Hello guys!
I have a CCE SK504, a brazilian smartphone, and it works nice and all.
But i was trying to change my boot screen animation, when you turn on the cellphone, and i found one wich i liked. the resolution was wrong, so i opened the .zip file and edited the text archive ( 1080 x 1920, i changed to 540x960 that is my phone resolution).
It didn't worked very well
Now, when i turn it on, my phone shows "Android", but freezes in a black screen when the animation is supposed to come, and stays forever until i remove battery.
I can access the download and the recovery mode (by pressing vol + and power)
As the problem is on bootanimation.zip, is there some way to access phone internal files and change it to an valid .zip?
The sdcard works when i connect on pc, my phone is rooted but the recovery is not custom.
Thanks, and sorry about my bad english!
Bumping. thanks!
Bump, actually something happened:
i installed an rom in recovery mode.
Now when i turn the phone on, it shows ANDROID, but stays on a black screen like before...
So i got an friend phone and called my number
My cellphone started to vibrate! also the virtual keys vibrate when i touch then, but the phone stills stay with the black screen.
There is some way to force the image?
I have a Moto G for boost mobile US. I flashed a zip that was supposed to hide the soft keys but after rebooting, it wouldn't go past booting screen so I plugged in the usb to re-flash CM11 but the phone wouldn't show up as a drive on the pc so I couldn't move the zip file to my phone. I freaked out and god knows what I did because after trying to boot into recovery again, all I can see is a fallen android with a red triangle on top and it says "no command"
I installed and reinstalled the motorola drivers but I still cant get the phone to show up as a drive. The bootloader is unlocked, idk if that helps.
Is there any way out of this?
Please help!
Hi guys,
My case is now that I have been trying to flash CM12 to my Z2 Tablet (castor), and i've made a possible huge mistake.
Got Cyanogen Recovery (./fastboot boot boot.img) up and running, but I seem to have fail to remember to authorize my device before starting. In every instance this should not be a problem because nothing have been deleted yet.. You guessed it, that is my problem - system got deleted somehow. In a kinda bootloop now, Sony icon pops up, then the screen goes black.
Now I can't install via Sideload or push because my mac is unauthorized. Failed to find a stock image from Sony and I'm stuck.
Tips for this?
Hello guys, I have run into a serious problem here! Please help me out..
I have a GFive President G9 Android running stock Jelly Bean 4.2.1 (ROOTED). I tried to install a boot animation through ROM Toolbox app, when I rebooted it, it didnt show any boot animation and booted straight to the home screen. So I just went into the ROM ToolBox app and restored the bootanimation backup I had created earlier to get the original GFive boot animation back.
However, when I rebooted, my phone showed the GFive Logo, and after it the screen went dark( The screen is backlit but doesnt display anything). It just stops there and doesnt do anything. Ive tried removing the battery but to no avail. For some reason I CAN'T ACCESS the RECOVERY or the DOWNLOAD MODE, as holding the power button and vol up etc still ends up in the same situation - Black backlit screen after logo. The phone isnt in a reboot loop or anything, it just stops at the black screen for eternity.
THE WORST PART, this phone probably has a damaged USB port, since I was previously able to charge it via the PC, but it wasnt detected in the PC. So I CANNOT CONNECT IT TO THE PC.
So is there anyway I could get this phone back alive? Is a factory reset possible? Please help me experts!! :crying:
P.S Custom TWRP is installed, but I cant access it
So there's no expert in this whole forum who has a solution for this? Because no reply means no one has an answer..
Incase theres no way out of this, please mention that.
Helloooo,
I have a big problem, cant get my phone running again.
The sad thing is, I just got it 4 hours ago
So heres what I have done to my Phone:
I rooted it with Kingo-Root and then installed a app where TWRP was listed, there also was CWM and stuff and I thought I have to flash my phone there with TWRP to install a new ROM and stuff and I clicked there on flash.
Then it asked me if I want to restart in, I cant remember recovery and/or download mode, I clicked yes and from there the trouble began.
When it starts the Coolpad Logo appears, then it say "Download and install the package?", to confirm volume up, to abort volume down. If I press abort, it just goes off, the restart may leads to the battery charging screen ( usb cable is always connected!!), if I press volume up, it says "Information - Do not disconnect data cable", but it says it for forever, nothing happens.
If data cable isnt connected, it shows Logo and then goes off, doesnt do anything.
I wish I would have never done that, Im too stupid for stuff like that.
Can someone help me out?
Hopefully
Hi are you able to enter in TWRP recovery in orden to try to flash him back to stock rom ?
Sadly no
I read some stuff on the internet, and tried it:
I installed andoid studio on my PC, with all that drivers, connected the Phone to my PC and looked it up in the device manager.
Before it was just recognized as "Other devices - Android" without any information, now I had the Hardware ID and put that into the setup text of Google drivers and installed them.
My PC somekind recognizes the phone. (but not like normally)
Maybe i can get the Stock Rom to phone that way somehow?
Edit: its called adb interface in device manager
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
bad support.
Paskebe said:
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
Click to expand...
Click to collapse
Bad support for this phone...
My is dead after 20 days .
Paskebe said:
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
Click to expand...
Click to collapse
That is probably because you flash incompatible firmware which does not recognize display of your device .
Search on the internet for another genuine rom and repeat flashing process .
I had alsmost same issue when I flashed Blu Studio D572i with rom of D572a as I remember , was black screan completely but buttons are working (showing light) .