My Xperia P is death , hard brick x2. service sony and other can't repair this.
What wrong ? my friend flash backub (partition) from sony xperia s to xperia p-mine and flash via flash tool. and death.
Jtag and other box can find him.
any solutions ? i know new board can fix it but another helps?
tiestobunio said:
My Xperia P is death , hard brick x2. service sony and other can't repair this.
What wrong ? my friend flash backub (partition) from sony xperia s to xperia p-mine and flash via flash tool. and death.
Jtag and other box can find him.
any solutions ? i know new board can fix it but another helps?
Click to expand...
Click to collapse
With friends like yours there's no need for haters.
this is not answer ...
tiestobunio said:
this is not answer ...
Click to expand...
Click to collapse
The phone is messed up like this compleatley. An other phones partitions flashed for the P is like a death sentence. (like flushing AB+ blood into an 0- patient).
If you are lucky enough a compleate restore could help your phone, altough I don't know if that is possible, if the phone can go into fastboot mode you have a chance. You need flashtool and a stock ftf for your phone. And luck, plenty of it.
JTAG can hard rewrite the NAND but if the NAND itself has errors, you don't stand a chance.
Ken-Shi_Kun said:
The phone is messed up like this compleatley. An other phones partitions flashed for the P is like a death sentence. (like flushing AB+ blood into an 0- patient).
If you are lucky enough a compleate restore could help your phone, altough I don't know if that is possible, if the phone can go into fastboot mode you have a chance. You need flashtool and a stock ftf for your phone. And luck, plenty of it.
JTAG can hard rewrite the NAND but if the NAND itself has errors, you don't stand a chance.
Click to expand...
Click to collapse
Fast button not work .
In service in my city has say JTAG dont reconize my phone.. but i dont understand beacose on my phone is xperia s partitions and flashed 100% so just repleace files from xperia s to xperia p. i dont understand this. i should buy jtag then i know whats going on . any way thanks for your great answer
tiestobunio said:
Fast button not work .
In service in my city has say JTAG dont reconize my phone.. but i dont understand beacose on my phone is xperia s partitions and flashed 100% so just repleace files from xperia s to xperia p. i dont understand this. i should buy jtag then i know whats going on . any way thanks for your great answer
Click to expand...
Click to collapse
Even if the partitions sizes are all ok, it is not certain, that the allocation will be, eveso some partitions held (yes, past now) essential information of the phone itself, like IMEI, MAC adresses etc. To recreate them is somewhere near impossible.
And even bootloader and things like those uses unique resources, based on the phone itself, which files are even needed for flashing the phone via flashtool, because the phone itself is not the same (like the CPU is STEricsson, and S used Qualcomm if I remember correct) so you flashed something to the phone that it couldn't recognize. It is dead. Hope for JTAG but I don't know that XP is supported or not.
Related
Hi
My experia ray is died now
I've flashed " ICS pureness " and work correctly .
then I try to flash baseband , which come with the rom .
the phone reboot then stop working !
No power
No lights ! ( green or blue )
No vibration
not recognize with the laptop
I can't boot with fastboot nor flashmode !
I can see him as a " QHSUSB_DLOAD "
==============
any help ?
any idea ?
please.
hi
u can use wotanserver it ll solve
If can't solve you have to find someone who have octopusbox or other..
wotanserver : It can't descover my phone .
octopusbox : I'm from Syria , here I can't find or bey like this tools
can I make it on my home ?!
thanks
ahmad.omr said:
wotanserver : It can't descover my phone .
octopusbox : I'm from Syria , here I can't find or bey like this tools
can I make it on my home ?!
thanks
Click to expand...
Click to collapse
And you can connect thru Flastools?
Xmasp said:
And you can connect thru Flastools?
Click to expand...
Click to collapse
It can't find my phone !
This happened to me in february with my Xperia X8. The weird thing is I totally killed my phone trying to opening the bootloader, but you say your Ray is dead 'cause you installed Pureness and flashed a baseband; I'm not an expert but I think flashing the baseband messed with the bootloader, of course, if I'm wrong please someone correct me.
I tried to revive my X8 with all methods I found around the web, with no results. The only advice I can give is trying to find a person with Medusa Box and see if he can bring your Ray back to life, but this may be quite hard.
Or... Sending to SONY support, maybe they could fix it, as you didn't touch the bootloader, but if it was already unlocked, then they wouldn't do anything for you.
send it to sony support, if you still have warranty but unlocked bootloader, then they will charge some fees, if you still have warranty and didnt unlocked bootloader, maybe they'll fix it for free, but if you dont have warranty chances are they wont fix it for you.
XrayCharles said:
send it to sony support, if you still have warranty but unlocked bootloader, then they will charge some fees, if you still have warranty and didnt unlocked bootloader, maybe they'll fix it for free, but if you dont have warranty chances are they wont fix it for you.
Click to expand...
Click to collapse
did you try and fix with seus/sus.....if it doesn't won't to work try these instructions: http://forum.xda-developers.com/showthread.php?t=1492805&highlight=unbrick
I think if u flash baseband, the phone should be back to factory reset...
I have flashed via flashtool new baseband on stock rom ics, from .72 to .77
After reboot,all of my apps have gone..just like we buy a new phone...
But i dont know in pureness (custom rom)... is that baseband made the phone to factory reset or not...
I think u should inject ur phone with JTAG.. This somekind of stuff that sony nor samsung have at the customer service...
It used to hardbricked phone
Sent from my ST18i using xda premium
ahmad.omr said:
Hi
My experia ray is died now
I've flashed " ICS pureness " and work correctly .
then I try to flash baseband , which come with the rom .
the phone reboot then stop working !
No power
No lights ! ( green or blue )
No vibration
not recognize with the laptop
I can't boot with fastboot nor flashmode !
I can see him as a " QHSUSB_DLOAD "
==============
any help ?
any idea ?
please.
Click to expand...
Click to collapse
how did you get to this mode?
This mode basically is under qualcomm usb download mode. I'm not sure but you can try to search under htc forum where got lot of powerful dev for this prob. I think you have to install like qualcomm usb driver in order for the phone to be properly detected by the computer. Then you need some kind of qualcomm program in order to use the phone with? probably qms or something? try google for "QHSUSB_DLOAD"
I had the same situation. nothing will help here. flash memory is dead. so in my case I flashed ics then stock rom and it rebooted and same symptoms . so the only way out was to buy broken xperia ray on ebay and change phone's "motherboard"
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
juninhoxps said:
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
Click to expand...
Click to collapse
ok, so u cannot flash back to stock with flashtool?
concerneth iconfa
juninhoxps said:
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
Click to expand...
Click to collapse
can you connect into fastboot or flashmode?!
Looks like someone got a crappy cable.
Try replacing it, my old cable used to crap on me too.
An improper Kernel or even a bootloop should not prevent you from getting into fastboot mode and reflashing.. Pixelado might be right..It could be a faulty cable or a loose connection.. try another cable or another computer maybe to check..
To better understand, tell us, did you follow that root guide that says:
Downgrade kernel to a 4.0.3 one -> use Doomlord exploit, re-upgrade to stock 4.0.4 kernel?
juninhoxps said:
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
Click to expand...
Click to collapse
Download your ROM Stock FTF and Flash on Modo Flashboot with Flashtools.
I follow this method to root my phone.. Its simple and easy to follow..
http://forum.xda-developers.com/showthread.php?t=1701357
if anything goes wrong just go to flashmode(pressing powerbutton+vol key down).. and reflash the stock ftf file..
it doesn't matter your phone get started or not you can still go to the flashmode .. :laugh:
juninhoxps said:
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
Click to expand...
Click to collapse
Hmmmmm...perhaps you might give us more info so everybody can help you out.....
Atleaset give us a proper info like....
1.What version is your XMP (Gingerbread or ICS) & it baseband........
2.Did you unlock your phone bootloader or not.......
3.What kernel did you flash into your phone.....
4.Which tutorial did you use to flash/root your phone........
Look in this: http://forum.xda-developers.com/showthread.php?t=1695514 thread to root your phone with ics
If you want gingerbread back first, just check out the rooting guide in my signature
Sent from my SK17i using xda app-developers app
Hi,
I've get my girlfriend brother's phone to check - so it is bricked. I do not know how he did this. But phone is not turning on, no led light or sth. But it is known on PC as QHSUSB_DLOADER - I do not have drivers for this mode.
I've tested all methods to get it to flash mode for FlashTool, but it is not working.
Any sugestions?
emm
First, can you explain better how the phone bricked??
have you tried flashing http://forum.xda-developers.com/attachment.php?attachmentid=953586&d=1332104415
extract tft and put it into flashtool/frimwares , then flash it..
if it does not work, then your in troubles.. you may need a medusa box to solve it.
Nachospeicys said:
First, can you explain better how the phone bricked??
have you tried flashing http://forum.xda-developers.com/attachment.php?attachmentid=953586&d=1332104415
extract tft and put it into flashtool/frimwares , then flash it..
if it does not work, then your in troubles.. you may need a medusa box to solve it.
Click to expand...
Click to collapse
I do not know how it was bricked, but he said that, the power on button does not work, after phone died, before it his PC doen not recognise phone, my on my PC phone is known as as mentioned before - I do not have drivers for this strange named device
AFAIK, your phone is permanently bricked. It's loader is corrupted which has caused it to go to factory service mode. You have to take it to Sony service center or have an expert JTAG the phone to recover it. BTW, How did he do this?
Have you tried installing the drivers from flashtool folder and connect it in flashmode?
I think it's hardbricked, too, and you have to take it to sony
prime_225 said:
AFAIK, your phone is permanently bricked. It's loader is corrupted which has caused it to go to factory service mode. You have to take it to Sony service center or have an expert JTAG the phone to recover it. BTW, How did he do this?
Click to expand...
Click to collapse
I do not know how he did this ) I've installed proper drivers for WT19i on FlashTool - no way to flash anything.
Expert JTAG? it is some kind of service box or it is special thing that only Sony service have got?
wiewiorcwaniak said:
Hi,
I've get my girlfriend brother's phone to check - so it is bricked. I do not know how he did this. But phone is not turning on, no led light or sth. But it is known on PC as QHSUSB_DLOADER - I do not have drivers for this mode.
I've tested all methods to get it to flash mode for FlashTool, but it is not working.
Any sugestions?
Click to expand...
Click to collapse
Have you tried to connect the phone to pc while holding the volume up button.........a blue led must glow up
If the phone connects .......that means you can flash a kernel by fastboot method
http://forum.xda-developers.com/showthread.php?t=1322827
JTag cable is now only solution for your mobile.
To look for jtag cable Google it and look for a dealer in your region and call, them they will give you right solution.
Don't worry bro your phone will revive with it as I have revived my phone twice
Sent from my LiveWithWalkman using xda app-developers app
Nachospeicys said:
First, can you explain better how the phone bricked??
have you tried flashing http://forum.xda-developers.com/attachment.php?attachmentid=953586&d=1332104415
extract tft and put it into flashtool/frimwares , then flash it..
if it does not work, then your in troubles.. you may need a medusa box to solve it.
Click to expand...
Click to collapse
you are a expert it work
Strange, It is the 1st time to see a bricked xperia 2011 phone!!
Sent from my Xperia Mini using xda app-developers app
I have hard brick Xperia P,
My friend flash backup TA via flashtool from another device (xperia s) to my xperia P...
only blink red light for 0,5 sec ....so Flashmode not working.
HARD BRICK, NOT SOFT BRICK , this is another worlds...
Not working flash mode etc.
Laptop not reconize my phone.
See there:
https://www.youtube.com/watch?v=5IKwD5xXAJI&feature=youtu.be
Problem solved: Just send to Sony Service.
Is the device completely off? Launch PC Companion and select support zone and click "Repair my Phone" or something similar
Is the device on but no screen? Try pressing power + Volume up or down I don't remember I guess it's up, press them upto 1 minute and device will reboot
Sent from my ST25i using Tapatalk
Are you stupid?
READ AGAIN:
My friend flash backup TA via flashtool from another device (xperia s) to my xperia P...
only blink red light for 0,5 sec ....so Flashmode not working.
Click to expand...
Click to collapse
Then reply.
I not amateur about android.... but i dont have this situation about this .
Haha IT SERVES YOU RIGHT! I think such problem was discussed earlier... Feel free to search the forum.
Sent from my LT22i using xda app-developers app
And you write again your stupidity
As if it was not the problem was not solved until the end of the topics
You have serious problems, you keep offending people who didn't manage to help you... Thats why I'm truely happy - in return for your inpoliteness you have got what you deserved to
Now i add move ,problem.
SolveD
U could 1st try this
@tiestobunio
Well the device is screwed. Boot s1 partition has been damaged. As the phone will not boot now restoring original ta is not possible. Using JTAG might restore it but its usually expensive and is not successful
every time (depends on skill of person preforming. )
Ask your friend to pay up. As far as my knowledge goes, apart from JTAG restore is impossible.
Sorry for your loss.
And for the rest of you, don't give advice if your not fully aware of the problem
Sent from my Xperia P using Tapatalk
Ramy.a said:
U could 1st try this
Click to expand...
Click to collapse
He has a problem after flashing rom right?
So a soft brick ....
Read carefully what he writes again and then write.
Well, unless you are the same as the hard brick or soft brick!
Hamza Murad said:
@tiestobunio
Well the device is screwed. Boot s1 partition has been damaged. As the phone will not boot now restoring original ta is not possible. Using JTAG might restore it but its usually expensive and is not successful
every time (depends on skill of person preforming. )
Ask your friend to pay up. As far as my knowledge goes, apart from JTAG restore is impossible.
Sorry for your loss.
And for the rest of you, don't give advice if your not fully aware of the problem
Sent from my Xperia P using Tapatalk
Click to expand...
Click to collapse
Without thinking I gave the phone to the service because here "decent" response does not waited.
Well either by some great miracle they will fix it (don't keep your hopes up) or will return it and say that it's dead and gone.
What exactly did they say when you gave it to them ?
Sent from my Xperia P using Tapatalk
You are screwed. There is a way but it is hard. I have no experience with this method. You must find the testpoint of the phone first though. I do not think anyone knows where is the testpoint.
Sent my Carbonised Xperia P
Problem solved, I gave the phone to the service and they assured me that he would return to live
Good for you.
Its surprising though. They don't do that normally. Which country?
Sent from my Xperia P using Tapatalk
Hamza Murad said:
Good for you.
Its surprising though. They don't do that normally. Which country?
Sent from my Xperia P using Tapatalk
Click to expand...
Click to collapse
Lets see what on the bill when he gets it first
Thread closed at OPs request
Hello,
I tried to flash Lollipop from another Z2's Nandroid backup. But Only thing I got now is blinking red LED when I connect phone to charger or PC (Flashmode and fastboot dead).
All the tricks with buttons I already tried. And after that I dissasembled my Z2 to try pull out battery - nothing.
After that I found out, there is a Testpoint and when I ground it I can connect to PC as SOMC Flash Device but I don't have any SETool stuff and something like that.
I tried to use S1tool from 28.2.2015 but it still doesn't support MSM8974-AB only MSM8974.
Thanks for any advices.
martan777 said:
Hello,
I tried to flash Lollipop from another Z2's Nandroid backup. But Only thing I got now is blinking red LED when I connect phone to charger or PC (Flashmode and fastboot dead).
All the tricks with buttons I already tried. And after that I dissasembled my Z2 to try pull out battery - nothing.
After that I found out, there is a Testpoint and when I ground it I can connect to PC as SOMC Flash Device but I don't have any SETool stuff and something like that.
I tried to use S1tool from 28.2.2015 but it still doesn't support MSM8974-AB only MSM8974.
Thanks for any advices.
Click to expand...
Click to collapse
pc companion repair?
press vol + and power then connect as flsahmode or flashboot with Flashtools?
Nothing, Fastboot and Flashmode are completely dead.
martan777 said:
Nothing, Fastboot and Flashmode are completely dead.
Click to expand...
Click to collapse
Have you tried this
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
myrums said:
Have you tried this
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
Click to expand...
Click to collapse
Yes, phone doesn't react. Tried all buttons tricks even with rubber band on it for all night. Only flashing mode I can achieve is trough testpoint.
z2
hey there m8 : ) ihave the same issue also and believe its not working , but i think i could do some atleast if u help , any idea where is the xperia z2 test point is ? i've seen lots of threads and believe me ALOT and found nothing about the test point from my phone here is the pic btw check it out :
and my last Question is there any model of JTAG boxes that could Fix sony xperia z2 (D6502 ) atm or we should just wait more .
ah come on cant link pic :/ shame is there any pic from z2 test point guys ?
lllldante said:
hey there m8 : ) ihave the same issue also and believe its not working , but i think i could do some atleast if u help , any idea where is the xperia z2 test point is ? i've seen lots of threads and believe me ALOT and found nothing about the test point from my phone here is the pic btw check it out :
and my last Question is there any model of JTAG boxes that could Fix sony xperia z2 (D6502 ) atm or we should just wait more .
ah come on cant link pic :/ shame is there any pic from z2 test point guys ?
Click to expand...
Click to collapse
No idea about the jtag thing but I think this is the test point for the Z2, I connected it to PC and all other points give no change, but this one turns the led off when grounded by touching the metal shields with a paper clip.
If I'm wrong then OP please correct me.
Also am patiently waiting for an update to S1 Tools for our d6503/2, there's plenty of hard bricks qwith unfortunately no solution unlike other Z flagships.
hard brick z2
yep i tested it also and the only change that i could get is just that point that u mentioned , was in city searching for some one to fix my phone he said hes gonna charge me 50 dollar to fix my phone without even opening my phone with heat ( already opened it : / ) , when i asked him whats this about and how could u fix it he said it s a new way that came for z2 and i could get ure boot back up again , hopefully i will go there in 2 or 3 days to see if his right , will let u know if i fixed the phone and hopefully i could ask him about the way that his doing it : )
This is testpoint that works for me.
z2
ah ok
martan777 said:
Hello,
I tried to flash Lollipop from another Z2's Nandroid backup. But Only thing I got now is blinking red LED when I connect phone to charger or PC (Flashmode and fastboot dead).
All the tricks with buttons I already tried. And after that I dissasembled my Z2 to try pull out battery - nothing.
After that I found out, there is a Testpoint and when I ground it I can connect to PC as SOMC Flash Device but I don't have any SETool stuff and something like that.
I tried to use S1tool from 28.2.2015 but it still doesn't support MSM8974-AB only MSM8974.
Thanks for any advices.
Click to expand...
Click to collapse
I had same problem. did you find the solution?
0906 said:
I had same problem. did you find the solution?
Click to expand...
Click to collapse
No, even two services couldn't fix it. Waiting now for new S1tool
Refresh
.
Don't know about Sony repair service, just tried some unofficial services and nothing. All I got is only flashing with testpoint but for this you need some flashing box like Octopus box or SETool. Also exists alternative - S1tool which is free but now works only with Z1 and older models.
refresh
how could restoring another nandroid or carbon rom cause a hard brick?
I don't know. It was 5.0 backup from another Z2 (same model) and i had 4.4.
martan777 said:
This is testpoint that works for me.
Click to expand...
Click to collapse
hello sir .now your mobile alive or not? please tell
me ,i m also in waiting for solution.
the backup you installed had ta partition? flashing another phone's ta partition will brick your device