Hello.
i am a new member at tis forum and this is my first message here
i have RAZR XT910, android ver. 4.0.4 at system ver:
673.94.329.XT910.Retail.en.IL
I know that this is very old version but i want to flash another 4.0.4 version again, i don't need upper version.
The phone is going slowly and get stucked so i want to flash another 4.0.4 again.
I have root at this phone if it's matters.
Can you help me how to do it, or send me links to the specified ROM.
I already have the RSD LITE tool but never did it before alone
Thank you very much!
Idanushi
idanushi said:
Hello.
i am a new member at tis forum and this is my first message here
i have RAZR XT910, android ver. 4.0.4 at system ver:
673.94.329.XT910.Retail.en.IL
I know that this is very old version but i want to flash another 4.0.4 version again, i don't need upper version.
The phone is going slowly and get stucked so i want to flash another 4.0.4 again.
I have root at this phone if it's matters.
Can you help me how to do it, or send me links to the specified ROM.
I already have the RSD LITE tool but never did it before alone
Thank you very much!
Idanushi
Click to expand...
Click to collapse
Then it's easier to do a factory reset,Settings/Backup&Reset/Factory reset/Reset phone...
And you can check Erase SD card to erase your internal storage,to be 100% clean.
But since you are already rooted I'll suggest you to install Safestrap or BMM and try some of Kitkat roms,some of them are really good
Sent from my Razr XT910
Related
Hello XDA community,
So I need help getting my atrix back to its original state. I bought the Atrix when it first came out, and I rooted it right away. Well I found out that wasn't such a great idea because the first root had some problems(For some reason when I gave my the atrix to a family member and took his free upgrade it will no longer let me send texts), I should have waited a month for the fixed root. So I need help on how I can get rid of the root, and get back my original ROM. I think I have a backup of the phone when I first started and here are my current atrix specs:
Current build number: 4.1.2.6
Android version: 2.2.1
Baseband version: N_01.77.05P
Webtop version: OSHWT_U1_4.257.14
Kernel: 2.6.32.9
Current Rom: AdeoInstallerv0.1
Sorry if I am getting something mixed up, kinda a noob at all of this.
+1
Cheapsalsa said:
Hello XDA community,
So I need help getting my atrix back to its original state. I bought the Atrix when it first came out, and I rooted it right away. Well I found out that wasn't such a great idea because the first root had some problems(For some reason when I gave my the atrix to a family member and took his free upgrade it will no longer let me send texts), I should have waited a month for the fixed root. So I need help on how I can get rid of the root, and get back my original ROM. I think I have a backup of the phone when I first started and here are my current atrix specs:
Current build number: 4.1.2.6
Android version: 2.2.1
Baseband version: N_01.77.05P
Webtop version: OSHWT_U1_4.257.14
Kernel: 2.6.32.9
Current Rom: AdeoInstallerv0.1
Sorry if I am getting something mixed up, kinda a noob at all of this.
Click to expand...
Click to collapse
If you have not unlocked the bootloader and installed a custom ROM, you just need to unroot it. Try using Pete's Motorola Root Tools to unroot.
quetzalcoatl2435 said:
If you have not unlocked the bootloader and installed a custom ROM, you just need to unroot it. Try using Pete's Motorola Root Tools to unroot.
Click to expand...
Click to collapse
Thanks.... But I do have a custom ROM installed, I said it was AdeoInstallerv0.1 and I need to know how to get rid of that. It was the first release for the Atrix and its no longer around because of the problems it had. The reason I haven't just gotten rid of it with a backup is because the people who made the first it messed it up some how and I don't want to have a chance of bricking my phone while removing it.
Can I install Clockwork for that ROM to get rid of it?
If I understand this correctly:
1. Adeo was from the times when the bootloader was NOT yet unlocked, which means you still have a LOCKED bootloader.
2. It only works on STOCK 4.1.2.6.
3. In that case, you have to flash stock 4.1.2.6 sbf to return to stock.
I spent my day reading all the threads about rooting the Razr and upgrading to ICS, but with that much information, I am a little confused.
First I rooted my phone using the Motofail Solution:
http://forum.xda-developers.com/showthread.php?t=1342567
Then, and instaled the ClockworkMod using Razr Bootstrapper App:
http://forum.xda-developers.com/showthread.php?t=1347767
Now I want to upgrade my phone to ICS, but the tutorials that I found says that the version of ICS are for one specific version of phone or need a specifIc soluction to flash (like RSD lite)
So, my questions are:
1) Did I really need to upgrade for 2.3.6 before upgrade to ICS. Why?
2) Do someone knows a ROM to upgrade to 2.3.6 and other to upgrade to ICS trough ClockworkMod, that works with my phone version (651.73.250.XT910.Latam.en.01) :fingers-crossed:
3) Is there a way to flash a RSD litle fastboot file on linux?
DuanyDuck said:
I spent my day reading all the threads about rooting the Razr and upgrading to ICS, but with that much information, I am a little confused.
First I rooted my phone using the Motofail Solution:
http://forum.xda-developers.com/showthread.php?t=1342567
Then, and instaled the ClockworkMod using Razr Bootstrapper App:
http://forum.xda-developers.com/showthread.php?t=1347767
Now I want to upgrade my phone to ICS, but the tutorials that I found says that the version of ICS are for one specific version of phone or need a specifIc soluction to flash (like RSD lite)
So, my questions are:
1) Did I really need to upgrade for 2.3.6 before upgrade to ICS. Why?
2) Do someone knows a ROM to upgrade to 2.3.6 and other to upgrade to ICS trough ClockworkMod, that works with my phone version (651.73.250.XT910.Latam.en.01) :fingers-crossed:
3) Is there a way to flash a RSD litle fastboot file on linux?
Click to expand...
Click to collapse
1)
yes, you need to do. ICS is based on the 2.3.6 ROM files via md5 checksums of your current system. this prevents you from flashing some kind of ROM that would brick your whole phone.
2)
i'm not sure which ROM you could choose to do that, but maybe get some nude Retail 2.3.5 ROM... with a branded kind you will not be able to find much / any custom ROM.
just check this to get a working firmware ROM.
why don't you just upgrade to official 2.3.6 and afterwards to official ICS?
3)
man, i don't know... i'm windows user... but just ask google?
ps: official OTA's don't need clockwordmod
The firmware is the answer.
Thanks, Sh4itan for the attention,
That is what I could figure out.
1) The upgrade for 2.3.6 has a firmware on it, so, that´s why I had to upgrade for 2.3.6 before ICS.
2) My phone was a Latam.en.01 version, but I instaled a Latam.br version and worked just fine .
3) I used the RSD solution because I was more confident using a tested solution. So, I still don't know any RSD solution for Linux.
DuanyDuck said:
Thanks, Sh4itan for the attention,
That is what I could figure out.
1) The upgrade for 2.3.6 has a firmware on it, so, that´s why I had to upgrade for 2.3.6 before ICS.
2) My phone was a Latam.en.01 version, but I instaled a Latam.br version and worked just fine .
3) I used the RSD solution because I was more confident using a tested solution. So, I still don't know any RSD solution for Linux.
Click to expand...
Click to collapse
Just download the LATAM ICS Fastboot files and flash them via RSD Lite,It's really that simple.
Those fastboot files are linked at the development section here,use the search bar.
DuanyDuck said:
Thanks, Sh4itan for the attention,
That is what I could figure out.
1) The upgrade for 2.3.6 has a firmware on it, so, that´s why I had to upgrade for 2.3.6 before ICS.
2) My phone was a Latam.en.01 version, but I instaled a Latam.br version and worked just fine .
3) I used the RSD solution because I was more confident using a tested solution. So, I still don't know any RSD solution for Linux.
Click to expand...
Click to collapse
There is a utiluty, in the development section, for linux that you can use to flash .173. But if you have adb installed on your machine you can just flash all the .img through terminal. I beleve the code is /fastboot flash system system.img/ ?fastboot flash boot boot.img/ ect.
Hi guys,
I posted a question similar to this before, but did not get much reply.
I have a chinese Razr, and I would like to install an English stock 4.1.2 onto it. This is mostly because for some reason gapps do not work and I really do want gapps.
I have not flashed phones for two years so I have no idea what everything is. And it seemed like all these requires root. Which is my other problem: I cannot install root on this phone no matter what I try. Someone suggested to me that this was because someone had rooted this phone before in an unconventional way and this locked the phone for any future roots. And when I had updated to 4.0.4 I had lost the root and cannot regain it. I must have tried 20 different methods to root this phone already so I'm pretty sure this is hopeless until I flash a different rom.
In any case, my android version is 4.1.2 and system version is 672.300.384.XT910ChinaRetail.en.CN
And I would like to flash a stock 4.1.2 on it.
Check in the dev forum, you'll find links to the correct gapps for your
version.
Sent from my XT910 using Tapatalk 2
This is the gapps you need : http://www.4shared.com/get/HDGIsCws/update_gms_jb_spyder_r4.html
This is the china 4.12 root tool : http://dl.projectlense.com/download.php?file=spyder/razr_legacy_jbroot_034.zip
This is bmm apk : http://dl.projectlense.com/download.php?file=bmm/com.projectlense.bootmenu.getinfo.apk
What you need to do is simple, root your phone using the legacy jbroot by whirleyes, install the bootmenu manager apk file. Reboot into bootmenu recovery and flash the Gapps R4 package.
Dont thank me !
So I just got a RAZR MAXX running on 4.1.2 Jellybean and found out it was already rooted! So that got me all excited and worked up pretty good! But, i don't know a whole lot about this phone. I am not new to rooting and or/ modding my phone. Ive modded my Droid x2 inside and out but this phone has a lot to worry about on messing up. So i was wanting some help a direction from the community on a couple things (Yes Ive read the forums inside and out on this website on this phone and how to do different things to it, but most are not clear or complicated)
So a few things im needing to know before i do any modding and development to my phone: :laugh:
How to install and flash a ROM properly and how to change between ROMs using SS3.65 (Already got SSv3.65)
How do restore my RAZR if i mess it up back to 4.1.2 on JB using RSDLite? (Got the XML.zip and RSDLite)
What do the ROM Slots do and how to use them in SS3? (Would like to get the RAGE ROM on my RAZR)
Anything I need to be cautious about before Flashing ROMs, SBFing, and or other modifications (Dont wanna brick a new phone...)
Programs i should get? (To flash files and mod the phone? *I got Batmans Utility, SS3, RSDLite, ADB, SDK, Motorola Device Manger)
Like I said I dont know much about this RAZR MAXX of mine and would like some personal guidance from the community! I so GREATLY appericate it! Please if you know anything i could do or help me in anyway, PLEASE reply, all help is needed!
Here is my RAZR MAXXs info:
System Version:
98.72.16.XT912.Verizon.en.US
Android Version:
4.1.2 (JellyBean)
Baseband Version:
CDMA_N_05.21.00R LTEDC_U_09.1D.00
Webtop Version:
wt-3.0.0
Kernal Version:
3.0.8-gbacb1cf
[email protected] #1
Build Number:
9.8.2O-72_VZW-16
Once again, thanks for looking and the community!
RECKLESS PAIN said:
So I just got a RAZR MAXX running on 4.1.2 Jellybean and found out it was already rooted! So that got me all excited and worked up pretty good! But, i don't know a whole lot about this phone. I am not new to rooting and or/ modding my phone. Ive modded my Droid x2 inside and out but this phone has a lot to worry about on messing up. So i was wanting some help a direction from the community on a couple things (Yes Ive read the forums inside and out on this website on this phone and how to do different things to it, but most are not clear or complicated)
So a few things im needing to know before i do any modding and development to my phone: :laugh:
How to install and flash a ROM properly and how to change between ROMs using SS3.65 (Already got SSv3.65)
How do restore my RAZR if i mess it up back to 4.1.2 on JB using RSDLite? (Got the XML.zip and RSDLite)
What do the ROM Slots do and how to use them in SS3? (Would like to get the RAGE ROM on my RAZR)
Anything I need to be cautious about before Flashing ROMs, SBFing, and or other modifications (Dont wanna brick a new phone...)
Programs i should get? (To flash files and mod the phone? *I got Batmans Utility, SS3, RSDLite, ADB, SDK, Motorola Device Manger)
Like I said I dont know much about this RAZR MAXX of mine and would like some personal guidance from the community! I so GREATLY
appericate it! Please if you know anything i could do or help me in anyway, PLEASE reply, all help is needed!
Here is my RAZR MAXXs info:
System Version:
98.72.16.XT912.Verizon.en.US
Android Version:
4.1.2 (JellyBean)
Baseband Version:
CDMA_N_05.21.00R LTEDC_U_09.1D.00
Webtop Version:
wt-3.0.0
Kernal Version:
3.0.8-gbacb1cf
[email protected] #1
Build Number:
9.8.2O-72_VZW-16
Once again, thanks for looking and the community!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2155576
Hello XDA Community
I have a problem with my Motorola XT910
My Droid have the 6.5.1-167_SPU-15-M2 room and the 2.6.35.7-g24431a2 kernel, its android 2.3.6
I would like update the phone to android 4.x with root
First i downloaded the Blur_Version.672.180.41.XT910.Retail.en.EU.zip
than i copie the rom to the sd card and boot from the recovery, but the installation aborded...
What am I doing wrong
second try
i installed RSD Lite with the recassary drivers
The devices is proberly connected.
I would like open the rom with RSD but but i got the xml error message
My question is how can i update my motorola with the 6.5.1-167 to Android 4.x
Excuse me for the question and for my bad english.
i hope you can help me
kaiser12 said:
Hello XDA Community
I have a problem with my Motorola XT910
My Droid have the 6.5.1-167_SPU-15-M2 room and the 2.6.35.7-g24431a2 kernel, its android 2.3.6
I would like update the phone to android 4.x with root
First i downloaded the Blur_Version.672.180.41.XT910.Retail.en.EU.zip
than i copie the rom to the sd card and boot from the recovery, but the installation aborded...
What am I doing wrong
second try
i installed RSD Lite with the recassary drivers
The devices is proberly connected.
I would like open the rom with RSD but but i got the xml error message
My question is how can i update my motorola with the 6.5.1-167 to Android 4.x
Excuse me for the question and for my bad english.
i hope you can help me
Click to expand...
Click to collapse
You can't flash Sbf rom with the phone,you must do it with RSD Lite.
Here http://forum.xda-developers.com/showthread.php?t=3023837 is everything you need...
I suggest that you read a lot before you do something with your phone
Sent from my Razr XT910
kaiser12 said:
Hello XDA Community
I have a problem with my Motorola XT910
My Droid have the 6.5.1-167_SPU-15-M2 room and the 2.6.35.7-g24431a2 kernel, its android 2.3.6
I would like update the phone to android 4.x with root
First i downloaded the Blur_Version.672.180.41.XT910.Retail.en.EU.zip
than i copie the rom to the sd card and boot from the recovery, but the installation aborded...
What am I doing wrong
second try
i installed RSD Lite with the recassary drivers
The devices is proberly connected.
I would like open the rom with RSD but but i got the xml error message
My question is how can i update my motorola with the 6.5.1-167 to Android 4.x
Excuse me for the question and for my bad english.
i hope you can help me
Click to expand...
Click to collapse
That file is an update.zip
It only works if correct stock ROM is installed, and all stock apps are still installed, even then it's not uncommon for install to fail.
To use RSD Lite you need the FXZ(xml.zip) for your Carrier/region.
Sent from my XT1028 using Tapatalk