I had a Lenovo s860, so basically every 3 to 4 months, I have to flash the stock firmware to the phone, because my phone will brick on its own(Black screen, no response at all, force switch off[Volume up button+power button],switch on again takes forever.
So I am pretty get used to how to flash my phone, I know every step,so on yesterday, ****s happen again, but this time, when i tried to flash it give me this error
"Message: BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
", the flash process stops at 25%.
I though no big deal, sometimes it fails for the first time, so i flash it again and again, format and flash, downloaded higher version of SP tool, downloaded another version of firmware, restart my PC, system restore my PC, and still, it wont flash.
Then I managed to flashed TWRP into my phone, and it is working. And I tried to install firmware ZIP by using OTG, but nothing shows up.
I really need help.
Im having the same problem.
Did you manage to solve this problem?
Related
After factory reset I get "setup wizard has stopped" but I'm not able to flash my rom
Hi all
this is my first post so please be nice to me if I do something wrong.
Ok, where to begin with my long list of problems...
1. I have an Evercoss A28b bought in Indonesia but manufactured in China. It has Mediatek 6972 and SW version is ALPS.JB3.MP.V1.40 (that's what I could find in the phone's factory mode)
2. I rooted it 2 months ago and put all my apps and data on it from my old phone with Titanium Backup. I had some minor problems in the beginning but fixed them all and the phone was running smoothly.
3. This morning I froze "Go Launcher Z" because I didn't like it anymore and wanted to try how my phone looks withour it. Since the moment I froze the app nothing happened. I couldn't access the home screen or the app drawer but only my recently used apps when pressing and holding the home button.
4. I wanted to reboot my phone but it kept booting and booting, saying "android is upgrading" all the time. After one hour I took out the battery and now it's dead.
5. I tried to reset it into factory mode and first it seemed to work because it asked me to do all the settings like language, google account etc. As soon as I was finished a window appeared with "unfortunately setup wizard has stopped" and now I can't even see my homescreen or anything. My screen is black apart from the battery, wifi and SIM icons in the top right corner.
Now, what I tried to do:
1. I googled and found a few solutions saying I should flash my rom. I googled and found the sp flash tool and a rom for my phone.
2. SP Flash Tool did not recognize my phone and there was no scatter file in that ZIP file that I had downloaded.
3. I downloaded MTKdroidtools to try to generate a scatter file from my phone and a lot of different drivers but none of them made my phone connect with DroidTools.
4. So I went back to SP Flash Tool and googled for hours in order to find a scatter file and make my phone connect with SP Flash Tool. I managed to find another rom, this one had a scatter file in it and I also managed somehow to connect my phone with SP Flash Tools. It was only recognized after I had selected the scatter file and pressed the download button though.
5. SP Flash Tools brought an error message saying my pmt has changed and I need a new one or something like that. Unfortunately I can't even re-do this to give you the correct error message because I can not connect my phone to the PC any longer. Everytime I do this with battery or without it keeps connecting and disconnecting all the time.
6. I am at my wits ends and don't know what to do any more.
Please help
Hi, I have the BLU Energy X, and I had flashed some ZIP mods via TWRP. I decided that I didn't want them, and read somewhere that I had to flash my phone using the stock ROM. I used the ROM from NeedRom here: needrom[.com]/ download/ blu-energy-x-e010q which should be the correct one for my phone. It also shows the . I installed proper drivers and flashed using smartphone flash tool. It completed, and I unplugged my phone and pressed the power button. Nothing happened. No combination of power and volume buttons turn this phone on. I have tried flashing again, and I got the error "BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0)". My phone does show up in Device Manager when I plug it in, as USB Serial Device (COM6) under the Ports category. Sometimes it will go in a loop of SHowing up then 3-5 seconds disconnecting from PC, then connecting again. Before I flashed I used the format option because I was getting an error, and that was the fix for it. The flash completed successfully. I did not touch the device while it was flashing, or the USB cable. I'm in grade 8 and I get a really allowance, so I couldn't buy this phone for about 8-10 months again, and I really want to avoid that. I am/was rooted, if that helps. Thanks everyone here in advance, and I really hope you guys know how to fix this! Thanks alot
I was facing an issue with the phone being stuck in logo screen.I tried to wipe the user data and was unable to do so via recovery.So I flashed the phone with stock rom using Sp Flash tool.Still it once again remained stuck in logo screen.So I tried to format the phone and after that the phone is dead , It does not charge nor power up.I once again tried with format all and download and sp flash tool flashed it successfully and showed the okay screen.The flashing process is happening but the phone does not boot on pressing the power button.It is like totaly dead.Except the only thing that recognizes my phone is the flash tool.Even my laptop which runs on Ubuntu 16.04 does not show any kind of indication on connecting.Please give me a solution.I am very panicked.
How I encountered this problem:
1.Since I was stuck at the boot loop.I tried to wipe data entirely through recovery.There was mount error due to encryption.So my only chance was at flashing the phone.
2.I had 3 version of stock Rom for 3 different build(I didn't know my build no).I tried flashing them all but all the 3 flashed successfully but the result was
same.Stuck at bootloop.I found out this might be because I was unable to wipe the data from phone.
3.So I wiped the entire data using sp flash tool using the format flash except boot loader option.
4.After that I had 3 versions of stock Rom with me for different build no.And I think I flashed the one with
the build no which was not meant for my phone.
5.The flashing was successfull.But the phone was dead.
6.Then once again I reflashed other version during which once the flashing was interrupted.
7.Finally I flashed the correct Stock rom version for my build no.Because It was in the end I found out my build no.
8.The flashing was successfull except the phone is still dead.
Observations:
A.Memory Test:
1.ERROR:NAND FLASH NOT DETECTED.(This was present even before the phone became dead .ie when it was stuck at the boot loop after flashing the firmwares).
2.ERROR:UFS not detected.(This was present even before the phone became dead .ie when it was stuck at the boot loop).
Rest went well.The memory test in the end showed the okay message.
B.Format option:
Now the format option does not work.
When I try to format the phone once again using sp flashtool format whole flash except bootloader.It says ERROR : S_DL_READ_PT_FAIL (5073).
what went well?
I am able to download the preloader first and then seperately download rest of the components.
This I am able to do with and without the battery.
what didnt go well?
1.The phone is still dead.No reaction from the phone on pressing any button.
2.Phone LED does not blink or light up on connecting with or without battery to the wall charger or laptop.
3.The screen is black.
I have a question.
should I try the format whole flash option and not format whole flash except boot loader?
I did not try this since latest version doesnt have this.And there are many people who have encountered problems too with that option.
PLEASE HELP ME.THANK YOU.
pjseven said:
I was facing an issue with the phone being stuck in logo screen.I tried to wipe the user data and was unable to do so via recovery.So I flashed the phone with stock rom using Sp Flash tool.Still it once again remained stuck in logo screen.So I tried to format the phone and after that the phone is dead , It does not charge nor power up.I once again tried with format all and download and sp flash tool flashed it successfully and showed the okay screen.The flashing process is happening but the phone does not boot on pressing the power button.It is like totaly dead.Except the only thing that recognizes my phone is the flash tool.Even my laptop which runs on Ubuntu 16.04 does not show any kind of indication on connecting.Please give me a solution.I am very panicked.
How I encountered this problem:
1.Since I was stuck at the boot loop.I tried to wipe data entirely through recovery.There was mount error due to encryption.So my only chance was at flashing the phone.
2.I had 3 version of stock Rom for 3 different build(I didn't know my build no).I tried flashing them all but all the 3 flashed successfully but the result was
same.Stuck at bootloop.I found out this might be because I was unable to wipe the data from phone.
3.So I wiped the entire data using sp flash tool using the format flash except boot loader option.
4.After that I had 3 versions of stock Rom with me for different build no.And I think I flashed the one with
the build no which was not meant for my phone.
5.The flashing was successfull.But the phone was dead.
6.Then once again I reflashed other version during which once the flashing was interrupted.
7.Finally I flashed the correct Stock rom version for my build no.Because It was in the end I found out my build no.
8.The flashing was successfull except the phone is still dead.
Observations:
A.Memory Test:
1.ERROR:NAND FLASH NOT DETECTED.(This was present even before the phone became dead .ie when it was stuck at the boot loop after flashing the firmwares).
2.ERROR:UFS not detected.(This was present even before the phone became dead .ie when it was stuck at the boot loop).
Rest went well.The memory test in the end showed the okay message.
B.Format option:
Now the format option does not work.
When I try to format the phone once again using sp flashtool format whole flash except bootloader.It says ERROR : S_DL_READ_PT_FAIL (5073).
what went well?
I am able to download the preloader first and then seperately download rest of the components.
This I am able to do with and without the battery.
what didnt go well?
1.The phone is still dead.No reaction from the phone on pressing any button.
2.Phone LED does not blink or light up on connecting with or without battery to the wall charger or laptop.
3.The screen is black.
I have a question.
should I try the format whole flash option and not format whole flash except boot loader?
I did not try this since latest version doesnt have this.And there are many people who have encountered problems too with that option.
PLEASE HELP ME.THANK YOU.
Click to expand...
Click to collapse
Same problem here did you found any solution to this ?
Hello all i have this problem that is bugging me for months now, so my phone suddenly went into bootloop and it's not my first time with this phone doing this but from all the 3 past times i had the bootloop i fixed it by flashing the stock rom and there was only 1 time that my phone got stuck on the green recovery android and i just plug it in my pc and everything worked fine (yes it was weird for me but at the time i thought it was normal).
So now bootloop happen again and i tried reflashing with the stock rom like i used before with spflash tool and i'm always getting stuck on "format 0%" and i get the error of "st_format_" something like this so i tried using fastboot to flash every single image and nothing worked, so after all of this i start to try all kinds of things i found on the internet like, using the fastboot "boot boot.img" and nothing worked i would just get a thing saying "writting boot..." and only would receive a message when my phone battery would be drained out.
So i'm here asking for help if someone know's what's wrong with my phone anything is helpfull, i can provide some info from my phone if anyone wants i will try to add some files with information about my phone.
Thank you.
Phone: Qilive Q4 7" Auchan
CPU: MTK6582
Things i tried:
Miracle box
fastboot using flash/boot/oem unlock and still nothing worked however when i typed "fastboot oem unlock" i would get only 3 dots with infinity waiting time till phone battery would be drained out.
another random scatter file for spflashtool only changed the img names
tried spflashtool to format all except bootloader and still would come with an error of format error and even with the "download only" option i would get an error.
Hello! I posted on the official forum for Blackview but so far I haven't gotten a response. TL;DR, my phone, a Blackview BV5800 PRO, could not boot up (stuck on logo) and using recovery mode doesn't work. I get mounting issues when I try to factory reset, wiping the partition cache, and even mounting it (an option).
So my last resort was to attempt to re-flash the ROM using the provided ROM file by the OEM, which they did have on their forum. The first time around when I downloaded the ROM plus the SP Flash Tool, followed the instructions and all, it appears to be flashing just fine. As soon as it finished with the checkmark on screen, the phone is stuck in a black screen and Windows keeps detecting the device over and over, but nothing happens on the phone. From my research online, this is a feature of all MediaTek devices in an attempt to restore a factory ROM.
Now, when I try to flash again with the SP Flash Tool with the same ROM, I am getting a "STATUS_DA_HASH_MISMATCH" error. Or sometimes i get the "STATUS_BROM_CMD_SEND_DA_FAIL error. At this point, I tried every possible option within the tool itself as well as trying all combinations on the phone Power + Vol down/up/both then plugging it to my PC, nothing. It keeps showing the same error.
Frustrated with this, did I screw up something? Did the preloader corrupt during the first run? I don't know what to do at this point.
snowlite said:
Hello! I posted on the official forum for Blackview but so far I haven't gotten a response. TL;DR, my phone, a Blackview BV5800 PRO, could not boot up (stuck on logo) and using recovery mode doesn't work. I get mounting issues when I try to factory reset, wiping the partition cache, and even mounting it (an option).
So my last resort was to attempt to re-flash the ROM using the provided ROM file by the OEM, which they did have on their forum. The first time around when I downloaded the ROM plus the SP Flash Tool, followed the instructions and all, it appears to be flashing just fine. As soon as it finished with the checkmark on screen, the phone is stuck in a black screen and Windows keeps detecting the device over and over, but nothing happens on the phone. From my research online, this is a feature of all MediaTek devices in an attempt to restore a factory ROM.
Now, when I try to flash again with the SP Flash Tool with the same ROM, I am getting a "STATUS_DA_HASH_MISMATCH" error. Or sometimes i get the "STATUS_BROM_CMD_SEND_DA_FAIL error. At this point, I tried every possible option within the tool itself as well as trying all combinations on the phone Power + Vol down/up/both then plugging it to my PC, nothing. It keeps showing the same error.
Frustrated with this, did I screw up something? Did the preloader corrupt during the first run? I don't know what to do at this point.
Click to expand...
Click to collapse
hey..
did u solve ur pb..? i have another phone wihch called blackview A60 pro i m getting same error.. it was working fine then suddenly dead..and no flashing or etc..