Hello everyone,
The Android 5.0.2 is now avaivable on our 530FZ
HTML:
http://www.sammobile.com/firmwares/download/54047/G530FZXXU1BOG2_G530FZOXA1BOG2_PHE/
The update is from spain and has a build date of 14 Jul 2015
This is for XXU baseband ONLY
dcduartee said:
Hello everyone,
The Android 5.0.2 is now avaivable on our 530FZ
HTML:
http://www.sammobile.com/firmwares/download/54047/G530FZXXU1BOG2_G530FZOXA1BOG2_PHE/
The update is from spain and has a build date of 14 Jul 2015
This is for XXU baseband ONLY
Click to expand...
Click to collapse
it work on sm-g530h ?
mohamedbk said:
it work on sm-g530h ?
Click to expand...
Click to collapse
It will only work if your baseband is XXU
dcduartee said:
It will only work if your baseband is XXU
Click to expand...
Click to collapse
my baseband is XXU
no bug ????
Yes, it arrived http://www.youmobile.org/blogs/entry/-Firmware-Download-Samsung-Galaxy-Grand-Prime-SM-G530FZ-Official-Android-5-0-2-Lollipop-Update-is-Rolling-out
mohamedbk said:
my baseband is XXU
no bug ????
Click to expand...
Click to collapse
I am installing I will tell you everything after I finish installing
dcduartee said:
I am installing I will tell you everything after I finish installing
Click to expand...
Click to collapse
ok i wait you
mohamedbk said:
ok i wait you
Click to expand...
Click to collapse
I have installed and it is working very well. Didn't find any bugs and it is working even better than KitKat
dcduartee said:
I have installed and it is working very well. Didn't find any bugs and it is working even better than KitKat
Click to expand...
Click to collapse
you installed this version on galaxy grand prime sm-g530h ?
mohamedbk said:
you installed this version on galaxy grand prime sm-g530h ?
Click to expand...
Click to collapse
G530FZ
dcduartee said:
G530FZ
Click to expand...
Click to collapse
and on sm-g530h i try to run it with this rom ??
mohamedbk said:
and on sm-g530h i try to run it with this rom ??
Click to expand...
Click to collapse
Try to flash it with Odin. It it doesn't work odin will give you an error
dcduartee said:
Try to flash it with Odin. It it doesn't work odin will give you an error
Click to expand...
Click to collapse
ok i will try
mohamedbk said:
ok i will try
Click to expand...
Click to collapse
Ok tell me something after you try
The only thing I cannot understand is..... Why are they launching only 5.0.2??? It doesn't make any sense... Because other versions was 5.1.1... I'm starting to think that samsung is like a girl. No one can possible understand what is going on their minds
---------- Post added at 12:41 PM ---------- Previous post was at 12:37 PM ----------
But later this night I will give a try on this rom. I think I can install it.
is this for SM-G530FZ/DS ?
dcduartee said:
Ok tell me something after you try
Click to expand...
Click to collapse
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530FZXXU1BOG2_G530FZOXA1BOG2_G530FZXXU1BOG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
mohamedbk said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530FZXXU1BOG2_G530FZOXA1BOG2_G530FZXXU1BOG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Can you send me a print from the system information option on your phone?
dcduartee said:
Can you send me a print from the system information option on your phone?
Click to expand...
Click to collapse
mohamedbk said:
Click to expand...
Click to collapse
Since your baseband is the right one it's probably because you are using a G530H instead of a G530FZ
Related
hi fourm i need your help please
when i'm trying to update my galaxy s2 gt-i9100g to the new ice cream sandwich rom 4.0.4 via odin i get this threat
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GZCLPF_I9100GZCLPE_I9100GOZHLPF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what is the rong please
omarrasheed said:
hi fourm i need your help please
when i'm trying to update my galaxy s2 gt-i9100g to the new ice cream sandwich rom 4.0.4 via odin i get this threat
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GZCLPF_I9100GZCLPE_I9100GOZHLPF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what is the rong please
Click to expand...
Click to collapse
Try these steps buddy
Link: http://www.theandroidsoul.com/i9100...-update-for-i9100g-galaxy-s2-finally-arrives/
Chinese firmwares don't work ob non-chinese devices. Try to flash the firmeware matching your country code.
Gesendet von meinem GT-I9100G mit Tapatalk 2
rcade2005 said:
Try these steps buddy
Link: http://www.theandroidsoul.com/i9100...-update-for-i9100g-galaxy-s2-finally-arrives/
Click to expand...
Click to collapse
i'm doing all the step in this link
and i'm on ice 4.0.3 i want to update to 4.0.4 it's coming for china in sammobile
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100G&r=-1#modelsa
GoZoU1 said:
Chinese firmwares don't work ob non-chinese devices. Try to flash the firmeware matching your country code.
Gesendet von meinem GT-I9100G mit Tapatalk 2
Click to expand...
Click to collapse
thank you very much man
i hope we will get one for us!
thank you again:good:
omarrasheed said:
thank you very much man
i hope we will get one for us!
thank you again:good:
Click to expand...
Click to collapse
NOW UPDATE ICS 4.0.4 :laugh:
GT-I9100G - China
PDA: I9100GZCLPF
CSC: I9100GOZHLPF
Version: 4.0.4
Date: 2012-06-29
sammobile.com/firmware/?page=8&view=5250
omarrasheed said:
i'm doing all the step in this link
and i'm on ice 4.0.3 i want to update to 4.0.4 it's coming for china in sammobile
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100G&r=-1#modelsa
Click to expand...
Click to collapse
if you are Chinese user use kies first
if you are non Chinese user no doubt this kernel wont work because its slightly different model
omarrasheed said:
i'm doing all the step in this link
and i'm on ice 4.0.3 i want to update to 4.0.4 it's coming for china in sammobile
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100G&r=-1#modelsa
Click to expand...
Click to collapse
I don know which country u belong to but if u r from China the update usin Kies. If u have the international I9100G the install ROM's like CM9 or AOKP or ParanoidAndroid or RootBox. Those ROMs come with ICS 4.0.4
Thread moved
Questions never belong in Development.
4.0.4 is released only for chinese handsets
and if u have an internation i9100g then it wont work it will just end up in a soft brick
and u will have to flash the stock rom again
Hi everyone,
I'm having a great problem. Recently got rooted SIII with CF-CWM and ICS Rom. I tried to install recent update of official 4.3 announced for UK (BTU) downloaded from SamMobile.
I used ODIN 3.7 for this process. All went successfully. ODIN automatically did a factory reset but after reset phone is on Samsung logo. Logo and LED light are blinking but not going any further. And I'm unable to go into recovery as well.
Please someone help me out in this matter. I searched here but found nothing relevant. And by the way I'm in Pakistan.
Here is the log of ODIN:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMJ9_I9300OXAGMJ9_I9300XXUGMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Odin does not do factory reset, boot into recovery and do it again.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Odin does not do factory reset, boot into recovery and do it again.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
thanks a lot brother
my problem is resolved.
please tell me how can I close this thread now?
How to root?
one more things.
Please guide me will the CF-Auto Root for SIII v6.4 by ChainFire work with 4.3 stock rom or not?
Check out CF's thread, I'm sure it will.
CF's Thread?
boomboomer said:
Check out CF's thread, I'm sure it will.
Click to expand...
Click to collapse
Would you like to tell me which one is CF's thread? any link for that?
faakher said:
Would you like to tell me which one is CF's thread? any link for that?
Click to expand...
Click to collapse
In development or found via the faqs and guides .
Well from what i know and we all know Samsung has told us that we will recieve lollipop in May. After that,1month +.And so on. We're almost in september and no lollipop update. On their site it says it's delayed. I don't know why because GpVE recieved lollipop in all countries so it's not a problem. I at least hope that they cancel it and i can be sure having no regrets rooting the phone and flashing a rom. Please post any news you find. Thanks a lot
Exactly my thoughts... :good:
Its coming
chauhanjayc said:
Its coming
Click to expand...
Click to collapse
I already installed Android Lollipop on my Galaxy Grand Prime (SM-G530H)
mrllokman said:
I already installed Android Lollipop on my Galaxy Grand Prime (SM-G530H)
Click to expand...
Click to collapse
hi all
i am from india and had SM-G530H now when i try to flash G530HXXU2AOC1_G530HTCE2AOC2_TCE (5.0 from Russia) the odian at the end says failed
since i am new to samsung any help would be solace
chauhanjayc said:
hi all
i am from india and had SM-G530H now when i try to flash G530HXXU2AOC1_G530HTCE2AOC2_TCE (5.0 from Russia) the odian at the end says failed
since i am new to samsung any help would be solace
Click to expand...
Click to collapse
You are doing something wrong the baseband is nothing you can flash every firmware if only is avaiable for that model G530H
Flamestorm said:
You are doing something wrong the baseband is nothing you can flash every firmware if only is avaiable for that model G530H
Click to expand...
Click to collapse
hi friends
trying to flash Russian firmware
getting below error
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HXCU1BOH3_G530HSER1BOH3_G530HXCU1BOH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in the device there is red taxt callled security check fail:about
any help would be appreciated
My current ROM is the XEU G925FXXU3COI9
I want to flash the newest EE EVR ROM released this week G925FXXU2QOI4 but odin fails at
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU2QOI4_G925FEVR2QOI1_G925FXXU2QOI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!![/SIZE]
I have flashed original firmwares via Odin many times so I can't understand why it doesn't work this time. I have gone from EVR to BTU to EVR to XEU but now is seems I'm stuck.
Any ideas please?
Hello
I would guess it's probably because your current version is a higher version compared to the one you want to flash, I mean you have U3 and want to flash U2.
But that's just my guess
Skhulile said:
Hello
I would guess it's probably because your current version is a higher version compared to the one you want to flash, I mean you have U3 and want to flash U2.
But that's just my guess
Click to expand...
Click to collapse
Isn't there a way to go backwards? I know you can't go from 5.1 to 5.0 but I'm sure I've changed ROMs back to older versions before.
gadgetgaz said:
Isn't there a way to go backwards? I know you can't go from 5.1 to 5.0 but I'm sure I've changed ROMs back to older versions before.
Click to expand...
Click to collapse
Yea I agree, but apparently some versions you can't downgrade, I'm sure I read it somewhere just can't remember where
HELLO!
I tried to flash stock ROM on my GRAND 2 [SM-G7105]
the file is ok, but when i try to start it does that
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7105XWUANG2_G7105OLBANG1_G7105DXUANB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ROM is
G7105XWUANG2_G7105OLBANG1_G7105DXUANB1_HOME.tar.md5
Click to expand...
Click to collapse
As mentioned above,
Code:
VERSION 4.4.2
USING
Resurrection 5.7.4
If it helps
I really need your help guys!
if you have any solution (I PREFER CUSTOM ROM)
[but i haven't seen any custom ROM for my device with NFC]
thanks!
CM13 and CM14 no camera work no dual sim RIl fix slow smooth scroll system and app slow lanch app
Smaali said:
CM13 and CM14 no camera work no dual sim RIl fix slow smooth scroll system and app slow lanch app
Click to expand...
Click to collapse
Camera has ben fixed i made a patch for it ;0
fufle said:
HELLO!
I tried to flash stock ROM on my GRAND 2 [SM-G7105]
the file is ok, but when i try to start it does that
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7105XWUANG2_G7105OLBANG1_G7105DXUANB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ROM is
As mentioned above,
Code:
VERSION 4.4.2
USING
Resurrection 5.7.4
If it helps
I really need your help guys!
if you have any solution (I PREFER CUSTOM ROM)
[but i haven't seen any custom ROM for my device with NFC]
thanks!
Click to expand...
Click to collapse
You don't downloaded the right version download the one for your carrier and region
And don't try to downgrade knox will block you if you try to downgrade