Related
Hey guys, I bought the Xperia sola phone a couple of weeks ago and everything worked perfectly. After a week I found out that I wanted to root it and flash a new rom(KA02 Xperia SSpeed). At first I only unlocked the bootloader and flashed a rooted kernel. The problem I've been experiencing after that is that it is impossible to activate wifi/hotspot. I always get "Error" when I try.
I've read somewhere that it's pretty common after unlocking the bootloader. Is it any way to fix this?
Thanks in advance,
Doctor X
Copy The Wifi Modules Given In The Zip And Give The Following Permissions
Read Write
1Owner Owner
2Group
3Others
The Name Equals Tick
Use Root Explorer
Hit A Thankxx If It Helped Plezz :angel:
Solar Monster said:
Copy The Wifi Modules Given In The Zip And Give The Following Permissions
Read Write
1Owner Owner
2Group
3Others
The Name Equals Tick
Use Root Explorer
Hit A Thankxx If It Helped Plezz :angel:
Click to expand...
Click to collapse
Which zip?
Anyway, when I first rooted the phone I kept the stock rom and used the "Advanced Stock Kernel" by DooMLoRD. After rooting wifi wouldn't turn on. Now I use the Xperia SSpeed kernel as mentioned in the first post.
It'll be fine for me to flash back the original kernel and relock the bootloader if it will fix the problem.
If anyone has the original image that I can use with fastboot I'd be grateful.
Thanks,
Doctor X
Solar Monster said:
Copy The Wifi Modules Given In The Zip And Give The Following Permissions
Read Write
1Owner Owner
2Group
3Others
The Name Equals Tick
Use Root Explorer
Hit A Thankxx If It Helped Plezz :angel:
Click to expand...
Click to collapse
Okay, I found out what you meant. I used v1 of the kernel actually because I downloaded everything from the XDA hosting thing. I'm using v2 now, but I got a problem with the phone memory. Even if I've erased everything and flashed the SSpeed kernel and rom it says its full. And I don't understand a sh*t.
Okay I got the integrated storage to work again and installed the wifi modules, but now I experience the same problem as before. I just get "Error" when I try to activate wifi.
Anyone?
I got relevant information when I ran dmesg.
[19289.333679] cw1200_load_firmware: can't read config register
[19289.334686] cw1200_wlan: probe of mmc2:0001:1 failed with error -110
Click to expand...
Click to collapse
i 've got an amaze 4g t-mobile recently.it works perfectly.but then,i updated to ICS through OTA...
Everything work fine except Wifi,i cant turn on wifi at all.It only show error when i try to turning on ...
I did search the whole forums,trying everthing i can do..unlock boot loader/rooted/s-off/flash 4EXT recovery/flash many cook rom (android revolution,fastrom,energy rom..),kernel(ruby-faux123 v007/v008/v015/v016..)
finally i reverted back to Stock GB with "PH85IMG_Ruby_TMOUS_1.43.531.3_Radio_1.08.550L.19DC_30.66.550L.08D_release_228638_signed".
but wifi still shows ''error'' at all,when i try to turning on hotspot ,the phone force to reset .
currently:
Stock GB:2.3.4
Sense:3.0
Kernel:2.3.35.13 build 144#1
Baseband:1.08.550L.19DC_30.66.550L.08D
Buildnumber:1.43.531.3
Bootloader unlocked and s-off.
Hoping there is anyone else can understand my bad english and help me .
Since you're s-off try updating back to ics via the most recent file in the stock ruu thread and see if it resolves it.
sent from a smooth place where my fingers trace across the screen to see your face and make you scream!
thanks sir
i try to flashing this kernel into my stock GB:Amaze-EKF-009b-sense.zip
hope it works
ronaldinho_07 said:
thanks sir
i try to flashing this kernel into my stock GB:Amaze-EKF-009b-sense.zip
hope it works
Click to expand...
Click to collapse
Kernel won't change much, but the wifi drivers being present in the kernel just might help, let me know your results.
Dark Nightmare said:
Kernel won't change much, but the wifi drivers being present in the kernel just might help, let me know your results.
Click to expand...
Click to collapse
as you have said,i just flashed the above kernel (Amaze-EKF-009b-sense.zip) into stock GB,but wifi error is still there
after that,i updated to ICS via RUU and flashed this kernel from here : http://forum.xda-developers.com/showthread.php?t=1362759 (at #5)
Nothing changes.
at the first time,i have flashed the Amaze ICS(v015) kernel via 4EXT touch recovery,flashed kernel successfully .
(http://forum.xda-developers.com/showthread.php?t=1359951)
but i think i go wrong somewhere,because the following instruction said:
CWM Flash Instructions: (NO LONGER SUPPORTING CWM METHOD DUE TO HTC's STUPID S-ON UNLOCK!!!)
1. Copy file to SDcard
2. Reboot to CWM recovery
3. Flash the Zip file (if you noticed an error, Flash the same file the 2nd time)
4. Reboot, Done!
i read carefully the second way
Easy Kernel Flasher Instructions:
1. download the above file (via phone directly or to a PC)
2. unzip to a folder then depends on PC or Linux
[ Windows ] open command prompt window and type Flash.bat
[ Linux ] open terminal window and type ./Flash.sh (make sure permission is set to 755 for the Flash.sh)
3. Let the script complete!
,downloaded the kernel,extracted into a folder on my pc.
but i dont see any "Flash.bat'' and dont know how to flash it.
but in the folder that i've just extracted.i found two file:
wl12xx.ko and wl12xx_sdio.ko
putting the whole folder modules into the this kernel (http://forum.xda-developers.com/showthread.php?t=1362759) and run flash.bat...
after flashing,both wifi and bluetooth broken
when i try to turning them on,they turn off instantly
//sorry sir for the bad english
Try to run my AIO tool, which can be found here: http://forum.xda-developers.com/showthread.php?t=1762936
If that doesn't work, more likely than not, it's a hardware issue, as my AIO tool will install a MOSTLY stock RUU with a stock kernel. If that doesn't work, I strongly doubt anything else would work either.
Make sure you follow the directions for the tool.
Keylogger_0 said:
Try to run my AIO tool, which can be found here: http://forum.xda-developers.com/showthread.php?t=1762936
If that doesn't work, more likely than not, it's a hardware issue, as my AIO tool will install a MOSTLY stock RUU with a stock kernel. If that doesn't work, I strongly doubt anything else would work either.
Make sure you follow the directions for the tool.
Click to expand...
Click to collapse
thanks sir,i'll try
btw,i try to flashing faux123-kernel via CWM recovery,but i's aborted
then,i force to flash faux123-kernel via 4EXT touch recovery and succeed
but i still cant turn on wifi,it just says error
can anyone give me an advise,pls
That memory block is probably damaged.
sent from a galaxy you'll never see.
do you think it's related to wifi hardware issues
ronaldinho_07 said:
do you think it's related to wifi hardware issues
Click to expand...
Click to collapse
It could be that as well, did you call tmo and tell em about it?
Dark Nightmare said:
It could be that as well, did you call tmo and tell em about it?
Click to expand...
Click to collapse
i cant do that because i live in vietnam sir
btw,when i was in a custom rom with fraux's kernel.it would just stay in dim grey and say "turning wifi on" and freeze there for a while,then saying "Error''
but,when i tried to copying "wlan12xx.ko,wlan12xx_sdio.ko" from Fraux kernel to Amaze stock kernel modules folder.Flashed it.
then,i turned it on and the wifi turned off itself instantly without saying error
there was wifi error same here :
http://forum.xda-developers.com/showthread.php?t=1796358
thanks for your helps sir :good:
ronaldinho_07 said:
i cant do that because i live in vietnam sir
btw,when i was in a custom rom with fraux's kernel.it would just stay in dim grey and say "turning wifi on" and freeze there for a while,then saying "Error''
but,when i tried to copying "wlan12xx.ko,wlan12xx_sdio.ko" from Fraux kernel to Amaze stock kernel modules folder.Flashed it.
then,i turned it on and the wifi turned off itself instantly without saying error
there was wifi error same here :
http://forum.xda-developers.com/showthread.php?t=1796358
thanks for your helps sir :good:
Click to expand...
Click to collapse
Did you try the fix permissions someone mentioned?
sent from a galaxy you'll never see.
Dark Nightmare said:
Did you try the fix permissions someone mentioned?
sent from a galaxy you'll never see.
Click to expand...
Click to collapse
yes.i did sir
now,i try to reverting to stock GB 2.3.4 again
i've call to a store near my house,they said that if amaze's wifi chip were as same as hd2's wifi chip,the cost would be about $35
ronaldinho_07 said:
yes.i did sir
now,i try to reverting to stock GB 2.3.4 again
i've call to a store near my house,they said that if amaze's wifi chip were as same as hd2's wifi chip,the cost would be about $35
Click to expand...
Click to collapse
Hmmm...doubt it's the same but ill Google the hardware to see if it's replaceable.
sent from a galaxy you'll never see.
Dark Nightmare said:
Did you try the fix permissions someone mentioned?
sent from a galaxy you'll never see.
Click to expand...
Click to collapse
Dark Nightmare said:
Hmmm...doubt it's the same but ill Google the hardware to see if it's replaceable.
sent from a galaxy you'll never see.
Click to expand...
Click to collapse
thanks so much
nice day sir,and i have to go to bed ,it's 3h40 AM in vietnam
//updated.
after flashing many times,problem solved
Necro'd.
Dark Nightmare said:
Hmmm...doubt it's the same but ill Google the hardware to see if it's replaceable.
Click to expand...
Click to collapse
Anyone have any info as to how or where to repair the wifi chip on the amaze? I'm having the same problem and am quite certain that is it hardware issue as the problem started after dropping the phone and without flashing or changing anything, fixing permissions and flashing stock RUU's, kernels, etc of no help. Hoping that something is possible, would be great if it was as simple as a loose ribbon cable...
Dark Nightmare said:
Did you try the fix permissions someone mentioned?
sent from a galaxy you'll never see.
Click to expand...
Click to collapse
Hello,
Here is my situation. I got S-off, SuperCID, unlocked on my HTC amaze unbranded version. Then got ICS stock RUU to run.
The wifi, bluetooth worked fine. However, I have to compile the kernel for this exact version (matched radio, baseband kernel, etc). I downloaded the source from HTCdev (the one with TI WLAN sources), and compiled it. Then I got the zImage repacked so that it can run on the device. Then I see that the wifi, bluetooth shows "error".
The kernel build "readme.txt" located me to the kernel object files such as wl12xx.ko. So I planned to push them in to the device with command "adb push wl12xx.ko /system/lib/modules" but failed. I got super user permission ("adb shell", "su") but still cannot get the kernel objects to the device with adb command. Is there a way to handle this?
My final objective is to get the compiled kernel (with no wifi, bluetooth error) running.
PS. Doesn't actually matter if it is GB or ICS.
Thank you in advance.
spencerjang said:
Hello,
Here is my situation. I got S-off, SuperCID, unlocked on my HTC amaze unbranded version. Then got ICS stock RUU to run.
The wifi, bluetooth worked fine. However, I have to compile the kernel for this exact version (matched radio, baseband kernel, etc). I downloaded the source from HTCdev (the one with TI WLAN sources), and compiled it. Then I got the zImage repacked so that it can run on the device. Then I see that the wifi, bluetooth shows "error".
The kernel build "readme.txt" located me to the kernel object files such as wl12xx.ko. So I planned to push them in to the device with command "adb push wl12xx.ko /system/lib/modules" but failed. I got super user permission ("adb shell", "su") but still cannot get the kernel objects to the device with adb command. Is there a way to handle this?
My final objective is to get the compiled kernel (with no wifi, bluetooth error) running.
PS. Doesn't actually matter if it is GB or ICS.
Thank you in advance.
Click to expand...
Click to collapse
It's easier if you swap the neccesary files with faux kernel zip and flash it from recovery or make your own flashable zip.. That way the modules and zimage get flashed without having to use adb
Sent from my HTC_Amaze_4G using XDA Premium 4 mobile app
ravike14 said:
It's easier if you swap the neccesary files with faux kernel zip and flash it from recovery or make your own flashable zip.. That way the modules and zimage get flashed without having to use adb
Sent from my HTC_Amaze_4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh, I downloaded faux's kernel I believe version 31 (from a dropbox someone linked). and failed to flash from sd card! Any suggestions?
spencerjang said:
Oh, I downloaded faux's kernel I believe version 31 (from a dropbox someone linked). and failed to flash from sd card! Any suggestions?
Click to expand...
Click to collapse
Why it failed? The error?
Sent from my HTC_Amaze_4G using XDA Premium 4 mobile app
Hey guys,
I have tried to upgrade my Micromax A116 to the official update of 4.2 jelly bean. But as soon as i reboot my phone after flashing it using the basic SP tools method, my screen continuously goes on and off. Has anybody else come across this problem? If yes, then can you please share with me the solution? Now i am back to the stock rom of 4.1.2..Any kind of help is appreciated..Thank you..:cyclops: I really want to update it to 4.2.1..
PS: Am i the only one around here who thinks that the stock rom is better than any other custom roms for micromax a116?:laugh:
There are others who reported the same problem. But as of now there doesn't seem to be any solutions as its happening to only some of CHD devices
Thanks
tmohans said:
There are others who reported the same problem. But as of now there doesn't seem to be any solutions as its happening to only some of CHD devices
Click to expand...
Click to collapse
Just wanted to see if I was the only one. Thanks anyway
Possible Solution
1. Don't keep your mobile on auto-brightness.
2. Go to your WiFi and click on it and then hit the menu button on left and then go to advanced option and turn off WiFi optimization.
This will solve your flickering issue.
======================================
or enable Hardware overlay from developer options.
P.S: I am not experiencing any flickering so these steps haven't been tried by me.. try on your own and reply if it helped.:good::fingers-crossed:
I am facing the same problem. I tried hardware overlay and auto brightness but no success. I never tried WiFi though. I had flashed my device more than 10 times now.
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:30 PM ----------
Same problem with my handset as well. So far no resolution.
Sent from my Micromax 6 using xda app-developers app
neatearth said:
I am facing the same problem. I tried hardware overlay and auto brightness but no success. I never tried WiFi though. I had flashed my device more than 10 times now.
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:30 PM ----------
Same problem with my handset as well. So far no resolution.
Sent from my Micromax 6 using xda app-developers app
Click to expand...
Click to collapse
Worth waiting for service center for 4.2 update for your phone. Stop experimenting further and stay on 4.1.2 backup.
WARNING: If you try SP TOOL to flash 4.2 on your phone for some more time, you may LOSE IMEI codes and phone will be literally useless and you need to give it to service center, with a RISK of service rejection coz you rooted it. If you dont know how to unroot and restore stock recovery, you will be in trouble. So keep using 4.1.2 and be safe. Later, dont tell people, no one warned you. Telling you from my own experience.
Should I flash using recovery mode ?
Sent from my Micromax A116 using xda app-developers app
adizrox said:
1. Don't keep your mobile on auto-brightness.
2. Go to your WiFi and click on it and then hit the menu button on left and then go to advanced option and turn off WiFi optimization.
This will solve your flickering issue.
======================================
or enable Hardware overlay from developer options.
P.S: I am not experiencing any flickering so these steps haven't been tried by me.. try on your own and reply if it helped.:good::fingers-crossed:
Click to expand...
Click to collapse
Tried it..but it didn't work.. But thanks anyway
Lyyclec extraneus
cmahendra said:
Worth waiting for service center for 4.2 update for your phone. Stop experimenting further and stay on 4.1.2 backup.
WARNING: If you try SP TOOL to flash 4.2 on your phone for some more time, you may LOSE IMEI codes and phone will be literally useless and you need to give it to service center, with a RISK of service rejection coz you rooted it. If you dont know how to unroot and restore stock recovery, you will be in trouble. So keep using 4.1.2 and be safe. Later, dont tell people, no one warned you. Telling you from my own experience.
Click to expand...
Click to collapse
@cmahendra I have read one of your posts where you have mentioned that you had the same problem(Screen Blinking). Did you manage to get over it? Which method did you try to flash. Please share your experience. It will be quite helpful. At present I am planning to try TWRP recovery to flash. I do not know if it will work.... Will keep update.
Screen Blinking
Hello,
I followed the procedure several times.
this saturday I spent the whole day trying to flash 4.2.1 sotck rom on my phone. But, got the same screen blinking issue.
I've TWRP installed and tried the tweaked Flash-able rom as well as the SP tools flash-able one. but the same issue.
I followed below three routes:
1. Flashed stock rom .16 to make the phone factory state.
2. Then first tried flashing .20 update. Flashed successfully, but the screen started blinking as soon as the phone rebooted, i.e. right when the boot animation starts. I disabled auto brightness as well as disabled HW overlay. but the issue stayed.
3. I again flashed .16 and then 4.2.1 updated rom, first as 'Download' option in SP flash tools, but the same issue occured. I then tried, 'Firmware upgrade' still the same issue.
4. flashed .16 again; flashed TWRP, tried the tweaked zip flash-able rom, but same issue.
5. Tried custom ROM JellyDemon v2.2, the phone was not stuck at bootscreen.
6. in so much of flashing lost IMEI. so, flashed stock .16 again, installed TWRP, extended phone storage to 2.5 GB flashed Jellyxperia 4.1.2 based custom rom, swapped internal storage and then used Mobileuncle MTK toolkit to restore IMEI (I had used the same earlier to backup the IMEI to external SD card.
So, basically I'm back to square one after spending almost 8 hours to get 4.2 update :crying:. If only the blinking screen issue could be fixed :crying:
Sauravh said:
Hello,
I followed the procedure several times.
this saturday I spent the whole day trying to flash 4.2.1 sotck rom on my phone. But, got the same screen blinking issue.
I've TWRP installed and tried the tweaked Flash-able rom as well as the SP tools flash-able one. but the same issue.
I followed below three routes:
1. Flashed stock rom .16 to make the phone factory state.
2. Then first tried flashing .20 update. Flashed successfully, but the screen started blinking as soon as the phone rebooted, i.e. right when the boot animation starts. I disabled auto brightness as well as disabled HW overlay. but the issue stayed.
3. I again flashed .16 and then 4.2.1 updated rom, first as 'Download' option in SP flash tools, but the same issue occured. I then tried, 'Firmware upgrade' still the same issue.
4. flashed .16 again; flashed TWRP, tried the tweaked zip flash-able rom, but same issue.
5. Tried custom ROM JellyDemon v2.2, the phone was not stuck at bootscreen.
6. in so much of flashing lost IMEI. so, flashed stock .16 again, installed TWRP, extended phone storage to 2.5 GB flashed Jellyxperia 4.1.2 based custom rom, swapped internal storage and then used Mobileuncle MTK toolkit to restore IMEI (I had used the same earlier to backup the IMEI to external SD card.
So, basically I'm back to square one after spending almost 8 hours to get 4.2 update :crying:. If only the blinking screen issue could be fixed :crying:
Click to expand...
Click to collapse
I feel you bro.. I also have tried to install the 4.2 update like 3-4 times.. Everytime i get the same issue.. But I haven't occured an issue with any other custom roms.. But I have the same issue with tweaked roms.. GOD HELP US:crying:
hardiktrivedi0612 said:
I feel you bro.. I also have tried to install the 4.2 update like 3-4 times.. Everytime i get the same issue.. But I haven't occured an issue with any other custom roms.. But I have the same issue with tweaked roms.. GOD HELP US:crying:
Click to expand...
Click to collapse
Now, I'm thinking as My phone is less than 30 days old, Should I give it to SVC to upgrade, I'll first flash the stock rom and then give it to svc, So, If they face the blinking issue, may be I could get replacement with updated stock ROM.. But need to find the svc in Noida or nearby
Sauravh said:
Now, I'm thinking as My phone is less than 30 days old, Should I give it to SVC to upgrade, I'll first flash the stock rom and then give it to svc, So, If they face the blinking issue, may be I could get replacement with updated stock ROM.. But need to find the svc in Noida or nearby
Click to expand...
Click to collapse
:laugh::laugh: But make sure that you properly unroot it first and flash .16 stock rom..
hardiktrivedi0612 said:
Hey guys,
I have tried to upgrade my Micromax A116 to the official update of 4.2 jelly bean. But as soon as i reboot my phone after flashing it using the basic SP tools method, my screen continuously goes on and off. Has anybody else come across this problem? If yes, then can you please share with me the solution? Now i am back to the stock rom of 4.1.2..Any kind of help is appreciated..Thank you..:cyclops: I really want to update it to 4.2.1..
PS: Am i the only one around here who thinks that the stock rom is better than any other custom roms for micromax a116?:laugh:
Click to expand...
Click to collapse
tmohans said:
There are others who reported the same problem. But as of now there doesn't seem to be any solutions as its happening to only some of CHD devices
Click to expand...
Click to collapse
neatearth said:
I am facing the same problem. I tried hardware overlay and auto brightness but no success. I never tried WiFi though. I had flashed my device more than 10 times now.
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:30 PM ----------
Same problem with my handset as well. So far no resolution.
Sent from my Micromax 6 using xda app-developers app
Click to expand...
Click to collapse
neatearth said:
@cmahendra I have read one of your posts where you have mentioned that you had the same problem(Screen Blinking). Did you manage to get over it? Which method did you try to flash. Please share your experience. It will be quite helpful. At present I am planning to try TWRP recovery to flash. I do not know if it will work.... Will keep update.
Click to expand...
Click to collapse
Sauravh said:
Hello,
I followed the procedure several times.
this saturday I spent the whole day trying to flash 4.2.1 sotck rom on my phone. But, got the same screen blinking issue.
I've TWRP installed and tried the tweaked Flash-able rom as well as the SP tools flash-able one. but the same issue.
I followed below three routes:
1. Flashed stock rom .16 to make the phone factory state.
2. Then first tried flashing .20 update. Flashed successfully, but the screen started blinking as soon as the phone rebooted, i.e. right when the boot animation starts. I disabled auto brightness as well as disabled HW overlay. but the issue stayed.
3. I again flashed .16 and then 4.2.1 updated rom, first as 'Download' option in SP flash tools, but the same issue occured. I then tried, 'Firmware upgrade' still the same issue.
4. flashed .16 again; flashed TWRP, tried the tweaked zip flash-able rom, but same issue.
5. Tried custom ROM JellyDemon v2.2, the phone was not stuck at bootscreen.
6. in so much of flashing lost IMEI. so, flashed stock .16 again, installed TWRP, extended phone storage to 2.5 GB flashed Jellyxperia 4.1.2 based custom rom, swapped internal storage and then used Mobileuncle MTK toolkit to restore IMEI (I had used the same earlier to backup the IMEI to external SD card.
So, basically I'm back to square one after spending almost 8 hours to get 4.2 update :crying:. If only the blinking screen issue could be fixed :crying:
Click to expand...
Click to collapse
try to flash this file..
this file fixed the issue for some people..
build prop values are stock 4.2
http://d-h.st/L22
hottesthunkkush said:
try to flash this file..
this file fixed the issue for some people..
build prop values are stock 4.2
http://d-h.st/L22
Click to expand...
Click to collapse
Will try it for sure.... Love your work BTW!! keep up the good work:good:
hardiktrivedi0612 said:
Will try it for sure.... Love your work BTW!! keep up the good work:good:
Click to expand...
Click to collapse
Did you try the flickerfix.zip ? Please let me know
---------- Post added at 05:38 AM ---------- Previous post was at 05:30 AM ----------
hottesthunkkush said:
try to flash this file..
this file fixed the issue for some people..
build prop values are stock 4.2
http://d-h.st/L22
Click to expand...
Click to collapse
I am using TWRP and right now on 4.1.2 . Can not upgrade to 4.2 due to blinking issue. Should I flash using flickerfix.zip before upgradation to 4.1 or should do after upgrading to 4.2 ? I will use SP lfash tool to upgrade. I will really appreciate if you can provide a step by step guidance.
thanking you
neatearth said:
Did you try the flickerfix.zip ? Please let me know
Sorry haven't got the time yet.. But will surely let you know when i do.
Click to expand...
Click to collapse
neatearth said:
I am using TWRP and right now on 4.1.2 . Can not upgrade to 4.2 due to blinking issue. Should I flash using flickerfix.zip before upgradation to 4.1 or should do after upgrading to 4.2 ? I will use SP lfash tool to upgrade. I will really appreciate if you can provide a step by step guidance.
thanking you
Click to expand...
Click to collapse
Flash 4.2 First then flickerfix.zip
same situation
Sauravh said:
Hello,
I followed the procedure several times.
this saturday I spent the whole day trying to flash 4.2.1 sotck rom on my phone. But, got the same screen blinking issue.
I've TWRP installed and tried the tweaked Flash-able rom as well as the SP tools flash-able one. but the same issue.
I followed below three routes:
1. Flashed stock rom .16 to make the phone factory state.
2. Then first tried flashing .20 update. Flashed successfully, but the screen started blinking as soon as the phone rebooted, i.e. right when the boot animation starts. I disabled auto brightness as well as disabled HW overlay. but the issue stayed.
3. I again flashed .16 and then 4.2.1 updated rom, first as 'Download' option in SP flash tools, but the same issue occured. I then tried, 'Firmware upgrade' still the same issue.
4. flashed .16 again; flashed TWRP, tried the tweaked zip flash-able rom, but same issue.
5. Tried custom ROM JellyDemon v2.2, the phone was not stuck at bootscreen.
6. in so much of flashing lost IMEI. so, flashed stock .16 again, installed TWRP, extended phone storage to 2.5 GB flashed Jellyxperia 4.1.2 based custom rom, swapped internal storage and then used Mobileuncle MTK toolkit to restore IMEI (I had used the same earlier to backup the IMEI to external SD card.
So, basically I'm back to square one after spending almost 8 hours to get 4.2 update :crying:. If only the blinking screen issue could be fixed :crying:
Click to expand...
Click to collapse
i tried almost everything u tried, now back to stock .16 , all other roms had the screen flickering issue, never tried jellyxperia though, are u using jellyxperia now?? have u found any solution?? is jellyxperia facing the same problem?? thanks
sweetrascal said:
i tried almost everything u tried, now back to stock .16 , all other roms had the screen flickering issue, never tried jellyxperia though, are u using jellyxperia now?? have u found any solution?? is jellyxperia facing the same problem?? thanks
Click to expand...
Click to collapse
I'm using Jellyxperia. it does not have blinking issue as it is based on 4.1.2.
It's faster than stock and I like the Walkman music player. However, I noticed that battery drains faster comparing to stock 4.1.2.
My collegue in office used to play Temple Run Brave during the complete office period with breaks of about 10-20 mins (he was serving notice period ). but the battery used to be at 30-40%.
But yesterday, the battery was down to 10% much before.
However, I would be sure only after a few days usage.
So problem is i cant turn on my wifi..I tried everything i found on internet,even flashed stock firmware and same happens again.
When i go to data/misc/wifi/config i can see mac adress of wifi adapter,but when i go in wifi settings theres no adress.Some galaxy nexus users had same problem as me and they needed to send their phones to service to replace PCB.As we simillar hardware to Gnexus u assume its same problem with mine L9,but i hope someone had same problem and found solution.
Wifi worked till this morning.
Thanks in advance
n0p3zz said:
So problem is i cant turn on my wifi..I tried everything i found on internet,even flashed stock firmware and same happens again.
When i go to data/misc/wifi/config i can see mac adress of wifi adapter,but when i go in wifi settings theres no adress.Some galaxy nexus users had same problem as me and they needed to send their phones to service to replace PCB.As we simillar hardware to Gnexus u assume its same problem with mine L9,but i hope someone had same problem and found solution.
Wifi worked till this morning.
Thanks in advance
Click to expand...
Click to collapse
I got that problem sometime when there're some error occur during phone boot up. Did you try to delete data/misc/wifi folder and then flash stock rom?
artit said:
I got that problem sometime when there're some error occur during phone boot up. Did you try to delete data/misc/wifi folder and then flash stock rom?
Click to expand...
Click to collapse
Deleted few times,flashed stock 2 times and nothing,tried different roms and still mac is unavailable...
Can you tell me one thing,do you have nvram file in system/etc/wifi,mac adress is stored there too.I had simillar problem on friends ZTE Skate,but writing wifi mac in that file solved problem.I dont have that file so i think thats the problem.So if you have it can you upload it(without your mac) and give it to me so i can copy it anbd try that way
n0p3zz said:
Deleted few times,flashed stock 2 times and nothing,tried different roms and still mac is unavailable...
Can you tell me one thing,do you have nvram file in system/etc/wifi,mac adress is stored there too.I had simillar problem on friends ZTE Skate,but writing wifi mac in that file solved problem.I dont have that file so i think thats the problem.So if you have it can you upload it(without your mac) and give it to me so i can copy it anbd try that way
Click to expand...
Click to collapse
I don't have L9 now, it belong to my brother. Maybe some one can help you, if not I'll post it tomorrow.
From my knowledge, in CM rom, wifi MAC is written at boot and it use some function from RIL (baseband) library. Maybe you flash incorrect or incompatible kdz/baseband? But that should not happen with stock rom so I'm not sure what the problem.
Did you try to full wipe your phone? Format /data (delete all files not just wipe it) and remove your sdcard then reboot after flash rom or kdz.
artit said:
I don't have L9 now, it belong to my brother. Maybe some one can help you, if not I'll post it tomorrow.
From my knowledge, in CM rom, wifi MAC is written at boot and it use some function from RIL (baseband) library. Maybe you flash incorrect or incompatible kdz/baseband? But that should not happen with stock rom so I'm not sure what the problem.
Did you try to full wipe your phone? Format /data (delete all files not just wipe it) and remove your sdcard then reboot after flash rom or kdz.
Click to expand...
Click to collapse
I was using CM11 when this happened and i tried reflashing rom,but nothing happened,i restored my original stock rom(one the phone came with) and same thing happens...
Hi,
I installed Cayogenmod 9 on my artix and I have only one issue :
- when screen turns off and it is turned off for a few minutes it won't turn back on. Buttons will light up bit screen wont and if it does it is just a line.
I have to restart the phone so screen would turn back on. Even when someone calls me screeen doesn't turn on.
What shoud I do ?
I allready tried wiping data but it didn't work.
Shoud I install another rom or can I solve this issue.
Link to the rom : http://forum.xda-developers.com/showthread.php?t=2286515
Thanks
Vid
vidra said:
Hi,
I installed Cayogenmod 9 on my artix and I have only one issue :
- when screen turns off and it is turned off for a few minutes it won't turn back on. Buttons will light up bit screen wont and if it does it is just a line.
I have to restart the phone so screen would turn back on. Even when someone calls me screeen doesn't turn on.
What shoud I do ?
I allready tried wiping data but it didn't work.
Shoud I install another rom or can I solve this issue.
Link to the rom : http://forum.xda-developers.com/showthread.php?t=2286515
Thanks
Vid
Click to expand...
Click to collapse
seems 3-panels issues, try to flash one of 3-panels zip file.
Hi,
How do i flash 3-panels zip file and where can I get this 3-panel zip file ( I have no idea what it is ).
Thanks
Vid
thecjan said:
seems 3-panels issues, try to flash one of 3-panels zip file.
Click to expand...
Click to collapse
vidra said:
Hi,
How do i flash 3-panels zip file and where can I get this 3-panel zip file ( I have no idea what it is ).
Thanks
Vid
Click to expand...
Click to collapse
He's referring to the hporch kernels. idk if they were available for CM9 though....
I hava a kernel update but every time I try to install it it fails and I have to reset it (factory data dreset ) in clockwork.
Can I just flash it from recovery ?
vidra said:
I hava a kernel update but every time I try to install it it fails and I have to reset it (factory data dreset ) in clockwork.
Can I just flash it from recovery ?
Click to expand...
Click to collapse
Can you provide the kernel file name and the format of the file (zip or img)?
Sent from my ATRIX HD using XDA Free mobile app