Hi guys need help, i tried unrooting my device.. from dis link
" https://theunlockr.com/2016/02/17/how-to-unroot-the-oneplus-x/ " but i got stuck when i tried booting in recovery from fastboot.
i hve attached the screenshot also plz help how to get over dis desperately need to unroot my device.
thanks in advance
OK, I see the guide. It's not about unrooting. It's about going back to stock firmware with stock recovery !
I think, there is no need to do all that....
Now, you should follow that guide :
http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
Or just in cas you need it, via fasboot install this recovery
Then shutdown the device
You will have to reboot directly to recovery
And flash 2.2.2 Full rom zip
If you have the firmware you are on stored on your device. I believe dirty flashing it in recovery will restore the system files to how they were before rooting.
Related
Hi
I have Coolpad E501 EU (other names: Modena, Y76, Sky). It's dual sim, stock android 5.1, rooted, stock recovery.
After last mini update (9,2 MB) coolpad logo is showing and then it goes only to recovery. Phone was rooted using KingRoot app, and then applied update so I bet it was a mistake to do so.
I have second one same Coolpad phone - working, rooted, stock android, stock recovery. So it might help in restoring bricked one.
I searched almost everywhere on the internet looking for stock roms, recovery or something that I can flash.
I tried using YGDP tool with 4.4 official rom that I found but no luck. I get the message "Bootloader is old" in logs.
Tried to do backup with nandroid of working phone but it's making backup for custom recovery (cwm - .tar or twrp - .wim). My phone doesn't have one.
Recovery has an option to apply update from zip. Last update that messed up is here:
ota.coolyun.com/ota/Android/Coolpad%20E501_EU/P0/5.1.222.51.P0.151216.Y76_U00_5.1.222.61.P0.160510.Y76_U00/update_1464055522221.zip
I dont care about data., only working system.
Anyway I appreciate some help how to bite that, any ideas how to revive that phone. I was trying to do a system.img backup of /system partition in working phone, but no luck, partition is in ext4. I thought I can restore that using adb.
I will answer any questions if something I wrote is not clear. I'm not afraid of adb, flashed many phones, so I'm not looking for step by step tutorial, only to someone point me in right direction to solve this problem
Thanks for any help.
hey i have the same proble do you find any solution???
billtrz said:
hey i have the same proble do you find any solution???
Click to expand...
Click to collapse
No
I found some custom roms and some software on chinese site, but cant flash them and I think it's because bootloader isn't unlocked. I tried unlocking it but no luck (using android sdk).
can you give me backup you made,i have twrp recovery,if you want it i can give it to you but pleas help me with that backup
daithi2233 said:
can you give me backup you made,i have twrp recovery,if you want it i can give it to you but pleas help me with that backup
Click to expand...
Click to collapse
I have twrp for this phone, but I cant flash it. Every time I try to send a command in fastboot mode I get the message: "FAILED (remote: unknown command)". How did you flash it? Did your bootloader was unlocked in developer settings? Mine wasn't so I think I'm screwed.
Backup I have is with my personal data.
MaX2oo said:
I have twrp for this phone, but I cant flash it. Every time I try to send a command in fastboot mode I get the message: "FAILED (remote: unknown command)". How did you flash it? Did your bootloader was unlocked in developer settings? Mine wasn't so I think I'm screwed.
Backup I have is with my personal data.
Click to expand...
Click to collapse
then you shuld get your phone in official service,i send my and they said they are going to fix it,and i installed twrp whyle my phone worked with flashify i think
Hello ppl!
Is yours problems solved? I have soft bricked Coolpad Modena E501_EU and can't find solution.
Searching everywhere on internet, not find nothing about that phone: kernels, drivers, firmwares etc., like "ghost phone". Firmware version 4.4 is for E501-Y76-Sky but not for EU model and cannot be flashed. I need stock 5.1.222.........Y76_U00 and if can someone make backup and upload somewhere he helped me a lot.
Hello,
I need a stock recovery and stock rom for Huawei ShotX (p 7i)
version ATH UL-01
I searched google but unfortunately ineffectively, maybe someone has a link to the above?
shaq8 said:
Hello,
I need a stock recovery and stock rom for Huawei ShotX (p 7i)
version ATH UL-01
I searched google but unfortunately ineffectively, maybe someone has a link to the above?
Click to expand...
Click to collapse
I think you should flash the stock firmware
ok, but how? I currently have twrp not a stock recovery. from what I read to reflash stock rom, should have stock recovery because at trwp can not be done. I understand that as a stock firmware You understand the stock rom? or maybe something else?
@shaq8 you posted in the wrong forum buddy.
But to answer your question I found a Lollipop stock package for your device.
Thanks for the link DigiGoon
but how to flash new firmware? All descriptions refer to the dload method, which I can not use because I do not have stock recovery. Is there any method to reflash new firmware having trwp instaled?
and in fact my mistake. the topic was to be started in the P7 section. If an admin will go on this thread , please transferred to the Huawei P7 section
shaq8 said:
Thanks for the link DigiGoon
but how to flash new firmware? All descriptions refer to the dload method, which I can not use because I do not have stock recovery. Is there any method to reflash new firmware having trwp instaled?
and in fact my mistake. the topic was to be started in the P7 section. If an admin will go on this thread , please transferred to the Huawei P7 section
Click to expand...
Click to collapse
No worries, I'll help you regardless of in which section your thread resides.
So, to flash the UPDATE.APP, follow these steps:
First download the package from the link I provided.
Extract it, and find UPDATE.APP
Now you have to extract the stock recovery from UPDATE.APP using Huawei UPDATE Extractor tool.
After pulling recovery.img you have to flash it to your device via bootloader.
Boot into bootloader mode and flash the recovery by firing this command:
Code:
fastboot flash recovery recovery.img
Now you have Stock recovery installed.
I hope you are on Lollipop only, if your device was rooted, you have to first flash .img files manually and then force update it via UPDATE.APP.
If your device is not rooted then put the UPDATE.APP in dload folder in your External SDCARD, and press the three button combo after switching off your device, the update process will start then.
I hope this clears something.
the phone has root.
Custom recovery already loaded and working.
I understand that now I have a reflash of all files from update.app? the sequence of flashing files has any meaning?
I ask because I would not want to mess up more in the phone
shaq8 said:
the phone has root.
Custom recovery already loaded and working.
I understand that now I have a reflash of all files from update.app? the sequence of flashing files has any meaning?
I ask because I would not want to mess up more in the phone
Click to expand...
Click to collapse
No, you can flash them in any sequence. It doesn't effect in any way.
everything works, phone alive
DigiGoon thank you very much for your help, you saved my life
i have the same broblam but i did not understand anything
I got it fixed by just flashing the stock recovery instead of full ROM.
Stock Recovery here :
https://forum.xda-developers.com/honor-7/development/recovery-huawei-shot-x-aka-honor-7i-t3548163
i hve update my device huawei ATH-TLOOH,but when i try to reflash it through bootloader,it show error(Unlock frp first)
But by device is not started,i try to unlock it through frp erase tool bt it asks 16 digit unlock key,
my mobile is hong kong made,i cant find imie num bcz on the back of my mobile there is chinese language and no imie num is written...
em suck and helpless cant understand what to do...
cant find exact firmware version but if find it says software installation failed also...plz help me
Hi guys,
i hope you can help me
i tried this guide and wanted to install cuoco92.
everything went well at first but i had the problem that the chinese desktop pages did not disappear.
so while downloading another rom i wanted to install xposed.
xposed killed my gui and i could not get rid of it to fix the problem so i used the wrong method to wipe data...
now i am stuck with a le max 2 i can only boot to twrp and fastboot. how can i flash a new rom via usb? or get a zip on my phone to flash with twrp?
when i try the sideload function in adb it tells me " cannot read 'asdasd.zip "
please help...
https://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
edit: ok i found out about the "push" function to get a zip to my phone
HELP!!
TLDR:
I bricked pixi 4-6 8050e by flashing it with SPFT [format all + download] option. Can't go into fastboot, but I can still flash using SPFT). Help please!
At first I was just trying to get root. So I needed to unlock BL the flash recovery (twrp).
But recovery image was wrong so I was stuck at bootloop. I found that there is another working recovery (ctr).
I flashed again, but I'm still stuck at bootloop! At this point all I want is to get the device working, root be damned!
So I tried to find a stock ROM and extract the recovery.img from it. I flashed the stock ROM with SPFT, but I'm still on bootloop.
At this point I'm sweating a lot, but I can still access fastboot.
Then I tried to flash the WHOLE stock ROM by using SPFT [download] option.
After that, I was still stuck at bootloop. Worse, the boot animation for alcatel is now ****ed up, it is not showing properly!
I don't know what to do, I downloaded another stock rom, only to find out that it has the exact same files by using hash checker.
I flashed it 1st with [Download] option but nothing changed.
So I flashed again using [Format All + Download] option on SPFT. This is where I really ****ed up. I now can't even access fastboot! But I can still flash using SPFT.
I downloaded final ROM from xda, but again, it has the same exact files! I again tried to flash it, but nothing still works, cannot even go to fastboot.
I even downloaded Alcatel's mobile upgrade s program to fix, but it says "Read terminal information failed". I'm guessing that it the downloaded preloaded.img from the supposedly stock rom is wrong.
I don't know what to do next.
Please help! If any of you have a stock image that is not the same with kirito9's (link), please I NEEED IT!
I need help urgently. I have a p20 lite ane-lx2 that had an update and got bricked. I tried the dload methot on my SD card but no luck keeps on telling me fail to do update. I have tried all the stuff on this forum with no sucsess.. Please please help my battery also does not charge the phone anymore since this happen.. I have read some stuff around that it can be done by adb tool. But I'm a noob.. I please need help I have taken it in to suppliers but they say they can't do anything.. I can boot up into download mode but goed to 5 persent then reboots.. Can go to recovery mode byt phone and frp is locked. And if I boot normally it just gets stuck to system apdate fail and error codes.. Please help
This answer have 2 solutions
1 st solution - using SP flash tool
download android oreo, ANE-L01C432B144 – 8.0.0.144 – Europe
https://www.getdroidtips.com/huawei-p20-lite-b144-oreo-update/
flash stock ROM via SP flash tool
https://flashingguide.com/huawei/how-to-flash-huawei-p20-lite/
---------------------------------------------------------------------------
2 nd solution - using fastboot (adb, terminal, manual, harder, but less likely can go wrong if you follow steps)
https://unofficialtwrp.com/huawei-p20-lite-root-twrp/
just skip step of rooting.
but you need unlocked bootloader:
https://unofficialtwrp.com/how-to-unlock-bootloader-on-huawei-phone-2019-working/
when you flash twrp you need to flash stock ROM via TWRP recovery
download android oreo, ANE-L01C432B144 – 8.0.0.144 – Europe
https://www.getdroidtips.com/huawei-p20-lite-b144-oreo-update/
open TWRP recovery and transfer downloaded stock ROM in phone and flash via TWRP
https://www.theandroidsoul.com/how-to-install-a-custom-rom-using-twrp-recovery/
and it should do just fine
--------------------
sorry if answer look too hard to understand, just follow instructions on links and my answer how to do it, and it will work