plz tell me how to put my vibrant in DL Mode so i can restore with odin3
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=749413
if that doesn't work...
From here.. http://forum.xda-developers.com/showthread.php?t=848737
1. Get into Download Mode (WITH THE PHONE PLUGGED IN) by following the steps below
*Turn off the phone until you get to the charging battery screen (keep in mind, your phone is currently PLUGGED IN)
*Press volume up and down, and power all at once.
*As soon as the screen turns black, release your power button.
2. Unplug phone from USB
3. Open Odin (in Administrator if you're running W7 or Vista), try one of the ones I attached to this post, at least one of them is bound to work, some don't work for me, but works for others, some doesn't work for others, but works for me, whatever floats your boat
4. Load in the files into Odin that you have downloaded from above Just load in the files corresponding to the text field.
DO NOT CHECK REPARTITION.
5. Plug in your phone with the DL mode
6. Click start and wait for the magic
i can get into recovery mode but not dl mode, an my pc never recognized my phone via usb even when android worked
Kennii said:
i can get into recovery mode but not dl mode, an my pc never recognized my pc via usb even when android worked
Click to expand...
Click to collapse
Try my how-to...
Also, try pulling the battery, and then holding the Vol up+Vol dn keys, plug the usb cable in, then plug the battery back in..., make sure the usb cable is plugged into your computer...
Or.., if your phone is partially booting, then:
Code:
adb reboot download
i cant "power off" phone cause i cant boot android
Kennii said:
i cant "power off" phone cause i cant boot android
Click to expand...
Click to collapse
10 seconds: hold power...
When the phone reboots to the Vibrant screen...
Press and hold: Vol up+Vol Dn+Power....
Wait for the Vibrant screen to reboot again...
Release Power... Download mode...
* Unfortunately, sounds like you've never setup adb or the sdk. I would recommed this...
i think i have a hardware locked phone, i just got it today.
But i can get into recovery mode via hardware, so maybe i dont have hardware locked? and it IS possible to get to download mode on my phone via the buttons right?
Kennii said:
i think i have a hardware locked phone, i just got it today.
But i can get into recovery mode via hardware, so maybe i dont have hardware locked? and it IS possible to get to download mode on my phone via the buttons right?
Click to expand...
Click to collapse
Try here too, if that doesn't work for you...don't know what to tell you other than keep trying, you'll get in...
dasunsrule32 said:
10 seconds: hold power...
When the phone reboots to the Vibrant screen...
Press and hold: Vol up+Vol Dn+Power....
Wait for the Vibrant screen to reboot again...
Release Power... Download mode...
* Unfortunately, sounds like you've never setup adb or the sdk. I would recommed this...
Click to expand...
Click to collapse
when i did this i got recovery mode i'll try again.
where can i install this "adb" or "sdk" which ever ones easier?
Kennii said:
when i did this i got recovery mode i'll try again.
where can i install this "adb" or "sdk" which ever ones easier?
Click to expand...
Click to collapse
http://developer.android.com/sdk/index.html
1. Turn off device
2. Remove battery
3. Hold Vol up and Vol down (works best upside down)
4. Insert battery into device
5. Plug USB cable into device (also plugged into your computer)
Voila, Should enter download mode. Good luck!
and then what?
don't i need the pc to recognize my phone for this to work? and how would i do that if im stuck on the vibrant screen?
cvibe88 said:
1. Turn off device
2. Remove battery
3. Hold Vol up and Vol down (works best upside down)
4. Insert battery into device
5. Plug USB cable into device (also plugged into your computer)
Voila, Should enter download mode. Good luck!
Click to expand...
Click to collapse
when i do that the vibrant screen comes up and stays there
Kennii said:
and then what?
don't i need the pc to recognize my phone for this to work? and how would i do that if im stuck on the vibrant screen?
Click to expand...
Click to collapse
If you follow the steps your phone will enter download mode, In order for your PC to recognize what kind of device is plugged into it you need the samsung drivers. Which are here http://forum.xda-developers.com/showthread.php?t=728929
But im stuck on vibrant screen no OS is loaded
Kennii said:
But im stuck on vibrant screen no OS is loaded
Click to expand...
Click to collapse
Right, it sounds like you had a bad flash and your phone is stuck during boot
cvibe88 said:
Right, it sounds like you had a bad flash and your phone is stuck during boot
Click to expand...
Click to collapse
yes, so is that fixable?
Yeah definitely fixable, You just need to install the Samsung drivers onto your PC. Use Odin to flash a stock ROM onto your device and things should be better for you. I would suggest doing some research here on XDAand getting familiar with flashing a phone. Ive recovered from where you are now(a long time ago) this phone is very resilient. I have a thread over in the Q&A section with links to a video tutorial that I made for flashing a phone from stock, rooting, then all the way up to nero. Do a search on it, Good luck!
i just need to get into need to get into download mode and get odin to recongnize my phone and i should be good, it's such a pain! ;(. But THANKS for your help! I wish theres just ONE way to get into download mode.
So I already posted in both threads similar to mine I'm posting now, but those problems seem to be different from the problem I'm having.
So everyone says to do the emergency "power on with volume up held down"
But mine never powers off. The Boot loop goes from the boot loop sequence, and if I force it off it goes to "Entering Upload Mode: Cause Unknown". Forcing that off it immediately boots into the boot loop. So I can never shut it off, so I can never enter the emergency "hard reset" mode, because the device never shuts off. Eventually the battery dies, but the hard reset doesn't worth then either.
Does anyone know how to use the upload mode? The link to a samsung driver in the other thread is now a broken link. And once I'm able to write data to the device, where do I get the right set of android hard reset files?
I have no data on the device I need.
I have a very similar situation. Since yesterday my tab got caught in a boot loop. Didn't made any changes, just went into it. And the only way to turn it off is to force it to go to download mode and turn it off down by holding power button from there. I have rooted it a long time ago. I can't get into recovery mode by holding power+up. All I can get it the download mode that first says "waiting for usb cable" and if I connect it to the PC it goes to "press the [START] of Odin3". Do I need to try the fastboot method and reset it to factory details? I've being trying to do that but no devices were listed... Or do I need to reflash something with oding again? Please, just give me a tip.
Does anyone know how to use "upload mode" ?
Clyde_Frog said:
Does anyone know how to use "upload mode" ?
Click to expand...
Click to collapse
what the heck is upload mode?
i know what download mode is but what is upload mode?
can you get into download mode?
pwr + button next to it...hold until a menu pops up.
if you can then just flash a odin rom from there...get it from here or sammobile.com
hi
i have similar situation. i have a boot loop also. i can get into download mode. but then i can't get into odin3 download mode. it's stuck on waiting usb cable.
i just want to flash stock rom. i'v tried flashing a custom rom. but something went wrong and now i have this problem. hope somebody can help me.
If you're using a windows machine reinstall the drivers and see if that helps get past the problem. If you need links I have to get on my PC an copy and paste from there. Keep us updated. I've been there done that I think. So I hope I can help.
Sent from my GT-P7510 using one stinky finger.
Benzoman,
it worked! Tnx! i did what u suggested. i removed the samsung drivers and reinstalled them. now odin recognized my tab.
Glad I could be of help and you fixed the problem
by the way, there is a thanks button you could use.
Sent from my GT-P7510 using one stinky finger.
sorry, my bad! how about now? tnx
No problem. Now you got one to.
Sent from my GT-P7510 using one stinky finger.
Benzoman said:
If you're using a windows machine reinstall the drivers and see if that helps get past the problem.
Click to expand...
Click to collapse
What drivers? I've never installed any drivers of any kind, nor does my manual mention the need for drivers?
What is Odin, and why have I never heard of it? Why can't I find a download link for Odin?
Also, why can't I find any information about Odin?
This is the best I can find, but it appears to not be the maker.... http://www.rootingdroid.com/246/flash-your-samsung-with-odin-download-odin/
The instructions on that page:
" Using your data cable, connect your Android device to your computer. Turn off your mobile device for 30 seconds then power it up by pressing and holding HOME, POWER and VOLUME DOWN buttons until you will be prompted that you have entered in download mode."
I finally got into download mode! I had to connect the USB cable to the device. However, the copy of Odin3 I found is just a giant box with blank text fields. I have no idea what I'm doing with it. It did not auto detect my device, and I have no idea what firmware version I currently am using because I can't get the device to boot.
My samsung vibrant running 4.0.4 ICS zenwich 1.8.4 randomly shut off today, not even able to turn on, it was the Sleep of Death I have got before, so i pulled battery and reboot, still nothing.
The phone now boots, but their is no display
The phone will literally turn on, have the 4 buttons light up on the bottom, have the screen be responsive to touches, but the physical display is off
I can unlock my phone by swiping, hear the volume up sound, even dial calls by blind touching. It is the same idea as a PC that is plugged in, just so VGA cable to the monitor.
I have tried rebooting to recovery, download mode and tried to heimdall, but it never finds my device, i tried to sdk in and reboot to download mode via cmd prompt but no luck finding device too
I am all out of ideas and nothing is seems to be working
Any advice on resolving this issue would be appreciated
wafflebroski said:
My samsung vibrant running 4.0.4 ICS zenwich 1.8.4 randomly shut off today, not even able to turn on, it was the Sleep of Death I have got before, so i pulled battery and reboot, still nothing.
The phone now boots, but their is no display
The phone will literally turn on, have the 4 buttons light up on the bottom, have the screen be responsive to touches, but the physical display is off
I can unlock my phone by swiping, hear the volume up sound, even dial calls by blind touching. It is the same idea as a PC that is plugged in, just so VGA cable to the monitor.
I have tried rebooting to recovery, download mode and tried to heimdall, but it never finds my device, i tried to sdk in and reboot to download mode via cmd prompt but no luck finding device too
I am all out of ideas and nothing is seems to be working
Any advice on resolving this issue would be appreciated
Click to expand...
Click to collapse
Device Manager show anything is plugged in?
FaultException said:
Device Manager show anything is plugged in?
Click to expand...
Click to collapse
Yes, It shows up as the linusb winusb t-959 but neither heimdall or android sdk find the device.
wafflebroski said:
Yes, It shows up as the linusb winusb t-959 but neither heimdall or android sdk find the device.
Click to expand...
Click to collapse
So were you able to get into Download Mode at all? And if so was the display on then?
FaultException said:
So were you able to get into Download Mode at all? And if so was the display on then?
Click to expand...
Click to collapse
i think it did because it wasnt at a lock screen, and when i touched the soft buttons they would light up, but the phone wasnt in an OS.
the screen was still off though, I can't get anything to make it turn on
wafflebroski said:
i think it did because it wasnt at a lock screen, and when i touched the soft buttons they would light up, but the phone wasnt in an OS.
the screen was still off though, I can't get anything to make it turn on
Click to expand...
Click to collapse
What method did you use to get into Download Mode?
FaultException said:
What method did you use to get into Download Mode?
Click to expand...
Click to collapse
take battery out, hold vol + and - and power button, put battery in while usb connected
wafflebroski said:
take battery out, hold vol + and - and power button, put battery in while usb connected
Click to expand...
Click to collapse
You may've gotten into recovery, I can't really get into download mode like that. Try this:
Unplug USB & remove battery
Insert battery but do not power on.
Hold VOL-UP + VOL-DOWN
Insert USB and wait a few seconds, while still holding them
FaultException said:
You may've gotten into recovery, I can't really get into download mode like that. Try this:
Unplug USB & remove battery
Insert battery but do not power on.
Hold VOL-UP + VOL-DOWN
Insert USB and wait a few seconds, while still holding them
Click to expand...
Click to collapse
Ok that works, I'm defineatly in download mode, the device shows up in ODIN, but not heimdall. I am not familiar with ODIN, how would I go about flashing the ICS zen rom? I found a tutorial to flash back to stock ROM and wipe all data, but I would like to be able to just reflash the ICS rom
wafflebroski said:
Ok that works, I'm defineatly in download mode, the device shows up in ODIN, but not heimdall. I am not familiar with ODIN, how would I go about flashing the ICS zen rom? I found a tutorial to flash back to stock ROM and wipe all data, but I would like to be able to just reflash the ICS rom
Click to expand...
Click to collapse
Ok, so it shows the download mode on the screen of the phone?
If so, that's good news and means your screen is not shot.
Try to get Heimdall to work. Are you in windows? Then you'll need to uninstall the samsung drivers and do this (from CM update guide):
CM update guide said:
1. Run the included zadig.exe in the drivers folder of the Heimdall Suite.
2. From the menu, choose Options ยป List All Devices.
3. From the drop down, select Samsung USB Composite Device or Gadget Serial.
4. Click Install Driver.
NOTE: A prompt may appear warning that the installer is unable to verify the publisher of the driver. Ignore it and select "Install this driver anyway."
5. Heimdall can now be used safely on the Windows computer.
Click to expand...
Click to collapse
Once heimdall is running, try grabbing the boot.img out of the zen zip and do this:
Code:
heimdall flash --kernel boot.img
See if anything comes of that.
The screen never turned on.. it just went into download mode and i was able to see from ODIN that it was recognized. So i ODIN'd back to stock rom, i heard the phone reboot, but still no display.
Like before the phone's screen is 100% responsive, i can unlock the phone, hear the usb plugging in noise, just no display. It just blows my mind because the screen works but its not on.. I am very confused
wafflebroski said:
The screen never turned on.. it just went into download mode and i was able to see from ODIN that it was recognized. So i ODIN'd back to stock rom, i heard the phone reboot, but still no display.
Like before the phone's screen is 100% responsive, i can unlock the phone, hear the usb plugging in noise, just no display. It just blows my mind because the screen works but its not on.. I am very confused
Click to expand...
Click to collapse
That's not good. Your phone might be done for then. I once repartitioned with no partition files and still download mode worked on a fresh battery pull.
Maybe try leaving the battery out for a while and see if it fixes itself, since it seems to be an electronics problem, maybe something needs time to reset or something.
Sent from my SGH-T959 using xda premium
Yea I've had the battery out for over 30 mins and nothing. I even opened up my phone last night to check all the ribbon wires and connections, everything looked fine and i removed the motherboard & replugged everything in.. still no luck
it's a good thing my contract is up I think I am going to get the samsung galaxy s 3..
RIP vibrant best phone i ever had, I'm surprised it lasted this long with all the mods I had done to it haha
my xt890 lcd screen and digitizer were broken so i changed them and the phone was working fine for a week, i then wanted to update to kitkat through oem update; everytime i tried it would give me error . i then read that since i unlocked bootloader and rooted my phone and installed cwm recovery i couldnt do an oem update and i had to do a factory reset in order to update through oem, so i did just that ; after the phone finished factory reset and booted i proceeded with oem update while the phone was charging, everything was going fine the file was downloading, i went to the bathroom and came back the display was black, but touch screen was working fine...through more searching i read that this could be from the update, and i should do another reset... since i couldnt see anything even recovery menu. i downloaded moborobo so i can see my screen on pc and proceeded to factory reset ... now i cant even see through moborobo and im stuck. i think im stuck in recovery screen, but no way to be sure , hence i cant get usb debug.Please help.
hi all,
My international s3 cannot turn on, Charge, recovery or download mode and connect to pc. i flashed Omega v33.2 before and been using it for a while. so far ok. but after i woke up. want to unlock my phone. it wont turn on. i try to reboot the phone by holding the power button. after that, the LED notification turn off and the phone issue started. it wont turn on, cannot go to download or recovery mode, charge or connect to PC. i dont know what is the issue. Can anyone help me? i dont think i flashed the wrong rom as i been doing this for quite some time since my HTC hero.
boulala said:
hi all,
My international s3 cannot turn on, Charge, recovery or download mode and connect to pc. i flashed Omega v33.2 before and been using it for a while. so far ok. but after i woke up. want to unlock my phone. it wont turn on. i try to reboot the phone by holding the power button. after that, the LED notification turn off and the phone issue started. it wont turn on, cannot go to download or recovery mode, charge or connect to PC. i dont know what is the issue. Can anyone help me? i dont think i flashed the wrong rom as i been doing this for quite some time since my HTC hero.
Click to expand...
Click to collapse
As you have no warranty its worth trying USB recovery Jig to enter download mode before a paid for repair .
jje
Sorry to hear that mate.
Welcome to the club. I think it's about time we got some answers from Samsung.
http://forum.xda-developers.com/showthread.php?t=1993044
will try USB jig when i get one. been using GS2. never had this kind of issue. any other solutions. is my phone brick?
I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
[UPDATE] 2/22/2013 11:00pm gmt
I'm able to boot it only if I have it plugged in. I can only use Power + Volume controllers + Reset buttons. I can enter Recovery Mode but I cannot confirm/click on any selection.
Tablet does not get recognized by the computer in "Flashing Mode".
I forced to install the driver for the "Flashing mode" when the tablet is in recovery mode but programs like MSIFlashtool, RKBatchTool, RKAdnroid. (not sure if i correcly used the last 2... but whatever)
spilot said:
I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
Click to expand...
Click to collapse
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Jack Jake said:
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Click to expand...
Click to collapse
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Sent from my ARCHOS 80G9 using Tapatalk HD
Quinny899 said:
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Click to expand...
Click to collapse
ADB doesn't recognize it. I tried holding Power + Reset button and did 'adb devices' on Ubuntu and it didn't show anything. On Windows, if I held these 2 buttons, it would show an unknown device in Device Manager. (Mind you, I don't have the Android SDK on Windows, just Linux.)
I can't access any recovery/download mode. Any combination of buttons (Power+VolDown, Power+VolUp/VolDown, Power+VolUP, Power+Home, Power+Back, Power+Settings) would do nothing.
-----------------------------------------------------------------------------------------------------
This what it does when I press Power + Reset Button with a needle. It boots up, splash screen, and stays on black screen (Btw, in this stage, it's Unknown Device in Windows Manager).Once I let go of Reset or Power button, it shuts down.
Turning it on without holding Reset, it would show splash screen, black screen and turns off in about 2 seconds.
Bump.
I've tried playing with it for some time. I can't get it to stay working without pressing power+reset buttons, it always shuts off...
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Sent from my Enjoy 10 Plus using xda app-developers app
mramzi said:
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Click to expand...
Click to collapse
... I was trying all the time to get it work on the PC without plugging the charger. Anyways~
(Tablet's turned off), I plugged charger, I plugged USB, I turned on the tablet and viola it actually worked and booted into OS. However, no buttons work AT ALL, and touch input doesn't work as well.
I tried to get into Recovery Mode and it worked, but I can go up/down using VolUp/VolDow buttons but I cannot click on any thing because the home button don't work nor any other.
Only Power + VolUp + VolDown + Reset buttons work... What to do now?
TL;DR I want to click on 'Update from SD Card' from the Android Recovery but I couldn't get the 'home' button to click enter on the selection. So what's the solution?
bump.
updates:
I tried to place the firmware from the official website as update.img on an SD Card and placed it in the tablet and went into the recovery mode and selected the 'update from sd card' but i couldn't click it. I tried to tap power, home, search, settings and back and nothing worked.
what I've got up until now:
I can boot into the ROM / RecoveryMod as long as I have the charger plugged in the tablet.
For Ubuntu, when I use the command $ tail -f /var/log/syslog and plug in my tablet, it shows this log http://pastebin.com/pBpBUA2Q (it identifies the tablet) [note, the tablet is booted into the ROM]
Also, if I'm in the recovery mode and I plug in the tablet, it would enumerate the USB... ~,~
Bump
bump
spilot said:
bump
Click to expand...
Click to collapse
Please don't bump your thread more than once in 24 hours, it's against the rules
Sent from my Galaxy Nexus using Tapatalk HD
bump
Hello,
I know it has been long since this thread stopped.
I'm currently in his shoes and for the life of me cannot find anything on the web to help me solve my problem.
My MSI Enjoy 10" Plus was flashed with the wrong MSI Enjoy 10" update. Now the tablet only turns on when in "Recovery Mode", but selecting in that mode is not possible using 10" Plus' buttons. Is there anyone from you good people that can help? Please? Thanks.
Uhm...bump?
Bump? Need help from the experts here. Please. I'm desperate.
Thank you very much in advance.