I want to use Stock suddenly, but I've already in Safestrap, installed CM12 in Stock SLot.
Is there any way to install any JB stock firmware without RSD Lite or way that using wipe SD Card?
Sent from my XT910 using XDA Free mobile app
Genie's said:
I want to use Stock suddenly, but I've already in Safestrap, installed CM12 in Stock SLot.
Is there any way to install any JB stock firmware without RSD Lite or way that using wipe SD Card?
Sent from my XT910 using XDA Free mobile app
Click to expand...
Click to collapse
Did you backup stock ROM before installing Rom in Stock slot?
Sent from my XT912 using Tapatalk
Genie's said:
I want to use Stock suddenly, but I've already in Safestrap, installed CM12 in Stock SLot.
Is there any way to install any JB stock firmware without RSD Lite or way that using wipe SD Card?
Sent from my XT910 using XDA Free mobile app
Click to expand...
Click to collapse
It does sound like a sketchy proposition without backing everything up and restoring your phone to factory default with the current stock rom, would it be possible or too much hassle to simply install the stock rom in a new slot instead of replacing what already works in your stock slot? I'm sure there are people who have also flashed new stock roms to the stock slot and re-rooted, I haven't done this myself, but might be worth some google research, either way I don't know how it would be possible to dodge some serious changes to your internal storage unless the work was done in a new slot.
Genie's said:
I want to use Stock suddenly, but I've already in Safestrap, installed CM12 in Stock SLot.
Is there any way to install any JB stock firmware without RSD Lite or way that using wipe SD Card?
Sent from my XT910 using XDA Free mobile app
Click to expand...
Click to collapse
Which system version did you have?
Sent from my XT912 using Tapatalk
---------- Post added at 01:09 AM ---------- Previous post was at 01:06 AM ----------
Zymz said:
It does sound like a sketchy proposition without backing everything up and restoring your phone to factory default with the current stock rom, would it be possible or too much hassle to simply install the stock rom in a new slot instead of replacing what already works in your stock slot? I'm sure there are people who have also flashed new stock roms to the stock slot and re-rooted, I haven't done this myself, but might be worth some google research, either way I don't know how it would be possible to dodge some serious changes to your internal storage unless the work was done in a new slot.
Click to expand...
Click to collapse
You cannot just install stock ROM, on a Rom slot it needs to be modified to a installable zip, or a nandroid backup.
Sent from my XT912 using Tapatalk
sd_shadow said:
You cannot just install stock ROM, on a Rom slot it needs to be modified to a installable zip, or a nandroid backup.
Sent from my XT912 using Tapatalk
Click to expand...
Click to collapse
Ahh that's good to know, I better go backup my Stock rom then I never thought of replacing it since that sort of nullifies the point of safestrap in a way...
Related
Hi,
As the ICS is now available in India I wanted to know if I could install the stock ICS for my S29100 using KIES..
I already had flashed a custom ICS but wanted to install the stock ICS so I do not have any warranty issue also
will is it really safe to use triangle away, I already read about it in this forum:
http://forum.xda-developers.com/showthread.php?t=1494114
but is it really safe?
Yes, you should be safe if you have read it properly and understood what to do. However make a backup all the same.
Sent from my Amazon Kindle Fire using Tapatalk 2
Ok,just one more thing could i go back to my original GB 2.3.6 i now use custom ICS rom.
Sent from my GT-I9100 using XDA
gurjot86 said:
Ok,just one more thing could i go back to my original GB 2.3.6 i now use custom ICS rom.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
yes u can go back to any stock rom of any country
I confirm that it is safe, I already use before. But you can flash stock ROM via Odin, this way is faster than Kies.
I currently use My flashed droid razr with stock ROM 2.3.6, GB. it is flashed to cricket. my first question is, when i use my safe ROM, will i still be on cricket? and my second question is, by wiping data/factory reset, will this delete the files i have on my internal or external memory for my unsafe/stock ROM? please answer back asap! Thanks!
xXVestiXx said:
I currently use My flashed droid razr with stock ROM 2.3.6, GB. it is flashed to cricket. my first question is, when i use my safe ROM, will i still be on cricket? and my second question is, by wiping data/factory reset, will this delete the files i have on my internal or external memory for my unsafe/stock ROM? please answer back asap! Thanks!
Click to expand...
Click to collapse
Factory reset/Data Wipe will clean ur internal storage. Thats all.
It does nothing against ur SDCARD
I went ahead with it. And it didnt touch anything on my unsafe ROM. but on my new safe ROM I dont have 3g. What could be the problem? I still have it for my unsafe ROM.
Sent from my DROID RAZR using xda app-developers app
Try to manually add apns
Sent from my MOTOROLA RAZR using xda app-developers app
xXVestiXx said:
I went ahead with it. And it didnt touch anything on my unsafe ROM. but on my new safe ROM I dont have 3g. What could be the problem? I still have it for my unsafe ROM.
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
Did you install a rom that is for something other then gingerbread 2.3? If installed a rom for ICS or JB then you will not have correct radios
blackops11252 said:
Did you install a rom that is for something other then gingerbread 2.3? If installed a rom for ICS or JB then you will not have correct radios
Click to expand...
Click to collapse
I tried to install ics at first. But it wouldnt even boot. but the one I am using is a GB ROM. and when I switch back to original system in safestrap, 3g is just fine...
Sent from my DROID RAZR using xda app-developers app
I installed cm 10.1 over my stock rom via SS accidentally without having a backup... Now I`m running cm 10.1 on stock alot and slot 1, but only the slot one works (as supposed).
I had eclipse v4 ICS rom installed on stock, which i did via BMM, and now I`m not sure what to do.
Since the rom installed on slot 1 (cm 10.1) is working with no issues, I`m leaving it this way for a while, but I`d really like to clean up installations in future to install JB on stock with no slots, since I`d have more internal space available.
So the question is: What do I have to do to clean up my razr gsm and start over from a clean JB on stock slot (LATAM, isn`t released yet, right?).
And finally, should I face any issues if I install EU JB release?
Thanks in advance!
If you want to start fresh you have to go to stock recovery and full wipe, the flash your stock latam firmware of choice..
Sent from my XT910 using xda premium
Thanks! I should search for fastboot files, right?
kamikass said:
Thanks! I should search for fastboot files, right?
Click to expand...
Click to collapse
Yes, just go to this link:
http://sbf.droid-developers.org/
Sent from my GT-I9300 using xda app-developers app
TheMrcool212 said:
Yes, just go to this link:
http://sbf.droid-developers.org/
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
How do I know which is the latest Latam? Which is the difference between 6.5.1, 6.7.2 and 6.7.3? ICS, JB (4.1.2) and JB (4.2.2)?
Sorry for so many questions
kamikass said:
How do I know which is the latest Latam? Which is the difference between 6.5.1, 6.7.2 and 6.7.3? ICS, JB (4.1.2) and JB (4.2.2)?
Sorry for so many questions
Click to expand...
Click to collapse
i think the 6.7.2 one, because i flashed retail eu ics and the number is 6.7.2
Well, I`m trying 6.7.2-180_SLC-35_LATAM_SPYDERICSRETBRLA_ServiceCFC_fastboot.xml.zip... All I should do is restart phone on AP Fastboot, full wipe and flash it? (RSD?)
Btw, do I have to uninstall SS or delete rom slots?
kamikass said:
Btw, do I have to uninstall SS or delete rom slots?
Click to expand...
Click to collapse
Maybe yes
Sent from my GT-I9300 using xda app-developers app
Hi,
Can i flash PACman ROM - JB 4.3 on Stock rom slot. If its possible which recovery program should i use? CWM or TWRP?
Currently i'm using CWM touch based on SG3.
I took nandroid back up also. My device is Razr XT910, currently running ICS 4.0.4, and there is no scope of JB in india
Cybercrat said:
Hi,
Can i flash PACman ROM - JB 4.3 on Stock rom slot. If its possible which recovery program should i use? CWM or TWRP?
Currently i'm using CWM touch based on SG3.
I took nandroid back up also. My device is Razr XT910, currently running ICS 4.0.4, and there is no scope of JB in india
Click to expand...
Click to collapse
You should use BMM or Safestrap.
welder73 said:
You should use BMM or Safestrap.
Click to expand...
Click to collapse
Lol no worries, my english sucks too.
And thanks but what are the chances of brick it when flashing through android recovery or any custom recovery ?
Cybercrat said:
Hi,
Can i flash PACman ROM - JB 4.3 on Stock rom slot. If its possible which recovery program should i use? CWM or TWRP?
Currently i'm using CWM touch based on SG3.
I took nandroid back up also. My device is Razr XT910, currently running ICS 4.0.4, and there is no scope of JB in india
Click to expand...
Click to collapse
I used BMM to run CM 10.2 as stock system and work fine
Sent from my XT910 using xda app-developers app
vince686 said:
I used BMM to run CM 10.2 as stock system and work fine
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Hmm so i think im good to go
Thanks
Recently rooted my Verizon phone which is running MK2 version. I uninstalled my custom rom which was installed using SafeStrap and now the phone is currently very buggy and I just want to go back to Stock, I have everything backed up so I can start fresh.
Thanks.
-Kc
KcChiefs12 said:
Recently rooted my Verizon phone which is running MK2 version. I uninstalled my custom rom which was installed using SafeStrap and now the phone is currently very buggy and I just want to go back to Stock, I have everything backed up so I can start fresh.
Thanks.
-Kc
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2578209
These are tar images you flash in Odin that take you back to stock.
Sent from my SCH-I545 using Tapatalk
KcChiefs12 said:
Recently rooted my Verizon phone which is running MK2 version. I uninstalled my custom rom which was installed using SafeStrap and now the phone is currently very buggy and I just want to go back to Stock, I have everything backed up so I can start fresh.
Thanks.
-Kc
Click to expand...
Click to collapse
One reason why hash code doesn't advise loading a rom over the stock rom. I take it you didn't make a backup of the stock rom before loading the custom one? Odin probably your best choice or look into Kies.
Sent from my SCH-I545 using XDA Premium 4 mobile app