Hi its been along time ago .. since ive actually used to post . ive recently installed this rom ( [rom] [28.08.13] myONEdx+ RC3.0 (JB | Sense 4+ Lite) ) about 4 month ago . and recently my desire x started to act strange . ive tried to revert back my self . but with no luck . i have root S-ON and hboot 1.24 ICS . ( used this rom to isntall on ics boot with the option stated by ckpv5 . how to install it to run on desire x but i cant find the right way to revert back so i can recive OTA ,, ive tried to run ICS toolkit with the option to install the recovery image and boot image . after all that its still booting from recovery as where the rom is installed . any help would greatly appriciate ..
check this thread : http://forum.xda-developers.com/showthread.php?t=2210619
ckpv5 said:
check this thread : http://forum.xda-developers.com/showthread.php?t=2210619
Click to expand...
Click to collapse
yes thank you i have this link . but my question is that when i go to hold power button plus volume . its enters the developer mode but it doesnt shows me the recovery like i had previuosly TWRP .. when i move to recovery menu its restarts ( because when i installed the myonedx rom by you . it installed in place of recovery memory so it just follows the normal boot . but when i just hold the power button to start up like any other phone. its just stuck on black screen, and i have to pull the battery . then when i enter recovery and load it it will load the rom and so on . i want to revert back to be able to have TWRP recovery and boot phone normally . . so i want to isntall the recovery and remove the rom . and so on . ,
Just use fastboot flash recovery recovery.img where recovery.img is an ICS TWRP image.
Sent from my HTC Desire X using XDA Premium 4 mobile app
Gonzo. said:
yes thank you i have this link . but my question is that when i go to hold power button plus volume . its enters the developer mode but it doesnt shows me the recovery like i had previuosly TWRP .. when i move to recovery menu its restarts ( because when i installed the myonedx rom by you . it installed in place of recovery memory so it just follows the normal boot . but when i just hold the power button to start up like any other phone. its just stuck on black screen, and i have to pull the battery . then when i enter recovery and load it it will load the rom and so on . i want to revert back to be able to have TWRP recovery and boot phone normally . . so i want to isntall the recovery and remove the rom . and so on . ,
Click to expand...
Click to collapse
See Note no.3.
Basically you need to reinstall the TWRP recovery because you don't have the recovery anymore. So in the link that I provided above, there is a TWRP recovery attached on OP. Use that (it is the same as in the ICShboot_Toolkit folder) then restore your ICS backup.
Notes[/B]
1. Workaround to mount sdcard as there is no PCSC on JB ROM, see : http://forum.xda-developers.com/showpost.php?p=40241468&postcount=214
2. You can use the APM whenever you need to reboot your DX, select reboot to recovery.
3. If you need to go to recovery to do your usual stuff, select reboot to bootloader, connect to PC and open the ICShboot_Toolkit folder and run the Install Recovery.img.bat again. Once completed, you need to reboot to bootloader and install boot.img again with the Install Boot.img.bat
ckpv5 said:
See Note no.3.
Basically you need to reinstall the TWRP recovery because you don't have the recovery anymore. So in the link that I provided above, there is a TWRP recovery attached on OP. Use that (it is the same as in the ICShboot_Toolkit folder) then restore your ICS backup.
Notes[/B]
1. Workaround to mount sdcard as there is no PCSC on JB ROM, see : http://forum.xda-developers.com/showpost.php?p=40241468&postcount=214
2. You can use the APM whenever you need to reboot your DX, select reboot to recovery.
3. If you need to go to recovery to do your usual stuff, select reboot to bootloader, connect to PC and open the ICShboot_Toolkit folder and run the Install Recovery.img.bat again. Once completed, you need to reboot to bootloader and install boot.img again with the Install Boot.img.bat
Click to expand...
Click to collapse
Thanks worked like a charm also installed the your latest rom mysensedx5. running smooth so far . occasionaly have this weird think happening when the phone starts to open diferent apps and such and auto answering the calls . or even when turning on mobile internet /// its just turns on flash light or dialing someone /// weird / is this rom related ??( screen clean and no scratch and not raplaced .)
Can be hardware related... I experienced this as well some time ago (But note that I replaced my screen).
EDIT: I think you are right @ckpv5...
Gonzo. said:
Thanks worked like a charm also installed the your latest rom mysensedx5. running smooth so far . occasionaly have this weird think happening when the phone starts to open diferent apps and such and auto answering the calls . or even when turning on mobile internet /// its just turns on flash light or dialing someone /// weird / is this rom related ( screen clean and no scratch and not raplaced .)
Click to expand...
Click to collapse
It's the kernel bug I think (if it's not hardware problem) ... which kernel that you use ? I recommend the kernel attached in my mySENSEdx5 thread.
ckpv5 said:
It's the kernel bug I think (if it's not hardware problem) ... which kernel that you use ? I recommend the kernel attached in my mySENSEdx5 thread.
Click to expand...
Click to collapse
ive used the one that it is in your thread . Nexus prime
Gonzo. said:
ive used the one that it is in your thread . Nexus prime
Click to expand...
Click to collapse
Never have this problem with this kernel on any of my ROM.
Try the stock one - Boot.img_Installer_RC2.0
If still problem, try other ROM. If all is ok, then make a full wipe and reinstall ROM.
If this still not solve your problem, I'm scare it is hardware related as mentioned by dansou901
ckpv5 said:
Never have this problem with this kernel on any of my ROM.
Try the stock one - Boot.img_Installer_RC2.0
If still problem, try other ROM. If all is ok, then make a full wipe and reinstall ROM.
If this still not solve your problem, I'm scare it is hardware related as mentioned by dansou901
Click to expand...
Click to collapse
see the thing is that a long time ago ive used cynamoge 10 i think ( thats what it was called ) then i tried xpirt rom those two roms worked fine . but when i tried the veryfirst one for desire x made by you it was mysense ( posted )( 28/03/2013 ) i think after that it just occasionally started to act like that . and only recently in october this 2013 its started to occur more frequently . and also i have some sort of dead pixels i think they shine bright blue or yellow on black background ( all around left top corner and right hand side from bottom to top ) and i i dont know how it appeared . never droped it and not even sat on it / maybe its the screen & need replacement? . but anyway im happy with the rom from latest . very nice ) im going to aply the lastcall* fix // (recent calls bug) and that should do for now
Related
Hey.
I have Samsung Tab 10.1 GT-P7510(Wifi version I think), after updating it to official ICS, instaling CWM via Odin, the screen in recovery mode is jumping.
Searched the forum, found the bootloader fix, the recovery stopped jumping, I rooted the devise, flashed new ROM (Revolution something), and every time the screen is turning off it is starting to jump again, the only way of fixing it is to restart the devise until the screen deems again, or instal the stock ROM to fix it permamently, but it sucks.
The only solution that I found on the forum was the bootloader I already installed.
Can any one help a noob pls?
Thank you
I have the same problem and still suffering from it i did not found any material to fix it. Lets see may be some one will help us...
Sent from my GT-P7500
nazim4net said:
I have the same problem and still suffering from it i did not found any material to fix it. Lets see may be some one will help us...
Click to expand...
Click to collapse
It is what is stopping me from rooting my ICS Stock version. CWM load results in rolling recovery screen and fixing that with bootloader results in rolling wake-up screen. Have reloaded HC 3.2 and run the ICS update again to fix it. This has been covered in quite a few other threads, but none of them is fixing Stock ICS rooting... CM10 or equivalent ROMs will remove that problem, but I am still under warranty, and if something happens...
Hey guys, FYI I I had the Rolling problems Recovery and wake! but I recieved my P7510 back from samsung repair, I bricked it....and it came back with factory installed ICS on it I swore I was not going to Root or try ROMs for awhile!
Three days later I had flashed;
Team Win Recovery Project (TWRP) 2.2.2.1 - GT-P7510 HERE via Odin.
Toldo's "Stock ICS roms, rooted, deodexed, zipaligned UELPL" for GT-P7510 aka the WiFi tab from HERE. With no rolling Recovery or from wake!
Then I decided to flash via TWRP, Toldo's JellyBeanRom ICS v7 from HERE then flashed Yoda's Kernel v2.2 from HERE No Rolling anything I love how my Tab is running now!
I have not tried CWM as of yet but try out TWRP, I didn't get any rolling with just TWRP and Factory installed ICS and if you want a good Stock Rooted ICS HERE!
It's just 2 flashes a way it will take less time than troubleshooting and waiting for an answer!
bugs9477 said:
Hey guys, FYI I I had the Rolling problems Recovery and wake! but I recieved my P7510 back from samsung repair, I bricked it....and it came back with factory installed ICS on it I swore I was not going to Root or try ROMs for awhile!
Three days later I had flashed;
Team Win Recovery Project (TWRP) 2.2.2.1 - GT-P7510 HERE via Odin.
Toldo's "Stock ICS roms, rooted, deodexed, zipaligned UELPL" for GT-P7510 aka the WiFi tab from HERE. With no rolling Recovery or from wake!
Then I decided to flash via TWRP, Toldo's JellyBeanRom ICS v7 from HERE then flashed Yoda's Kernel v2.2 from HERE No Rolling anything I love how my Tab is running now!
I have not tried CWM as of yet but try out TWRP, I didn't get any rolling with just TWRP and Factory installed ICS and if you want a good Stock Rooted ICS HERE!
It's just 2 flashes a way it will take less time than troubleshooting and waiting for an answer!
Click to expand...
Click to collapse
Bro i try ur method also but result is still same nothing is cgange. now i desided to keep stock ICS ROM untill dev found a good solution. ...
unfortunately , im having the same problem. I tried "fourth bar revolution" and "jellybean" , same problems. I tried to fix it but it either makes the tablet being not able to start up or either , i lose wifi
Is there a video on the net documenting this problem? Because I really dunno what you're talking about.
-*Slapping you upside the head from my Galaxy Tab 10.1 P7510*-
OTAw said:
Is there a video on the net documenting this problem? Because I really dunno what you're talking about.
-*Slapping you upside the head from my Galaxy Tab 10.1 P7510*-
Click to expand...
Click to collapse
Plz sir check the pic what is happening here....
nazim4net said:
Plz sir check the pic what is happening here....
Click to expand...
Click to collapse
I had the same problem you are having when I first tried installing pershoot's recovery and bootloader for CM10.
Here is how I fixed it:
1. Flash recovery via odin. When tab reboots hold volume down to boot into download mode.
2. Flash bootloader via odin, When tab reboots hold volume down to enter recovery.
3. Wipe cache and davlik, flash ROM.
During this process my tab would get the rolling screen during the Samsung Galaxy Tab 10.1 screen and wouldn't stop after each step if I didn't hold down volume key during reboot.
Now I am on CM10 with no rolling screen and no SOD.
Hope this helps.
---------- Post added at 09:06 AM ---------- Previous post was at 08:58 AM ----------
nitedr said:
I had the same problem you are having when I first tried installing pershoot's recovery and bootloader for CM10.
Here is how I fixed it:
1. Flash recovery via odin. When tab reboots hold volume down to boot into download mode.
2. Flash bootloader via odin, When tab reboots hold volume down to enter recovery.
3. Wipe cache and davlik, flash ROM.
During this process my tab would get the rolling screen during the Samsung Galaxy Tab 10.1 screen and wouldn't stop after each step if I didn't hold down volume key during reboot.
Now I am on CM10 with no rolling screen and no SOD.
Hope this helps.
Click to expand...
Click to collapse
FYI... I flashed the bootloader and the recovery through the PDA slot on odin.
Exactly the same problem here, I tried countless ways but none is working, currently downloading the UK version ICS to see if the same problem will occur or not
EDIT: Same problem as before
What is cousing this problem? Not every one have this but it is pretty common, is it the soft or the hardware?
Trying all the solutions now...
The recovery process described here:
http://www.androidauthority.com/gal...kmod-recovery-5-5-0-4-custom-recovery-102580/
Should install 5.5.0.4, which works for me. Assuming, of course, that you're device is a P7510.
nitedr said:
I had the same problem you are having when I first tried installing pershoot's recovery and bootloader for CM10.
Here is how I fixed it:
1. Flash recovery via odin. When tab reboots hold volume down to boot into download mode.
2. Flash bootloader via odin, When tab reboots hold volume down to enter recovery.
3. Wipe cache and davlik, flash ROM.
During this process my tab would get the rolling screen during the Samsung Galaxy Tab 10.1 screen and wouldn't stop after each step if I didn't hold down volume key during reboot.
Now I am on CM10 with no rolling screen and no SOD.
Hope this helps.
---------- Post added at 09:06 AM ---------- Previous post was at 08:58 AM ----------
FYI... I flashed the bootloader and the recovery through the PDA slot on odin.
Click to expand...
Click to collapse
can you tell us which files ? i tried downloading CM10 , its a .tar.md5 file and the recovery is a file made for recovery ... though in your instructions , you said the way around. I coulnt even update the recovery.tar.md5 of the CM10 on PDA.
Guys we already use all this mathod but nothing we get all is same as usual. ...
Sent from my GT-P7500 using XDA Premium HD app
nazim4net said:
Guys we already use all this mathod but nothing we get all is same as usual. ...
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
The thing is , i get flickers only when i press "lock" or that the screen shuts itself off , after that, if i try pressing on the screen , it flickers. Not sure if everyone is that problem.
ayashifx said:
The thing is , i get flickers only when i press "lock" or that the screen shuts itself off , after that, if i try pressing on the screen , it flickers. Not sure if everyone is that problem.
Click to expand...
Click to collapse
Yes, I have the same problem so I guess everyone does, anyway I'm getting used to rebooting it whenever I need to use it
Anyone tried another recovery program other than CMW here?
ayashifx said:
can you tell us which files ? i tried downloading CM10 , its a .tar.md5 file and the recovery is a file made for recovery ... though in your instructions , you said the way around. I coulnt even update the recovery.tar.md5 of the CM10 on PDA.
Click to expand...
Click to collapse
Go to http://droidbasement.com/galaxy/roms/cm10/p4wifi/
Download and unzip 4.0.4 booatloader ZIP.
Download recovery.tar.md5
I had to play with it a few times to get it to work but I flashed both of them via the PDA slot in odin. I also didn't change the file name in anyway before I flashed them.
This is what i used to fix my rolling screen which rendered my tablet useless, I still get a flicker from time to time when using the tablet in general. I believe this is a problem with the rom and not with the bootloader or recovery.
Found a solution, not the best, but it is working for me.
The problem was in the bootloader, it was trashing the ROMs, so I installed 5.5.4.0 memoriezed the path to the .zip in the recovery mod, flashed stock ICS, flashed recovery, placed the ROM.zip in the general directory on the tablet, booted to recovery.
It was rolling, the path is
Volume Up (Right) - Instal zip
Power - Enter
Power - Choose zip from internat sd card
Volume Down (Left) - ***Go Back***
Volume Down (Left) - is the last file\dir in the list, if you plase only the rom there, you cant miss.
Power (Enter aka install this)
Volume down x5 times to go from no to yes
Power (Enter) Wait to install to complete a few minets, you will see the color change in the flickering ><
Volume Down (Left) - Go Back
Power - Enter
Power - Reboot Now
The new rom installed, working (For me atleast), the recovery is still broken, but if you leave only one .zip file there you can use this path every time.
This is for desperate ppl like me, that none of the solutions above worked for them. It workes on CWM 5.8.X.X too
Hope I helped.
Still waiting for a normal fix
74n4705 said:
Found a solution, not the best, but it is working for me.
The problem was in the bootloader, it was trashing the ROMs, so I installed 5.5.4.0 memoriezed the path to the .zip in the recovery mod, flashed stock ICS, flashed recovery, placed the ROM.zip in the general directory on the tablet, booted to recovery.
It was rolling, the path is
Volume Up (Right) - Instal zip
Power - Enter
Power - Choose zip from internat sd card
Volume Down (Left) - ***Go Back***
Volume Down (Left) - is the last file\dir in the list, if you plase only the rom there, you cant miss.
Power (Enter aka install this)
Volume down x5 times to go from no to yes
Power (Enter) Wait to install to complete a few minets, you will see the color change in the flickering ><
Volume Down (Left) - Go Back
Power - Enter
Power - Reboot Now
The new rom installed, working (For me atleast), the recovery is still broken, but if you leave only one .zip file there you can use this path every time.
This is for desperate ppl like me, that none of the solutions above worked for them. It workes on CWM 5.8.X.X too
Hope I helped.
Still waiting for a normal fix
Click to expand...
Click to collapse
Did you ever know that you're way too awesome XD
Worked like a charm, thank you very much XD
i had this problem since the beginning of CWM 4.0.0.4 and never got it fixed. I have finally fixed it , i did not fixed the CWM flicker but i fixed the flicker when you unlock the screen in any rom, here's my post of the fix :
http://forum.xda-developers.com/showthread.php?p=33684116#post33684116
I installed a rom in my galaxy pocket which is the jellyblast v3 that was working fine for my phone...i saw something in my status bar to update the rom...i updated it, then it went to cwm recovery installed the rom but it always reboots and if i access the cwm recovery it installs the rom again.How can i have my stock rom back?bot my cwm and phone does not work
pls help T.T
Re-flash recovery through fastboot then download stock ROM for your device or even flash your backup (if you have one of course).
Bluezzy said:
Re-flash recovery through fastboot then download stock ROM for your device or even flash your backup (if you have one of course).
Click to expand...
Click to collapse
How can i go to fastboot?my cwm doesnt work and if i connect my phone to my computer i need to press sumthing because im using samsung...but i cant open my phone to press that thing
jrgwapzz said:
How can i go to fastboot?my cwm doesnt work and if i connect my phone to my computer i need to press sumthing because im using samsung...but i cant open my phone to press that thing
Click to expand...
Click to collapse
I don't own that phone I'm Alcatel OT995 but i tried to help you by some logical way.Ask somebody who own phone like you (developer - recommded) .
so i tried to flash my sprint note 3 today, but i encounter a big problem, i installed rom manager then went into recovery mode and now phone is stuck on ..
recovery booting.......
recovery is not seandroid enforcing
set warranty bit: recovery
i cannot get pass this screen, what can i do?
cesar.. said:
so i tried to flash my sprint note 3 today, but i encounter a big problem, i installed rom manager then went into recovery mode and now phone is stuck on ..
recovery booting.......
recovery is not seandroid enforcing
set warranty bit: recovery
i cannot get pass this screen, what can i do?
Click to expand...
Click to collapse
First, pull the battery. Now what version of KitKat was installed on you device before you tried to flash a rom on your device? Next what rom are you trying to flash on the device ? Did you try and install the recovery that comes with the rom manager ? It is way out of date !!! Here is my thread read through it first http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 now reinstall battery then boot into download mode and odin flash the rom you want. Which should be done after you have made a copy of your stock rooted OS. That way you have a backup in case something goes wrong !!!
i pulled battery out then back in pressed home,power,volume down, its asked volume down to cancel , volume up to install rom. i press volume down but does the same all over again..
i have kit kat, and yes i went into recovery mode with rom manager, did not know it was out of date.
ok ill follow your steps jimz and thank you for getting back to me.
cesar.. said:
i pulled battery out then back in pressed home,power,volume down, its asked volume down to cancel , volume up to install rom. i press volume down but does the same all over again..
i have kit kat, and yes i went into recovery mode with rom manager, did not know it was out of date.
ok ill follow your steps jimz and thank you for getting back to me.
Click to expand...
Click to collapse
OK your almost there, after you reinstall the battery. Press the power button, volume down, and menu button at the same time. A new screen will come up then press the volume up button only, now you are in download mode. ( some people call it odin mode it's the place where you flash/install roms in the device) Next bring up odin on your PC then then connect your device via the charging cable. Now click on PDA then open the OS you want flash. Then don't touch anything else and click start.
That was fast and dirty just go back to the thread for more info. Enjoy !!!
jims thanks for helping me trying to get my phone back up and running, can i ask you a question. i want to flash CyanogenMod 12 for my sprint note 3 . can you send me a link of the right C.M. version , im afraid of downloading the wrong version and damaging the phone again.. there are so many links out there it gets confusing. thank you
cesar.. said:
jims thanks for helping me trying to get my phone back up and running, can i ask you a question. i want to flash CyanogenMod 12 for my sprint note 3 . can you send me a link of the right C.M. version , im afraid of downloading the wrong version and damaging the phone again.. there are so many links out there it gets confusing. thank you
Click to expand...
Click to collapse
Here is the link for CM12 that is not a nightly build http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375 and here is the link to the zip file for your device https://s.basketbuild.com/devs/temasek/Samsung Galaxy Note 3 - HLTESPR/CM12 just click download place the zip on your sd card, wipe system, wipe cache and delvik cache and flash through your recovery. ( make sure you have a backup of your stock rooted rom first ) Remember it is CM 12 some features may not work. But if your a CM fan this is the best one out there.
Here is the link to add in the Google apps http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900 I would go with the MINI MODULAR PACKAGE just click on Basketbuild then click on download for the zip file. Place on sd card wipe cache and delvik cache then install the zip file this will give you the basic Google apps. But you can always go with the full Google package that gives you a lot of junk you won't use, which kinda defeats the purpose . Enjoy !!!
im trying to flash with odin but my laptop says it has a trojan virus most sites i get odin from says this... ??
cesar.. said:
im trying to flash with odin but my laptop says it has a trojan virus most sites i get odin from says this... ??
Click to expand...
Click to collapse
Ya, it does that sometimes. You can do a quick scan with your anti virus program. But most of the time that's normal, because your PC does not recognize the program as something you normally use. I use odin v 1.85 it is a little older but very stable here is a link https://mega.co.nz/#!oA5xzTAL!LXoVWB...ZlOMSWdRGVX6Uo this is my mega site no virus there.
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Thanks for quick reply
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
headlessNick said:
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
Click to expand...
Click to collapse
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
shaijuvjohn said:
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
Click to expand...
Click to collapse
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
headlessNick said:
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Click to expand...
Click to collapse
Try YGDP and flash stock and then restore the backup if available.
When you flash the stock rom it will repalce the twrp also. We can easily install twrp through ygdp. Follow the steps.
1. Select your .cpb file and apply
2. YGDP will unzip the cpb file, path may be C:\YLXZGJ\YGDP\DownFiles\8297W (in my system this is the path, please check after unzipping)
3. Check the unzipped folder contents
4. There will be a file named recovery.img
5. Delete the recovery.img file
6. Copy your twrp recovery to the unzipped folder and rename it to recovery.img
7. Click on start button
8. Remove battery from your phone and connect it to the usb
9. It will detect your phone and start flashing
10. Wait for flashing finishes to 100 %
11. Done. Disconnect phone. You flashed stock rom with twrp recovery
12. Copy the backup to memory card and insert it in phone
12. Insert battery and press power button and volume up key, go to twrp recovery, restore your backup and enjoy
---------- Post added at 12:00 PM ---------- Previous post was at 11:56 AM ----------
headlessNick said:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
Click to expand...
Click to collapse
http://www.needrom.com/wp-content/uploads/2014/10/YGDP_Setup_V3.83_Assembly.zip
Try this one, i am using this one on A311.
You need to have these drivers installed in your system - DA USB VCOM Port, PreLoader USB VCOM (Android)
If you have drivers not installed use the below one from the attachment. :victory:
Thanks - Tying...
headlessNick said:
Thanks - Tying...
Click to expand...
Click to collapse
Thanks a lot guys especially
shaijuvjohn said:
shaijuvjohn
Click to expand...
Click to collapse
, I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
headlessNick said:
Thanks a lot guys especially , I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
Click to expand...
Click to collapse
Yup because i already went through all these situations and i know the difficulties. That is why i gave you each steps. Always Happy to HELP. :victory:
didnt worked
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
I hv tried to installed from ygdp stock rom but it stopped in between. The process wont complete, plz help me if u can
Micromax q391
My Micromax canvas q391 not working its just stuck on the Micromax logo n I'm not even able to access the recovery mode n does not have the backup of rom
What can I do to start it up please help
Even I tried to Flash with YGDP but no use. My mobile is not stable suddenly and automatically it disconnects from my system even connected with USB Cable.
..
WHen I open the link a page comes up saying " Needrom do not authorizing, the links referred by another website for download the ROMs.
The link must obligatory be clicked from of Needrom.com
"
What should I do....
same problrm faced
headlessNick said:
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Click to expand...
Click to collapse
i had faced same problem ..
but stay calm .. just download ypdp flash tool .. download stock rom and flash it using ypdp tool ... remember while flashing remove the battery otherwise it will not detect the phone , as my was not detected .. but as soon i removed the battery , it flashed the rom in couple of minutes . and after flashing remember to flash a custom rom as the stock rom gets corrupted causing these issues .. installed darkeness redefined rom and it is woking extremely fast , best rom in my opinion . choise is upon you ,
Hope my message helped you , for any more questions do ask.
boot loop
i have the same problem boot loop but im not able to flash becoz my micromax canvas nitro a311 disconnecting continuously on lap im not able to open recovery mode also help:fingers-crossed:
Hi guys.
I need help ergently.
First i´m sorry if i post in wrong section of the forum.
Now to my problem.
I am trying to root this mobile using odin to flash twrp and then in recovery flash supersu.
I have used google to find guides and even checked here, but no luck, that i have found i follow every step.
So what have i done?
i downloaded twrp (all of them just to be sure, and for xcover 3).
I downloaded odin, the last version.
I downloaded the last version of supersu.
I installed odin and followed a guide where i should put twrp in AP slot in odin i turned my phone in download mode and hit start, it passed and i removed usb cabel and pulled out the battery and tryed to enter recovery mode, but i got a message that says "Recovery is not seandroid enforcing" and then nothing.
I saw a post that says that is because i have the wrong twrp file, ex. if i use twrp for android 4.4 but my system is 5.1 this will happen, so therefore i tryed all twrp.
I have tryed everything i can find, can anyone please help me?
My phone´s modelnumber is SM-G388F and my CSC: G388FOXA1BQC1 (wich i cant find anywhere) and my AP: G388FXXU1BQC2 (also no where to be found with these exact numbers).
Please please help me.
Here you have :
https://updato.com/firmware-archive-select-model?record=B314701624D311E7963AFA163EE8F90B
Good Luck
Teddy Lo said:
Here you have :
https://updato.com/firmware-archive-select-model?record=B314701624D311E7963AFA163EE8F90B
Good Luck
Click to expand...
Click to collapse
That worked, it installed and so on.
But when i install twrp i still get "recovery is seandroid enforcing" when i try to get in to recovery.
But after a second i jump in to andrdoid's own recovery but i cant install supersu from that.
I should ad that after i flashed with odin from your link i flashed the latest twrp, that was correct or did i mess up somewhere?
Hi , flash this trwp recovery with Odin .
https://eu.dl.twrp.me/xcover3ltexx/twrp-3.1.1-0-xcover3ltexx.img.tar.html
After that pull out your battery and do this step:
Press and hold Volume UP key + Home Key
then put battery back on and press and hold Power key also
Release all key when you see Android TWRP Recovery.
Make BackUp if something goes wrong !
Hope it will work for you .
Teddy Lo said:
Hi , flash this trwp recovery with Odin .
https://eu.dl.twrp.me/xcover3ltexx/twrp-3.1.1-0-xcover3ltexx.img.tar.html
After that pull out your battery and do this step:
Press and hold Volume UP key + Home Key
then put battery back on and press and hold Power key also
Release all key when you see Android TWRP Recovery.
Make BackUp if something goes wrong !
Hope it will work for you .
Click to expand...
Click to collapse
Hi.
Thanks for the reply.
I have already tryed twrp 3.1.10, but i tryed with your instructions as well.
But no it did not work, i tryed with auto restart option ticked in odin and without, but with no luck.
Im starting to wonder if it is possible to even root this phone?
I don't have that device to make a test , but probably twrp will not work on Android 5 , try to flash him back to KitKat and then flash the latest twrp recovery.
So if i flash kitkat and everything works well with twrp can i flash lollipop back and still have root?
Or do i need to keep kitkat?
And do you know where to find kitkat for my phone?
Here you can download kitkat , registar for free and click join 0, if you flash to lolipop back you lose Root Rights and also twrp because it will probably overwrite stock recovery from android 5 (Lolipop) .
https://www.sammobile.com/firmwares/galaxy-xcover-3/sm-g388f/NEE/
Someone already posted pre-rooted firmware for your device , but do at your own risk because maybe that firmware will cause problem on your device !
https://forum.xda-developers.com/android/development/pre-rooted-firmware-samsung-sm-g388f-t3231590
szander said:
So if i flash kitkat and everything works well with twrp can i flash lollipop back and still have root?
Or do i need to keep kitkat?
And do you know where to find kitkat for my phone?
Click to expand...
Click to collapse
Teddy Lo said:
Here you can download kitkat , registar for free and click join 0, if you flash to lolipop back you lose Root Rights and also twrp because it will probably overwrite stock recovery from android 5 (Lolipop) .
https://www.sammobile.com/firmwares/galaxy-xcover-3/sm-g388f/NEE/
Someone already posted pre-rooted firmware for your device , but do at your own risk because maybe that firmware will cause problem on your device !
https://forum.xda-developers.com/android/development/pre-rooted-firmware-samsung-sm-g388f-t3231590
Click to expand...
Click to collapse
Hi.
I followed your advice, but it didnt work.
When i flashed 4.4 then it got stuck on samsung logo, so i flashed back to 5.1 and i am now at point 1 again
Any other suggestions?
Hi , once again , try first to enable Enable USB Debugging you have on the internet about that , and try with other Kitkit version. Once you flash go to recovery mode and wipe cache partition .
Hi.
I have had USB debugging checked from start.
But nothing work, not even trying different types of firmware.
I'm on the brink to give up now, nothing I have tryed have worked, can it be unroot able?
My kid will be dissapointed, thanks for all the great advices you have given me.
And if anyone have other thougts of what to do i'm open to try it.
Hi.
Here is the hacked together twrp that works on sm-g388f lollipop 5.1. This is the only version that works, so don't update it. https://forum.xda-developers.com/showpost.php?p=69813173&postcount=135
Rooting can be done by using the method that is provided on Samsung Xcover3 Development thread, by Matt07211 on the first post.
I recommend to read, especially those 3 first post very thoroughly and all the links that are in those posts.
You will find files for rooting, custom kernel and a version of xposed that works on g388f.
There is no custom roms for this device but if you do modifications that can be done with information provided in the developing thread, you'll have a device that has enough of free space, better batterylife, fairly good performance and holds up even in a more rough way of using a phone.
Hi , i have one question , i bought a galaxy xcover 3 from a guy , i was checking up the phone ect , magisk was installed exposed seems also ( i will tell you why ) but both of them have no user interface , ( i can see magisk as com.topjohnwu.magisk) , but there is no magisk app nor manager ( i checked all apps if its repacked ) also the mock app works ( guy used to work as delivery ) so fake gps works but also there is nothing shows xposed is installed ? how can that be possible ? or .. can you delete the app ( magisk and xposed ) after rooting and everything ?