Hello guys,
Yesterday i received an OTA Update to 7.1.1 and downloaded it and beggining the installation.
After that my phone doesnt boot anymore and keep appearing the message:
AP Fastboot Flash Mode (Secure)
failed to validate recovery image
ERROR: Failed to pass validation, backup to fastboot
I tried to install RSD Lite but my pc doesnt recognize my phone as "connected".
Please give me some help.
Reflashing a factoty image via fastboot could help. There are already some threads here, which will help you.
I followed this and got 7.1.1 by OTA right after installing. Using minimal ADB and fastboot to flash it worked fine.https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
supacrazyguy42 said:
I followed this and got 7.1.1 by OTA right after installing. Using minimal ADB and fastboot to flash it worked fine.https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
Click to expand...
Click to collapse
Thanks my friend, I'll try this.
Is there a way to unlock my bootloader without enable the oem unlock on the phone?
My phone is stucked on 'AP Fastboot Flash Mode (secure)'.
Please give me some light guys.
Maybe there's an issue with the ota for 7.1.1. I got it here in the UK last night. It was working fine on 7.1.1 from what I could tell until the phone died later on the phone now will only boot to the no command screen. Tried hard reset but it doesn't help. Motorola have requested it sent for repair. Is this the same issue?
I have exactly the same darned problem!!! Motorola chat are worse than useless, simply following a flow chart with no knowledge.
bakerboy said:
I have exactly the same darned problem!!! Motorola chat are worse than useless, simply following a flow chart with no knowledge.
Click to expand...
Click to collapse
Yes the chat is like any other companies non tech savvy person following a script in fact it could quite easily be a bot haha. Anyway I got through the process and received a prepaid DHL label and have sent the phone for repair. Luckily my phone is under warranty I feel sorry for anyone with this problem and out of warranty I'm not sure how that would work even though the problem has arisen through Motorola's update.
Anyway I'll keep you updated on the outcome.
boromat said:
Maybe there's an issue with the ota for 7.1.1. I got it here in the UK last night. It was working fine on 7.1.1 from what I could tell until the phone died later on the phone now will only boot to the no command screen. Tried hard reset but it doesn't help. Motorola have requested it sent for repair. Is this the same issue?
Click to expand...
Click to collapse
Any solution? just one hour ago after power off and power on my phone it does not boot any more, only the same no command screen. I just updated to 7.1.1 the last thursday and all worked very well until today. Ha ha ha O just jumped from LG for the infamous boot loop problem with my G4 and now this. RETMX moto z.
Sent from my Redmi Note 4 using XDA-Developers Legacy app
---------- Post added at 10:44 AM ---------- Previous post was at 10:21 AM ----------
This working for me, enter into recovery Mode: press power and volume down at the same time then select recovey and you will see the same no command screen, then press power and volume up Keys at the same time, you will be enter in recovery mode, select mount system wait until complete, then select clean cache and wait until complete, now select power off, then try to power up your phone. If it does not result at the first time, try again. With this steps my phone turn on again.
Sent from my Redmi Note 4 using XDA-Developers Legacy app
the problem persist if I turn off the phone, unable to boot the phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wtf with Lenovo / Motorola really is so dificult to they make something good? , this phone is crap.
Sent from my Redmi Note 4 using XDA-Developers Legacy app
pacherecords said:
the problem persist if I turn off the phone, unable to boot the phone.
Wtf with Lenovo / Motorola really is so dificult to they make something good? , this phone is crap.
Click to expand...
Click to collapse
Try this at the screen shown in your post :
1 press AND HOLD the power button
2 press the volume up button
You should see the recovery menu below
The volume buttons navigate the menu
3 First try Mount /system
4 Then try Wipe cache partition
5 Then Reboot
It worked for me once
lollyjay said:
Try this at the screen shown in your post :
1 press AND HOLD the power button
2 press the volume up button
You should see the recovery menu below
The volume buttons navigate the menu
3 First try Mount /system
4 Then try Wipe cache partition
5 Then Reboot
It worked for me once
Click to expand...
Click to collapse
I think that the problem is related to the micro sd card, just a few minutes ago I can reboot my phone but without the card. This problem begin after the ota update. I made a backup of the card and format it but the problem persist, trying to reboot with the card inserted im the phone but it enter into bootloop, I make some test to the card with my pc and other phone and the card is ok.
Sent from my Redmi Note 4 using XDA-Developers Legacy app
pacherecords said:
I think that the problem is related to the micro sd card, just a few minutes ago I can reboot my phone but without the card. This problem begin after the ota update. I made a backup of the card and format it but the problem persist, trying to reboot with the card inserted im the phone but it enter into bootloop, I make some test to the card with my pc and other phone and the card is ok.
Click to expand...
Click to collapse
That's good to know. What is the exact information on the SD card? Maybe we should not use it.
I am aware of some 128GB cards causing problems with booting
lollyjay said:
That's good to know. What is the exact information on the SD card? Maybe we should not use it.
I am aware of some 128GB cards causing problems with booting
Click to expand...
Click to collapse
I use a 128 gb Samsung evo select UHS-1, but I use this card with my Moto Z since october with Android 6.0 without problems.
Sent from my Redmi Note 4 using XDA-Developers Legacy app
pacherecords said:
I use a 128 gb Samsung evo select UHS-1, but I use this card with my Moto Z since october with Android 6.0 without problems.
Click to expand...
Click to collapse
Yes I think 7.1.1 has a problem with that one
lollyjay said:
Yes I think 7.1.1 has a problem with that one
Click to expand...
Click to collapse
Hi, only an update, after a little investigation a lot of Moto G4 plus had the same problem just after nougat update, all of them use Samsung evo 128gb cards and format the card using the phone does not make the things better. The last night I perform a format process to my sd card using my Windows 10 lap top , but I select long format (well uncheck the quick format box). I insert the card to the phone and the phone ask to format the card, I select as external storage after complete I turn off the phone and it boot without problems, I power off the phone a cuple of times and Works good.
Maybe this is the solution.
Sent from my Redmi Note 4 using XDA-Developers Legacy app
Hi all..
Same issue here.. Moto Z Droid.. updated to 7.1.1 via OTA yesterday... things were OK... saw some weird issues (not sure if they were related or just issues in general).... I decided to reboot my phone... and I can no longer boot.
Every boot results in the "No command" screen. Clicking "Volume Up + Power" for a few seconds (then releasing volume, then power) drops me into Android Recovery....
I've tried clearing cache .. "Mount /system" .. everything short of factory reset.
I don't currently have access to a SIM-eject tool to try booting up the phone without SD card. Will do this once I get home. Looking back into my order history, my SD card is: Samsung Evo Plus mc128d 128gb Uhs-i Class 10 Micro SD Card
I've tried scanning the logs from "View recovery logs", but didn't see anything that stood out.
amcq1010 said:
Hi all..
Same issue here.. Moto Z Droid.. updated to 7.1.1 via OTA yesterday... things were OK... saw some weird issues (not sure if they were related or just issues in general).... I decided to reboot my phone... and I can no longer boot.
Every boot results in the "No command" screen. Clicking "Volume Up + Power" for a few seconds (then releasing volume, then power) drops me into Android Recovery....
I've tried clearing cache .. "Mount /system" .. everything short of factory reset.
I don't currently have access to a SIM-eject tool to try booting up the phone without SD card. Will do this once I get home. Looking back into my order history, my SD card is: Samsung Evo Plus mc128d 128gb Uhs-i Class 10 Micro SD Card
I've tried scanning the logs from "View recovery logs", but didn't see anything that stood out.
Click to expand...
Click to collapse
Your SD card is almost certainly the problem. I think that after you remove the SD card you will be able to boot.
lollyjay said:
Your SD card is almost certainly the problem. I think that after you remove the SD card you will be able to boot.
Click to expand...
Click to collapse
I'll attempt to read through this thread again.. but, after removing SD and booting successfully (in the process now)... can I expect to be able to put it back in and be ok? Or, does it seem that this specific type of card will "never" work with 7.1.1?
I really wish I could boot it up far enough to be able to decrypt that SD to see exactly what is on it.
And lastly, is there any evidence as to which 128GB cards work on 7.1.1 with the Moto Z's?
lollyjay.. thanks for your quick reply.
amcq1010 said:
I'll attempt to read through this thread again.. but, after removing SD and booting successfully (in the process now)... can I expect to be able to put it back in and be ok? Or, does it seem that this specific type of card will "never" work with 7.1.1?
I really wish I could boot it up far enough to be able to decrypt that SD to see exactly what is on it.
And lastly, is there any evidence as to which 128GB cards work on 7.1.1 with the Moto Z's?
lollyjay.. thanks for your quick reply.
Click to expand...
Click to collapse
I can't say since I have my SD card as external storage
I don't like to use removable storage as extended internal
Related
I know this is told and explained at least hundred times in our forum but every newbie keep on asking about how to do it everytime newbie comes in forum. So here are simple steps to install rom in Atom Life and similar models.
I am requesting all of you, Please do not keep explaining same thing again and again, Just mention this link. Its better and time saving...That's all.
===================================================
HOW TO INSTALL ROM IN ATOM LIFE AND SIMILAR MODELS?
___ by indiacam
------------------------------------------------------------------
USE THIS INFORMATION AT YOUR OWN RISK
1) Take a branded SDCard or good quality SDcard with less than 2GB capacity and format with FAT16 (FAT) in your pc. Bad or cheap SDCard is not detected in most cases.
2) Copy "AL1.DIO" file in the root of SDCard. Do not copy any other file in SDcard. Insert SDCard in Atom.
3) Be sure that battery level is above 75%
4) This is very important step now. Press RECORD key (first key from top at right side of device, see Image-1) and keep it pressing, dont release it. While pressing RECORD key inside, press stylus at bottom and wait until the bootloader screen appear as shown in Image-2.
When Bootloader screen appears you can release RECORD key.
5) If your SDCard is perfect, as shown in Image-2 you will see a line at bottom of bootloader as.....
****Mini-SD DETECTED******
Now you will see the rom is being read from SDCard and percentage will be shown on next line starting from 0% to 100% and again upto around 47%. Thats normal. After that screen will go blank and device will start to restart.
6) You just need to wait for few seconds and rom installation completes. Now you will simply continue as instructed until new Today screen appears. Device may ask you to TAP screen to continue, then Align Screen then enter Region and Date-Time and may be the owner information, etc. Some instructions will not show if rom is customized not to enter such information.
7) Today screen appears and you are done!
Image-1 (Bootloader Reset)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Image-2 (Bootloader page)
FAQ (Frequently Asked Questions) ..... in second post.... <<WORTH READING BEFORE FLASHING
FAQ (Frequently Asked Questions)
1) Can I flash with my CHARGER CONNECTED?
Answer: here >>> http://forum.xda-developers.com/showpost.php?p=5386637&postcount=16
2) After bootreset my device shows bootloader screen as mentioned above but MiniSD Card is not detected.
Answer: There are several reasons why SDCard is not detected....
Possible Reason 1: Your MiniSD card may not be formatted in FAT16 (FAT) format. If you have formatted it in pc, it is possibly formatted with FAT32. Reformat it in FAT16 format and try again.
Possible Reason 2: May be your SDCard is is bigger size than 2GB. The SDCard must be less than 2GB and should be formatted in FAT16 format.
Possible Reason 3: This problem also is caused by unbranded or cheap quality SDCards. Even some unbranded SDCards are not good for installing rom. Try with really good quality SDCard and if fails try with some other.
3) After bootloader, my device did read all the rom from SDCard and showed percentage uptp 100% and then again upto 47% but after that it restart the device system did hung with blank screen. Now nothing is happening and all keys seems not responding' Is my device dead?
Answer: No, may be your device is not yet dead.
Possible Reason 1: It is possible that the ROM file you downloaded might have gone corrupted while downloading or while copying to SDCard. Try downloading again from same location or from Mirror and copy on freshly formatted SDCard. There are several occasions I have found that Rom file was corrupted and it was corrected when new mirror was made available.
Possible Reason 2: It is possible that your battery was not full or at least above 70% when you tried flashing. Flashing may need more power while in process. Be sure battery is above 70% or more. Just leave your battery on charge in same position for some more time and try reflashing.
hi, i'm a noob, n this is my first time having PDA (Atom Life).. i want to ask a simple question.. "is it possible / save to plug charger while flashing?" incase the battery's drop..
hi after the second image nothing happen what can i do for this, pls help me or mail me to [email protected]
Hello friends...
i'm Having some trouble while flashing... i followed all the steps but after this message " Mini SD Detected " Nothing happens...
What could be to possible reason?... please help...
thanks
ghochenk said:
hi, i'm a noob, n this is my first time having PDA (Atom Life).. i want to ask a simple question.. "is it possible / save to plug charger while flashing?" incase the battery's drop..
Click to expand...
Click to collapse
I havent tried it, but based on the first post it is possible.
Flashing Problem
equal said:
Hello friends...
i'm Having some trouble while flashing... i followed all the steps but after this message " Mini SD Detected " Nothing happens...
What could be to possible reason?... please help...
thanks
Click to expand...
Click to collapse
mohamedmisak said:
hi after the second image nothing happen what can i do for this, pls help me or mail me to [email protected]
Click to expand...
Click to collapse
[email protected] & mohamedmisak
Assuming that you have tried the instructions stated on the first post. Try using a branded miniSD as this is maybe the reason to your problem.
Charging while flashing
juliuscezar said:
I havent tried it, but based on the first post it is possible.
Click to expand...
Click to collapse
I have done it many times and never had any problems!
hubie53
Thanks mate, but for some reason even after I followed your steps, I cannot see the bootloader screen. As soon as I press both the record button and click soft reset with stylus, all I can see is the screen keep flashing white every 3 secs or so, and after waited for like 1-2 mins still nothing, just keep flashing...what have I done wrong?? could my Atom life be a newer version or something??
Thanks in advance
homersyd said:
Thanks mate, but for some reason even after I followed your steps, I cannot see the bootloader screen. As soon as I press both the record button and click soft reset with stylus, all I can see is the screen keep flashing white every 3 secs or so, and after waited for like 1-2 mins still nothing, just keep flashing...what have I done wrong?? could my Atom life be a newer version or something??
Thanks in advance
Click to expand...
Click to collapse
Try using a branded or different miniSD...it must be 2Gb or less.
juliuscezar said:
Try using a branded or different miniSD...it must be 2Gb or less.
Click to expand...
Click to collapse
Thanks alot mate, I worked it out in the end, using the same card, it's just a timing problem...
homersyd said:
Thanks mate, but for some reason even after I followed your steps, I cannot see the bootloader screen. As soon as I press both the record button and click soft reset with stylus, all I can see is the screen keep flashing white every 3 secs or so, and after waited for like 1-2 mins still nothing, just keep flashing...what have I done wrong?? could my Atom life be a newer version or something??
Thanks in advance
Click to expand...
Click to collapse
me hv the same problem too! i wonder y~
Hello
This is my problem too!
What was the solution? Did you change the ROM or what did you do?
thx
equal said:
Hello friends...
i'm Having some trouble while flashing... i followed all the steps but after this message " Mini SD Detected " Nothing happens...
What could be to possible reason?... please help...
thanks
Click to expand...
Click to collapse
deftones said:
Hello
This is my problem too!
What was the solution? Did you change the ROM or what did you do?
thx
Click to expand...
Click to collapse
[email protected] and syedazwan
If your stucked on "MiniSD Detected" try using a diffrent branded MiniSD.
DELETED double post...
ghochenk said:
hi, i'm a noob, n this is my first time having PDA (Atom Life).. i want to ask a simple question.. "is it possible / save to plug charger while flashing?" incase the battery's drop..
Click to expand...
Click to collapse
hubie53 said:
I have done it many times and never had any problems!
hubie53
Click to expand...
Click to collapse
Even I confirm this that I have Flashed at least 10 times with CHARGER CONNECTED to "O2 ATOM LIFE" and battery with less than 14%, and it always went smoother and bit faster.
But remember do always as wise people say. If it is said flash with battery only with more than 75% charged.
One more thing, I only confirm that I did this with O2 Atom Life, dont know about other models. Do it only if someone confirms for your model.
what if my SD card is only 1 GB ... is it possible to flash ?
i just got my Atom today i want to flash it with a nice cooked rom
thx ... need your advice
txpxsx said:
what if my SD card is only 1 GB ... is it possible to flash ?
i just got my Atom today i want to flash it with a nice cooked rom
thx ... need your advice
Click to expand...
Click to collapse
Yes, you can flash your Atom Life even with a 2GB miniSD but not SDHC cards.
hi im new here.
i have question.
my phone stuck at o2 logo, and compiouter did not recignise it so i cant put the files for new ROM on SDcard.
cani do it directly from pc.
?
ill be wery hapy if someone help me
ekimovski said:
hi im new here.
i have question.
my phone stuck at o2 logo, and compiouter did not recignise it so i cant put the files for new ROM on SDcard.
cani do it directly from pc.
?
ill be wery hapy if someone help me
Click to expand...
Click to collapse
The procedure can only be done using MiniSD...try using another MiniSD card.
Last night i put my phone on charging and suddenly the " HTC quietly brilliant " screen appeared. I took out the battery because the screen was jammed. Now when i start my phone it just shows the start up screen and then hangs. I tried put it into fast boot > recovery but nothing happens the same screen appears every time for several minutes until I pull out the battery. I don't know what is the reason behind this error.
Don't know what to do ... Please help guys.
ramzie1o1 said:
Last night i put my phone on charging and suddenly the " HTC quietly brilliant " screen appeared. I took out the battery because the screen was jammed. Now when i start my phone it just shows the start up screen and then hangs. I tried put it into fast boot > recovery but nothing happens the same screen appears every time for several minutes until I pull out the battery. I don't know what is the reason behind this error.
Don't know what to do ... Please help guys.
Click to expand...
Click to collapse
i have 2 options for you.
1. wait a little more for it to boot? because it sometimes it take a while to boot up
2. are u sure there are battery left?
try charging it while it is off then try to switch on your phone after 1 min and so
ramzie1o1 said:
Last night i put my phone on charging and suddenly the " HTC quietly brilliant " screen appeared. I took out the battery because the screen was jammed. Now when i start my phone it just shows the start up screen and then hangs. I tried put it into fast boot > recovery but nothing happens the same screen appears every time for several minutes until I pull out the battery. I don't know what is the reason behind this error.
Don't know what to do ... Please help guys.
Click to expand...
Click to collapse
you'll need to give everyone more information to solve your problem
1. What hboot version are you on? (can be found by starting phone up while holding the volume button down)
2. Have you flashed any custom ROMs/Kernels/Recoveries?
It's almost impossible to solve your situation without knowing these things
maybe the battery is dead; use other charger
hcdav said:
you'll need to give everyone more information to solve your problem
1. What hboot version are you on? (can be found by starting phone up while holding the volume button down)
2. Have you flashed any custom ROMs/Kernels/Recoveries?
It's almost impossible to solve your situation without knowing these things
Click to expand...
Click to collapse
I haven't flashed it, purchased it two months ago. Every thing is stock.
When i start it holding the volume down key it says "LOCKED" on the top, highlighted in pink.
hboot version is: 1.24.0000 radio: 1.12.40.03
Thanks
w1040 said:
i have 2 options for you.
1. wait a little more for it to boot? because it sometimes it take a while to boot up
2. are u sure there are battery left?
try charging it while it is off then try to switch on your phone after 1 min and so
Click to expand...
Click to collapse
Thanks buddy i'll give it a go first and then let you know ASAP.
Tried
w1040 said:
i have 2 options for you.
1. wait a little more for it to boot? because it sometimes it take a while to boot up
2. are u sure there are battery left?
try charging it while it is off then try to switch on your phone after 1 min and so
Click to expand...
Click to collapse
I tried it. Charged it for 1h and then turned it on and stared at it for 25 minutes but the phone just showed the start screen and then restarted 4 times the whole time.
Any Thoughts..?? i have no clue whether it is a hardware malfunction or a software problem.
Regards.
ramzie1o1 said:
I tried it. Charged it for 1h and then turned it on and stared at it for 25 minutes but the phone just showed the start screen and then restarted 4 times the whole time.
Any Thoughts..?? i have no clue whether it is a hardware malfunction or a software problem.
Regards.
Click to expand...
Click to collapse
Try a factory reset from bootloader menu if it doesnt help go to HTC service center
Sent from my HTC Desire X using xda premium
They Can't Fix it....
buggingme said:
Try a factory reset from bootloader menu if it doesnt help go to HTC service center
Sent from my HTC Desire X using xda premium
Click to expand...
Click to collapse
I went to the HTC service center, they called me today and they are saying that they cant fix it . Well technically its not the official HTC service center because HTC does not officially supply its products in my country. Its an HTC franchise. They also said that i should re-install its ROM.
ramzie1o1 said:
I went to the HTC service center, they called me today and they are saying that they cant fix it . Well technically its not the official HTC service center because HTC does not officially supply its products in my country. Its an HTC franchise. They also said that i should re-install its ROM.
Click to expand...
Click to collapse
Then you have one option. Unlock your boot loader, flash custom recovery, flash a custom Rom. After that, you can go back to stock using nandroid backup from someone.
Sent from my HTC Desire X using xda app-developers app
it is not getting unlocked
neXus PRIME said:
Then you have one option. Unlock your boot loader, flash custom recovery, flash a custom Rom. After that, you can go back to stock using nandroid backup from someone.
Sent from my HTC Desire X using xda app-developers app
Click to expand...
Click to collapse
I have tried to unlock it several times. but i cannot get the token id. When i run the cmd it says device not found. I have installed drivers for my device but the problem prevails. Is my device dead???
Notes:
I am using this for unlocking my device: Desire_X_All-In-One_Kit_v2.1
ramzie1o1 said:
I have tried to unlock it several times. but i cannot get the token id. When i run the cmd it says device not found. I have installed drivers for my device but the problem prevails. Is my device dead???
Notes:
I am using this for unlocking my device: Desire_X_All-In-One_Kit_v2.1
Click to expand...
Click to collapse
Install newest htc sync to get the drivers. Then you may or may not uninstall htc sync, but keep the drivers. Then try again.
Help me guys
neXus PRIME said:
Then you have one option. Unlock your boot loader, flash custom recovery, flash a custom Rom. After that, you can go back to stock using nandroid backup from someone.
Sent from my HTC Desire X using xda app-developers app
Click to expand...
Click to collapse
I tried to flash recovery but somehow i ended up to this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Its been 10 months now i have tried everything but i cant flash a rom. i tried a bunch of local software guys to flash it for me but they couldnt do it. Nexus Prime bhai help karo yar...
What's your city... I can try to help you in a live chat. Hangouts maybe...
Tell me your windows version.
Desire. X state.
And whether you have data cable and proper drivers installed.
Then download neXus kernel v3 and ckpv5 myonedx+ latest version. Jb rom.
Sent from my C5303 using Tapatalk
stuck on recovery
I cantaccess or copy any thing on sdcard and i cant access external sdcard.
Help me out guys...
INFO
neXus PRIME said:
What's your city... I can try to help you in a live chat. Hangouts maybe...
Tell me your windows version.
Desire. X state.
And whether you have data cable and proper drivers installed.
Then download neXus kernel v3 and ckpv5 myonedx+ latest version. Jb rom.
Sent from my C5303 using Tapatalk
Click to expand...
Click to collapse
yar im in Lahore. live chat can be really helpful or i can visit you, if you are in Lahore.
Im using Windows 7 and and 8.1 both but i used win 7 for the flashing purpose.
I have data cable and drivers installed as you instructed.
hboot version is 1.20.0000
thank you for your quick reply.
regards.
Rameez Butt
Lol....you can recover easily... Just buy a memory card reader and put the rom on SD card that way.... Will cost you 100 rupees max.
Otherwise use any friends mobile to transfer rom on sdcard
In fast boot mode, flash my kernel v3.
And then flash rom from SD card in recovery... That's it
Sent from my C5303 using Tapatalk
---------- Post added at 06:52 PM ---------- Previous post was at 06:51 PM ----------
Have you connected phone to pc in recovery and tried mounting external SD card??
Sent from my C5303 using Tapatalk
ty
neXus PRIME said:
Lol....you can recover easily... Just buy a memory card reader and put the rom on SD card that way.... Will cost you 100 rupees max.
Otherwise use any friends mobile to transfer rom on sdcard
In fast boot mode, flash my kernel v3.
And then flash rom from SD card in recovery... That's it
Sent from my C5303 using Tapatalk
---------- Post added at 06:52 PM ---------- Previous post was at 06:51 PM ----------
Have you connected phone to pc in recovery and tried mounting external SD card??
Sent from my C5303 using Tapatalk
Click to expand...
Click to collapse
Ok i will give it a go and i will inform you asap. Thank you for your help.
no i haven't tried mounting sd card that way, will do.
Thanks again.
Regards.:good:
i did what you instructed but..
neXus PRIME said:
Lol....you can recover easily... Just buy a memory card reader and put the rom on SD card that way.... Will cost you 100 rupees max.
Otherwise use any friends mobile to transfer rom on sdcard
In fast boot mode, flash my kernel v3.
And then flash rom from SD card in recovery... That's it
Sent from my C5303 using Tapatalk
---------- Post added at 06:52 PM ---------- Previous post was at 06:51 PM ----------
Have you connected phone to pc in recovery and tried mounting external SD card??
Sent from my C5303 using Tapatalk
Click to expand...
Click to collapse
I flashed kernel v3 then i copied the myonedx+ rom 4.0 on sd card. th erecovery doesnt load the external card. it should work but its not working in my case.
please help
Just like you flashed neXus kernel.... Now flash any other recovery.... Maybe you have a bugged recovery.
Sent from my C5303 using Tapatalk
Hi guys,
i hope somebody can help this Moto E.
I gift this moto E to a lady, and for this i can't do much test. She is in another country, but she is very smart and she can do nearly all
The model is a dual sim bough in Italy from Amazon, version XT1022. Some days ago, it blocked... without reason. It had continusoly "Unfortunately, Google play service stopped". She tried to do simple things, nothing. Than she tried to do an hard reset with the menu in Android, After this, at boot it went directly in the service menu
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then she tried factory reset , recovery and some other try and it started asking to put language etc etc, but immediatly get the same error she had from beginning:
Than she give the phone to a general services, cause in Armenia doesen't exist Motorola, and now the situation is as the video.
https://www.youtube.com/watch?v=VeC0TTNOgsU
Please help her, it's so much important this phone for her
Many thanks to all
Ale
Install a custom rom, recomend a cm12, cm13.
Do you think is better than try with a stable original FW?
Thanks
yes
alechef said:
Hi guys,
i hope somebody can help this Moto E.
I gift this moto E to a lady, and for this i can't do much test. She is in another country, but she is very smart and she can do nearly all
The model is a dual sim bough in Italy from Amazon, version XT1022. Some days ago, it blocked... without reason. It had continusoly "Unfortunately, Google play service stopped". She tried to do simple things, nothing. Than she tried to do an hard reset with the menu in Android, After this, at boot it went directly in the service menu
Then she tried factory reset , recovery and some other try and it started asking to put language etc etc, but immediatly get the same error she had from beginning:
Than she give the phone to a general services, cause in Armenia doesen't exist Motorola, and now the situation is as the video.
https://www.youtube.com/watch?v=VeC0TTNOgsU
Please help her, it's so much important this phone for her
Many thanks to all
Ale
Click to expand...
Click to collapse
Based on what I saw in the video, the bootloader is still locked. With the bootloader locked you will not be able to install a customer recovery or a custom ROM. The only way to revive this device is by fastboot flashing the factory stock firmware. You can do this with a locked bootloader because the firmware is signed by Motorola. Give this thread a look through. Looks like pretty solid instructions to unbrick this thing.
Sent from my Nexus 6 using XDA-Developers mobile app
Hi dear, which thread you are speaking about? can you give me link?
Thanks
alechef said:
Hi dear, which thread you are speaking about? can you give me link?
Thanks
Click to expand...
Click to collapse
Sorry, I forgot to post the link. This will be the only way to restore the device. Here ya go.
http://forum.xda-developers.com/showthread.php?t=2759495
Sent from my Nexus 6 using XDA-Developers mobile app
Hi, i just found it before, but the stock FW link is death :'( Any suggestions? She has Xt1022, i don't know which version of Android
Thanks
Those are no the original FW, yes?
http://forum.xda-developers.com/showthread.php?t=2755857
Or this one?
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
alechef said:
Those are no the original FW, yes?
http://forum.xda-developers.com/showthread.php?t=2755857
Click to expand...
Click to collapse
I do believe this thread contains the factory images signed by Motorola so they can be installed with fastboot with a locked bootloader.
Sent from my Nexus 6 using XDA-Developers mobile app
---------- Post added at 03:52 PM ---------- Previous post was at 03:50 PM ----------
fast69mopar said:
I do believe this thread contains the factory images signed by Motorola so they can be installed with fastboot with a locked bootloader.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
Just for clarification, this thread does contain the factory image that you will need.
Sent from my Nexus 6 using XDA-Developers mobile app
Thanks much dear
From photo and video you can understand what androd is installed?
Take lollipop from here, http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111, is bad idea ?
Thanks much
Ale
alechef said:
Those are no the original FW, yes?
http://forum.xda-developers.com/showthread.php?t=2755857
Click to expand...
Click to collapse
Download the stock Motorola firmware from here. I would use this thread.
Sent from my Nexus 6 using XDA-Developers mobile app
Not starting Phone
first i've just flash the stock ROM on my moto e and then install the OTA update of android kitkat 4.4.4 and now phone is not starting what should i do I am in trouble pls help ??
whenever i press button there's no response but when i switch it to charging then i press button then notification pulse light start blinking only device is not starting pls help me pls ??
KayneXDA said:
first i've just flash the stock ROM on my moto e and then install the OTA update of android kitkat 4.4.4 and now phone is not starting what should i do I am in trouble pls help ??
whenever i press button there's no response but when i switch it to charging then i press button then notification pulse light start blinking only device is not starting pls help me pls ??
Click to expand...
Click to collapse
Have you tried to use the correct button combination to enter recovery or to enter the bootloader? Also, I'm assuming that you have unlocked the bootloader since you said you flashed the stock firmware. Did you flash the stock firmware using fastboot?
Next question, have you ever rooted or installed a custom recovery on this device?
Use these steps to see if you can enter recovery:
Turn off your Moto E.
Press power + volume up and volume down keys at the same time.
Keep pressing the buttons for about 3 or 4 seconds.The boot menu should be then displayed on your device.
Use the volume down button in order to scroll down until you highlight the recovery option and then press volume up key once.
You should see the Android logo displayed on your Moto E.
At that point press Volume Up and Volume Down buttons for about 5 seconds and press power button once.
In the end the recovery mode menu should be displayed on your phone.
Once you are in recovery mode select wipe data/factory reset.
Then select the reboot option and see if your phone will boot normally.
If for some reason you cannot enter the bootloader menu to select any of the options, connect your Moto E to your PC and look at the device manager to see what your PC recognizes your device as?
Let me know how it goes. Try to be as specific as possible in your next post if you see an error or something happen on the screen. Try to give as much detail as possible.
@KayneXDA - You have completely killed the phone. There are threads warning never to do what you just did.
http://forum.xda-developers.com/moto-e/general/warning-downgrading-information-moto-e-t3062859 @alechef - Download latest Factory Firmware Image for that Model of Moto E. Bootloader can be locked. Your making this more complicated than it needs to be.
Firmware Images: http://forum.xda-developers.com/showthread.php?t=2755857
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2759495
fast69mopar said:
Have you tried to use the correct button combination to enter recovery or to enter the bootloader? Also, I'm assuming that you have unlocked the bootloader since you said you flashed the stock firmware. Did you flash the stock firmware using fastboot?
Next question, have you ever rooted or installed a custom recovery on this device?
Use these steps to see if you can enter recovery:
Turn off your Moto E.
Press power + volume up and volume down keys at the same time.
Keep pressing the buttons for about 3 or 4 seconds.The boot menu should be then displayed on your device.
Use the volume down button in order to scroll down until you highlight the recovery option and then press volume up key once.
You should see the Android logo displayed on your Moto E.
At that point press Volume Up and Volume Down buttons for about 5 seconds and press power button once.
In the end the recovery mode menu should be displayed on your phone.
Once you are in recovery mode select wipe data/factory reset.
Then select the reboot option and see if your phone will boot normally.
If for some reason you cannot enter the bootloader menu to select any of the options, connect your Moto E to your PC and look at the device manager to see what your PC recognizes your device as?
Let me know how it goes. Try to be as specific as possible in your next post if you see an error or something happen on the screen. Try to give as much detail as possible.
Click to expand...
Click to collapse
I insalled the CM 4.4.4 first then i install CM 13 marshmallow then again i install CM 11 (4.4.4) cz marshmallow is lagging so much then i just flash my phone in stock ROM 4.4.2 via fastboot then i just updated the phone to 4.4.4 now m stuck.
there is no response from the phone i've tried every key combination nothing nothing NO RESPONSE :crying::crying:
what should i do pls ??
lost101 said:
@KayneXDA - You have completely killed the phone. There are threads warning never to do what you just did.
http://forum.xda-developers.com/moto-e/general/warning-downgrading-information-moto-e-t3062859 @alechef - Download latest Factory Firmware Image for that Model of Moto E. Bootloader can be locked. Your making this more complicated than it needs to be.
Firmware Images: http://forum.xda-developers.com/showthread.php?t=2755857
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2759495
Click to expand...
Click to collapse
Is there anything i can do ??
KayneXDA said:
Is there anything i can do ??
Click to expand...
Click to collapse
Moto G (1st Gen) got a 5.0 unbrick method recently. Nothing for Moto E (1st Gen) at this time - that I'm aware of.
Follow this thread for developments: http://forum.xda-developers.com/moto-e/general/unbricking-hard-bricked-moto-e-t3306809
Hi I am facing a problem with my moto z, i received the the 7.1.1 update and updated the same.
the first time the phone turned on but it reset after that on its own and i am not being able to get past the boot loader screen.
i am unable to turn on the usb debugging or oem unlock as i cannot even start the phone.
the phone software version shows i am on NPL26-118-20. can anyone suggest what i can do .
arnavde said:
Hi I am facing a problem with my moto z, i received the the 7.1.1 update and updated the same.
the first time the phone turned on but it reset after that on its own and i am not being able to get past the boot loader screen.
i am unable to turn on the usb debugging or oem unlock as i cannot even start the phone.
the phone software version shows i am on NPL26-118-20. can anyone suggest what i can do .
Click to expand...
Click to collapse
If you have an SD Card installed, try removing the SD card and then booting the phone.
If that works... then I bet you have a Samsung 128GB MicroSD card???? (if not, maybe another brand 128GB card?)
It seems that there is something in the 7.1.1 boot sequence for the Moto Z's that is hanging during the mount of the SD Card when it is a Samsung 128GB card. Removal of the SD allows a successful boot up.
Once boot up is complete, you should be able to insert the SD card (without rebooting the phone) and the phone will see the SD card and the "missing SD" notification will go away and the phone will function as it always has. It seems that unless Motorola/Lenovo release a patch for this issue, that your only options are 1) remove SD during every reboot, or 2) purchase a different SD card (Motorola seems to recommend SanDisk).
No there is no SD card. The phone is stuck on bootloader.
I had the same issue, stuck on bootloader and error saying recovery could not be read. I rebooted a few times and it eventually went away. Problem is that now my phone acts REALLY weird. And the Software Assistant does NOTHING to help out. It doesn't detect the phone in regular mode and in fastboot, it says everything is fine and doesn't let me restore.
I have a feeling the OTA had a problem installing and a clean slate is the only way to fix it. The only issue is that I can't find a copy of an XT1560-02 ROM anywhere, only other variants.
I had the same issue after update. Recovery could not be validated. I removed the SD card and boom perfect boot. I just hope the issue gets patched soon, would hate to have to carry that Lil key around for if I need a reboot to remove SD card before boot
Same issue. But instead of removing sd card. Just go into recovery mode and wipe cache.
Works
This helped me. If you can fastboot, this may solve your problem:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
you don't need to root or install TWRP if you don't want to.
I did id, but not luck
maumarti2k said:
This helped me. If you can fastboot, this may solve your problem:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
you don't need to root or install TWRP if you don't want to.
Click to expand...
Click to collapse
I did it, but i couldn't.. nothing happend. Y tried to unlock BootLoader too, cause the first part try something with the BL, and then, when i was unlocking, my phone said: Check 'Allow OEM Unlock' in Android Settings > Developer... And off course i can't, if i have a softbrick....
Well, i lost my warranty now too.
If anyone could help, pls help us. If anyone know how to pass that step in BL, pls tell us...
Ci' vediamo
acalapone said:
I did it, but i couldn't.. nothing happend. Y tried to unlock BootLoader too, cause the first part try something with the BL, and then, when i was unlocking, my phone said: Check 'Allow OEM Unlock' in Android Settings > Developer... And off course i can't, if i have a softbrick....
Well, i lost my warranty now too.
If anyone could help, pls help us. If anyone know how to pass that step in BL, pls tell us...
Ci' vediamo
Click to expand...
Click to collapse
Maybe you could provide more information. Have you been on Stock 7.1.1 and tried to unlock your bootloader without allowing Oem Unlocking in developer options? What is the current state of your device, means are you able to get into recovery mode?
7.1.1 Original Stock - Not Allowed OEM Unlocking
Everything was great, but a week ago the cellphone it restarted itself, and never back: It's stuck in bootloop.
I get it with Android 6.0, and i was upgrading via Ota until 1th July, which that means it's 7.1.1 Rom Stock
Cause i wanted have my cellphone pure, i didnt touch anything(I didn't want loose my warranty), so i'm never check to allow "oem unlocking"
Now, warranty doesn't help me because i bought it in Italia, and im living in Argentina now, and they said taht they have Local Warranty.
So, i tried to solved it by my self... I did it with my old phones but they were cheap, so i think is it that why i never have ear about Reset Software Factory Protection.
Brief:
Original Stock 7.1.1
Yes, i tried unlock BL without Allow OEM Unlocking
Yes, i can get in BootLoader and in fastboot without problem
Thank You very much
Maybe a factory reset might help. Switch off your phone. By holding the power button and the volume down button you get into bootloader mode. Tap volume up until you see recovery. Press power to confirm. (If you see the little green android, hold the power button for 2 sec and then press volume up) In the recovery menue select factory reset, if you choose with data wipe, be aware that you'll lose all your data. After that reboot your system. Hopefully it will boot up and you can set it up from scratch.
I did it.
bullfinch110 said:
Maybe a factory reset might help. Switch off your phone. By holding the power button and the volume down button you get into bootloader mode. Tap volume up until you see recovery. Press power to confirm. (If you see the little green android, hold the power button for 2 sec and then press volume down) In the recovery menue select factory reset, if you choose with data wipe, be aware that you'll lose all your data. After that reboot your system. Hopefully it will boot up and you can set it up from scratch.
Click to expand...
Click to collapse
Thank you very much, i have did it what you said but noyhing happend.
I try updating by ADB Sideload and it didn't starting yet...
This is sad... It is just 2 month old... :crying:
acalapone said:
Thank you very much, i have did it what you said but noyhing happend.
I try updating by ADB Sideload and it didn't starting yet...
This is sad... It is just 2 month old... :crying:
Click to expand...
Click to collapse
1. What happens, if pull out the ext sd-card and then reboot?
2. Which version of stock rom did you download?
3. Download and install RSD-lite on your pc
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=66115
Start RSD-lite on your pc.
Then put your device in bootloader mode and connect it to your pc. Does RSD-lite show, that your device is connected?
bullfinch110 said:
1. What happens, if pull out the ext sd-card and then reboot?
2. Which version of stock rom did you download?
3. Download and install RSD-lite on your pc
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=66115
Start RSD-lite on your pc.
Then put your device in bootloader mode and connect it to your pc. Does RSD-lite show, that your device is connected?
Click to expand...
Click to collapse
With or without SD it's the same... Anyway, i have the phone without SD and SIM now.
I dont know really which version its... I follow and download from this Tuto:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
1- Blur_Version.26.51.19.griffin.retail.en.US.zip
2- GRIFFIN_NPLS25.86-30-12_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
-------------------------------------------------------------------------------------------------------------------------
RSDLite: I download it, and yes, my phone it's showed like connected
PS: Image attached prove it..
Thank you again.
acalapone said:
With or without SD it's the same... Anyway, i have the phone without SD and SIM now.
I dont know really which version its... I follow and download from this Tuto:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
1- Blur_Version.26.51.19.griffin.retail.en.US.zip
2- GRIFFIN_NPLS25.86-30-12_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
-------------------------------------------------------------------------------------------------------------------------
RSDLite: I download it, and yes, my phone it's showed like connected
PS: Image attached prove it..
Thank you again.
Click to expand...
Click to collapse
That's good. (Sorry for the late reply, it was late and i fell asleep).
As i understood you purchased the device in italy and now you live permantly in argentina. Where did you take the 7.1.1 OTA, in Italy or in Argentina?
With the help of RSD we could try to restore your firmware. Not sure if it works for you in Argentina.
1. Download the NPL25...RETBR stockfirmware from here on your pc https://mirrors.lolinet.com/firmware/moto/griffin/official/RETBR/
2. Extract the zip and search for this file: flashall.xml and remember where to find it.
3. Run RSD on your pc
4. Reinsert your simcard (not the sdcard). Put your moto z into bootloader mode and connect it with your pc. Wait until it gets recognized.
4. Click the three little dots in RSD (left beneath the start button). Now search the flashall.xml file and double click. It will be added to the command field.
5. Click start.
RSD should now flash the firmware onto your device. This takes about 10 minutes. Wait untill your moto reboots completely and you get a PASS notification in RSD.
Hope it works. If not, we have to try plan B.
@acalapone i have edited my post above
bullfinch110 said:
That's good. (Sorry for the late reply, it was late and i fell asleep).
As i understood you purchased the device in italy and now you live permantly in argentina. Where did you take the 7.1.1 OTA, in Italy or in Argentina?
With the help of RSD we could try to restore your firmware. Not sure if it works for you in Argentina.
1. Download the NPL25...RETBR stockfirmware from here on your pc https://mirrors.lolinet.com/firmware/moto/griffin/official/RETBR/
2. Extract the zip and search for this file: flashall.xml and remember where to find it.
3. Run RSD on your pc
4. Reinsert your simcard (not the sdcard). Put your moto z into bootloader mode and connect it with your pc. Wait until it gets recognized.
4. Click the three little dots in RSD (left beneath the start button). Now search the flashall.xml file and double click. It will be added to the command field.
5. Click start.
RSD should now flash the firmware onto your device. This takes about 10 minutes. Wait untill your moto reboots completely and you get a PASS notification in RSD.
Hope it works. If not, we have to try plan B.
Click to expand...
Click to collapse
Sorry, i was quite busy...
I bought three: One to my girlfriend, one to my brother(Both are working perfect, like a charm ¬¬) and the cursed one to me, of course!!
Well, when i read "RETBR" i remember that mine cellphone said "RETEU"(or something like that) in settings, so i have checked in my girlfriend's phone, and yeah, they are RETEU and, in the link that you have shared with me, i found one that said that.
I have downloaded both of them, just in case.
Now i'm have try with RETBR, and it didn't work
Now im going to try "RETEU", and, you know, i'm feeling lucky!
Let's cross our fingers
---------- Post added at 12:23 AM ---------- Previous post was at 12:02 AM ----------
Ok, no... It didn't work too.... X-(
I have tried with this one: XT1650-03_GRIFFIN_RETEU-EMEA_6.0.1_MPL24.246-17_cid50_subsidy-DEFAULT_regulatory-03_CFC_EMEA.xml
Yeah, i know... It's 6.0.1 ...
Well, i'm all yours
Thank you anyway...
acalapone said:
Sorry, i was quite busy...
I bought three: One to my girlfriend, one to my brother(Both are working perfect, like a charm ¬¬) and the cursed one to me, of course!!
Well, when i read "RETBR" i remember that mine cellphone said "RETEU"(or something like that) in settings, so i have checked in my girlfriend's phone, and yeah, they are RETEU and, in the link that you have shared with me, i found one that said that.
I have downloaded both of them, just in case.
Now i'm have try with RETBR, and it didn't work
Now im going to try "RETEU", and, you know, i'm feeling lucky!
Let's cross our fingers
---------- Post added at 12:23 AM ---------- Previous post was at 12:02 AM ----------
Ok, no... It didn't work too.... X-(
I have tried with this one: XT1650-03_GRIFFIN_RETEU-EMEA_6.0.1_MPL24.246-17_cid50_subsidy-DEFAULT_regulatory-03_CFC_EMEA.xml
Yeah, i know... It's 6.0.1 ...
Well, i'm all yours
Thank you anyway...
Click to expand...
Click to collapse
You cannot go back to 6.x after updating the bootloader to 7.x
lollyjay said:
You cannot go back to 6.x after updating the bootloader to 7.x
Click to expand...
Click to collapse
Yes, i know it... But in my despair i didn't read it, then.. when fail, i read it.
Thank you anyway
acalapone said:
Yes, i know it... But in my despair i didn't read it, then.. when fail, i read it.
Thank you anyway
Click to expand...
Click to collapse
There is still no RETEU 7.0 available, thats why you have to flash the RETBR.
Try again to flash the RETBR NPL25..firmware with RSD. If you'll get the same failed error message, here is
PLAN B:
Copy the flashall.xml file and rename it to flashallcopy.xml.
Open the copied file with a text editor and delete the 2 lines with "gpt" and "bootloader" in it. Save it and close the copy. With this the RSD program will skip those two commands. Click the 3 dots and add the flashallcopy.xml file to RSD. Click Start.
If that doesn't work, we have to run Plan C
Good luck
My phone was charging and all of a sudden it restarted and got stuck on lockscreen. After 5 seconds it again restarted and again got stuck on lockscreen. I tried factory resetting it, installing new ROM and even flashed MIUI 13 using PE recovery but the problem still persists. I've done factory reset for like 15 times and installed MIUI firmware as well with no luck.
It all happened on its own, I wasn't doing anything to my phone. Please help.
Update: I installed fastboot rom using MI flash tool but the problem still persists.
Is the battery good? It sounds like hardware.
blackhawk said:
Is the battery good? It sounds like hardware.
Click to expand...
Click to collapse
Yes I never encountered any issues with the battery. By the way I've flashed stock rom but still my phone keeps rebooting after showing the welcome screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
munimjaffer said:
Yes I never encountered any issues with the battery. By the way I've flashed stock rom but still my phone keeps rebooting after showing the welcome screen.View attachment 5721763
Click to expand...
Click to collapse
A failed battery be the easy answer; then can fail with no warning and is most likely to happen during the stress of charging. Any swelling is failure! Erratic fast charging is another symptom. If it's capacity has dropped below 80% of its original capacity it's considered degraded and should be replaced. Degraded Li's are more likely to fail.
If the battery can't sink enough current the device won't be able to boot. Although it may sink enough current to open the boot menu which uses far less power.
The next most likely culprit is the mobo if the correct firmware was loaded. However if the battery was weak it may have corrupted the flash. A loose connector or other failed subassembly is also possible.
blackhawk said:
A failed battery be the easy answer; then can fail with no warning and is most likely to happen during the stress of charging. Any swelling is failure! Erratic fast charging is another symptom. If it's capacity has dropped below 80% of its original capacity it's considered degraded and should be replaced. Degraded Li's are more likely to fail.
If the battery can't sink enough current the device won't be able to boot. Although it may sink enough current to open the boot menu which uses far less power.
The next most likely culprit is the mobo if the correct firmware was loaded. However if the battery was weak it may have corrupted the flash. A loose connector or other failed subassembly is also possible.
Click to expand...
Click to collapse
could it be the motherboard? Coz I got my motherboard replaced from official xiaomi store in january.
munimjaffer said:
could it be the motherboard? Coz I got my motherboard replaced from official xiaomi store in january.
Click to expand...
Click to collapse
That make me even more suspicious...
blackhawk said:
That make me even more suspicious...
Click to expand...
Click to collapse
Could it possibly be fixed by relocking the BL and flashing?
munimjaffer said:
Could it possibly be fixed by relocking the BL and flashing?
Click to expand...
Click to collapse
If that's the issue... why is the bootloader unlocked?!
blackhawk said:
If that's the issue... why is the bootloader unlocked?!
Click to expand...
Click to collapse
I'm not sure if thats the issue. Was just asking.
By the way my data partition also seems to be corrupted as TWRP is continuously failing to format data and giving error. But PE recovery would readily format the data without any error.
munimjaffer said:
Yes I never encountered any issues with the battery. By the way I've flashed stock rom but still my phone keeps rebooting after showing the welcome screen.View attachment 5721763
Click to expand...
Click to collapse
One caveat:
You are using a very old official system to fix.
Latest version of Android 11 = V12.5.5.0.RKGMIXM
Latest version of Android 12 = V13.0.10.0.SKGMIXM
If you can't get a clean install in MiFlash and you're doing everything right, it's a hardware error.
StaryMuz said:
One caveat:
You are using a very old official system to fix.
Latest version of Android 11 = V12.5.5.0.RKGMIXM
Latest version of Android 12 = V13.0.10.0.SKGMIXM
If you can't get a clean install in MiFlash and you're doing everything right, it's a hardware error.
Click to expand...
Click to collapse
then it must be a hardware error.
Anyways how do I power it off? It's stuck on boot screen and long pressing the power button results in reboot. Is there any fastboot command to do that?
yea must be battery or mobo problem. if it does not bootloop while plugged in a charger then it's a battery problem. also try banging the back case and the hardware keys especially the power button. maybe something is stuck. if something is loose then you need to have it checked.
munimjaffer said:
then it must be a hardware error.
Anyways how do I power it off? It's stuck on boot screen and long pressing the power button results in reboot. Is there any fastboot command to do that?
Click to expand...
Click to collapse
if u still have access to fastboot then install any custom recovery. it has an option to power it off
Try flashing without Miflash.
Download latest fastboot rom 13.0.10.
Extract fastboot rom files then copy latest fastboot.exe from HERE and paste it inside the folder.
Run flash_all.bat
munimjaffer said:
Yes I never encountered any issues with the battery. By the way I've flashed stock rom but still my phone keeps rebooting after showing the welcome screen.View attachment 5721763
Click to expand...
Click to collapse
The "catch checkpoint" is just a Mi Flash thing.
The ROM is flashed successfuly, but the software is checking one last step, which is failing.
You can safely remove the checkpoint thing in the configuration menu : delete the line "Check Point".
With this checkpoint you will get passed only if you flash and lock your phone.
Source : https://forum.xda-developers.com/t/...nt-fastboot-s-lock-flash-is-not-done.3965649/
munimjaffer said:
My phone was charging and all of a sudden it restarted and got stuck on lockscreen. After 5 seconds it again restarted and again got stuck on lockscreen. I tried factory resetting it, installing new ROM and even flashed MIUI 13 using PE recovery but the problem still persists. I've done factory reset for like 15 times and installed MIUI firmware as well with no luck.
It all happened on its own, I wasn't doing anything to my phone. Please help.
Update: I installed fastboot rom using MI flash tool but the problem still persists.
Click to expand...
Click to collapse
Did you got your issue resolved? Was it a hardware issue?
Hold Volume up and power button . Enter main menu . Reboot from there and it will reboot correctly