Hi all, I desperately need help to fix my s5839i. The phone was rooted sometime ago. Recently the phone was unable to charge. I saw recommendation in the forum to flash the firmware. I connected the phone and download the firmware. When I flash using ODIN, i got the following message:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> S5839iBUMG1_S5839iVDIMG1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I left the phone all day on the charger but still the phone cannot charge. Need some experts advise please.
Please post your question in Questions and Answers thread and not in General thread as their names suggest, and we all will be happy to help you
iamareebjamal said:
Please post your question in Questions and Answers thread and not in General thread as their names suggest, and we all will be happy to help you
Click to expand...
Click to collapse
My apologies as i am newbie to the forum. I am opening a new thread in QnA. Admin please assist to close this thread.
Charge ur phne by removing ur battery.it worked for me!!!
Sent from my GT-S5830i using xda app-developers app
rockonhell said:
Charge ur phne by removing ur battery.it worked for me!!!
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Tried without the battery. Press the ON button and still the phone is dead.
Note: I have open a new thread in QnA section and would like to close this thread as requested earlier.
mizandude said:
Note: I have open a new thread in QnA section and would like to close this thread as requested earlier.
Click to expand...
Click to collapse
REPORTED
thank you,
p.007
Mod Edit
Thread closed at the request of [OP]
malybru
Forum Moderator
Related
So, I have a galaxy s 3, the international gsm model. It had a jelly bean stock rom, everything working well until it suddenly went off and stuck in bootloop (with the samsung galaxy s3 - i9300 logo).
After I did some research here at XDA i noticed that i'm not the first to experience this, and so I tried the several solutions offered (that is - factory reset as explained here: http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6). This solution worked, it booted and it looked like i had found the solution... Until it happened again -- the bootloop. I thought it might have been a question of the wrong pit file (because in another thread one user found a solution this way thought i cant find the thread now), so I tried several pits with odin, and kept having the same error:
<ID:0/039> Odin v.3 engine (ID:39)..
<ID:0/039> File analysis..
<ID:0/039> SetupConnection..
<ID:0/039> Initialzation..
<ID:0/039> Set PIT file..
<ID:0/039> DO NOT TURN OFF TARGET!!
<ID:0/039> Get PIT for mapping..
<ID:0/039> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I sent it to a local repairing service (not samsung, cause the custom binary count is set to 2 so not under warranty) and they returned it to me saying they couldn't repair it cause the "jtag is not yet supported, but might be in the near future" and that "the bootloader is broken".
It is still able to enter download mode. Any suggestions/ideas?
Hmm.
"the bootloader is broken" sounds a bit tough. :/
What caused the bootloop in the first place?
Are you sure you never used another device's PIT?
Try flashing this in odin: https://hotfile.com/dl/185684429/de93650/I9300XXELL4_KOR_MULTI_FACTORY.zip.html
I use it everytime i have a brick..
Plus any more info you have would be good. :good:
masterex567 said:
Hmm.
"the bootloader is broken" sounds a bit tough. :/
What caused the bootloop in the first place?
Are you sure you never used another device's PIT?
Try flashing this in odin:
I use it everytime i have a brick..
Plus any more info you have would be good. :good:
Click to expand...
Click to collapse
Thanks for the help, I'm downloading that right now, will post something when i try what you said.
I don't think i've used another device's PIT, but these were the ones i tried: GT-I9300_mx_20120220.pit, GT-I9300_mx_20120322.pit, GT-I9300_mx_20120329.pit, M0_20120220.pit, mx.pit. All of them I found them here at XDA.
Oh and btw, mine is a white 16gb, of that's useful.
Thanks again.
I tried your file, but odin shows the following error:
<ID:0/039> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAELL4_566833_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/039> Odin v.3 engine (ID:39)..
<ID:0/039> File analysis..
<ID:0/039> SetupConnection..
<ID:0/039> Initialzation..
<ID:0/039> Set PIT file..
<ID:0/039> DO NOT TURN OFF TARGET!!
<ID:0/039>
<ID:0/039> Re-Partition operation failed.
<ID:0/039> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
What should I do now?
clarasr said:
I tried your file, but odin shows the following error:
<ID:0/039> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAELL4_566833_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/039> Odin v.3 engine (ID:39)..
<ID:0/039> File analysis..
<ID:0/039> SetupConnection..
<ID:0/039> Initialzation..
<ID:0/039> Set PIT file..
<ID:0/039> DO NOT TURN OFF TARGET!!
<ID:0/039>
<ID:0/039> Re-Partition operation failed.
<ID:0/039> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
What should I do now?
Click to expand...
Click to collapse
If you can still enter download mode can you not flash with stock firmware from samobile?
---------- Post added at 01:26 AM ---------- Previous post was at 01:22 AM ----------
http://forum.xda-developers.com/showthread.php?t=1760683&page=4
see this its broke sorry
NZ_Nitro said:
If you can still enter download mode can you not flash with stock firmware from samobile?
---------- Post added at 01:26 AM ---------- Previous post was at 01:22 AM ----------
http://forum.xda-developers.com/showthread.php?t=1760683&page=4
see this its broke sorry
Click to expand...
Click to collapse
Thanks anyway for your help.
Donate it to adamoutler look in gen thread
Sent from my GT-I9300 using Tapatalk 2
Try go download mode and see if the brand name '' i9300''is there... If yes... Therebis hope.
Sent from my GT-I9300 using xda app-developers app
Send it in to sammy mate they'll replace mb for free its a problem on the board
Sent from my GT-I9300 using XDA Premium HD app
Ausboy 2011 said:
Send it in to sammy mate they'll replace mb for free its a problem on the board
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
+1, If fails to access partitions when flashing, you probably have a fried emmc chip (happened to my SIII LTE and my Nexus One), a motherboard replacement is in order.
Sent from my HTC Desire HD using Tapatalk 2
If brand name '' i9300 '' at download mode is missing, the partition is mess up...
Sent from my GT-I9300 using xda app-developers app
Kamal Rhaiyan said:
If brand name '' i9300 '' at download mode is missing, the partition is mess up...
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yep, it shows
PRODUCT NAME: GT-i9300
CUSTOM BINARY DOWNLOAD: Yes (2 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Do you think they would replace the motherboard even though it says custom??
Yes... They will repaired it... Because it is a hardware issue...as long u have the warranty... Sorry man.. I think u have to send in your phone to the service center.
Sent from my GT-I9300 using xda app-developers app
Kamal Rhaiyan said:
Yes... They will repaired it... Because it is a hardware issue...as long u have the warranty... Sorry man.. I think u have to send in your phone to the service center.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks all you guys for your help
Thread closed on OP's request
Regards
Vatsal,
Forum Moderator.
Hi guys,
I am trying to root my S3, but after installing the drivers and whatnot, I open up Odin, select the pda then plug my phone in (in DL mode) and hit start. now odin can see the phone, and tells me its added, but it just sits on "setup connection" until it times out and says failed...
This is the directions im going off
any help would be gladly taken on board
This is the log from Odin
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305_CWM_Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
You are posting in I9300 Q&A, go here for I9305
besides this, make sure KIES is not running in the background, but I am not familiar with the I9305 itself.
That root is not for your phone if you took the time to read op
slaphead20 said:
That root is not for your phone if you took the time to read op
Click to expand...
Click to collapse
well his log shows: I9305_CWM_Recovery.tar.md5 is valid. not sure though, you are the specialist
its the same situation for anything i try to flash. even following the directions from This thread, in which my mate with the same phone has used.
chrismast said:
You are posting in I9300 Q&A, go here for I9305
Click to expand...
Click to collapse
as I said, maybe try you question in the correct Q&A forum, guess there are people that might be able to help you
can this be moved, or do i just start the thread again?
sorry for the wrong post location, being a similar phone its an easy mistake to make.
Hi All
A friend of mine was using the leaked 4.1.2 firmware and every thing was fine , suddenly the device is stucked at Samsung Logo
Trying to install I9300ZSBLI1 via Odin but i always get a Fail message
Of course tried wiping the device from recovery but there is punch of errors as shown below
Any help ?!
Thanks in advance
Its stock recovery not CWM .
Trying to install I9300ZSBLI1 via Odin but i always get a Fail message
and what where and when would help .
jje
MohamedYousri said:
Hi All
A friend of mine was using the leaked 4.1.2 firmware and every thing was fine , suddenly the device is stucked at Samsung Logo
Trying to install I9300ZSBLI1 via Odin but i always get a Fail message
Of course tried wiping the device from recovery but there is punch of errors as shown below
Any help ?!
Thanks in advance
Click to expand...
Click to collapse
flash via pc odin may it help u
I an using Odin 3.07 for windows but with no luck , i get FAIL immediately
JJEgan said:
Its stock recovery not CWM .
Trying to install I9300ZSBLI1 via Odin but i always get a Fail message
and what where and when would help .
jje
Click to expand...
Click to collapse
You can wipe from stock recovery too. Op try download different rom and try again
Sent from my GT-I9300 using XDA Premium HD app
can a PIT file solve the problem or it will kill phone for ever ?!
Ausboy 2011 said:
You can wipe from stock recovery too. Op try download different rom and try again
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
every time i try to wipe i get the same error .... will try a 1 file ROM for 4.1.2 late but i guess that it will not work and problem is bigger than that
My SGS3 failed in much the same way, would not get past the first boot screen whatever I tried. I was able to get it into download mode with a jig, but could not flash anything to it. Samsung said they would take it back for repair but that would have meant being without it for over a week. Fortunately I'd bought it from Amazon and they were happy to send a replacement with next-day delivery.
Ausboy 2011 said:
You can wipe from stock recovery too. Op try download different rom and try again
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
Yes but with CWM advice would be to format ..
As we still dont know where Odin is failing its the end of the story .
jje
how can i install the custome recovery while the phone is dead ??!!
Odin using 1 file firmware
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> tz.img
<ID:0/013> NAND Write Start!!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<ID:0/013> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
4 files ICS Firmware
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300ZSBLI1_1036303_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300ZSBLI1_1036303_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300ZSBLI1_1036303_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OZS_I9300OZSBLI1_1036303_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> sboot.bin
<ID:0/013> NAND Write Start!!
<ID:0/013> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Damaged Nand replace motherboard .
jje
JJEgan said:
Damaged Nand replace motherboard .
jje
Click to expand...
Click to collapse
is this your final opinion , there is no other chance that i can solve this issue with software tries ?!
any other tricks i shall try ?!
try flashing the correct pit file, but that's your last shot
Glebun said:
try flashing the correct pit file, but that's your last shot
Click to expand...
Click to collapse
tried all PIT files for i9300 alone , with 1 file firmware and with 4 files firmware ICS and JB ,, same problem , PIT file is written succefuly but can't flash the firmware
if it's a dead end and the phone have the eMMC problem , the device is still in warranty but the counter is 3 and system is modified
is there a way to kill the device at all without being able to access the recovery or download mode so i can send it to warranty as this issue is already from samsung and not related to user
MohamedYousri said:
if it's a dead end and the phone have the eMMC problem , the device is still in warranty but the counter is 3 and system is modified
is there a way to kill the device at all without being able to access the recovery or download mode so i can send it to warranty as this issue is already from samsung and not related to user
Click to expand...
Click to collapse
that would be insurance fraud and that's a felony, can't discuss it here
Glebun said:
that would be insurance fraud and that's a felony, can't discuss it here
Click to expand...
Click to collapse
i agree with you if it was my fault and the phone damaged by me , it's already out from Samsung with this problem so we have the right to send it back to them even if we played with some costume ROMs or Root
anyway i guess erase nand flash in Odin will do the job ,, will give it a try the phone is already dead and useless and my frined lost it anyway
MohamedYousri said:
i agree with you if it was my fault and the phone damaged by me , it's already out from Samsung with this problem so we have the right to send it back to them even if we played with some costume ROMs or Root
anyway i guess erase nand flash in Odin will do the job ,, will give it a try the phone is already dead and useless and my frined lost it anyway
Click to expand...
Click to collapse
yeah, you can send it back, but damaging the phone to get warranty is, as mentioned before, fraud.
Hi All :fingers-crossed:
i have Galaxy SII GT-I9100G
i were flashing it with odin and had an error
<ID:0/035> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/035> Odin v.3 engine (ID:35)..
<ID:0/035> File analysis..
<ID:0/035> SetupConnection..
<ID:0/035> Initialzation..
<ID:0/035> Get PIT for mapping..
<ID:0/035> Firmware update start..
<ID:0/035> cache.img
<ID:0/035> NAND Write Start!!
<ID:0/035> factoryfs.img
<ID:0/035> hidden.img
<ID:0/035> MLO
<ID:0/035>
<ID:0/035> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1 )
PLEASE HELP :crying: :crying:
1) Use a proper thread title; 'Help !!!!' does not cut it. It needs to be descriptive, many people won't even look at your thread with the title you have now. Edit it.
2) Find Hopper8's 'Odin troubleshooting' thread stickied in General, and go through as many of the troubleshooting steps as many times as you need to in order to get a successful flash with Odin. However, be careful you're only flashing I9100G firmware, flashing anything else will brick your phone (like the 3 part firmware linked in Hopper's thread which can be useful in some situations, do not flash this as it's for I9100).
Do not come back to this thread and say 'But I've tried blah blah blah blah'. You are the only person who can fix your phone at this point, nobody here can do this for you. And by referring you to that thread, I've given you the tools with which you can get it done.
You're welcome.
can you please send me the thread link
i can't find it
Absolutely not.
Go to the General section, the stickied threads are near the top 'Guide - Troubleshoot a failed Odin flash'.
Keep posting to multiple threads about the same issue & you'll probably find yourself banned. Which means your phone stays busted.
Hello friends.
my phone stopped booting recently. I can't enter recovery, but i can enter download mode. I tried flashing the latest firmware (G965FXXS7CSK4) for my Region which was flashed successfully with no errors in Odin, but still can't boot, just stuck in Samsung Galaxy s9+ Logo.
Any help would be much apreciated.
vipercubic said:
Hello friends.
my phone stopped booting recently. I can't enter recovery, but i can enter download mode. I tried flashing the latest firmware (G965FXXS7CSK4) for my Region which was flashed successfully with no errors in Odin, but still can't boot, just stuck in Samsung Galaxy s9+ Logo.
Any help would be much appreciated.
Click to expand...
Click to collapse
did you flash the CSC or HOME_CSC?
Youdoofus said:
did you flash the CSC or HOME_CSC?
Click to expand...
Click to collapse
I flashed the Home_csc !
vipercubic said:
I flashed the Home_csc !
Click to expand...
Click to collapse
flash the CSC
Youdoofus said:
flash the CSC
Click to expand...
Click to collapse
Thank you for the suggestion. Now i'm getting "Repartition operation failed (I haven't check re-partition). Does that mean i need a pit file too?
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1303)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 7159 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The firmware i tried to flash (which already successfully flased before with home_csc instead) is N960FXXS3CSFC_N960FOXM3CSF9_EUR
vipercubic said:
Thank you for the suggestion. Now i'm getting "Repartition operation failed (I haven't check re-partition). Does that mean i need a pit file too?
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1303)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 7159 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The firmware i tried to flash (which already successfully flased before with home_csc instead) is N960FXXS3CSFC_N960FOXM3CSF9_EUR
Click to expand...
Click to collapse
did you load the pit file in Odin? if so, dont. Flash it without the pit. Go to the advanced tab and uncheck the pit if your version supports it
Youdoofus said:
did you load the pit file in Odin? if so, dont. Flash it without the pit. Go to the advanced tab and uncheck the pit if your version supports it
Click to expand...
Click to collapse
No i haven't load any pit files. I managed to flash after a couple of tries (with the "simple" CSC file) but unfortunatelly i'm in square 0 again.
Phone still not booting, Showing Samsung Galaxy S9+ (30+ minutes stucked there).
vipercubic said:
No i haven't load any pit files. I managed to flash after a couple of tries (with the "simple" CSC file) but unfortunatelly i'm in square 0 again.
Phone still not booting, Showing Samsung Galaxy S9+ (30+ minutes stucked there).
Click to expand...
Click to collapse
so, Odin finished successfully and your phone still wont boot?
vipercubic said:
No i haven't load any pit files. I managed to flash after a couple of tries (with the "simple" CSC file) but unfortunatelly i'm in square 0 again.
Phone still not booting, Showing Samsung Galaxy S9+ (30+ minutes stucked there).
Click to expand...
Click to collapse
Need to repair boot
Youdoofus said:
so, Odin finished successfully and your phone still wont boot?
Click to expand...
Click to collapse
Yes, unfortunatelly. This is odd isn't it?
ZeroXO said:
Need to repair boot
Click to expand...
Click to collapse
From what i understand flashing with odin will flash a new BL so isn't this supposed to fix any boot issues?
I still can't enter recovery though. Download mode still works.
N960FXXS3CSFC_N960FOXM3CSF9_EUR is for galaxy note 9 device, and you have galaxy s9 plus.
Sent from my SM-G965F using Tapatalk
vipercubic said:
Yes, unfortunatelly. This is odd isn't it?
From what i understand flashing with odin will flash a new BL so isn't this supposed to fix any boot issues?
I still can't enter recovery though. Download mode still works.
Click to expand...
Click to collapse
omg man... i just saw this. does the screenshot you posted up say that its flashing the G960 firmware?
edit: your first screenshot shows the 960 and 2nd the 965. you might need to flash the PIT since you flashed the wrong firmware on it
giuresu said:
N960FXXS3CSFC_N960FOXM3CSF9_EUR is for galaxy note 9 device, and you have galaxy s9 plus.
Sent from my SM-G965F using Tapatalk
Click to expand...
Click to collapse
Youdoofus said:
omg man... i just saw this. does the screenshot you posted up say that its flashing the G960 firmware?
edit: your first screenshot shows the 960 and 2nd the 965. you might need to flash the PIT since you flashed the wrong firmware on it
Click to expand...
Click to collapse
God damn it, can't believe i've ****ed up this badly. I'm 90% sure that the N960 didn't flash anyway because it was failing from the begining (screenshot). Not 100% sure Though. Any idea where to find PIT files?
Thank you all for your time, much appreciated. Merry Christmass everyone.
vipercubic said:
God damn it, can't believe i've ****ed up this badly. I'm 90% sure that the N960 didn't flash anyway because it was failing from the beginning (screenshot). Not 100% sure Though. Any idea where to find PIT files?
Thank you all for your time, much appreciated. Merry Christmas everyone.
Click to expand...
Click to collapse
unsure. ill look for ya. S9+ right?
what storage size is your device?
last edit, i promise
https://www.sammobile.com/forum/threads/40925-Files-PIT-S9-S9
Youdoofus said:
unsure. ill look for ya. S9+ right?
what storage size is your device?
last edit, i promise
https://www.sammobile.com/forum/threads/40925-Files-PIT-S9-S9
Click to expand...
Click to collapse
S9+ 64GB
So according to this post, pit files should be part of the firmware? I'll try to unzip .tar files and have a look arround.
vipercubic said:
S9+ 64GB
So according to this post, pit files should be part of the firmware? I'll try to unzip .tar files and have a look arround.
Click to expand...
Click to collapse
yep, that should get ya where ya need to be. Ive flashed the wrong storage size PIT before and it REALLY ticked me off until i flashed the right one and fixed it
How do you repair boot?
madmike_ said:
How do you repair boot?
Click to expand...
Click to collapse
flash firmware in Odin