I flashed the JediXV11 ROM and now I don't have any GPS connectivity.
Does anyone know how to fix this?
Baseband version I605VRALL4
Kernel
3.0.64 SaberKernel_15.2+
[email protected] #1
Hardware Version I605.06
Thanks
falkon114 said:
I flashed the JediXV11 ROM and now I don't have any GPS connectivity.
Does anyone know how to fix this?
Baseband version I605VRALL4
Kernel
3.0.64 SaberKernel_15.2+
[email protected] #1
Hardware Version I605.06
Thanks
Click to expand...
Click to collapse
If you read the thread there are a couple fixes suggested.
Sent from my SCH-I605 using Tapatalk 2
Related
My details:-
Phone GT-I9100
Android 4.0.4
BB I9100DXLP9
Kernel [email protected]#1
Build No 4.2
Mod Slim ics
Want to try out Jkay-- *#1234# not working.
Kernel is Fluxi.
My noob question - what is my pda (i mean like xwkf3/xwlp9/xwlpf)?:fingers-crossed:
Thanks..
nickxxxx said:
My details:-
Phone GT-I9100
Android 4.0.4
BB I9100DXLP9
Kernel [email protected]#1
Build No 4.2
Mod Slim ics
Want to try out Jkay-- *#1234# not working.
Kernel is Fluxi.
My noob question - what is my pda (i mean like xwkf3/xwlp9/xwlpf)?:fingers-crossed:
Thanks..
Click to expand...
Click to collapse
*#1234# does not work ?!
Ok, usually the PDA is the same as the Build version/number => DXLP9.
Maybe you have to reflash the kernel or the whole ROM to get the *#1234# work again on your phone.
Dial codes will only work only stock Samsung ROM's. With it being “build 4.2," I'll assume it isn't a stock Samsung ROM. Flash one if you wish to use these dial codes.
Sent from my GT-I9100 using Tapatalk 2
nickxxxx said:
My details:-
Phone GT-I9100
Android 4.0.4
BB I9100DXLP9
Kernel [email protected]#1
Build No 4.2
Mod Slim ics
Want to try out Jkay-- *#1234# not working.
Kernel is Fluxi.
My noob question - what is my pda (i mean like xwkf3/xwlp9/xwlpf)?:fingers-crossed:
Thanks..
Click to expand...
Click to collapse
deleted
Sun90 said:
well ur PDA is DXLP9 same as ur baseband
u mean u want to try the jkay framewrk mod, if so u have to dwnld the one made for DXLP9 and flash the same and not any other build one
Click to expand...
Click to collapse
This is not accurate, sorry. PDA version is the build number of a stock Samsung firmware. Not baseband. Baseband is the same as phone/modem.
nickxxxx;is749702 said:
My details:-
Phone GT-I9100
Android 4.0.4
BB I910DXLP9
Kernel [email protected]#1
Build No 4.2
Mod Slim ics
Want to try out Jkay-- *#1234# not working.
Kernel is Fluxi.
My noob question - what is my pda (i mean like xwkf3/xwlp9/xwlpf)?:fingers-crossed:
Thanks..
Click to expand...
Click to collapse
You're running Slim ICS; which is NOT a Samsung stock firmware. So technically, you don't actually have a PDA version.
Anyone else this this looks unusual?
Android Version: 4.0.3
Baseband Version: I9100XXKI3
Build Number: XWLPG V5.1.2
Click to expand...
Click to collapse
SwannyBhoy said:
Anyone else this this looks unusual?
Click to expand...
Click to collapse
Not really. Looks like a Gingerbread modem was flashed to an ICS firmware. That is only unusual in that it would never come like that packaged from Samsung. But it still should work just fine. Modems are cross compatible between Gingerbread and ICS.
ctomgee said:
This is not accurate, sorry. PDA version is the build number of a stock Samsung firmware. Not baseband. Baseband is the same as phone/modem.
.
Click to expand...
Click to collapse
well thank u for correcting me ma8
edited my post for the same
ctomgee said:
This is not accurate, sorry. PDA version is the build number of a stock Samsung firmware. Not baseband. Baseband is the same as phone/modem.
You're running Slim ICS; which is NOT a Samsung stock firmware. So technically, you don't actually have a PDA version.
Click to expand...
Click to collapse
Okay... got it.. also Jkay works with stock roms or custom roms which have support for it and i dont think that slim ics support it as of yet.
Thanks.
Hi Friends,
My Samsung Galaxy S2 (I9100G) has a strange network issue. My phone suddenly becomes unreachable and network does not reconnect automatically but it shows full signal bars on the display. I have to restart the phone then only it works. It happens many time in a day.
My phone has offical 2.3.6 without any customization done on it. I installed ICS also but facing same issue.
Model: I9100G
Android Version: 2.3.6
Baseband version: I9100GDDKI1
Kernel version: 2.6.35.7 [email protected] #2
Build Number: GINGERBREAD.XWKJ2
Please let me know fix for this issue.
Thanks
Try changing modem version.
Sent from my GT-I9100 using xda app-developers app
I'm having the exact same issue. How do you change the modem version?
By flashing modem file as phone in Odin or by CWM.
For CWM: http://veyka.co.uk/radios
Try GetRIL from Google Play, this should fix your problems.
Baseband and Modem version do not match, thats why your having this problem.
gigg0 said:
Try GetRIL from Google Play, this should fix your problems.
Baseband and Modem version do not match, thats why your having this problem.
Click to expand...
Click to collapse
I am experiencing the same issue, however, according to GetRIL both my baseband and modem are matching. What shall I do next?
josefarrugia said:
I am experiencing the same issue, however, according to GetRIL both my baseband and modem are matching. What shall I do next?
Click to expand...
Click to collapse
y have the same problems,how did you fixed???
grafyy said:
y have the same problems,how did you fixed???
Click to expand...
Click to collapse
Looks like it was an issue with my signal in my room. Low signal.
josefarrugia said:
Looks like it was an issue with my signal in my room. Low signal.
Click to expand...
Click to collapse
i didint have proablems before with SII I9100 ..
Hi, recently I just flashed liquidsmooth rc2 4.2.2 rom. The data network seems to be always 'asleep', I do not receives notifications for whatsapp and facebook. Unless, I surf the net using browser or stream some youtube videos. I saw many posts about flashing a radio after a custom rom, so do I need to flash a radio? (there is no fm radio app after i flashed the rom and gapps)
Model: Samsung Galaxy SIII GT-I9300
Custom Rom: LiquidSmooth v2.1-RC2
Android version: 4.2.2
Baseband version: I9300DXELK1
GotFired said:
Hi, recently I just flashed liquidsmooth rc2 4.2.2 rom. The data network seems to be always 'asleep', I do not receives notifications for whatsapp and facebook. Unless, I surf the net using browser or stream some youtube videos. I saw many posts about flashing a radio after a custom rom, so do I need to flash a radio? (there is no fm radio app after i flashed the rom and gapps)
Model: Samsung Galaxy SIII GT-I9300
Custom Rom: LiquidSmooth v2.1-RC2
Android version: 4.2.2
Baseband version: I9300DXELK1
Click to expand...
Click to collapse
Radio in this case means modem (baseband)
You have a baseband but it might be incompatible, ......it's the baseband you are showing the one you had before the flash?
Also check your apn settings, you might need to get them from your carrier
slaphead20 said:
Radio in this case means modem (baseband)
You have a baseband but it might be incompatible, ......it's the baseband you are showing the one you had before the flash?
Also check your apn settings, you might need to get them from your carrier
Click to expand...
Click to collapse
The baseband is after the flash.
I checked the apn settings, nothing seems wrong.
GotFired said:
The baseband is after the flash.
I checked the apn settings, nothing seems wrong.
Click to expand...
Click to collapse
What baseband did you have before? Might be worth reflashing modem+ ril
slaphead20 said:
What baseband did you have before? Might be worth reflashing modem+ ril
Click to expand...
Click to collapse
I am not sure, is there anyway for me to check previous baseband?
GotFired said:
I am not sure, is there anyway for me to check previous baseband?
Click to expand...
Click to collapse
Not unless you made a note of it . Or try
http://forum.xda-developers.com/showthread.php?t=1978840
jje
Hi guys,
I have rooted my i9100 (JB 4.1.2) and flashed it with MS2 NeatROM v5.6 Aroma, which works fine except for the battery life which has plummeted dramatically since I've flashed it. Now I'm hoping to resolve this issue by flashing SiyahKernel S2-v5.0.1 (wish I could post a link but I can't because Rooky forum member).
My questions are:
1. Is the Siyah kernel I’ve selected compatible with my device and ROM? Will it work?
2. How do you check compatibility of kernels vs. installed rom and device? Phone firmware?
3. Can kernels in general improve/influence battery life?
Note!!: I am NOT looking for an opinion on how the combination ROM, Kernel, and Device will turn out, or which is best, I am merely asking if my selected Kernel is compatible with the ROM and device. I am new to rooting and do not know what details in flashed ROM and device specs to pay attention to when selecting a kernel, hence my questions.
Phone details:
SGS2 i9100 (JB 4.1.2)
Current kernel: 3.0.31-1484249 [email protected] #3 SMP PREEMPT Tue Dec 3
PDA: XWMS2
Phone/firmware: XXMS4
Thanks a lot for your help!
I'm in the same boat mate, in fact I think you have the same rom and aroma that I installed on my other half's S2, and I'm also looking for a kernel but too rooky to post in devs threads lol.
Sent from my GT-I9300 using Tapatalk
jammychap said:
I'm in the same boat mate, in fact I think you have the same rom and aroma that I installed on my other half's S2, and I'm also looking for a kernel but too rooky to post in devs threads lol.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Glad to hear I'm not the only one! I know there are numerous tutorials online on how to install kernels and roms, but the ones I found never stated any specific information on what to look for when combining devices, rom and kernels to make them work. Let's hope somebody here can shed some light on our issue!
Vo_1815 said:
Glad to hear I'm not the only one! I know there are numerous tutorials online on how to install kernels and roms, but the ones I found never stated any specific information on what to look for when combining devices, rom and kernels to make them work. Let's hope somebody here can shed some light on our issue!
Click to expand...
Click to collapse
The guys on Android fourms helped me with my S3 but not many on there with the S2 so they directed me here for help.
---------- Post added at 04:26 PM ---------- Previous post was at 03:59 PM ----------
Just for comparison,
I installed
neatrom 5.3 neatrom + aroma v 5.5
and used v6.0.1.2 siyah kernel to root it in the first place.
I'm now looking for a custom rom for overclocking, I put one called Boeffla on my S3 that has an app to go with it for tuning, my score on quadrant has jumped up about 3000 points after some overclocking :good:
Vo_1815 said:
Hi guys,
I have rooted my i9100 (JB 4.1.2) and flashed it with MS2 NeatROM v5.6 Aroma, which works fine except for the battery life which has plummeted dramatically since I've flashed it. Now I'm hoping to resolve this issue by flashing SiyahKernel S2-v5.0.1 (wish I could post a link but I can't because Rooky forum member).
My questions are:
1.Is the Siyah kernel I’ve selected compatible with my device and ROM? Will it work?
2.How do you check compatibility of kernels vs. installed rom and device? Phone firmware?
3.Can kernels in general improve/influence battery life?
Note!!: I am NOT looking for an opinion on how the combination ROM, Kernel, and Device will turn out, or which is best, I am merely asking if my selected Kernel is compatible with the ROM and device. I am new to rooting and do not know what details in flashed ROM and device specs to pay attention to when selecting a kernel, hence my questions.
Phone details:
SGS2 i9100 (JB 4.1.2)
Current kernel: 3.0.31-1484249 [email protected] #3 SMP PREEMPT Tue Dec 3
PDA: XWMS2
Phone/firmware: XXMS4
Thanks a lot for your help!
Click to expand...
Click to collapse
Is not that
Siyah-s2-v6.0b5-CWM?
2. You have to choose/select kernel according to the build number (settings/about phone)
3.yes they have a significant impact on battery life.
You can improve your battery life by using custom kernels.
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Is not that
Siyah-s2-v6.0b5-CWM?
2. You have to choose/select kernel according to the build number (settings/about phone)
3.yes they have a significant impact on battery life.
You can improve your battery life by using custom kernels.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Yes, Siyah-s2-v6.0b5-CWM is the newest update. But because it is a beta I assumed it would not be stable. Perhaps I am wrong about that.
So you're saying I need a kernel that runs on buildnumber XWMS2 (my buildnumber)?
Vo_1815 said:
Yes, Siyah-s2-v6.0b5-CWM is the newest update. But because it is a beta I assumed it would not be stable. Perhaps I am wrong about that.
So you're saying I need a kernel that runs on buildnumber XWMS2 (my buildnumber)?
Click to expand...
Click to collapse
You can flash that kernel on your current rom .
And when choosing kernel like siyah dorimax apolo
You have to see their version which is mentioned in op of the respective kernel .
For e.g apolo v4.x is for jb 4.1.2 roms
For some kernels like philz ..you have to see the build number.
Sent from my GT-I9100 using Tapatalk 2
Right Vo, i've just got home to check out whats on her phone at the mo,
model GT-I9100
ANDROID VER 4.1.2
BASEBAND I9100XXMS4
KERNEL 3.0.31-1418025
[email protected]#3
SMP PREEMPT
BUILD XWMS NEATROM LITE V5.5
So yer the kernel has changed after flashing the rom.
jammychap said:
Right Vo, i've just got home to check out whats on her phone at the mo,
model GT-I9100
ANDROID VER 4.1.2
BASEBAND I9100XXMS4
KERNEL 3.0.31-1418025
[email protected]#3
SMP PREEMPT
BUILD XWMS NEATROM LITE V5.5
So yer the kernel has changed after flashing the rom.
Click to expand...
Click to collapse
Thanks a lot to the both of you! Gonna flash it right now!
Vo_1815 said:
Thanks a lot to the both of you! Gonna flash it right now!
Click to expand...
Click to collapse
Please add [SOLVED] to the thread title.
Hang on a min India, the other halfs phone has philZ on it now, can i still put Siyah v6.0 back on?
There shouldn't be any issues when going from philz to siyah. I haven't used siyah for a while but remember flashing neat with siyah without problems. BTW if you're going to try out dorimanx with neat you should use 8.*** version. If you ask there prepare for some tongue lashing
Sent from my GT-I9100 using xda premium
pargas said:
There shouldn't be any issues when going from philz to siyah. I haven't used siyah for a while but remember flashing neat with siyah without problems. BTW if you're going to try out dorimanx with neat you should use 8.*** version. If you ask there prepare for some tongue lashing
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Cool thanks, v6.0 siyah works just fine :good::good::good:
My phone has baseband version: i8552BUBUAMD5
-can i flash the ROM thru CWM based in XXAMI4 version?
I never quite understood that. :silly:
Many thanks for the replies!
danmonteiro said:
My phone has baseband version: i8552BUBUAMD5
-can i flash the ROM thru CWM based in XXAMI4 version?
I never quite understood that. :silly:
Many thanks for the replies!
Click to expand...
Click to collapse
Yeah but you phone baseband will change from MD5 to XXAMI4
danmonteiro said:
My phone has baseband version: i8552BUBUAMD5
-can i flash the ROM thru CWM based in XXAMI4 version?
I never quite understood that. :silly:
Many thanks for the replies!
Click to expand...
Click to collapse
Yes you can.