Wipe internal storage redmi note 3 mtk - Xiaomi Redmi Note 3 Questions & Answers

Hello to everyone! I'm sorry for my bad english...
I've wipe ALL everything with TWRP.
I've for error erase The OS.
Now I've try to reinstall stock ROM with SP Flash Tool.
The software make The progress until 100% but The smartphone don't turn on!
Please Help Me!!! :crying:

lordaresius said:
Hello to everyone! I'm sorry for my bad english...
I've wipe ALL everything with TWRP.
I've for error erase The OS.
Now I've try to reinstall stock ROM with SP Flash Tool.
The software make The progress until 100% but The smartphone don't turn on!
Please Help Me!!! :crying:
Click to expand...
Click to collapse
You can't damage the phone with flashing because it has a MTK processor so don't panic.
Already tried this : "For those who got their devices Fully Hard Brick after successful flash. Just Follow the Below: Hold Both Vol Down + Power button then plug the usb cable(Same as in main guide). The progress bar turned yellow and flash will be completed.Turned on the device, It will take some time wait for it." from this thread ?

Related

[Q] HELP: I5510 DeadBoot

Hello all.
I've got problem with my i5510.
First.That I5510 has bootloop (restart and restart). I could put it on download mode. but not recovery mode.
So I flashed it with ODIN with new UK room (there is no rom for indonesia)
It passed but still restart
Then I flashed it by other ROM.
Finally, my I5510 is really DEAD now... T_T
Can't connect to PC,Can't download mode nor recovery mode.
I've try to Connect it by holding power + Q without battery wait for 10s than insert battery but it is still Can't connect to PC
Any idea?without JTAG?maybe by OMAP flash?
Thanks in advance...
Thanks for your help..
Sorry if I post this thread on a wrong room. this is my first Thread
Sorry for my bad english
i've jtag it and than now i got download mode.
but it is still restart when i flash it with latest rom and deadboot if i flash it with froyo rom. any idea?
can donload mode,can't recovery mode,but still restart flash with odin
Done.
>Full erase it by Jtag
>flsh with file dump althought i only get error : "bad address"
>Flash bootfile
>flash Foroyo via odin
now my i5510 back to life again but still get error
>Flash again with gingerbread
> Full Factory
I've got it normal again although I lost my IMEI,but still can dial,browsing,wifi,bluetooth..
If there is any guys who can teach me how to repair IMEI without BOX or dongle without backup EFS... Please help me...
Thanks

pliiiiiz help dead z2

Hello Excuse me, i dont speak English... just google
i formate my phone by philz to install custom rom
The problem is: i format everyhing- data cache system preload...
and i forgot to put the custom rom in my phone and after restart the phone stays on the sony logo.... pliiiz help cant enter to recovery to restore my backup or to connect my device to flash new rom with pc
bilalino said:
Hello Excuse me, i dont speak English... just google
i formate my phone by philz to install custom rom
The problem is: i format everyhing- data cache system preload...
and i forgot to put the custom rom in my phone and after restart the phone stays on the sony logo.... pliiiz help cant enter to recovery to restore my backup or to connect my device to flash new rom with pc
Click to expand...
Click to collapse
This question has been asked so many time. Did you try searching??
Can be easily fixed. Download the FTF (Original Firmware) and flash it using the Flashtool
Here's a guide on how to do it: http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
Read this for more information specially the FAQ part : http://forum.xda-developers.com/showthread.php?t=2775411
im new in sony device
after this tuto:
1. Open the Flap on the Left Side of your device
2. Press and hold the RED Button for 30 secionds
3. Your device should buzz 3 times
after that the phone buzz 3 times but after plug the phone nothing happened to flash the rom
Solved problem usb port after reboot pc the flash succefull. sorry for my bad english

Stuck in boot logo, and stuck on recovery!

Please help me, I coulnd't find a real solution anywhere for this, since I get stuck in recovery when I vol up+power, or I'll get stuck at boot logo if I hold power. I can only turn off because I pull out the battery on this Lenovo A800. I think it happened when I wiped data,cache, and dalvik after flashing another new rom. How could I revive this? thanks please!
helpplease123 said:
Please help me, I coulnd't find a real solution anywhere for this, since I get stuck in recovery when I vol up+power, or I'll get stuck at boot logo if I hold power. I can only turn off because I pull out the battery on this Lenovo A800. I think it happened when I wiped data,cache, and dalvik after flashing another new rom. How could I revive this? thanks please!
Click to expand...
Click to collapse
I think you just wiped everything with system OR you just cross flashed different ROM into your system. That means you are bricked!
As you already bricked your phone, you should try flashing custom ROM.
Try below steps;
DO IT AT YOUR OWN RISK
A] Install drivers USB VCOM Lenovo A800. (Link below)
http://d-h.st/3ib
B] Download ROM (Link below)
http:// mobilecon. info/wp-content/plugins/download-monitor/download.php?id=Download+Lenovo+A800+Stock+ROM+%28official+version%29+
(Delete spaces)
Extract LenovoA800_S133_121213I.rar2.Inside extract folder you`ll see 4 rar file
1.A800_Customized_SP_Flashtool_20121022(v3.1238.5).rar
(this is a flashtool for flashing ROM)
2.apdb.rar
3.modemdb.rar
4.target_bin.rar
Extract A800_Customized_SP_Flashtool_20121022(v3.1238.5).rar
Extract target_bin.rar
Go to A800_Customized_SP_Flashtool_20121022(v3.1238.5) extract folder
Run Flash_tool.exe
Click Scatter loading, then go to target_bin extract folder
selectMT6577_Android_scatter_emmcPCext, turn off the device
Remove the battery, sdcard and sim card
Put back the battery
Click Firmware Upgrade in Flash Tool
Connect A800 to PC/laptop
Wait until all installation process done, if it success then Green logo will appear
Remove your device from PC/laptop
Turn it off
Put back SD card and sim card.
Then turn on, at first loading after flashing ROM A800 will took more time just wait.
Done!
If you found this helpful, there's a thumbs up button (thanks button) just press it
Regards,
hitman-xda
DUDE YOU ARE GOOD!!!! I would make accounts to fill your thanks meter lol! btw, can I retry to flash roms again? Thank you very much, you saved me!
helpplease123 said:
DUDE YOU ARE GOOD!!!! I would make accounts to fill your thanks meter lol! btw, can I retry to flash roms again? Thank you very much, you saved me!
Click to expand...
Click to collapse
You can flash ROMs through flashtool as many times as you can. Just make sure you flash correct ROM.
It formats everything that is already into your system and clean install ROM.
Hope you succeed well
I just installed the rom I was attempting before it bricked, now it's better and successful (in twrp though). BIG THANKS TO YOU MAN!!
helpplease123 said:
I just installed the rom I was attempting before it bricked, now it's better and successful (in twrp though). BIG THANKS TO YOU MAN!!
Click to expand...
Click to collapse
See you next time buddy
I also have this promblem one time

I have compiled TWRP! Help me in fixing issues and making OFFICIAL.

Hereby, I am planning to Make OFFICIAL TWRP for Hennessy (Redmi Note 3 - MTK), compile was successfull.
Where as I don't own a Redmi Note 3 MTK! please test this recovery-hennessy.img and test if its booting.
Here by: we are step behind of official twrp!
http://build.twrp.me/twrp/twrp-3.0.2-0-hennessy.img
test this recovery if booting come on official is up.. please report ASAP.
Thanks to:
@lokjianming
@Dees_Troy
@MSF Jarvis
you gave me a cool bootloop...
I went thought the boot loop by forcing the phone into sp flash tool mode and then staring normally
anyway, it is not working mate, apreciate the effort but i repeat, THIS RECOVERY IS NOT WORKING
bower1994 said:
you gave me a cool bootloop...
I went thought the boot loop by forcing the phone into sp flash tool mode and then staring normally
anyway, it is not working mate, apreciate the effort but i repeat, THIS RECOVERY IS NOT WORKING
Click to expand...
Click to collapse
Thanks for reply. I am going to work on new build. I hope you will test it! Is squid twpr working?
New build!
bower1994 said:
you gave me a cool bootloop...
I went thought the boot loop by forcing the phone into sp flash tool mode and then staring normally
anyway, it is not working mate, apreciate the effort but i repeat, THIS RECOVERY IS NOT WORKING
Click to expand...
Click to collapse
Sir,
Build 2 is OUT! can you say me is it working! if you say working i will update device tree online.
yeah squid was working fine, gonna test build2 and report back in a few minutes
---------- Post added at 06:00 PM ---------- Previous post was at 05:49 PM ----------
not working mate
Here by No issues, I have made a TWRP with Omni TWRP source (working) running on 3.4.x kernel.
Soon you will find [OFFICIAL][TWRP] mostly soon you will find on dl.twrp.me/hennessy
I have unofficial twrp,i dont like use sp flashtool,if you create a twrp flashable zip i test
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
bower1994 said:
you gave me a cool bootloop...
I went thought the boot loop by forcing the phone into sp flash tool mode and then staring normally
anyway, it is not working mate, apreciate the effort but i repeat, THIS RECOVERY IS NOT WORKING
Click to expand...
Click to collapse
bricked my phone flashing the 2nd build...help me recover my phone... what did u do, any tips or link? tks in adv
Taengo0 said:
bricked my phone flashing the 2nd build...help me recover my phone... what did u do, any tips or link? tks in adv
Click to expand...
Click to collapse
hey mate, sorry for late reply just in case anyone is also having this problems ill leave the workaround i followed to recover the phone.
the phone gets into bootlop mode becuase it starts to try get into recovery and it is not working so the phone just starts trying and trying again
You need:
usb cable
pc with sp flash tools software
drivers
a workable rom made for sp flash tools (there tones of them in miui forum)
Steps:
1. you have to prepare to flash the rom and hit download
2. then you connect the phone in the small moment it has the black screen, you have to connect the phone while pressing volume down, the program should react to your phone connection
3. cancel the flashing of the rom before it starts, this should let the phone exit from that bootloop state
4 remove the cable and start your phone normally
5 install a workable recovery with apps like flashify/flashfire
done
Probably if your phone use the whole battery and you start chaguing it up once it is already shut down you should also be able to start into the system partition and not into the recovery mode
i hope i made myself understandable as english is not my primary language
bower1994 said:
hey mate, sorry for late reply just in case anyone is also having this problems ill leave the workaround i followed to recover the phone.
the phone gets into bootlop mode becuase it starts to try get into recovery and it is not working so the phone just starts trying and trying again
You need:
usb cable
pc with sp flash tools software
drivers
a workable rom made for sp flash tools (there tones of them in miui forum)
Steps:
1. you have to prepare to flash the rom and hit download
2. then you connect the phone in the small moment it has the black screen, you have to connect the phone while pressing volume down, the program should react to your phone connection
3. cancel the flashing of the rom before it starts, this should let the phone exit from that bootloop state
4 remove the cable and start your phone normally
5 install a workable recovery with apps like flashify/flashfire
done
Probably if your phone use the whole battery and you start chaguing it up once it is already shut down you should also be able to start into the system partition and not into the recovery mode
i hope i made myself understandable as english is not my primary language
Click to expand...
Click to collapse
what i did was wait until my phone's battery completely empty, boot into fastboot and flash squid's twrp...it worked for me but took a lot of time (i left my phone in the bootloop for about one day before the battery goes off)
thanks for the reply

boot loop flare s play

anyone can help me? I've tried to root my cherry mobile flare s play, I've flash twrp on it but it always boot in recovery it doesn't boot in system partition so I tried wiping the cache and dalvik cache, still doesn't boot so I tried flashing another recovery/rom and it just get worst it's now stuck in boot loop I've already tried the abd reboot-bootloader and always fall in error: device not found., I hope someone notice my case. thanks
Hello, this happens when the system is actually corrupted
you may reflash stock then twrp then root again
or just get a custom recovery for your device
you must go in bootloader for stock rom or twrp for custom rom, and that's fine your phone just needs a rom and its good to go
good luck
TheShadowMC said:
Hello, this happens when the system is actually corrupted
you may reflash stock then twrp then root again
or just get a custom recovery for your device
you must go in bootloader for stock rom or twrp for custom rom, and that's fine your phone just needs a rom and its good to go
good luck
Click to expand...
Click to collapse
but how can I boot it on bootloader? key combinations like vol+ and power or any combo doesn't work, only if someone can teach me how to boot it on bootloader or fastboot then there would be no problem for me, I don't know what to do now
Hello again, take out the bettery then put it back and use the bootloader combo
if it didnt work take out the bettery and flash through sp flash tool
nothing to worry about, i didnt notice that your phone can be flashed through sp flash, since it just requires the phone to be off
not really such a scary situation
TheShadowMC said:
Hello again, take out the bettery then put it back and use the bootloader combo
if it didnt work take out the bettery and flash through sp flash tool
nothing to worry about, i didnt notice that your phone can be flashed through sp flash, since it just requires the phone to be off
not really such a scary situation
Click to expand...
Click to collapse
will it work even if my device don't have battery on it?
kiltot24 said:
will it work even if my device don't have battery on it?
Click to expand...
Click to collapse
sp flash for my knowledge would work even when the battery is out it doesnt matter, just load the scatter press download button and connect the phone with battery off
good luck again:highfive:
-Hope- said:
sp flash for my knowledge would work even when the battery is out it doesnt matter, just load the scatter press download button and connect the phone with battery off
good luck again:highfive:
Click to expand...
Click to collapse
in my case I can't flash even a recovery image using sp flash tool. any help? sorry if I look like an ignorant any way thanks for your help guys, I really appreciate
no no problem, however what's the problem ?
I'm trying to flash a custom recovery on it but it doesn't work, I'm trying to flash twrp, the one I've flash before, because I don't have the stock rom of my device so I'm doing the process partially. I'm aiming to flash twrp and then restore my saved back up.
Hello,
i think your device stock frimware is there on google, however when you try to flash what error does it give or what happens ?
It doesn't show any error message and not showing any progress at all. my device just blink showing that the battery is charging though the battery is not present.
if it didnt detect it try pressing the volume up or volume down to make sure while connected ( and download button is pressed
just blink until it reaches time out.
I'm sure that my cable is working, it works on other device. I already install all the drivers I need.
is there a way to stop my device from simultaneous booting? it appears to be detected on device manager but just for a few sec, then reboot and appear again.
ensure the ROM is loaded properly in the flash tool.
Switch off the phone and remove battery.
press the start button in the flash tool to initiate the ROM flashing process. The process will be in hold, waiting for the phone to accept the new firmware.
Now connect the phone to computer.
Try these. Press and hold VOLUME DOWN OR VOLUME UP OR POWER+VOLUME UP OR POWER+VOLUME DOWN. One of these should work and the flashing process should start.
can I obtain the stock rom from the same device? I have the same model and it works properly. I can't download the stock rom from mediafire it always fail due to poor internet connection so I'm looking for another way.
I tried updating my driver then my device was recognized but when I flash the recovery image it displays 100% but in red color.
kiltot24 said:
I tried updating my driver then my device was recognized but when I flash the recovery image it displays 100% but in red color.
Click to expand...
Click to collapse
are you using the latest sp flash tool ?
yes thanks my device works fine now thank you for your help, the only problem now is how will I restore my device imei, it can be changed in engineer mode using at+ command but it be deleted again once conduct a factory reset in short it just set a temporary imei for my device, is there a way to change my device imei permanently?

Categories

Resources