Guys, I have a huge problem. My Razr MAXX from Claro Puerto Rico was updated a month ago in the store to the official 4.0.4 rom. Yesterday it popped up a msg saying that there was a new update available. I connected it today to my computer and the Motocast software said that there was the 4.1.2 update available so I took the plunge and tell it to update the phone. It asked me to choose on either erase the phone or just install it, but that it was highly recommended that I should erase the phone to install. I clicked yes and after 5 minutes it showed a failed message on the PC screen and the phone stuck on the bootloader. I went to claro to ask for help and they wont even try to fix it because the warranty ended last month.
I need the files and the procedure to make it work again, I gave this one to mom after I got back to T-mo and she needs it urgently to stay in touch.
Few users getting the problem if they flashing there razr through moto cast but its just a soft brick ya made and have bot to worry just download first fastboot which is for ya claro puerto rico under the latam and flash that using rsd lite . I hope ya might be knowing the method of flashing fastboot manually. http://forum.xda-developers.com/showthread.php?t=2231289
Please hit that thanks button if i helped ya
anurag.dj2u said:
Few users getting the problem if they flashing there razr through moto cast but its just a soft brick ya made and have bot to worry just download first fastboot which is for ya claro puerto rico under the latam and flash that using rsd lite . I hope ya might be knowing the method of flashing fastboot manually. http://forum.xda-developers.com/showthread.php?t=2231289
Please hit that thanks button if i helped ya
Click to expand...
Click to collapse
Thanks for the prompt response, do I need the special cable or with a standard usb cable can I do the trick?
With standard usb cable only ya can work till it showing battery ok in apfastboot mode . If it showing battery ok then switch off ya phone to save some battery from drainage. Once ya done with downloading on ya phone and flash with no worries
Please hit that thanks button if i helped ya
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
If it showing low battery there are few tricks may work with ya , if ya failed in all the tricks then ya need to order a fastboot cable from ebay or any other online websites
Please hit that thanks button if i helped ya
anurag.dj2u said:
With standard usb cable only ya can work till it showing battery ok in apfastboot mode . If it showing battery ok then switch off ya phone to save some battery from drainage. Once ya done with downloading on ya phone and flash with no worries
Please hit that thanks button if i helped ya
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
If it showing low battery there are few tricks may work with ya , if ya failed in all the tricks then ya need to order a fastboot cable from ebay or any other online websites
Please hit that thanks button if i helped ya
Click to expand...
Click to collapse
It shows battery ok,
Ok to program
Connect USB
Data Cable
I downloaded the rsd lite and the image file.
installed rsd lite and fired it
connected the phone and it installed the drivers
now what????
mindwarp1571 said:
It shows battery ok,
Ok to program
Connect USB
Data Cable
I downloaded the rsd lite and the image file.
installed rsd lite and fired it
connected the phone and it installed the drivers
now what????
Click to expand...
Click to collapse
Start rsd lite...connect your phone to your pc and when the pc recognise your phone it will show in one of your rsd lite boxes,then click the 3 dots and select the file you want to flash and hit start,make sure you wait until it finishes do not unplug phone before.
Sent from my XT910 using xda premium
I think I'm missing something here. The laptop recognizes the phone, when it gets connected, but RSD wont show device info. Is there anything else I haven't do?
mindwarp1571 said:
I think I'm missing something here. The laptop recognizes the phone, when it gets connected, but RSD wont show device info. Is there anything else I haven't do?
Click to expand...
Click to collapse
Oh yeah..I believe the phone needs to be in fasboot mode,sorry about that.
Sent from my XT910 using xda premium
AztekSoul said:
Oh yeah..I believe the phone needs to be in fasboot mode,sorry about that.
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
Yeah, it did, and I revived it... at last!!!!
Thanks guys!!!
mindwarp1571 said:
Yeah, it did, and I revived it... at last!!!!
Thanks guys!!!
Click to expand...
Click to collapse
Glad you go it going again..cheers!!
Sent from my XT910 using xda premium
Related
hello, yesterday i wanted to flash a new rom.
i made full wipe, deleted cache and dalvik cache.
and i made a restart before flashing the new rom.
now i get the message: device is locked, status code:0
battery ok
ok to program
transfer mode:
usb connected
what can i do to rescue the phone ? it has been bought 3 weeks ago in germany for 489 euro.
All razrs currently have the locked status, it's referring to the boot loader which moto has declined to unlock.
Sent from my XT910 using xda premium
is there no way to get it unlocked ?
489 has been paid 3 weeks ago. the phone is only 3 weeks old. it has been used for 1 week ((
kirmizibasliklioglan said:
is there no way to get it unlocked ?
489 has been paid 3 weeks ago. the phone is only 3 weeks old. it has been used for 1 week ((
Click to expand...
Click to collapse
Can you charge the battery?
It's normal, nothing wrong happened.
At this time you can flash a new compatibile rom via RSD
hello, i can charge the battery. there is no problem. but i can not find a compitable rom. i have tried 2 different roms, unsuccesfull. i always get an error message after a few steps. the phone is connected, drivers are installed, but there is no compitable rom do you have a link for me ?
kirmizibasliklioglan said:
hello, i can charge the battery. there is no problem. but i can not find a compitable rom. i have tried 2 different roms, unsuccesfull. i always get an error message after a few steps. the phone is connected, drivers are installed, but there is no compitable rom do you have a link for me ?
Click to expand...
Click to collapse
Go Motorola Suport Website and look for Warranty. Provide your IMEI number and you'll get the service provider (carrier) you phone is attached. Then you'll know wich rom to flash.
Motorola Support - Warranty Status
hi thank you for the link. motorola germany can not help me because the device has been rooted, they told.
now i can not charge the battery. battrery low is to see on the display
i can connect my phone to pc but i dont know how and which rom i can flash
kirmizibasliklioglan said:
hi thank you for the link. motorola germany can not help me because the device has been rooted, they told.
now i can not charge the battery. battrery low is to see on the display
i can connect my phone to pc but i dont know how and which rom i can flash
Click to expand...
Click to collapse
But can you normally reboot your phone now?
You need to recharge before attempting to flash.
If you can't do this, try this link. I don't know if it works
http://forum.xda-developers.com/showthread.php?t=1549625
I think you can flash 651.167.26 or .19/20. You can find it on Motorola official roms thread
http://www.android-hilfe.de/root-hacking-modding-fuer-motorola-razr/232299-factory-adapter.html
5€ and your Phone will be fine...
To charge your phone: Click the link
To load a stock ROM: Click the link
If you still have questions, there's usually someone here.
okay, i believe i have solved this problem.
i have opened the back cover, cut the usb cable (from my old htc)
connected black to minus
connecten red to plus and plugged in to power...
after 5 minutes battery was ok, instead of "battery low"
i have uninstalled the old rsd lite
downloaded rsd lite v5.6
downloaded "SPDREM_U_01.6.5.1-167_SPU-15-M2_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml" sorry, i don´t know the link
i have pressed volume down, volume up and power button.
selected fastboot mode.
started rsd lite
selected the "spdrem_u_..." file
and pressed start. it took about 15 minute
i will upload a few photos tonight
thank you for your help
kirmizibasliklioglan said:
hi thank you for the link. motorola germany can not help me because the device has been rooted, they told.
now i can not charge the battery. battrery low is to see on the display
i can connect my phone to pc but i dont know how and which rom i can flash
Click to expand...
Click to collapse
Get your IMEI in sdcard door of your razr then visit motorola support website I posted and you'll know wich rom to flash. You'll need to flash it with a factory cable as said above.
Good luck!
Sent from my XT910 using Tapatalk 2
kirmizibasliklioglan said:
okay, i believe i have solved this problem.
i have opened the back cover, cut the usb cable (from my old htc)
connected black to minus
connecten red to plus and plugged in to power...
after 5 minutes battery was ok, instead of "battery low"
i have uninstalled the old rsd lite
downloaded rsd lite v5.6
downloaded "SPDREM_U_01.6.5.1-167_SPU-15-M2_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml" sorry, i don´t know the link
i have pressed volume down, volume up and power button.
selected fastboot mode.
started rsd lite
selected the "spdrem_u_..." file
and pressed start. it took about 15 minute
i will upload a few photos tonight
thank you for your help
Click to expand...
Click to collapse
nice to hear it worked. Cheers
Sent from my XT910 using Tapatalk 2
Hi
Please assist in this regard, I rooted my device and installed Rom Manager, and tried to flash MIUI Rom. My devices rebooted but were stuck on the Moto boot screen. I tried system recovery by holding down volume+- & power button, and it indicated my device were locked. My battery is flat and I'm unable to charge the battery at all. firmware 65.1.40.XT910.MERetail.en.06 Android Ver : 2.3.6. How do I get my device to work again amd where can I find the original Rom to flash with RSD lite ???
You feedback would be much appreciated.
Regards.
http://forum.xda-developers.com/showthread.php?t=1539192
This should get you started. You can try an old school battery pull (yes it is possible to remove the back, just have to pry like hell)
EDIT: Found a video on youtube for exactly this scenario.
http://m.youtube.com/#/watch?featur...ch?v=QfT2Bejkcdk&feature=youtube_gdata_player
Good luck mate
Sent from my XT912 using xda premium
Team black hat adapter
shop.teamblackhat.info/Factory-Adapters-motadapt.htm
I recommend getting a tbh adapter. It lets you power the phone directly from USB even with a dead battery. After that you need to use RSD liter or a similar tool to fastboot he phone back to stock.
Resolved Problem !!!
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Bricked Razr XT910
My razr xt910 is bricked,whenever i turn it on it goes to fastboot with the following message:Ap Fastboot Flash Mode (flash failure)
Battery Low(No matter how much i hcarge it) ,Please Need Help,
Bought From London
arendshp said:
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Click to expand...
Click to collapse
lol... Am I high or did you just shoved 5v on your Razr 3.7v battery directly from the usb port?
please help me,the razr is bricked ,it says locked and rsd is not detecting it,ive been trying to unbrick for the last 4 hours.pleas help
arendshp said:
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Click to expand...
Click to collapse
Your picture inspired me so I just made a factory cable, pretty easy.
Bricked MOTOROLA xt910s
Dear concerns,
I was using MOTO xt910s Korean, during the software updating its bricked and I didn’t take any recovery backup. 1st my phone start and struck on LOGO and also go to recovery mode, but after that I discussed with one developer and he has changed the KERNAL of my mobile, now it only on in AP fastboot Mode. I am so worried about my phone, please give me solid solution. And 1 thing more during all that its battery also dead, I am also searching new battery.
I am waiting for your best and earlier response.
Thanks & Regards,
Usman
usman.yousaf said:
Dear concerns,
I was using MOTO xt910s Korean, during the software updating its bricked and I didn’t take any recovery backup. 1st my phone start and struck on LOGO and also go to recovery mode, but after that I discussed with one developer and he has changed the KERNAL of my mobile, now it only on in AP fastboot Mode. I am so worried about my phone, please give me solid solution. And 1 thing more during all that its battery also dead, I am also searching new battery.
I am waiting for your best and earlier response.
Thanks & Regards,
Usman
Click to expand...
Click to collapse
Wipe cid with fastboot.Use CMD to flash a EU Jellybean.
Sent from my XT910 using xda app-developers app
Need Solution of bricked MOTO XT910S
我顶你个肺隔膜 said:
Wipe cid with fastboot.Use CMD to flash a EU Jellybean.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Dear i am not a developer, i am a noob, please provide me easy way to flash my phone. please support me i am so worried
usman.yousaf said:
Dear i am not a developer, i am a noob, please provide me easy way to flash my phone. please support me i am so worried
Click to expand...
Click to collapse
Maybe english is too bad to explain this..
http://pan.baidu.com/share/link?shareid=1379604126&uk=4010743545
Rember to wipe your Cid first.
Download this,extract all the files content inside to where your extraxted EU Fastboot file is.And run the 运行我.bat,this will flash the EU ROM to your phone.This thing may damge your phone(Im using it with no problem),I wont pay any responsibility to any damge to your data,hardware or anything.
Sent from my XT910 using xda app-developers app
How Did You Do This?
arendshp said:
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Click to expand...
Click to collapse
I'm in the same situation and need to charge my bricked XT910. If I can only do it the way you did, I could take it from from there with returning to stock ROM. Please show me how you did this. Thanks!
Daddyoyah said:
I'm in the same situation and need to charge my bricked XT910. If I can only do it the way you did, I could take it from from there with returning to stock ROM. Please show me how you did this. Thanks!
Click to expand...
Click to collapse
Motorola Fastboot/Factory Programming Cables Links
Sent from my XT907 using Tapatalk
unable to root no matter what method i try.
i have updated the drivers, tried 3 different methods two of this forums one was zergush i believe.
still no use
phone is a lagathon with all this moto crap and other stuff want to get rid of it asap
any help or ideas ?
razr xt 910 running ics 4.04 fido canada
Did you tried this one?
http://forum.xda-developers.com/showthread.php?t=1710871
Always worked for me
Well, you need to tell us what went wrong by describing step by step what did you do and what were the outcomes. Crystal balls are scarce these days.
Sent using a touch screen
Napisane na ekranie dotykowym
Vatazhka said:
Well, you need to tell us what went wrong by describing step by step what did you do and what were the outcomes. Crystal balls are scarce these days.
Sent using a touch screen
Napisane na ekranie dotykowym
Click to expand...
Click to collapse
i followed the options in the op and they didnt work.
i installed the drivers, checked all the stuff in developer options and ran the software. and it just says rooting and nothing happens to my phone that is what i did. i tried the link that is posted above but no luck at all. my phone is recognized by pc that it is connected but nothing happening to it.
plus i tried to rsd lite to reinstall ics and in fastboot mode my pc is not able to pick up the usb. maybe the pc is not picking up the usb drivers i dont understand why that would be happening....if so....
still no luck guys please help
i tried reinstalling the ics through rsd lite and now im stuck in fastboot window and the error i keep getting is 6/21 from the rsd lite....
any ideas how to get out of this mess now ?
naifs_br10 said:
i tried reinstalling the ics through rsd lite and now im stuck in fastboot window and the error i keep getting is 6/21 from the rsd lite....
any ideas how to get out of this mess now ?
Click to expand...
Click to collapse
Go buy a good usb cable just to be sure. And use another comp (install drivers, rsd). Go to fastboot mode and verify if says usb connected.
Flash with RSD
R: [Q] unable to root
Try this method http://forum.xda-developers.com/showthread.php?t=1453660
It worked for me!!
Sent from my XT910 using xda app-developers app
heblu said:
Go buy a good usb cable just to be sure. And use another comp (install drivers, rsd). Go to fastboot mode and verify if says usb connected.
Flash with RSD
Click to expand...
Click to collapse
i was using a factory cable DOH
savezia said:
Try this method http://forum.xda-developers.com/showthread.php?t=1453660
It worked for me!!
yes it worked once i got rid of the factory cable and used the normal cable lol
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
thanks guys for all your help appreciate it
I think I messed up when I was playing around with it.
I tried to install D-Wiz via BMM on System 2 Slot, it wouldn't work so I tried stuff. And I restored the cid.img.
I can still go to the stock bootloader.
I've tried to install some stock ROMs with RSD and Eternity flash script. All failed.
The ROMs I've tried are:
- SPYDERIRD_U.01.26.0_SPD-IRD-21_SIGN_ASIA_RETAIL_HKTW.xml.zip -> Failed flashing process. 1/13flash cdt.bin "cdt.bin_singed" -> Phone returned FAIL.
- VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml.zip (I didn't realize it was for another device. >.<)
- SPDIRD-40_ASIA_RT_1C.91P_CFC_P2B_Signed.xml.zip -> Failed flashing process. 6/22 flash cdt.bin "cdt.bin_signed" -> Phone returned FAIL.
AP Fastboot Flash Mode (S)
0A.6C
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Transfer Mode:
USB Connected
Click to expand...
Click to collapse
I have the backup of cid.img and boot.img.
Can someone point me to the right direction?
Any help would be very appreciated. Thank you.
(Should I post this on "Droid RAZR Q&A, Help & Troubleshooting" sub instead? After browsing for more here I think it's the right place.)
Have u tried this ROM? Via rsdlite (this is for my RAZR XT910)GSM version
SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_ASIA_OPERATOR_CFC_HWp2b_SIGNED.xml
or something similar to this......
---------- Post added at 04:43 AM ---------- Previous post was at 04:24 AM ----------
One more thing...
Can u charge ur device...
If not please Dont keep it on for too long ....or its battery will go dead n razr wont allow anything to be flashed!
then to charge it ull have to open it ! :crying:
Hello hrishi21007.
Thank you, I'll try that one.
Yes, I can charge my device, choosing BP Tools would show a blank screen most of the time, but if after 4-5 times of rebooting and choosing that menu again will show the battery screen somehow.
I'll post the result when I'm done. I'm charging the phone at the moment.
That did the trick. Thank you!
I flashed SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_ASIA_OPERATOR_CFC_HWp2b_SIGNED.xml.zip with RSD after charging to 100%.
IBrickedMyPhone said:
That did the trick. Thank you!
I flashed SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_ASIA_OPERATOR_CFC_HWp2b_SIGNED.xml.zip with RSD after charging to 100%.
Click to expand...
Click to collapse
Hit thanks Button bellow my name
<--
I got this problem too, I get pass step 1/19 but then I have the same "cdt.bin_signed" Phone returned fail again in the step 1/6. I dont know what to do :crying:
Ya all are flashing ICS Asian and unfortunately ya kernel has been changed to jellybean when ya flashed D-Wiz on ya RAZR.
Ok so ya have soft bricked ya razr , no need to worry just all ya need to do is flash jellybean .EU (Europe retail) to fix ya mobile phone .
http://forum.xda-developers.com/showthread.php?t=2231289
Download last retail British.
And cdt.bin error ya getting because ya trying to degrade it which may hard brick ya phone forever .
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
---------- Post added at 07:03 AM ---------- Previous post was at 06:59 AM ----------
hrishi21007 said:
Have u tried this ROM? Via rsdlite (this is for my RAZR XT910)GSM version
SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_ASIA_OPERATOR_CFC_HWp2b_SIGNED.xml
or something similar to this......
---------- Post added at 04:43 AM ---------- Previous post was at 04:24 AM ----------
One more thing...
Can u charge ur device...
If not please Dont keep it on for too long ....or its battery will go dead n razr wont allow anything to be flashed!
then to charge it ull have to open it ! :crying:
Click to expand...
Click to collapse
Hrishi please do not suggest anyone to open there RAZR because RAZR having a nano layer inside and outside which protects it from water resistant and in case if anyone opens it warranty will no more void .
There are fastboot cable is available on ebay India ya can buy it in cheap price and can fix if its required instead of teardown and all crap .
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
anurag.dj2u said:
Ya all are flashing ICS Asian and unfortunately ya kernel has been changed to jellybean when ya flashed D-Wiz on ya RAZR.
Ok so ya have soft bricked ya razr , no need to worry just all ya need to do is flash jellybean .EU (Europe retail) to fix ya mobile phone .
http://forum.xda-developers.com/showthread.php?t=2231289
Download last retail British.
And cdt.bin error ya getting because ya trying to degrade it which may hard brick ya phone forever .
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
---------- Post added at 07:03 AM ---------- Previous post was at 06:59 AM ----------
Hrishi please do not suggest anyone to open there RAZR because RAZR having a nano layer inside and outside which protects it from water resistant and in case if anyone opens it warranty will no more void .
There are fastboot cable is available on ebay India ya can buy it in cheap price and can fix if its required instead of teardown and all crap .
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
Click to expand...
Click to collapse
Nope I still can't flash it. It stops in the step 6/14. And it says "cdt.bin_signed". Phone returned FAIL. It was a Gingerbread 2.3.6 Asian and I tried to flash it and I made all the noob mistakes and ended up hard bricking it. I already have the factory cable but I still can't flash it. My Flashboot screen says the following:
Invalid Flash Mode (S) (Boot Failure)
0A.77
eMC info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Satus Code: 0
Battery OK
OK To Program
Transfer Mode:
USB Connected
Initial CC OTV (CC System): Invalid SP Patch
Invalid CC HAB (CC system, status code: 0X004E)
Invalid CC OTV (CC: System)
I read in other Forums that maybe changing the Radio file for one of EU would make a difference but I have no idea on how to.
anurag.dj2u said:
Hrishi please do not suggest anyone to open there RAZR because RAZR having a nano layer inside and outside which protects it from water resistant and in case if anyone opens it warranty will no more void .
There are fastboot cable is available on ebay India ya can buy it in cheap price and can fix if its required instead of teardown and all crap .
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
Click to expand...
Click to collapse
SORRY MYKEYBOARD IS LOCKED ON CAPS
OKAY...I.DIDNT SAY THAT U SHLD OPEN.IT...I JUST WARNED HIM WITH WHATEVER MY EXPERIENCE THAT I HAD...
N ABT THE WARRANTY...ITS ALREADY VOID WHEN U ROOT N FLASH IT...
EACH FLASH IS LOGGED IN THE DEVICE WHICH MOTO CAN FIGURE OUT IF THEY WANT...
NO OFFENCE,BUT GET UR FACTS STRAIGHT N READ CAREFULLY PLZ...:good:
I JUST SAID HIM TO CHARGE HIS PHONE...THATS ALL...
ANYWAYS ANSWER THIS ANURAG ...
BTW CANT HE COME BACK TO ASIARETAIL VIA BMM?
AFTER DOING WHAT U SAID...HE CAN JUST CHANGE THE KERNEL VIA BMM...N THEN CAN FLASH ICS...WHATSAY?WILL THAT WORK?0
He can obliviously degrade to ics or gb if he had updated jellybean via bmm but here as i can see he stuck at fastboot invalid method so unless he doesn't flash appropriate fastboot files he can't get rid of it .
First getting a working RAZR is important not what BMM can do and he has already tried his region ICS fastboot but unfortunately still popping with thr same s**t .
I did not take ya wrong but i did not mean that as ya thought. I said about teardown because ya a senior member and ya almost know everything about RAZR because ya have already made so many of videos to help others and i really respect that and I'm ya subscribed viewer on YouTube but do ya really think ya did not say to open the RAZR if yes then "is it really good to open" , if not then i really sorry i did not read ya post
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
I have the same problem on my xt910. I'm stuck in fastboot. My also fails on 6/19 and won't boot normally.
Sent from my HTC_PN071 using xda premium
teiva said:
I have the same problem on my xt910. I'm stuck in fastboot. My also fails on 6/19 and won't boot normally.
Sent from my HTC_PN071 using xda premium
Click to expand...
Click to collapse
Ya stucking at cdt.bin error .. Its all because of ya all flashing different region fastboot
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
anurag.dj2u said:
He can obliviously degrade to ics or gb if he had updated jellybean via bmm but here as i can see he stuck at fastboot invalid method so unless he doesn't flash appropriate fastboot files he can't get rid of it .
First getting a working RAZR is important not what BMM can do and he has already tried his region ICS fastboot but unfortunately still popping with thr same s**t .
I did not take ya wrong but i did not mean that as ya thought. I said about teardown because ya a senior member and ya almost know everything about RAZR because ya have already made so many of videos to help others and i really respect that and I'm ya subscribed viewer on YouTube but do ya really think ya did not say to open the RAZR if yes then "is it really good to open" , if not then i really sorry i did not read ya post
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
Click to expand...
Click to collapse
Ok so any ideas on how can I get out of the mess I got into?
Ya flashing wrong fastboot file look our for appropriate fastboot because cdt.bin error comes only when ya flash wrong kernel
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
Hello,
I've read numerous times about people being able to restore their dead bricked phones. No button combination will get my LG Optimus L9 P769 (T-mobile) to turn on. I think bricked it while trying to complete a carrier unlock. I understand that I can try to restore my phone through either fastboot or kdz. For fastboot, I was able to install the omap driver, but you know how I'm supposed to install a second driver? Well, I can't seem to do that. Maybe I'm doing something wrong? I would love an explanation of how to install the driver a second time. I know I'm doing something wrong, because when I use the fastboot script to flash the xloader and uboat, I just get "waiting for device." Also, if I want to flash a kdz, do I need fastboot drivers? I feel like my success depends on installing the fastboot drivers properly, but my computer and two others would not let me do that.
I'm really new to this stuff, so any help is appreciated! Also, please excuse me if I'm using the terminology incorrectly. Like I said, I'm new to all this.
Thank you in advance!
To install a kdz, you need to be in upgrade mode. Hold the volume up button then connect it to the computer.
Sent from my LG-P769 using XDA Premium 4 mobile app
LaDY Vengeance said:
To install a kdz, you need to be in upgrade mode. Hold the volume up button then connect it to the computer.
Sent from my LG-P769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
What if the phone doesn't turn on? Does it still go into upgrade mode?
Yes.
Sent from my LG-P769 using XDA Premium 4 mobile app
LaDY Vengeance said:
Yes.
Sent from my LG-P769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok thanks! I shall try later!
Did it work? I think you should Do fastboot.. that's what I used when mines didn't power on..
Sent from my LG-P769 using XDA Premium HD app
Linux
Get a live linux distribution and try this:
http://vincenzoml.blogspot.it/2013/08/lg-l9-unbrick-script.html
LaDY Vengeance said:
Yes.
Sent from my LG-P769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hello,
So I finally tried what you said, but it didn't work. Which program should I use to flash the kdz? Also, when I press up, should the phone have the battery inserted or not? When I tried the KDZ Updater, it said phone was not found.
simfate said:
Hello,
So I finally tried what you said, but it didn't work. Which program should I use to flash the kdz? Also, when I press up, should the phone have the battery inserted or not? When I tried the KDZ Updater, it said phone was not found.
Click to expand...
Click to collapse
You need to install ICS x and u boot then flash KDZ by offline method.
Nathan.7118391 said:
You need to install ICS x and u boot then flash KDZ by offline method.
Click to expand...
Click to collapse
Hello, I can't get into fastboot. It may be that the phone battery does not have a charge and so the fastboot script does not recognize it when I insert it into the phone after 4 seconds. Could that be a possibility? Because I tried everything, tried many different timings many times, to no avail!
simfate said:
Hello, I can't get into fastboot. It may be that the phone battery does not have a charge and so the fastboot script does not recognize it when I insert it into the phone after 4 seconds. Could that be a possibility? Because I tried everything, tried many different timings many times, to no avail!
Click to expand...
Click to collapse
I was just in the same boat as you and pretty much gave up hope but finally got fastboot working and flashed ics x and u and bam it worked like a charm on offline flash method. You just have to pit usb cable in phone w/o battery in and go to device manager. When you see it popup under other devices right click and press install driver. Make sure you have electronic signatures disabled or it will give a error and not install. This is what prevented me from getting it to work the first 100 times! Now run CMD. TYPE CD C:/FASTBOOT < OR C:/ W/E FOLDER NAME IT IS. THEN RUN START.BAT. < OR W/E THE .BAT FILE INSIDE YOUR FILE IS NAMED. Now press enter. It should prompt to plug in phone. I put my battery in as soon as plugged in and it worked. Now Choose option 5. Let it do its thing. Now go reinstall driver as done before to be safe. Then remove your battery. Hold volume + button and plug usb in. S/W upgrade mode should come up. Slide your battery in and proceed to the offline flash method to flash you kdz file. Should be alive again! Mine was tricky going into sw upgrade mode. Sometimes it came right up then sometimes it took 4 or 5 tries so dont give up! Goodluck and you can do it! I almost gave up I felt so hopeless about getting it to work then it finally worked like a charm!
lwg45714 said:
I was just in the same boat as you and pretty much gave up hope but finally got fastboot working and flashed ics x and u and bam it worked like a charm on offline flash method. You just have to pit usb cable in phone w/o battery in and go to device manager. When you see it popup under other devices right click and press install driver. Make sure you have electronic signatures disabled or it will give a error and not install. This is what prevented me from getting it to work the first 100 times! Now run CMD. TYPE CD C:/FASTBOOT < OR C:/ W/E FOLDER NAME IT IS. THEN RUN START.BAT. < OR W/E THE .BAT FILE INSIDE YOUR FILE IS NAMED. Now press enter. It should prompt to plug in phone. I put my battery in as soon as plugged in and it worked. Now Choose option 5. Let it do its thing. Now go reinstall driver as done before to be safe. Then remove your battery. Hold volume + button and plug usb in. S/W upgrade mode should come up. Slide your battery in and proceed to the offline flash method to flash you kdz file. Should be alive again! Mine was tricky going into sw upgrade mode. Sometimes it came right up then sometimes it took 4 or 5 tries so dont give up! Goodluck and you can do it! I almost gave up I felt so hopeless about getting it to work then it finally worked like a charm!
Click to expand...
Click to collapse
I have a question, can a computer detect the phone with the battery in it? Like the omap4430 usb device? Because for me, the computer detects it whether the battery is in or not... both ways.
simfate said:
I have a question, can a computer detect the phone with the battery in it? Like the omap4430 usb device? Because for me, the computer detects it whether the battery is in or not... both ways.
Click to expand...
Click to collapse
Yes it will detect it. However you need to install the omap in two different locations for it to work.
Sent from my LGMS769 using XDA Premium 4 mobile app
kuma82 said:
Yes it will detect it. However you need to install the omap in two different locations for it to work.
Sent from my LGMS769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The problem is, I can't install the driver in the second location because it doesn't come up in device manager.. I was thinking maybe there's a problem with the battery, like it doesn't have a charge or something. Because when I run fastboot it doesn't detect the battery no matter what timing I used. I tried everything. If I use the old fastboot script and I get to "fastboot? y or N" and I enter y, it keeps asking the same question.
simfate said:
The problem is, I can't install the driver in the second location because it doesn't come up in device manager.. I was thinking maybe there's a problem with the battery, like it doesn't have a charge or something. Because when I run fastboot it doesn't detect the battery no matter what timing I used. I tried everything. If I use the old fastboot script and I get to "fastboot? y or N" and I enter y, it keeps asking the same question.
Click to expand...
Click to collapse
Have you read my post about enabling hidden/inactive devices in device manager?
If you havent you should read it and if you have
When the inverted fastboot pops up (on your phone) remove the usb and place it back in.
---------- Post added at 04:16 AM ---------- Previous post was at 04:11 AM ----------
simfate said:
The problem is, I can't install the driver in the second location because it doesn't come up in device manager.. I was thinking maybe there's a problem with the battery, like it doesn't have a charge or something. Because when I run fastboot it doesn't detect the battery no matter what timing I used. I tried everything. If I use the old fastboot script and I get to "fastboot? y or N" and I enter y, it keeps asking the same question.
Click to expand...
Click to collapse
Have you read my post about enabling hidden/inactive devices in device manager?
If you havent you should read it and if you have
When the inverted fastboot pops up (on your phone) remove the usb and place it back in, this should make the driver pop up.
kuma82 said:
Have you read my post about enabling hidden/inactive devices in device manager?
If you havent you should read it and if you have
When the inverted fastboot pops up (on your phone) remove the usb and place it back in.
---------- Post added at 04:16 AM ---------- Previous post was at 04:11 AM ----------
Have you read my post about enabling hidden/inactive devices in device manager?
If you havent you should read it and if you have
When the inverted fastboot pops up (on your phone) remove the usb and place it back in, this should make the driver pop up.
Click to expand...
Click to collapse
Yes, i've read that post (I think I've read everything on xda related to fastboot!) I don't get an inverted fastboot on the phone's screen. My phone doesn't turn on at all.. Like I said, I'm still struggling to get into fastboot.
Could be a problem with the battery? I'm going to get an external battery charger and try charging the battery.
simfate said:
Yes, i've read that post (I think I've read everything on xda related to fastboot!) I don't get an inverted fastboot on the phone's screen. My phone doesn't turn on at all.. Like I said, I'm still struggling to get into fastboot.
Could be a problem with the battery? I'm going to get an external battery charger and try charging the battery.
Click to expand...
Click to collapse
How did your device get in this state? Depending on what happened your device may not be fixable.
Sent from my LGMS769 using XDA Premium 4 mobile app
kuma82 said:
How did your device get in this state? Depending on what happened your device may not be fixable.
Sent from my LGMS769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It died after I plugged it into the computer. I never rooted it and has the stock software. Before dying I also carrier-unlocked it using a cheap code from ebay.