I belive that after installing the AOKP jellybean rom and kernel my reception went really bad, now I have installed the 4.1.2 stock firmware and I still have the same reception...
Everyone with the same phone around me have good reception, but I dont know whats wrong...
Hope someone can help me out
Come on, do some research! If you had, you would know you have to change your modem and look here http://forum.xda-developers.com/showthread.php?t=1131950 for a list of modems.
Sent from my GT-I9100 using xda app-developers app
I see, thanks.
I need CWM recovery for installing the modem as far as I understand?
He says BVLP7 is good global modem, though it don't have the global code that I need. But again as I understand I can still use it?
Can anyone give me a good link for installing CWM recovery now?
imagine321 said:
I see, thanks.
I need CWM recovery for installing the modem as far as I understand?
He says BVLP7 is good global modem, though it don't have the global code that I need. But again as I understand I can still use it?
Can anyone give me a good link for installing CWM recovery now?
Click to expand...
Click to collapse
Download the modem you think it's good. Boot into recovery mode (hold volume down/home/power) and flash the zip file with your modem in it.
Christiaan91 said:
Download the modem you think it's good. Boot into recovery mode (hold volume down/home/power) and flash the zip file with your modem in it.
Click to expand...
Click to collapse
I need CWM recovery? When using android recovery I get E:signature verification failed...
imagine321 said:
I need CWM recovery? When using android recovery I get E:signature verification failed...
Click to expand...
Click to collapse
O yes, sorry. You can download rom manager from the play store.
Verstuurd van mijn GT-I9100
Flash it via Odin / Mobile Odin.
Sent from the little guy
Don't use ROM manager it has very poor compatability with the S2. Use Odin as gastonw suggests.
Sent from my GT-I9100 using xda premium
Related
Hi, I'm trying to flash the latest version (6.0.1.0) of the ClockworkMod recovery onto my GT-I9100 but I cant downland the required zip file.
The ROM Manager app gives me a download failed message, and the link on the website does not work, I suspect the app just uses the same download. I would post the link but the site wont let me as it's my first post.
Can anyone help. Is there an alternative download link I can use. I notice the links for 6.0.1.0 for other phone models seem to work but I'm not sure about using them on mine.
Cheers
i have the same problem
penstone said:
Hi, I'm trying to flash the latest version (6.0.1.0) of the ClockworkMod recovery onto my GT-I9100 but I cant downland the required zip file.
The ROM Manager app gives me a download failed message, and the link on the website does not work, I suspect the app just uses the same download. I would post the link but the site wont let me as it's my first post.
Can anyone help. Is there an alternative download link I can use. I notice the links for 6.0.1.0 for other phone models seem to work but I'm not sure about using them on mine.
Cheers
Click to expand...
Click to collapse
penstone said:
Hi, I'm trying to flash the latest version (6.0.1.0) of the ClockworkMod recovery onto my GT-I9100 but I cant downland the required zip file.
The ROM Manager app gives me a download failed message, and the link on the website does not work, I suspect the app just uses the same download. I would post the link but the site wont let me as it's my first post.
Can anyone help. Is there an alternative download link I can use. I notice the links for 6.0.1.0 for other phone models seem to work but I'm not sure about using them on mine.
Cheers
Click to expand...
Click to collapse
In samsung phones the recovery isn't separate. It's bundled along with the kernel
To use CWM6 flash a kernel which uses CWM6 like latest Siyah.
Don't use ROM Manager on GSII to flash recoveries.
atulalvenkar said:
In samsung phones the recovery isn't separate. It's bundled along with the kernel
To use CWM6 flash a kernel which uses CWM6 like latest Siyah.
Don't use ROM Manager on GSII to flash recoveries.
Click to expand...
Click to collapse
I see, thanks for the advise.
penstone said:
Hi, I'm trying to flash the latest version (6.0.1.0) of the ClockworkMod recovery onto my GT-I9100 but I cant downland the required zip file.
The ROM Manager app gives me a download failed message, and the link on the website does not work, I suspect the app just uses the same download. I would post the link but the site wont let me as it's my first post.
Can anyone help. Is there an alternative download link I can use. I notice the links for 6.0.1.0 for other phone models seem to work but I'm not sure about using them on mine.
Cheers
Click to expand...
Click to collapse
I also have the same problem ....But as for the last post he said to flash new kernel like siya ....Will it affect the stock rom or will it have any changed in system data or anything like that??
kingsleyhopper said:
I also have the same problem ....But as for the last post he said to flash new kernel like siya ....Will it affect the stock rom or will it have any changed in system data or anything like that??
Click to expand...
Click to collapse
noop, you just changing the kernel only but you still on perfect pure stock rom
penstone said:
Hi, I'm trying to flash the latest version (6.0.1.0) of the ClockworkMod recovery onto my GT-I9100 but I cant downland the required zip file.
The ROM Manager app gives me a download failed message, and the link on the website does not work, I suspect the app just uses the same download. I would post the link but the site wont let me as it's my first post.
Can anyone help. Is there an alternative download link I can use. I notice the links for 6.0.1.0 for other phone models seem to work but I'm not sure about using them on mine.
Cheers
Click to expand...
Click to collapse
narsimdamha said:
noop, you just changing the kernel only but you still on perfect pure stock rom
Click to expand...
Click to collapse
My apps and setting and other user data will remain right ...Actually i dont have CWM ....For that oly im installing ICS kernel
kingsleyhopper said:
My apps and setting and other user data will remain right ...Actually i dont have CWM ....For that oly im installing ICS kernel
Click to expand...
Click to collapse
flashing a custom kernel like siyah will not wipe ur apps or data ma8, it will only add the latest CWM recovery to the phone, so u can flash it without any issues
Sun90 said:
flashing a custom kernel like siyah will not wipe ur apps or data ma8, it will only add the latest CWM recovery to the phone, so u can flash it without any issues
Click to expand...
Click to collapse
thank you very much m8 .......The kernel just adds CWM and it doesnt change my ROM
thnk you for opening my mind :good:
Ok, I am lost, I don't know what I'm doing wrong but I tried to install the latest XXDLI8 leak, and I am met with error 7 in CWM.
I even downloaded and flashed the needed PDA from sammobile (which is XXBLG8_XABLG8_XXLH1) but I still get error 7? The assert check fails on PreloadInstaller
What's the deal?
Did you flash root and the modem? LH1 IIRC?
Kangburra said:
Did you flash root and the modem? LH1 IIRC?
Click to expand...
Click to collapse
I flashed Cf-root, yes, but it doesn't interfere with what the assert checks check, and I need not flash the LH1 modem since it's already in the firmware I flashed with ODIN.
I flashed i9300XXBLG8 i9300XABLG8 i9300XXLH1, which was listed as the needed PDA to flash the XXDLI8 OTA.
Theshawty said:
I flashed Cf-root, yes, but it doesn't interfere with what the assert checks check, and I need not flash the LH1 modem since it's already in the firmware I flashed with ODIN.
I flashed i9300XXBLG8 i9300XABLG8 i9300XXLH1, which was listed as the needed PDA to flash the XXDLI8 OTA.
Click to expand...
Click to collapse
you need to flash this one: I9300XXBLG8_I9300OXABLG8_I9300XXLG8_HOME.tar
and then the lh1 modem separatly or you will get the error 7.
alirey said:
you need to flash this one: I9300XXBLG8_I9300OXABLG8_I9300XXLG8_HOME.tar
and then the lh1 modem separatly or you will get the error 7.
Click to expand...
Click to collapse
Then why did Sammobile themselves link to I9300XXBLG8_I9300OXABLG8_I9300XXLH1 as the needed PDA?
Don't know why. But had the same problem. Error 7 seems to be an file checksum problem and separte flashing solves it.
Sent from my GT-I9300 using xda premium
Theshawty said:
Then why did Sammobile themselves link to I9300XXBLG8_I9300OXABLG8_I9300XXLH1 as the needed PDA?
Click to expand...
Click to collapse
Was it a hotfile link?
For me it only works without flaws if I use the odin base that perka made. Now and the I do have hiccups with it though.
Kangburra said:
Did you flash root and the modem? LH1 IIRC?
Click to expand...
Click to collapse
Root is not really required to flash the OTA. However the Rom and the modem need to be flashed separately.
Sent from my GT-I9300
---------- Post added at 11:07 AM ---------- Previous post was at 11:04 AM ----------
Theshawty said:
Then why did Sammobile themselves link to I9300XXBLG8_I9300OXABLG8_I9300XXLH1 as the needed PDA?
Click to expand...
Click to collapse
Don't use this Rom. This Rom seem to be corrupt. Instead download the LG8 Rom from goo.im and flash the LH1 modem separately.
Sent from my GT-I9300
pkoper said:
Was it a hotfile link? .
Click to expand...
Click to collapse
Indeed it was. I should have known better.
gillboyzz said:
Don't use this Rom. This Rom seem to be corrupt. Instead download the LG8 Rom from goo.im and flash the LH1 modem separately.
Sent from my GT-I9300
Click to expand...
Click to collapse
Will do.
EDIT: You mean the LG8 one Pulser has uploaded? http://goo.im/devs/pulser/GalaxyS3
Sammobile are linking to http://www.hotfile.com/dl/170853923/e311e2f/I9300XXBLG8_I9300OXABLG8_BTU.zip.html which still needs the LH1 modem flashed after the ROM flash.
It does work, but you have to flash the modem or you get the 7 error. As above the root steps are not needed, until after the OTA anyway.
Kangburra said:
Sammobile are linking to http://www.hotfile.com/dl/170853923/e311e2f/I9300XXBLG8_I9300OXABLG8_BTU.zip.html which still needs the LH1 modem flashed after the ROM flash.
It does work, but you have to flash the modem or you get the 7 error. As above the root steps are not needed, until after the OTA anyway.
Click to expand...
Click to collapse
The only reason I flash cf-root directly after odin'ing the stock ROM is to get CWM so I can flash the OTA.
Theshawty said:
Indeed it was. I should have known better.
Will do.
EDIT: You mean the LG8 one Pulser has uploaded? http://goo.im/devs/pulser/GalaxyS3
Click to expand...
Click to collapse
Nope..the original stock rom..just search with the first initials of the rom on goo
Sent from my GT-I9300
gillboyzz said:
Nope..the original stock rom..just search with the first initials of the rom on goo
Sent from my GT-I9300
Click to expand...
Click to collapse
Well I downloaded it and it seems like it's the "legit" LG8 one so I'll go with it.
Damnit, even more problems. I downloaded and flashed the correct LG8, then I cf-rooted, and installed the LH1 modem and when I finally was supposed to install the OTA, the assert check failed on /system/SW_configuration.xml and threw me an error 7.
Theshawty said:
Damnit, even more problems. I downloaded and flashed the correct LG8, then I cf-rooted, and installed the LH1 modem and when I finally was supposed to install the OTA, the assert check failed on /system/SW_configuration.xml and threw me an error 7.
Click to expand...
Click to collapse
So you odin flashed the base rom
then odin flashed cf-root
boot into cwm and flash LH1 and OTA (no reboot between) and error 7?
Weird. Something wrong with one of those files.
Theshawty said:
Damnit, even more problems. I downloaded and flashed the correct LG8, then I cf-rooted, and installed the LH1 modem and when I finally was supposed to install the OTA, the assert check failed on /system/SW_configuration.xml and threw me an error 7.
Click to expand...
Click to collapse
Pls dont root until fully cooked. Here are my steps.
Do factory reset before flashing
Flash stock BLG8 rom through odin and restart.
On the startup screen where you choose the lang, dont proceed further. Just restrart in the download mode again.
Flash the LH1 modem through odin and restart and again on the startup screen restart the phone in recovery mode. Do factory reset and chose the OTA file flash through recovery. Let the upgarde complete. Dont reboot, just do factory reset again and enjoy the leak.
You may root now if required.
Sent from my GT-I9300
Theshawty said:
I flashed Cf-root, yes, but it doesn't interfere with what the assert checks check, and I need not flash the LH1 modem since it's already in the firmware I flashed with ODIN.
I flashed i9300XXBLG8 i9300XABLG8 i9300XXLH1, which was listed as the needed PDA to flash the XXDLI8 OTA.
Click to expand...
Click to collapse
I initially had the exact same problem .. so I downloaded the I9300BLG8 base Rom again , but the one without the LH1 modem built in and then flashed LH1 modem after flashing the base Rom. This sorted out my problem .. using this method has been working flawlessly ever since XXDLI4 for me .. worth a shot mate .
Sent from my GT-I9300 using xda app-developers app
Kangburra said:
So you odin flashed the base rom
then odin flashed cf-root
boot into cwm and flash LH1 and OTA (no reboot between) and error 7?
Weird. Something wrong with one of those files.
Click to expand...
Click to collapse
Those are the exact steps I took. None of the files seem borked either.
bazzazz said:
I initially had the exact same problem .. so I downloaded the I9300BLG8 base Rom again , but the one without the LH1 modem built in and then flashed LH1 modem after flashing the base Rom. This sorted out my problem .. using this method has been working flawlessly ever since XXDLI4 for me .. worth a shot mate .
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Same here, never used the one with the modem in it.
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
gillboyzz said:
Pls dont root until fully cooked. Here are my steps.
Do factory reset before flashing
Flash stock BLG8 rom through odin and restart.
On the startup screen where you choose the lang, dont proceed further. Just restrart in the download mode again.
Flash the LH1 modem through odin and restart and again on the startup screen restart the phone in recovery mode. Do factory reset and chose the OTA file flash through recovery. Let the upgarde complete. Dont reboot, just do factory reset again and enjoy the leak.
You may root now if required.
Sent from my GT-I9300
Click to expand...
Click to collapse
How do you get odin to flash an OTA file? I thought the whole point of the cf-root was to get to cwm? Did I miss something here?
Kangburra said:
Same here, never used the one with the modem in it.
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
How do you get odin to flash an OTA file? I thought the whole point of the cf-root was to get to cwm? Did I miss something here?
Click to expand...
Click to collapse
Nope.. you can't flash the ota file through odin. Refer to my steps above, once the modem is flashed through odin, you use tge stock recovery to flash the OTA
Sent from my GT-I9300
Requesting that someone make a flashable zip from the newest CWM Touch Image, especially as new 4.4 KitKat ROMs are requiring CWM-based recoveries.
I understand that this can be accomplished through ROM Manager (but I'm getting a download error) or through fast-boot/adb (which I admittedly don't have the time, patience or complete understanding to do) so if someone had time to make a flashable zip, I'd imagine that'd benefit the community greatly.
There is an older version here (http://forum.xda-developers.com/showthread.php?t=1584576) but OP is no longer updating or supporting.
Will attach the IMG below. Thank you.
Clockworkmod Touch Recovery 6.0.4.3 flashable zip supplied by Naddict in Post #4
Naddict said:
try this,
Click to expand...
Click to collapse
Please be sure to Thank him!
clepperM said:
Requesting that someone make a flashable zip from the newest CWM Touch Image, especially as new 4.4 KitKat ROMs are requiring CWM-based recoveries.
I understand that this can be accomplished through ROM Manager (but I'm getting a download error) or through fast-boot/adb (which I admittedly don't have the time, patience or complete understanding to do) so if someone had time to make a flashable zip, I'd imagine that'd benefit the community greatly.
There is an older version here (http://forum.xda-developers.com/showthread.php?t=1584576) but OP is no longer updating or supporting.
Will attach the IMG below. Thank you.
Click to expand...
Click to collapse
Check this out. You can get flashable zip.
http://www.youtube.com/watch?v=nY_vE-dUSX4
clepperM said:
Reserved
Click to expand...
Click to collapse
try this,
Naddict said:
try this,
Click to expand...
Click to collapse
Thank you Naddict. Has anyone flashed with the CWM zip version? Has anyone successfully gone back to Twrp? Any issues flashign oen tot he other?
tonyo123 said:
Thank you Naddict. Has anyone flashed with the CWM zip version? Has anyone successfully gone back to Twrp? Any issues flashign oen tot he other?
Click to expand...
Click to collapse
I haven't flashed a cwm zip, I just use rom manager to install it. But I've gone back and forth a few times recently with no problems. Just messing around the other day I installed a 4.4 and set it up and then flashed twrp and backed up the 4.4. Wiped the phone went back to a 4.3 and then restored the 4.4 nandroid with twrp without any troubles. Apparently it's the initial install that you need cwm for, but caution is advised for now as the next time it may not work. I was bored and just messing around. As always YMMV!
Is there a way to flash cwm on the official firmware for this phone using Odin?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
lildoggs said:
Is there a way to flash cwm on the official firmware for this phone using Odin?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I believe that you need to get the .img file and change it into a .img.tar file to flash it in odin.
tonyo123 said:
Thank you Naddict. Has anyone flashed with the CWM zip version? Has anyone successfully gone back to Twrp? Any issues flashign oen tot he other?
Click to expand...
Click to collapse
I had made my own cwm touch flash zip as others have instructed. You just flash it with twrp if that's what using and use twrp to reboot to recovery to see the newly flashed cwm touch recovery. Vice versa for installing twrp again. However; just remember, backups can only be restored from recovery they were made with.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Can I flash this while in a previous cwm recovery ?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
crxlvr said:
Can I flash this while in a previous cwm recovery ?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Sure. I assume you have your previous version zip in case you want to flash back? I just have latest cwm touch and twrp 2.6.1.0. and twrp 2.5 that I keep on hand.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Naddict said:
try this,
Click to expand...
Click to collapse
Thank you. That was the easiest way to flash CWM 6.0.4.3 to my Note.
Naddict said:
try this,
Click to expand...
Click to collapse
hafridi said:
Thank you. That was the easiest way to flash CWM 6.0.4.3 to my Note.
Click to expand...
Click to collapse
Agreed. My sincerest thanks, sir.
Thanks!
Since my usb is all screwed up (i rotate batteries on external charger) i can't use odin to do my CWM flash.
This is exactly what i need.
Thanks!!!
Thanks!
Need kernel source code used for that recovery
Hi guys,
I was wondering if someone could post the kernel source code that was used for that clockword mod recovery. I need to create a insertable kernel module in recovery mode for the samsung galaxy note.
Regards
cwm recovery zip
Can this cwm recovery zip be used for any phone? And can it be flashed to a phone using rashr?
paramzzthakkarzz said:
Can this cwm recovery zip be used for any phone? And can it be flashed to a phone using rashr?
Click to expand...
Click to collapse
As long as your phone is a SAMSUNG-SGH-I717 (codename used in these forums "quincyatt" is the same thing) you can use a quincyatt recovery.
Sent from my SAMSUNG-SGH-I717
Micromax
My phone is Micromax a190. The model no. Is not yet uploaded on XDA and I don't have any recoveries available for my phone nor do I have any custom Roms available. What do I do now?
paramzzthakkarzz said:
My phone is Micromax a190. The model no. Is not yet uploaded on XDA and I don't have any recoveries available for my phone nor do I have any custom Roms available. What do I do now?
Click to expand...
Click to collapse
Wait for a developer to create tools, ROMs, custom recoveries for your device or if you have the time, patience, and knowledge, check out xda-university.
http://xda-university.com/
Sent from my SAMSUNG-SGH-I717
Currently I flashed my phone using GT-I9100G_LP7_ClockworkMod-Recovery_5.5.0.4. I can;t udpate it to Version 6. What is LP7? Please help. Thanks.
meiyi2 said:
Currently I flashed my phone using GT-I9100G_LP7_ClockworkMod-Recovery_5.5.0.4. I can;t udpate it to Version 6. What is LP7? Please help. Thanks.
Click to expand...
Click to collapse
try searching blazing kernal it helps to update
If you cannot flash a recovery from your recovery then find some custom recovery and flash it with odin. Use an odin guide cause if you misplace the file then you brick it I believe It was pda where you need to flash the kernel correct me if iam wrong
Hope this is an workaround if you cant flash any kernel what was the error that you couldnt flash it or did it flash and nothing happend if so maybe the partition table is different?
Sent from my GT-I9100 using Tapatalk
meiyi2 said:
Currently I flashed my phone using GT-I9100G_LP7_ClockworkMod-Recovery_5.5.0.4. I can;t udpate it to Version 6. What is LP7? Please help. Thanks.
Click to expand...
Click to collapse
how have you resolved?
i cannot upgrade my cwm to 6.0.4.5
Heyyy, so i just came back to android and felt like flashing some kitkat roms so as to enjoy those cool features kitkat offers..i'm currently running stock 4.1.2 JB.
as far as im concerned, first i should flash a rooted+cwm kernel through odin (which i flashed latest siyah for JB)... that went smooth and i got rooted and got cwm, problem is when i want to actually install any rom... I continually get "installation aborted" and the only way to make my phone usable again is to flash a stock firmware through odin.
any ideas ? thanks !
PD: I tried installing the "kitkat cwm compatible" thingy both through odin and through cwm, it did flash correctly, but phone fails to boot. if you dont get this last thing.. its this: http://forum.xda-developers.com/showthread.php?t=2546597
hope anyone out there can give me a hand since im tired of running stock :'(
check the OP again
have you read the OP before flashing KK custom rom. maybe u miss some part to flash it.
You can flash philz kernel on to of your stock JB to get root and recovery (no need to use Odin, you can flash through standard recovery). Then do a backup of your rom and after that flash a cwm-recovery >6.0.4.x (this is needed to be able to install s KitKat ROM). Boot directly after flashing into that recovery, wipe system and data and install KitKat.
Sent from my Nexus 7 using xda app-developers app
AndDiSa said:
You can flash philz kernel on to of your stock JB to get root and recovery (no need to use Odin, you can flash through standard recovery). Then do a backup of your rom and after that flash a cwm-recovery >6.0.4.x (this is needed to be able to install s KitKat ROM). Boot directly after flashing into that recovery, wipe system and data and install KitKat.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the info, i went to the philz kernel thread but i cannot seem to know which file should i download, he says i should look at the kernel code or something like that but i fail to find such thing, any idea ? pleasee. thanks
Poroto said:
Thanks for the info, i went to the philz kernel thread but i cannot seem to know which file should i download, he says i should look at the kernel code or something like that but i fail to find such thing, any idea ? pleasee. thanks
Click to expand...
Click to collapse
Look in settings - about phone (or take a screenshot and post it here)
Christiaan91 said:
Look in settings - about phone (or take a screenshot and post it here)
Click to expand...
Click to collapse
There goes the screenshot! Thanks!
Poroto said:
There goes the screenshot! Thanks!
Click to expand...
Click to collapse
I've got more information there.
Do you know what firmware you installed?
Or you can flash dorimanx kernel through Odin. It also gives you root access. Download this:
Kernel_Dorimanx-V8.43-[12-21]-[24-10]-TAR-FOR-ODIN.tar
If you don't know how to flash it through Odin, look in the op of the dorimanx kernel thread. Just above the download links it's explained.
After that follow the instructions from AndDiSa by flashing a kitkat compatible cwm etc.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Christiaan91 said:
I've got more information there.
Do you know what firmware you installed?
Or you can flash dorimanx kernel through Odin. It also gives you root access. Download this:
Kernel_Dorimanx-V8.43-[12-21]-[24-10]-TAR-FOR-ODIN.tar
If you don't know how to flash it through Odin, look in the op of the dorimanx kernel thread. Just above the download links it's explained.
After that follow the instructions from AndDiSa by flashing a kitkat compatible cwm etc.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Click to expand...
Click to collapse
i did that and now im running kitkat resurrection remix ! thanks a bunch !!
Solved .
Poroto said:
i did that and now im running kitkat resurrection remix ! thanks a bunch !!
Solved .
Click to expand...
Click to collapse
Good to hear. Please add [SOLVED] to the thread title.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Christiaan91 said:
Good to hear. Please add [SOLVED] to the thread title.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Click to expand...
Click to collapse
Done.