Help I need a of1 tar of stock if anyone has it.
http://forum.xda-developers.com/showthread.php?t=3203361 That should do it.
fudplayers said:
http://forum.xda-developers.com/showthread.php?t=3203361 That should do it.
Click to expand...
Click to collapse
Yeah, I forgot I had a copy of the no wipe of1 on my laptop and already fixed it. Thanks though.
So how do I get xposed on of1 without being able to use a recovery. I finally was able to to get my girls phone rooted again with the of1 update. I molded the dpi, boot animation, and took off AL the vzw and Samsung bull. I just need xposed and to mod the sound. Help?
GamerOnOne said:
Yeah, I forgot I had a copy of the no wipe of1 on my laptop and already fixed it. Thanks though.
So how do I get xposed on of1 without being able to use a recovery. I finally was able to to get my girls phone rooted again with the of1 update. I molded the dpi, boot animation, and took off AL the vzw and Samsung bull. I just need xposed and to mod the sound. Help?
Click to expand...
Click to collapse
Do you happen to have a link to that? I tried that thread they linked and it didn't work
raver's fallacy said:
Do you happen to have a link to that? I tried that thread they linked and it didn't work
Click to expand...
Click to collapse
Link for what? Root?
GamerOnOne said:
Link for what? Root?
Click to expand...
Click to collapse
The no wipe of1?
raver's fallacy said:
The no wipe of1?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24052804347816632
It will take root away just reroot
GamerOnOne said:
https://www.androidfilehost.com/?fid=24052804347816632
It will take root away just reroot
Click to expand...
Click to collapse
any idea why it would Pass in Odin then black screen on boot after Galaxy logo?
There's a chance I'm on OC1 not OF1... After having Samsung smart switch update the phone froze on the Verizon screen so I assumed I was on OF1.
Odin passes
Phone reboots
Shows the android with the chest plate open, a bar filling. gets 50% then black screen and does galaxy logo for too long.
Then LED is stuck on and black screen.
Options: auto reboot and f. reset time
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> NOBL_OF1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
raver's fallacy said:
any idea why it would Pass in Odin then black screen on boot after Galaxy logo?
There's a chance I'm on OC1 not OF1... After having Samsung smart switch update the phone froze on the Verizon screen so I assumed I was on OF1.
Odin passes
Phone reboots
Shows the android with the chest plate open, a bar filling. gets 50% then black screen and does galaxy logo for too long.
Then LED is stuck on and black screen.
Options: auto reboot and f. reset time
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> NOBL_OF1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Try flashing of1 bootloader: http://d-h.st/knjx
GamerOnOne said:
Try flashing of1 bootloader: http://d-h.st/knjx
Click to expand...
Click to collapse
same issue. I'll start my search again
thank you!
raver's fallacy said:
same issue. I'll start my search again
thank you!
Click to expand...
Click to collapse
You might have to face wiping the device.
GamerOnOne said:
You might have to face wiping the device.
Click to expand...
Click to collapse
that's perfectly fine with me. but... I've tried a few stock images. Basically I don't know where to get a full-wipe for of1.
all the flashes I do end up with the same problem, black screen after the galaxy logo.
raver's fallacy said:
that's perfectly fine with me. but... I've tried a few stock images. Basically I don't know where to get a full-wipe for of1.
all the flashes I do end up with the same problem, black screen after the galaxy logo.
Click to expand...
Click to collapse
All you can do is Google. I know you can't flash old tars or you'll get an error if I find anything I'll let you know.
Related
So yeah, for some days ago i have installed a custom rom this one : Leaked Android 4.2.2 XXUFME3 ROM for Galaxy S III
it worked fine but i wanted to get back to stock rom.
So i downloaded a stock rom ( for nordic countries )
After this i re partioned my s3, i used a file for 16 gb cause its my model. after this the phone turned on and i saw samsung galaxy s3 logo blincking, nothing else heppend. But i knew i wasnt done and took the battery out and back, and entered download mode.
Now i chosed a rom with PDA button, i unchecked re partion and hited start button. Odin was stuck at "setup connection".
I have installed and reinstalled drivers, installed and uinstalled kies, i have tried this on all of my usb ports, i tried this on my other pc with installed drivers etc. Nothing WORKS!!!! i am a noob with Android and really need a help. i Have working to get it work 4 hours and nothing...
Btw i have no sd card in my s3.
It looks like i dont have any firmware on my phone now, but i can still enter download mod, but not recovery mod.
What can i do??
Reads as you may have bricked your phone as you have for some unknown reason repartitioned it ..
install stock rom via Odin and post the Odin results .
jje
JJEgan said:
Reads as you may have bricked your phone as you have for some unknown reason repartitioned it ..
install stock rom via Odin and post the Odin results .
jje
Click to expand...
Click to collapse
omg... now odin cant see my phone...., but it was always stuck at setup connection, or the odin have stoped working. I will reset my pc and post result.
kris222 said:
omg... now odin cant see my phone...., but it was always stuck at setup connection, or the odin have stoped working. I will reset my pc and post result.
Click to expand...
Click to collapse
no need to reset your pc. change the usb port and check it. there's no need for you to panic.
sriram231092 said:
no need to reset your pc. change the usb port and check it. there's no need for you to panic.
Click to expand...
Click to collapse
okey i have pluged it to another computer and now it comes up in odin. but it wont install . here
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_NEE_I9300XXALE8_I9300NEEALE3_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
and here it ends..... after like 20 min the message comes up and says that 0 complited 1 failed. so what now?
kris222 said:
okey i have pluged it to another computer and now it comes up in odin. but it wont install . here
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_NEE_I9300XXALE8_I9300NEEALE3_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
and here it ends..... after like 20 min the message comes up and says that 0 complited 1 failed. so what now?
Click to expand...
Click to collapse
did you do everything as mentioned in this site? http://androidromupdate.com/2012/06...ung-galaxy-s3-gt-i9300-stock-rom-i9300xxale8/
i did!
the only thing i did wrong was to re partition it......
now i dont know how to get it work...
Try flashing again but with the newest ROM from NEE, if flash successful, probably will boot loop again, enter to recovery mode and do a factory reset.
http://forum.xda-developers.com/showthread.php?t=1646610 2nd post.
Good luck
Regards
[email protected]
You'll need to re-partition now! You probably screwed pit partition!
Try with another pit file and make sure its a legit one!
Sent from my GT-I9300 using xda premium
Ver3go said:
You'll need to re-partition now! You probably screwed pit partition!
Try with another pit file and make sure its a legit one!
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hi i downloaded pit file for 16 gb model. After instlling it it said pass (green) on odin. After this i i tried to install the stock rom, but it failed....
Here is log of Odin :
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMD2_I9300OXXEMD1_I9300XXEMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Help???
anyone??
kris222 said:
Hi i downloaded pit file for 16 gb model. After instlling it it said pass (green) on odin. After this i i tried to install the stock rom, but it failed....
Here is log of Odin :
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMD2_I9300OXXEMD1_I9300XXEMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Help???
Click to expand...
Click to collapse
Do all in one thick re-partition! And put the pit. And choose pda with your rom
Sent from my GT-I9300 using xda premium
Pretty fun that non experienced people are flashing stuffs, rooting etc etc without reading two or three times before so they learn about what could happen if anything are done the wrong way..
In worst case, warranty is the only solution to fix this and re-program PIT layering of your phone. It may cost if there is any sign of modifications / flash counter above zero...
Sent from my GT-I9300 using xda app-developers app
Go to http://forum.xda-developers.com/showthread.php?t=1944196 post #6
Regards
[email protected]
So there is nothing i can do? just go to service....?
And because i have installed custom rom i have no waranty.... is it expensiv to fix?
btw i heard of a 3 part rom with mx.pit, would it help or would it make it wors?
?????
kris222 said:
So there is nothing i can do? just go to service....?
And because i have installed custom rom i have no waranty.... is it expensiv to fix?
btw i heard of a 3 part rom with mx.pit, would it help or would it make it wors?
Click to expand...
Click to collapse
Your phone is dead sure worst wont do
Sent from my GT-I9300 using xda premium
I think they will repair it for free
Sent from my washing machine using xda premium
I rooted on VRUAME7 I am now trying to do a reset/restore. When I did a factory reset in the system, it rebooted and is now stuck on a yellow exclamation mark and says:
I tryed to put CWM on my phone. I didnt do my research so I had no idea I couldnt with ME7.. I have followed multiple forum guides that have the same exact problems as mine. also all ME7 specific. At this point... ODIN is non responsive.. and I am at the mercy of all yall haha
Odin Failed and says:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone says:
Start [224,1440]
SW REV. CHECK FAIL: FOUND: 3, Binary: 1
Once you're on ME7 you cannot Odin back to MDK. Find the ME7 Odin file and you'll be good.
Sent from my badass Galaxy S4 using Tapatalk
spc_hicks09 said:
Once you're on ME7 you cannot Odin back to MDK. Find the ME7 Odin file and you'll be good.
Sent from my badass Galaxy S4 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2301259
I have followed this one.. downloaded the ME7 file...
It still is not working. This is not the only ME7 file I have downloaded and they have all not worked.
I have used multiple cables on the phone and multiple versions of odin.
They are all doing the same thing... I have been at this for HOURS.
I am seriously stumped....
spjohnson08 said:
http://forum.xda-developers.com/showthread.php?t=2301259
I have followed this one.. downloaded the ME7 file...
It still is not working. This is not the only ME7 file I have downloaded and they have all not worked.
I have used multiple cables on the phone and multiple versions of odin.
They are all doing the same thing... I have been at this for HOURS.
I am seriously stumped....
Click to expand...
Click to collapse
I would verify the md5 to.make sure your not getting corrupted downloads. Its pretty common, but ya like hicks said you cant go backwards in firmware which is what you tried to do the first time around. It has to be an me7 image or ml1.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
spc_hicks09 said:
Once you're on ME7 you cannot Odin back to MDK. Find the ME7 Odin file and you'll be good.
Sent from my badass Galaxy S4 using Tapatalk
Click to expand...
Click to collapse
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
This is with the ME7 file...
hexitnow said:
I would verify the md5 to.make sure your not getting corrupted downloads. Its pretty common, but ya like hicks said you cant go backwards in firmware which is what you tried to do the first time around. It has to be an me7 image or ml1.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
Click to expand...
Click to collapse
I am now trying to use the ml1 file on http://forum.xda-developers.com/showthread.php?t=2301259
I didnt know I could do that...
How do I verify the Hash?
spjohnson08 said:
I am now trying to use the ml1 file on http://forum.xda-developers.com/showthread.php?t=2301259
I didnt know I could do that...
How do I verify the Hash?
Click to expand...
Click to collapse
Google md5 checker or md5 verifier. Its a straight forward process. The correct md5 should be posted in the thread.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
hi
i flashed a firmware to my s6 edsge all went well unitel hidden.img this is the message in odin
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FCOS1AOCV_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> param.bin
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
name of firmware:G925FXXU1AOCV_G925FCOS1AOCV_G925FXXU1AOCW_HOME.tar
what should i doo please help
thanks
nouninou said:
hi
i flashed a firmware to my s6 edsge all went well unitel hidden.img this is the message in odin
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FCOS1AOCV_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> param.bin
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
name of firmware:G925FXXU1AOCV_G925FCOS1AOCV_G925FXXU1AOCW_HOME.tar
what should i doo please help
thanks
Click to expand...
Click to collapse
Dear,
try booting to recovery menu and delete cache & do factory reset then power off the phone, then download the firmware again and flash it.
Regards
also use the latest Odin version available thought it was 3.10.6
Solved?
thuglife said:
also use the latest Odin version available thought it was 3.10.6
Click to expand...
Click to collapse
Did you solve your issue? i am having the exact same problem
Did you guys manage to resolve this - I'm having the same problem.
delete the hidden img
http://forum.xda-developers.com/showthread.php?t=3141455
always the same question..I wrote that I think 6 times or so
i used google search if i had that problem
I have soft bricked my s6 edge thrice already. Every time i fixed it by performing a hard factory data reset. However i needed to let it run out of juice before i could boot into recovery
Thanks guys .. I'll try both suggestions and let you know.
Snowby123 said:
I have soft bricked my s6 edge thrice already. Every time i fixed it by performing a hard factory data reset. However i needed to let it run out of juice before i could boot into recovery
Click to expand...
Click to collapse
press all together... power+home+vol up for recovery and volume down for download Odin mode
I can get ODIN mode, but it won't go into recovery mode.
i11usive said:
I can get ODIN mode, but it won't go into recovery mode.
Click to expand...
Click to collapse
try select reboot from Odin mode..and press the combination
Alex-V said:
try select reboot from Odin mode..and press the combination
Click to expand...
Click to collapse
there doesn't appear to be a reboot option in ODIN, to get out of it, I have to press VOL UP/DOWN, POWER AND HOME
i11usive said:
there doesn't appear to be a reboot option in ODIN, to get out of it, I have to press VOL UP/DOWN, POWER AND HOME
Click to expand...
Click to collapse
if you booted in that mode it gives you the option to enter or reboot..
Ah - I see what you mean .. I've seen the vid on YouTube where the guy does that .. I press VOL UP and then quickly press the VOL DN/HOME/POWER combo and it comes back to the "Error has occurred while updating the device software" screen. Any other way?
i11usive said:
Ah - I see what you mean .. I've seen the vid on YouTube where the guy does that .. I press VOL UP and then quickly press the VOL DN/HOME/POWER combo and it comes back to the "Error has occurred while updating the device software" screen. Any other way?
Click to expand...
Click to collapse
simple in the moment of reboot press and hold the combo with volume up.. brings me into recovery
BTW..you can use adb comment..
adb reboot recovery
Alex-V said:
delete the hidden img
http://forum.xda-developers.com/showthread.php?t=3141455
always the same question..I wrote that I think 6 times or so
i used google search if i had that problem
Click to expand...
Click to collapse
Can you help me solve this problem too? my phone does not boot with a similar problem and i do not know how to delete the recovery.img you talk about
I face a strange problem,i get error ocured i extract hidden,flash it and phone stucks on s6 logo,i see when i flash that i get erro while flashing CM bin
I have a sprint s6 edge that I rooted but after i rooted it I flashed twrp recovery. Ironically it bricked my phone. I've tried using odin and I got this error: <ID:0/005> Complete(Write) operation failed.
Here's the whole log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU1AOCF_G925PSPT1AOCF_G925PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Yes, I have all the drivers installed and all of that. I am new to this kind of stuff and I've seen people talk about pit files. I don't kno what those are so I don't know if that would help me. I've been trying to fix this for 3 months please help.
UNICORNSRDABEST said:
I have a sprint s6 edge that I rooted but after i rooted it I flashed twrp recovery. Ironically it bricked my phone. I've tried using odin and I got this error: <ID:0/005> Complete(Write) operation failed.
Here's the whole log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU1AOCF_G925PSPT1AOCF_G925PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Yes, I have all the drivers installed and all of that. I am new to this kind of stuff and I've seen people talk about pit files. I don't kno what those are so I don't know if that would help me. I've been trying to fix this for 3 months please help.
Click to expand...
Click to collapse
Have you tried SmartSwitch its easier Then odin
osman34 said:
Have you tried SmartSwitch its easier Then odin
Click to expand...
Click to collapse
When I downloaded smart switch I got a side by side error. This happened on 2 different computers. I don't know how to fix it. I also tried using kies but I'm not sure how to get the s/n or imei.
UNICORNSRDABEST said:
When I downloaded smart switch I got a side by side error. This happened on 2 different computers. I don't know how to fix it. I also tried using kies but I'm not sure how to get the s/n or imei.
Click to expand...
Click to collapse
sboot.bin fail is the bootloader is older than your current one. Flash another firmware with a newer bootloader.
If you try smart switch you must fully close odin and phone still needs to be in download mode to do the emergency firmware recovery
callumbr1 said:
sboot.bin fail is the bootloader is older than your current one. Flash another firmware with a newer bootloader.
If you try smart switch you must fully close odin and phone still needs to be in download mode to do the emergency firmware recovery
Click to expand...
Click to collapse
So that means my odin is out of date or the stock firmware?
UNICORNSRDABEST said:
So that means my odin is out of date or the stock firmware?
Click to expand...
Click to collapse
the stock firmware has a older bootloader.
flash a firmware with newer bootloader.
callumbr1 said:
the stock firmware has a older bootloader.
flash a firmware with newer bootloader.
Click to expand...
Click to collapse
I'm still new to his stuff. What is a boot loader?
UNICORNSRDABEST said:
I'm still new to his stuff. What is a boot loader?
Click to expand...
Click to collapse
its part of the firmware package.
try to flash this firmware through odin
https://www.sammobile.com/firmwares/download/119909/G925PVPU4CPL3_G925PSPT4CPL3_SPR/
Hi !
After flashing UK Oreo image with the steps provided here on my t-820 (original firmware, stock recovery, no root )
As you can see Odin log shows all OK when i flash
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4920 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> persist.img.ext4
<ID:0/005> userdata.img.ext4
<ID:0/005> modem.bin
<ID:0/005> adspso.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
but after the tablet restart for the first time after the upgrade it got stuck on bootloop showing samsung logo back and forth and doesnt start at all, ive tried to get into recovery mode but it also gets a bootloop the only option available is get to download mode. I still can get my S3 detected by Odin when i get to download mode.
Please advice.
rayxanber said:
Hi !
After flashing UK Oreo image with the steps provided here on my t-820 (original firmware, stock recovery, no root )
As you can see Odin log shows all OK when i flash
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4920 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> persist.img.ext4
<ID:0/005> userdata.img.ext4
<ID:0/005> modem.bin
<ID:0/005> adspso.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
but after the tablet restart for the first time after the upgrade it got stuck on bootloop showing samsung logo back and forth and doesnt start at all, ive tried to get into recovery mode but it also gets a bootloop the only option available is get to download mode. I still can get my S3 detected by Odin when i get to download mode.
Please advice.
Click to expand...
Click to collapse
The UK-version of Oreo DOESN'T have USERDATA
Put the files in BL AP & CSC (CSC_BTU or HOME_CSC_BTU)
Re:
THANKS !!!
In fact i've only use the PDA file while flashing, i'll try adding the files you mention.
I had the same problem, but then I just flashed the BL and AP and it booted fine after that. Mine failed when I tried with the CSC. Good luck!
Re:
kream21 said:
I had the same problem, but then I just flashed the BL and AP and it booted fine after that. Mine failed when I tried with the CSC. Good luck!
Click to expand...
Click to collapse
Hi !
Did you mean you got a bootloop again after flashing the CSC ? Did you try with both CSC files or just one of them ?
rayxanber said:
Hi !
Did you mean you got a bootloop again after flashing the CSC ? Did you try with both CSC files or just one of them ?
Click to expand...
Click to collapse
No i got a fail. I only used one. When I flashed just the BL and AP I got a pass and everything worked out fine.
Thank you both.
I've flash again using the 3 files and the tablet is working now.