Related
I am wondering which ones you guys bought for your players (Obviously those screens are too nice to be scratched ). I got the Zagg Invisibleshield on their cyber Monday sale for $8
Same thing for me, same promotion. Now, I hate those Zagg guys.
But the important thing I guess is that the screen protector works well.
I bought a cheap ebay set, used for 2-3 weeks, removed. They scratched too easily. I like it bare! Have nice leather case, hopefully I won't scratch it... or good ones will become available.
tcat007 said:
I bought a cheap ebay set, used for 2-3 weeks, removed. They scratched too easily. I like it bare! Have nice leather case, hopefully I won't scratch it... or good ones will become available.
Click to expand...
Click to collapse
After trying different types of screen protectors for my phone and tablet, I found that it is best to bare it. Screens produced these days are very tough actually, I don't have any scratches on any devices so far.
These days I only get screen protectors to deal with fingerprints... The Moshi screen protectors AT&T carries are great for this. Problem is that since the SGP5 isn't an AT&T phone, I don't get the usual 50% discount on accessories I get.
I had a ZAGG InvisibleShield on my Huawei S7, which was decent, and reminds me I need to eBay that piece of **** tablet. (Whatever you all do - don't buy Huawei products. They've improved build quality a lot, but customer support for their devices SUCKS.)
The SGP5 is a fingerprint/fingersmudge magnet.
I find there are fewer fingerprints bare than with a protector (at least the cheap ones). A bare screen also cleans much easier. I may try one of those matte anti-fingerprint ones. Bare is so smooth and responsive!
tcat007 said:
I find there are fewer fingerprints bare than with a protector (at least the cheap ones). A bare screen also cleans much easier. I may try one of those matte anti-fingerprint ones. Bare is so smooth and responsive!
Click to expand...
Click to collapse
Yeah, the Moshis I had on my Infuse and have on my GSII are matte anti-fingerprint - love em'!
I got on my 2 Galaxy tabs Ghost Armor but on my 2 SGS II i got the Zagg but I will take it off and go with the Ghost Armor, I like it better!!
i got a skinomi screen protector and carbon fiber skin protector. the screen protector works pretty well, the skin is really just for a little more grip.
i had some issues with shipping, but, long story short, they had some great customer service, and they ended up shipping me two.
I have seen a lot of comments about Zagg that the screen protector feels rubbery or sticky to the touch. Is that correct? How about the ghost armor.
At this point, I have not put anything on. I like the look and touch of the screen, and I the only pocket that I would put my SGP 5 in is my shirt pocket. It has a folio case for traveling.
I would like to keep the screen protected, but just don't know what to use that I have not read bad comments about.
I have zagg on 2 of my devices and they were both a little sticky feeling for the first week or so, but as you use it, it irons out to a perfect smooth. I love Zagg and I'll get one for every device I own!
Sent from my YP-G70 using Tapatalk
jhndflpp said:
i got a skinomi screen protector and carbon fiber skin protector. the screen protector works pretty well, the skin is really just for a little more grip.
i had some issues with shipping, but, long story short, they had some great customer service, and they ended up shipping me two.
Click to expand...
Click to collapse
I got a Skinomi screen protector and wood skin for my Archos 70. The skin gave it better grip but after 6 months, the skins small pieces kept falling off. The screen protector though is great. Never coming loose. I had a couple scratches show up on it but after a few minutes they disappeared. Also the bare screen was a finger print magnet but once I go this screen protector on it was much better. Loved Skinomi screen protector so much I ordered one the for my Samsung 5 minutes after I ordered the device itself. Screen protector came before the device so I was able to put it on right away. Looks great, finger prints barely show up, never need to clean off the screen, never got any scratches showing up.
1776 said:
I have seen a lot of comments about Zagg that the screen protector feels rubbery or sticky to the touch. Is that correct?
Click to expand...
Click to collapse
Supposedly the Zagg are made of the same material as the Skinomi. I noticed that it does have a little bit of a rubbery feel which doesn't bother me. It also did have a bit of a sticky feel, but that went away after a while. I thought maybe I got used to the sticky feel but I had one of these on my Archos tablet and the sticky feel went away, then when I got my Samsung and put a skinomi on that I felt the sticky again so it was not that I got use to the sticky feeling, it actually went away (The sticky feeling on my Samsung is now gone). I don't think I'll ever get another mobile device without getting a Skinomi screen (or ZAGG if they happen to be cheaper).
How is the quality, I want a protector for my SGP, too
I had a cheap Ebay one on it, but took it off because it got greasy way too fast. I like it bare, I'm not too worried about scratches. I tried scratching it with an exacto knife and it didn't scratch. I carry it around in this case which protects it very well: http://www.amazon.com/AmazonBasics-...GEOQ/ref=sr_1_1?ie=UTF8&qid=1327694289&sr=8-1
I also have this case on the device, that gives it a good grip and additional protection.
I use an xtreemegaurd. I like it a lot! Easy to install, and I only have like one or two air bubbles, (not on the screen)
I bought a basic TPU
I bought 2 but I lost one, always good to have the film on it
any tips on how to remove bubbles on screen protectors? they're annoying
Remove protector is easiest way. I've been running bare for a month, no scratches yet! Otherwise if you are careful you should be able to get no bubbles. They are usually caused by lint or dust specks. You can try pealing back and using tape to remove the dust, then roll it back down. I have yet to find a protector that feels as good as the raw screen (which seems very durable)
kesongpinoy said:
any tips on how to remove bubbles on screen protectors? they're annoying
Click to expand...
Click to collapse
I am using Stealth Shieldz. They are just like Zagg, but a lot cheaper and come with two. They are like 3 dollars on amazon. Absolutely no air bubbles. It is also a tad bit thinner than zagg I believe. It is a great screen protector. Lifetime warranty. So far so good.
Sent from my YP-G70 using XDA App
Just got my first screen scratch on my new Rezound yesterday and have been kicking myself ever since. I've used screen protectors in the past on my tablets, but I personally didn't like the way they felt. They felt plasticky and cheap, whereas the glass screens were so smooth and premium-feeling.
My question to you, the Internet, is about screen protectors. Which one do you like most? Which one feels most like glass/is least noticeable/etc.?
(I searched, but most of the recommended ones in other threads are not produced for the Rezound yet.)
I havent found any legit ones on ebay yet. I like the rubbery film protectors not the hard plastic ones. My favorite for the Inc1 and 2 was the NakedShield. Those were awesome. Couldnt even tell there was anything on it.
I bought one from ebay by "xtreme guard" and it was awful. Pretty good materials but terrible shipping. I got several replacements from him because he ships them alone in an envelope and they come stuck to the side and rip when taken out. I told him several times and attempted to send him pictures of me opening the envelope and seeing the destroyed product but he didnt care
I have one from verizon that I got when I purchased the phone and it's ok, but I have used the seidio ultimate screen guard on every phone I've had since the Evo 4g on Sprint and I really like the feel of them. It's really clear, goes on easy and doesn't feel sticky. I would recommend them.
http://www.seidioonline.com/htc-rezound-screen-guard-protector-p/spm1htrzd.htm
I like the rubbery kind cause they don't scratch or mar.
I use the Ghost Armor brand.
It's crystal clear.
Smooth but not plastic feel.
Some people talk about orange peel effect, for me I only see it if I hold the phone at extreme angle. I never see it or feel it in actual use.
The Ghost Armor seems to be more finger oil resistant than nakedd or the plastic static screen protectors.
And with Ghost's you get life time replacements for your device.
They also have kiosk in malls, where they do installs and replacements.
Yeah $5 replacements and $20 for initial product and install. Ebay protector costs $2 and does the same thing plus I don't have to stick it in an oven or coat it in water.
anybody find one that covers the whole screen including the camer, LED and light sensor?
I've been using (and loving) Skinomi. Yeah, with that name it sounds like it should be sold in a sex shop, but it's a fantastic screen protector. It feels like the bare glass, is crystal clear, and can be put on easily.
You know, now that I think about it, maybe it SHOULD be sold in a sex shop...
06stang said:
Yeah $5 replacements and $20 for initial product and install. Ebay protector costs $2 and does the same thing plus I don't have to stick it in an oven or coat it in water.
Click to expand...
Click to collapse
Well that's one way to look at it. My previous phone I put the full body Ghost armor on myself, went like 9 months, no case, then it started to peel around the edges got it re-skinned for 5 and it lasted another 18 months until I got this phone.
I tried those static protectors and I just don't like the feel, and they get smudges galore.
E-bay may have something just as good or better but I don't know what it is, and don't have the time to waste buying from a bunch of different places. There's probably a thousand choices on eBay, but I have no clue which is good or if they are even consistent with what they sell. They may be getting screen protectors from several manufacturers.
I'm not certain, but I thought the 5 buck replacement is only if you have it re-installed at a kiosk?
I picked up the clear Halo ones off of Amazon, and am really happy. Don't like the rubbery Zagg ones, and don't like the anti-glare ones as they seem to mess with the clearness of the screen.
I bought the clear Verizon ones when I picked up the phone, and while they are clear, they scratch very easily.
I've had the Halo ones for about a week. They are just as clear, and haven't scratched yet. They fit better than the Verizon, a bit wider so they cover edge to edge, but not quite tall enough. (When you install them, start at the top)
http://www.amazon.com/Halo-Screen-P...ZBEI/ref=sr_1_1?ie=UTF8&qid=1327964467&sr=8-1
so far the Seido ultimate screen guards have satisfied me, as clear as the glass, no distortions at any angle... I do recommend!
Just got a second one from "Clear Freak" on ebay. He sent me one for the wrong phone. So I'm having no luck with eBay protectors. I trimmed it to fit but wouldnt advise it. I do tint all day so it came pretty easy to me
Pretty happy with the one that came with my otterbox. tried the Zagg but didnt get along with that one.
I have the REALOOK Crystal Clear one. works very well and no distortions. fits the front plate perfectly from edge to edge. It covers the capacitive buttons, camera hole, and proximity sensor.
Applied in a steamed bathroom and result had no air bubbles.
http://www.amazon.com/REALOOK-Veriz...rystal/dp/B006PBROPC/ref=cm_cr_pr_product_top
Not a good idea. Had several people call in with water damage on their phones and I had to tell em tough luck. Doesn't matter if it actually has water damage just if the external or internal sticker turns pink
Boxwave
racinwarrior said:
anybody find one that covers the whole screen including the camer, LED and light sensor?
Click to expand...
Click to collapse
I just got in my Boxwave Crystal Clear today and it fits over the entire glass top to bottom with a cutout for the front facing camera. I had one on my Dinc for 2 years and it was great--got very view scratches--and I like the feel on the screen. They are expensive but can be removed, cleaned, and replaced.
mintcookies said:
I have the REALOOK Crystal Clear one. works very well and no distortions. fits the front plate perfectly from edge to edge. It covers the capacitive buttons, camera hole, and proximity sensor.
Applied in a steamed bathroom and result had no air bubbles.
http://www.amazon.com/REALOOK-Veriz...rystal/dp/B006PBROPC/ref=cm_cr_pr_product_top
Click to expand...
Click to collapse
I've had these for about a month, and they're the best. It still feels like you just have the glass on it still, and it really does cover every part of the glass area. You honestly forget there's anything on it.
Sent from my ADR6425LVW using xda premium
I love my ZAGG protector. They're difficult to put on, but it's worth it. Had one for the DInc and it lasted the entire two years until my upgrade, and is still currently on there! I don't get the rubbery feel that others mentioned, mine is smooth as a baby's bottom.
GordoGuapo said:
I love my ZAGG protector. They're difficult to put on, but it's worth it. Had one for the DInc and it lasted the entire two years until my upgrade, and is still currently on there! I don't get the rubbery feel that others mentioned, mine is smooth as a baby's bottom.
Click to expand...
Click to collapse
Press your fingernail into the black area above or below the screen. You will see it is not hard like the bare glass. That small bit of give is what is being described. The static screen protectors don't have that.
username235 said:
I've had these for about a month, and they're the best. It still feels like you just have the glass on it still, and it really does cover every part of the glass area. You honestly forget there's anything on it.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
I agree, REALOOK Screen Protectors are good quality. It covers the entire face, with anti-glare and anti-fingerprint qualities...
how well does stylus work with screen protectors, anyone had good/bad experience?
I am looking at buying anti glare one
i understand that there is 'increase touch sensitivity' mode in settings that can also help?
Well all are bad after time, I mean the pen doesn't slide good and that's why I use tempered glass.
Sent from my SM-N9005 using Tapatalk
I have a mime feather tempered glass and the s pen works just like nothing is there. I'd assume any of the tempered glass covers get the same results.
MJC
i have seen these tempered glass on sale but they all look chunky, are they really much noticeable in terms of weight and thickness?
looks like i might have to get one since i do want to use stylus with no issues
I've got the iloome Flex and love it. Only about .12 mm thick compared to most tempered glass protectors that are around .40-.60mm thick. Zero effect on stylus
Sent from my SM-N900T using Tapatalk
corwest said:
I've got the iloome Flex and love it. Only about .12 mm thick compared to most tempered glass protectors that are around .40-.60mm thick. Zero effect on stylus
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
looks good on amazon.co.uk
does it have anti glare? thats would totally sell to me
Considering that witht the seperate s pen digitizer you can use your pen juat aboce without touching screen protector should have zero effect on it.
bird
I'm using an Anker Xtreme Scratch Defender screen protector and am having no problems with the s pen.
No Worries...
I use amzer shatterproof screen protector on my N3 and am also using the stylus from a quite long time and I have not faced any problem in using it...its working smooth and fine...yes tempered glass screen protector works well but I would say my screen protector is also working really well...
Don't worry about what screen protector you get (except the real rubbery ones/wet apps) whether it be tempered glass or pet when it comes to the s-pen. Get the one you want, try the s-pen out and if it's too sticky replace the tip with the plastic tips included with your phone. The one that's installed out of the box is the rubber tip so it'll stick to pet more and function better with tg. The plastic tip slid easily on both. Personally I liked the rubber on tg because the resistance reminds me of actually writing with a pencil.
You have to look very carefully at the tip of the replacements and you should see a difference between some of them. I believe 3 rubber ones and 2 plastic ones are included in the replacement tips.
My personal recommendation (I've tried the spigen tr, spigen ultraclear pet, 8 dollar ebay TG, and Nillkin H+) is the Nillkin H+ which is about $16 if I remember correctly. Perfect tempered glass screen protector and the price is significantly lower than spigen and iloome(except flex).
Edit: and you shouldn't worry about using increased sensitivity or anything, I personally haven't heard of a case where the screen protector has caused issues.
babyshanks said:
Don't worry about what screen protector you get (except the real rubbery ones/wet apps) whether it be tempered glass or pet when it comes to the s-pen. Get the one you want, try the s-pen out and if it's too sticky replace the tip with the plastic tips included with your phone. The one that's installed out of the box is the rubber tip so it'll stick to pet more and function better with tg. The plastic tip slid easily on both. Personally I liked the rubber on tg because the resistance reminds me of actually writing with a pencil.
You have to look very carefully at the tip of the replacements and you should see a difference between some of them. I believe 3 rubber ones and 2 plastic ones are included in the replacement tips.
My personal recommendation (I've tried the spigen tr, spigen ultraclear pet, 8 dollar ebay TG, and Nillkin H+) is the Nillkin H+ which is about $16 if I remember correctly. Perfect tempered glass screen protector and the price is significantly lower than spigen and iloome(except flex).
Edit: and you shouldn't worry about using increased sensitivity or anything, I personally haven't heard of a case where the screen protector has caused issues.
Click to expand...
Click to collapse
wow i didnt know there were 5 tips and you are right,i just checked the box.
you listed few makes but they are more easily available in US, i am from UK and going to try Invisible Defender - Samsung Galaxy Note 3 Screen Protector http://www.amazon.co.uk/gp/product/...&pf_rd_t=101&pf_rd_p=430153987&pf_rd_i=468294
See how that goes
vadimo said:
wow i didnt know there were 5 tips and you are right,i just checked the box.
you listed few makes but they are more easily available in US, i am from UK and going to try Invisible Defender - Samsung Galaxy Note 3 Screen Protector http://www.amazon.co.uk/gp/product/...&pf_rd_t=101&pf_rd_p=430153987&pf_rd_i=468294
See how that goes
Click to expand...
Click to collapse
Ya a normal PET one will usually do the trick, but on such a beautiful screen the smudge marks which gather more on PET just ruined it for me, not to mention the tackyness. If you ever want to treat yourself pick up this guy (included UK link for you),
http://www.ebay.co.uk/itm/Nillkin-9...ting_LaptopAccessories_RL&hash=item20dc5a7ede
babyshanks said:
Ya a normal PET one will usually do the trick, but on such a beautiful screen the smudge marks which gather more on PET just ruined it for me, not to mention the tackyness. If you ever want to treat yourself pick up this guy (included UK link for you),
http://www.ebay.co.uk/itm/Nillkin-9...ting_LaptopAccessories_RL&hash=item20dc5a7ede
Click to expand...
Click to collapse
babyshanks,
thank you very much, i have cancelled the amazon one and ordered the glass from link you supplied
vadimo said:
babyshanks,
thank you very much, i have cancelled the amazon one and ordered the glass from link you supplied
Click to expand...
Click to collapse
Your welcome, hope your happy with it, I sure am. Best of luck in the installation.
Sent from my SM-N900T using XDA Premium 4 mobile app
I'm using the mime feather light and it's amazing .smoother then stock imo.
The S-Pen does not use the capacitive digitizer and "Increase Touch Sensitivity" will do nothing. If you read up on the way the Wacom digitizer for the S-Pen works, you will see that the digitizer tracks the S-Pen's location above it and S-Pen itself is what signals when contact was made and how much pressure was applied, so the thickness of the glass doesn't matter as long as it is in range of the Wacom digitizer (where the pointer is visible).
I use the crystal clear from spigen and changed the tip of s-pen to plastic one and it works flawlessly.
cereal86 said:
I use the crystal clear from spigen and changed the tip of s-pen to plastic one and it works flawlessly.
Click to expand...
Click to collapse
isn't the tips for the s-pen all plastic.
kms108 said:
isn't the tips for the s-pen all plastic.
Click to expand...
Click to collapse
Nope! You have 3 of rubber and 3 of plastic
cereal86 said:
Nope! You have 3 of rubber and 3 of plastic
Click to expand...
Click to collapse
I did not realize that. Thanks! What is the advantage of the rubberized tips? Just for feel?
Zerolemon 9H Ultra Glass Armor: Tempered Glass Screen Protector
Unboxing:
I received a review unit from Zerolemon. The screen protector was sent in a bubble wrapped package. The packaging on the screen protector itself is thin poster board with plastic cut outs for the various pieces. It came with the screen protector itself, a small micro-fiber cloth and an alcohol wipe.
Installation:
Zerolemon has installation instructions printed on the poster board packaging. I didn’t need them, but for though who do, the instructions don’t make sense at all. Luckily the pictures convey much more than the written instructions do.
I applied the screen protector in my bath-room after I had the hot water running in the shower for about 10 minutes to minimize any dust particles that were in the air. I tried using the micro-fiber cloth to clean the screen of any residual oil and particles. It did a good job getting rid of oily residue, but is horrible at picking up dust, which might be due to the cloth being tiny (2”x2”). Then I used the alcohol wipe to wipe down the screen one more time. That did the trick. It removed the rest of the particles.
After taking a plastic film off the screen protector I placed it on my phone. The great thing about it is that you can move it slightly to get it to fit perfectly then tap the middle of the screen and the screen protector will adhere to the screen like magic! I didn’t have any issues with bubbles.
Initial Impressions:
The screen protector is much thicker than a plastic one. It somewhat hides the home button because the screen protector is thicker than the protruding button. Not really an issue with me because I actually prefer that so I don’t accidentally press the home button when the phone is in my pocket, but it might bother others. Powering on my device and testing the responsiveness of the screen, the first thing I noticed how nice it felt to touch. Feels just like the glass on the phone. With the rounded edges I wasn't able to feel where the screen protector started and ended from edge to edge of the phone.
The screen’s responsiveness was noticeably diminished. All gestures and taps had to be deliberate for the phone to register the touch. I use the S-Pen quite often to create illustrations on the device. For regular navigation using the S-Pen it operated like normal, but I noticed that I had to push harder while doodling on the screen or using the hand writing recognition. Due to the diminished responsiveness I did have to go into “Settings>Controls>Auto-adjust touch sensitivity” and enable that option so that the screen would return to normal.
Viewing angles are comparable to naked screen.
I will update again in about 2 weeks after I’ve had more time to put it through the torture test of life.
Any info on how thick it is, it looks exactly like the same as the MIME Feather Glass. I use the s-pen with the MIME and I didn't have to turn up the sensitivity but it's only .15mm thick.
airmaxx23 said:
Any info on how thick it is, it looks exactly like the same as the MIME Feather Glass. I use the s-pen with the MIME and I didn't have to turn up the sensitivity but it's only .15mm thick.
Click to expand...
Click to collapse
It's 0.3mm according to their website.
I hope to be receiving mine soon and will comment on the touch screen responsiveness as well. I currently use a 0.4mm thick glass screen protector (it started to bubble randomly, so I needed a new one anyways), and haven't noticed any reduction in responsiveness, so hopefully my experience will be able to provide a different experience than the OP (especially as I'm going from glass to glass, while it appears as though OP went from plastic to glass, which in my opinion is an incomparable difference).
I just received my review unit as well. It's very thin and barely noticeable. I'm using it with my ZeroLemon Extended Battery and it fits perfectly under the case. I haven't had screen responsiveness issues as mentioned in the OP.
I'll post pics up a little later.
Sent from my SM-G900V using Tapatalk
received mine zerolemon screen guard today also. Will ihave to pop off the build in screen protector on this zerolemon case I'm using, in order to use the tempered glass protector? thanks
dschoenike
dschoenike said:
received mine zerolemon screen guard today also. Will ihave to pop off the build in screen protector on this zerolemon case I'm using, in order to use the tempered glass protector? thanks
dschoenike
Click to expand...
Click to collapse
The screen protector wasn't built in on my case.
If yours has one built in, then you should probably remove it.
Sent from my SM-G900V using Tapatalk
I got my review unit today and its pretty good. Mouahmong's review is almost spot on. If you know how to apply a screen protector you are good to go. However, if you have never done it before, watch a Youtube video because the instructions shown on the inside of the package are terribly written.
My advice on applying (especially if your house/apartment or wherever you live is dusty) do it after a hot shower. Doing so will let the dust settle.
The screen protector does have somewhat rounded edges so it's not sharp unlike some other cheaper tempered glass screen protectors. However, with a 0.3mm thickness, you won't even be able tell.
I didnt have much of an issue with the home button after applying the screen protector. Some other brands will provide a stick on item to put on top of the home button so its easier to press, but with this screen protector being pretty thin (0.3mm) you wont need it IMO.
Other than that, so far so good. If I find any cons, I'll update this review.
haza12d said:
The screen protector wasn't built in on my case.
If yours has one built in, then you should probably remove it.
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
thanks for the answer. I figured I would probably need to remove it. thanks again for responding.
dschoenike
Hey everyone I haven't received my test piece yet but I was wondering about the link zerolemon provided it doesn't take me anywhere to provide feedback or suggestions.
Sent from my SM-G900A using XDA Premium 4 mobile app
Here are some pics with the Tempered Glass Screen Protector paired with the ZeroLemon Extended Battery/Rugged Case. This thing is very thin. The previous glass screen protector I had installed was too thick and caused the top corners to lift up. No problem here. Fits like a glove.
Installed the zerolemon screen protector a few days ago and ABSOLUTELY LOVE IT with my 10,000 mah battery and rugged case! I never liked screen protectors because I thought they took away the OEM glass feel and clarity. I now admit my past reservations were completely wrong and I will never have my phone screens go naked again! The zerolemon glass screen protector fits like a glove with the 10,000 mah battery and rugged case and I would strongly recommend the protector to everyone who owns the rugged case to give this a shot. Last thing, the cost of this is better than most of the other name brand protectors out there.
How is it in sunlight? Does it glare a lot?
sd97cl said:
How is it in sunlight? Does it glare a lot?
Click to expand...
Click to collapse
Haven't tried it in sunlight but it should glare just as much as the regular glass.
This isn't a anti glare screen protector.
So far it does well in direct sunlight. Minimal glare. Similar to stock naked.
Sent from my SM-N900T using XDA Free mobile app
sd97cl said:
How is it in sunlight? Does it glare a lot?
Click to expand...
Click to collapse
It is the same as the OEM glass screen, no better and no worse. I think the glass protector feels smoother than the OEM screen. Maybe it's because the oleophobic coating was starting to wear off but I swear the new screen protector feels buttery smooth when I swipe my finger or use the s pen.
DarkManX4lf said:
I got my review unit today and its pretty good. Mouahmong's review is almost spot on. If you know how to apply a screen protector you are good to go. However, if you have never done it before, watch a Youtube video because the instructions shown on the inside of the package are terribly written.
My advice on applying (especially if your house/apartment or wherever you live is dusty) do it after a hot shower. Doing so will let the dust settle.
The screen protector does have somewhat rounded edges so it's not sharp unlike some other cheaper tempered glass screen protectors. However, with a 0.3mm thickness, you won't even be able tell.
I didnt have much of an issue with the home button after applying the screen protector. Some other brands will provide a stick on item to put on top of the home button so its easier to press, but with this screen protector being pretty thin (0.3mm) you wont need it IMO.
Other than that, so far so good. If I find any cons, I'll update this review.
Click to expand...
Click to collapse
So your saying to install it after a hot shower as in install the unit on your phone in the bathroom? Ive heard of the method before but didn't quite understand.
xbmoyx said:
So your saying to install it after a hot shower as in install the unit on your phone in the bathroom? Ive heard of the method before but didn't quite understand.
Click to expand...
Click to collapse
People recommend installing in the bathroom because steam from the hot water will prevent dust particles from floating in the air.
Sent from my SM-N900T using XDA Free mobile app
I love it so far. The packaging is nothing fancy but the product is top notch. I previously had the Nillkin tempered glass and this one is identical to it which is a good thing. All the cutouts are perfect. It feels just like the naked screen. The price is very much reasonable unlike those other brands selling them for $20+ and the quality is the same.
Sent from my Galaxy Note 3
I just received my review unit and will update this thread with my review in a few days. I did notice though after installing the screen protector there is a "bubble" in the top portion of the screen right overtop the notification panel and directly under the Samsung logo. I thought maybe I installed it wrong or slightly sideways so I very gently pulled it back up making sure I didn't touch the sticky backing and realigned the glass with the home button and pressed it back down firmly. The "bubble" is still present but a tad smaller then it was originally. I kept rubbing the screen hoping to eliminate the bubble like other brand plastic type screen protectors and no dice. I will give it a few days and hopefully it will work itself out. I hope I didn't somehow get a "defective" glass that wasn't completely flat which is causing this bubble. See attached pic showing the "bubble" and the packaging stating it has "Bubble Free Installation". [emoji53]
xbmoyx said:
I just received my review unit and will update this thread with my review in a few days. I did notice though after installing the screen protector there is a "bubble" in the top portion of the screen right overtop the notification panel and directly under the Samsung logo. I thought maybe I installed it wrong or slightly sideways so I very gently pulled it back up making sure I didn't touch the sticky backing and realigned the glass with the home button and pressed it back down firmly. The "bubble" is still present but a tad smaller then it was originally. I kept rubbing the screen hoping to eliminate the bubble like other brand plastic type screen protectors and no dice. I will give it a few days and hopefully it will work itself out. I hope I didn't somehow get a "defective" glass that wasn't completely flat which is causing this bubble. See attached pic showing the "bubble" and the packaging stating it has "Bubble Free Installation". [emoji53]
View attachment 2863973
View attachment 2863974
Click to expand...
Click to collapse
Mine went on smooth without any bubbles. Maybe you got a bad one?
Sent from my Galaxy Note S5
Hi folks,
I'm used to using TGSP, and I bought one of the OP TGSPs for the 6T, but for now I'm leaving it unopened. I actually like the factory-applied plastic film, except for the fact that it picks up scratches so easily.
Is there a more durable or self-healing plastic that has that same slick feel and edge-to-edge coverage? I'd like to replace my factory one with a similar-but-less-scratchable alternative without adding the thickness of glass and without losing edge to edge coverage.
I've read lots of these threads but there are so many opinions and most of the action is around TGSP.
I'm in the US, so please focus on ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Frankenscript said:
Hi folks,
I'm used to using TGSP, and I bought one of the OP TGSPs for the 6T, but for now I'm leaving it unopened. I actually like the factory-applied plastic film, except for the fact that it picks up scratches so easily.
Is there a more durable or self-healing plastic that has that same slick feel and edge-to-edge coverage? I'd like to replace my factory one with a similar-but-less-scratchable alternative without adding the thickness of glass and without losing edge to edge coverage.
I've read lots of these threads but there are so many opinions and most of the action is around TGSP.
I'm in the US, so please focus one ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Click to expand...
Click to collapse
I couldn't find one like stock so I opted for a glass one mad by SuperShieldz.
I had used them before.
Works pretty well and I'd give it about a 4.5/5.
Frankenscript said:
I'm in the US, so please focus on ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Click to expand...
Click to collapse
Been using the one you posted for a month now and it's great. Perfect fit and even covers a lil bit of extra room at the bottom so if you're using nav gestures you won't be peeling at the bottom of it.
I used to use Armor Suit film protectors exclusively on all of my phones. May want to give them a look. I never had any issues with them at all.
Frankenscript said:
Hi folks,
I'm used to using TGSP, and I bought one of the OP TGSPs for the 6T, but for now I'm leaving it unopened. I actually like the factory-applied plastic film, except for the fact that it picks up scratches so easily.
Is there a more durable or self-healing plastic that has that same slick feel and edge-to-edge coverage? I'd like to replace my factory one with a similar-but-less-scratchable alternative without adding the thickness of glass and without losing edge to edge coverage.
I've read lots of these threads but there are so many opinions and most of the action is around TGSP.
I'm in the US, so please focus on ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Click to expand...
Click to collapse
I'm using that one now. Closest to the stock one. Doesn't scratch easy at all. First try had 3 specks under by earpiece. 2nd attempt I have 1 speck in middle but it's liveable. I would definitely recommend it. The tgsp just blocks the edges. I didn't even have to retain fingerprints
Ok, I ordered it. Will install this weekend. Kinda scared to remove the factory one but it's already scratched after a month, and my phone lives in a case most of the time.
Will report back how it goes. Is it wet apply or dry?
Sent from my ONEPLUS A6013 using Tapatalk
Last night I removed the pre applied protector and put on the IQ shield one. It was an easy wet apply process. Got it on fine though maybe close to a mm too low; after it had mostly dried out by this morning I had a bit of an edge at the bottom where the screen curves. I burnished it down and hope it will stay. The protector is pretty full coverage, with a notch for the camera.
It was easy to work out the few bubbles while everything was wet, and I looked at the phone on edge using light reflections to see bumps to be squeegeed out. As expected there was some distortion while it was still wet, so I just set the phone aside until morning.
Fast forward 10 hours, and the distortion is gone. There is a definite orange peel "microbump" effect on the screen protector surface; hopefully that will diminish as it continues to dry out.
It's also not as slick as the original pre applied protector, at least not yet.
Let's see how it goes and will report back in a few days.
Sent from my ONEPLUS A6013 using Tapatalk
Approaching 48 hours. The IQShield protector is doing well. It feels a bit slicker to my touch than it used to, perhaps due to a slight haze of finger oils after being used for a while, or perhaps because it's fully dry now.
It still has the orange peel ripple effect on the surface. I'm attaching a picture of what a reflection of light looks like on it, so you can get an idea:
View attachment 4696222
The material is soft; if you drag a fingernail across it, it will leave a trail until it squishes back out. This is the "self healing" property. Reminds me of the coating on the screen protector I had on my 3T.
I was hoping for a smoother, "harder" surface with the IQShield, but it is a high quality product. If you are looking for a full coverage plastic screen protector and like the slightly squishy self healing type, this one is a no brainer. Excellent wet apply process and it seems robust. If you are looking for "a replacement for glass, but something that won't break" this probably isn't for you.
I'm going to live with it for a month or two and see how I feel. I may eventually remove it and replace with a glass TGSP.
Frankenscript said:
Approaching 48 hours. The IQShield protector is doing well. It feels a bit slicker to my touch than it used to, perhaps due to a slight haze of finger oils after being used for a while, or perhaps because it's fully dry now.
It still has the orange peel ripple effect on the surface. I'm attaching a picture of what a reflection of light looks like on it, so you can get an idea:
View attachment 4696222
The material is soft; if you drag a fingernail across it, it will leave a trail until it squishes back out. This is the "self healing" property. Reminds me of the coating on the screen protector I had on my 3T.
I was hoping for a smoother, "harder" surface with the IQShield, but it is a high quality product. If you are looking for a full coverage plastic screen protector and like the slightly squishy self healing type, this one is a no brainer. Excellent wet apply process and it seems robust. If you are looking for "a replacement for glass, but something that won't break" this probably isn't for you.
I'm going to live with it for a month or two and see how I feel. I may eventually remove it and replace with a glass TGSP.
Click to expand...
Click to collapse
Thanks for your review/input. I was torn between this or the Skinomi one. I had a TGSP before from Omotion with the oem case and it landed face first and cracked the digitizer because it sat flush with the lip of the case. It was my kinda my fault though because I knew this and was waiting on my Rhinoshield bumper and couldn't wait to slap on my TGSP. Anyways got it fixed and always kinda wanted the orangy look because I never could afford Zaggs years ago [emoji38]
Sent from my ONEPLUS A6013 using Tapatalk
I remember the Zagg protectors! Had one on my DroidX in ~2010. Good product but it absorbed dye from my holster case and got gradually darker in regions of it where it had most contact with the inside of the holster. I sent it back eventually and got a free replacement; good warranty. I hope this IQShield one won't darken...
Plastic protectors need 7 to 10 days to settle down and give a glass like feeling
vegetaleb said:
Plastic protectors need 7 to 10 days to settle down and give a glass like feeling
Click to expand...
Click to collapse
Where did you read that?
hRAQyfb1oz said:
Where did you read that?
Click to expand...
Click to collapse
3 years experience
Couple weeks in now. Really liking the self healing protector. Sure it has a bit of orange peel effect but that doesn't impact use. It has held up well so far.
Sent from my ONEPLUS A6013 using Tapatalk
I will have the wet imak film protection any time now, though I wonder if I apply it or keep the stock one.
For people who applied third party film protection do you recommend it or no difference with stock?
IQshield is self healing and soft squishy not flat like the stock one. I like it after some use.
Sent from my ONEPLUS A6013 using Tapatalk
Prism from dbrand
MrPhilo said:
Prism from dbrand
Click to expand...
Click to collapse
Doesn't fully cover the visible screen area, same as many cheaper protectors.
Im in the same boat as OP.
Really liked the pre-applied screen protector the 6T came with (does Oneplus not sell that one?)
Lasted about 2 months, but I really liked how clear it was.
I ordered the IQ Shield one, and while good, it has the orange skin effect going on that the included didnt have. Any recommended options for clear flim protectors for the 6T?
formicae said:
Doesn't fully cover the visible screen area, same as many cheaper protectors.
Click to expand...
Click to collapse
Yep, put mine on today, it sucks. Doesn't cover the whole screen, makes it look a little grainy, just a crappy product. Yeah maybe it's super strong but what's the point of it makes using the device a poor experience?