Hi,
My watch won't update.... It reboots in recovery and this is what I get in the recovery log: E:error executing updater binary in zip.....
E:error installing zip file....
Somebody??
Factory recovery? Which update?
I don't know which update.... My watch keeps getting updates and so I install it but it reboots in recovery twrp but it fails. And yeah I just reboot but then after a while I get another update but nothing happens I think....
It will not update with custom recovery. Have to go back stock then flash twrp back on the watch.
liobeir said:
Hi,
My watch won't update.... It reboots in recovery and this is what I get in the recovery log: E:error executing updater binary in zip.....
E:error installing zip file....
Somebody??
Click to expand...
Click to collapse
yup.. i have that problem too..
no custom recovery.. just stock without root..
and it failed to update...
Related
I was updating with the OTA because I was prompted by my phone, and when it went into recovery, I would get an error
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted
What can I do about this?
Don't update, you will lose root therefore any mods on the phone can't be done.
Anyway, it seems your download of the update was damaged, you would need to download it again.
I am new to the flashing rom thing.
Well what happened was....I thought was flashing the viper rom, and I had to use my recovery to unscrew what I didy. Can someone give a short tutorial on flashing roms? I am not a complete **** nugget btw haha.
I loaded the zip file on my SDcard and used the TWRP to flash from zip. Was that wrong?
install error with teamwin recovery.
e:error in /tmp/sideload/package.zip
(status 1)
That is what i got. I read that binary thing was not the updated.
Ive just about tried everything to get my phone to do a system update. When i do try to update it. It starts up Teamwin Recovery and says updated aborted. So i tried to flash the update manually by going to /downloads then trying to flash the OTA Sharp shooter and thats when i get the E:Error in /tmp/sideload/package.zip (status 7) at the end. So if anyone could help would be greatly appreciated.
blupo said:
Ive just about tried everything to get my phone to do a system update. When i do try to update it. It starts up Teamwin Recovery and says updated aborted. So i tried to flash the update manually by going to /downloads then trying to flash the OTA Sharp shooter and thats when i get the E:Error in /tmp/sideload/package.zip (status 7) at the end. So if anyone could help would be greatly appreciated.
Click to expand...
Click to collapse
What do you mean by System Update? What are you on now? Are you trying to flash a ROM? Going to /Downloads and flashing OTA sharp shooter; not sure what you mean by this at all......
blupo said:
Ive just about tried everything to get my phone to do a system update. When i do try to update it. It starts up Teamwin Recovery and says updated aborted. So i tried to flash the update manually by going to /downloads then trying to flash the OTA Sharp shooter and thats when i get the E:Error in /tmp/sideload/package.zip (status 7) at the end. So if anyone could help would be greatly appreciated.
Click to expand...
Click to collapse
A HTC OTA update cannot be flashed using a custom recovery, that is why you are getting the second error. Also a OTA will fail when HBoot attempts to run it when you have a custom recovery installed, that is probably the source of. First error.
Bottom line is that an OTA cannot be installed when you have a custom recovery, so just fine a custom, rooted Rom that is based on the OTA and flash that instead.
all you gotta do is go to recovery try to install it when you get the error pull the battery and go back into recovery from bootloader
Thanks i would make you kool-aid but im fresh out... and that didnt work either
---------- Post added at 12:45 AM ---------- Previous post was at 12:40 AM ----------
Yea i think your right... O well
Hey guys,
I had a similar problem when trying to flash my Nexus s with CyberGR mod.
Tried pretty much everything from trying to wipe system/dalvik/cache/factory reset and also disabled signature check.
Nothing really happened, i kept getting the error again.
Then i had flashed the recovery image (had a TWRP 2.0 running... changed it to CWM) and then the flash went on just fine.
So my guess is that this something to do with the recovery ROM. I would want to ensure that the recovery image used by the dev and mentioned in the install instructions be used.
Hope this helps.
I just reboot recovery and that fixes it when that happens. Have you tried that? No need for battery pull imo
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
vncsalencar said:
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Make sure u are using the latest version of cmw... Most of the status 7 fails have to do with this.
Sent from my GT-I9300 using xda app-developers app
I am using the most updated... and tried with other recoveries but no sign of progress. And I have read some threads with some possible solutions but still stuck... :/
vncsalencar said:
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Try reading the FAQ for philz recovery
Hi!
i got an error when i try to installl this new version Hypermax v8
Finding update package...
Opening update package...
Installing update...
Warning: No file_contexts
Samsung Galaxy S3 GT-I9300
Hypermax
Version 8
Flashing, please wait...
set_metadata_recursive: some changes failed
E: Error in /external_sd/Hypermax v8/Hypermax+v8.zip
(Status 7)
Installation aborted
Also i download V7 and V3... is the same problem.
Thanks for your help!
krathos said:
Hi!
i got an error when i try to installl this new version Hypermax v8
Finding update package...
Opening update package...
Installing update...
Warning: No file_contexts
Samsung Galaxy S3 GT-I9300
Hypermax
Version 8
Flashing, please wait...
set_metadata_recursive: some changes failed
E: Error in /external_sd/Hypermax v8/Hypermax+v8.zip
(Status 7)
Installation aborted
Also i download V7 and V3... is the same problem.
Thanks for your help!
Click to expand...
Click to collapse
Install latest recovery Cwm,PhilZ or Twrp these errors normally happen with outdated recoveries.
Thanks
But did not work.
I installed the last version of CWM but i got the same error
krathos said:
Thanks
But did not work.
I installed the last version of CWM but i got the same error
Click to expand...
Click to collapse
Try PhilZ Touch Recovery, I never use anything else now.
RazorMC said:
Try PhilZ Touch Recovery, I never use anything else now.
Click to expand...
Click to collapse
Thanks!
works fine with Philz Touch 6.19.2
status 7 error
hi there...
i'm having the same problem trying to install Hypermax V9... Always getting the status 7 error..
I've wipe all the data and cache... but still geting the error...
I've install the philz_touch_6.41.6-i9300 and still having problems...
can anyone help me please?