Im sorry if this isnt the correct subforum, cant find one better as im new and in panic.
I have an Alcatel One Touch Pixi 3 (10) 8079
Recently tried to install a custom recovery with this tut: https://forum.xda-developers.com/showpost.php?p=67953659&postcount=1944 and everything was OK till it finished and then powered OFF device as there was nothing more to do...
Now it doesnt pass the start screen "Alcatel One touch powered by android" with this https://i.imgur.com/RhN9hoM.jpg IN A LOOP.
Tried to hold POWER and VOL+ even POWER and VOL- or just POWER to power off the device but theres no answer from, it just stays on the loop. If i plug the usb, windows sound of usb off and on in a loop too...
Is there something i can do? Can i get helped please? Thanks alot.
Bserda said:
Im sorry if this isnt the correct subforum, cant find one better as im new and in panic.
I have an Alcatel One Touch Pixi 3 (10) 8079
Recently tried to install a custom recovery with this tut: https://forum.xda-developers.com/showpost.php?p=67953659&postcount=1944 and everything was OK till it finished and then powered OFF device as there was nothing more to do...
Now it doesnt pass the start screen "Alcatel One touch powered by android" with this https://i.imgur.com/RhN9hoM.jpg IN A LOOP.
Tried to hold POWER and VOL+ even POWER and VOL- or just POWER to power off the device but theres no answer from, it just stays on the loop. If i plug the usb, windows sound of usb off and on in a loop too...
Is there something i can do? Can i get helped please? Thanks alot.
Click to expand...
Click to collapse
You have wrong twrp image. I had also this problem (like in your picture) and I find another twrp image and put it and now everything is OK.
If you want to use SP Flash tool you must install MTK USB Vcom drivers and also it is not bad to have Mobile_Upgrade_S_Gotu2_v5.0.6 installed (because of drivers).
Related
I tried to Unroot my Galaxy Tab 10.1 LTE last night and think I may have bricked my tablet. I used the instructions here on the XDA forum which had a link to all the Stock ROM's in one place. I got the most recent one and the only one for USA but it said it was for the model 7510. I didn't think that would be a problem since the USB drivers I installed on my PC were also labeled as being for the 7510 and they worked.
This tablet is the SCH-I905. Now I can't get it to boot at all. Gets stuck in a boot loop. Shows the Samsung logo, then resets and does it again. I can't get it in recovery mode either. Goes to a black screen and hangs.
Using the normal process to get to Download mode doesn't work. Holding Power and Volume Up, then letting go of the Power button, then pressing Volume Down and then Up. That's one weird thing. I can get to the option screen that shows the Download and Recovery mode options. Normally I would hit the Volume Down button to select Download mode and on the screen it says to press Volume Up to continue or Volume Down to cancel. If I press Volume Up it goes to a black screen and hangs. If I press Volume Down I get the Odin Download screen that says Waiting on USB cable.
That screen doesn't look the same as what I normally see but I'm not sure what's different. I didn't memorize each line of text. I just know there's not as much text there as there usually is. My PC will not recognize the tablet no matter which USB port I try to use and the tablet doesn't recognize that the USB cable is plugged in. I had no problem with the USB connection before I flashed the 7510 stock ROM.
So, if I cannot get to recovery mode and I can't get Download mode to work so I can use Odin to flash a different rom then is this thing bricked or is there something else I can try? I am about to try using my laptop and its USB ports but I don't think that's going to make any difference.
BTW, I have since found the correct 'stock recovery rom' at droidbasement.com and downloaded it to my PC. I just need to get on the tablet somehow.
Many people have your problem. I have my Lte verizon bricked as yours. The problem is demaged bootloader, only nvflash can fix it but actually our bootloader is locked and we need a hex key called sbk. At least we have to wait that somebody hack our tab from the basement. For now we can only search and share result.
pickupcash said:
I tried to Unroot my Galaxy Tab 10.1 LTE last night and think I may have bricked my tablet. I used the instructions here on the XDA forum which had a link to all the Stock ROM's in one place. I got the most recent one and the only one for USA but it said it was for the model 7510. I didn't think that would be a problem since the USB drivers I installed on my PC were also labeled as being for the 7510 and they worked.
This tablet is the SCH-I905. Now I can't get it to boot at all. Gets stuck in a boot loop. Shows the Samsung logo, then resets and does it again. I can't get it in recovery mode either. Goes to a black screen and hangs.
Using the normal process to get to Download mode doesn't work. Holding Power and Volume Up, then letting go of the Power button, then pressing Volume Down and then Up. That's one weird thing. I can get to the option screen that shows the Download and Recovery mode options. Normally I would hit the Volume Down button to select Download mode and on the screen it says to press Volume Up to continue or Volume Down to cancel. If I press Volume Up it goes to a black screen and hangs. If I press Volume Down I get the Odin Download screen that says Waiting on USB cable.
That screen doesn't look the same as what I normally see but I'm not sure what's different. I didn't memorize each line of text. I just know there's not as much text there as there usually is. My PC will not recognize the tablet no matter which USB port I try to use and the tablet doesn't recognize that the USB cable is plugged in. I had no problem with the USB connection before I flashed the 7510 stock ROM.
So, if I cannot get to recovery mode and I can't get Download mode to work so I can use Odin to flash a different rom then is this thing bricked or is there something else I can try? I am about to try using my laptop and its USB ports but I don't think that's going to make any difference.
BTW, I have since found the correct 'stock recovery rom' at droidbasement.com and downloaded it to my PC. I just need to get on the tablet somehow.
Click to expand...
Click to collapse
Did you solved the issue?
Please share ..., i face the same problem now ...
regards,
erwien.
Did you solved the issue.
share me......i face the same problem now
.
.
.
.
.
.
.
.
.
.
.
.
help me plz
Hi guys.
Right now I'm having some issues with my Tablet. It seems to be bricked. I was trying to flashing it and something failed, but now my PC cannot recognize it and when I tried to turn it on or go to recovery mode, it always stays in the Android Logo (Image attached)
What can I do. I was trying to use uberizer or adb but as the tablet is not recognized by my PC, I just don't know what to do.
Thanks for the help you can give me.
abottoni said:
Hi guys.
Right now I'm having some issues with my Tablet. It seems to be bricked. I was trying to flashing it and something failed, but now my PC cannot recognize it and when I tried to turn it on or go to recovery mode, it always stays in the Android Logo (Image attached)
What can I do. I was trying to use uberizer or adb but as the tablet is not recognized by my PC, I just don't know what to do.
Thanks for the help you can give me.
Click to expand...
Click to collapse
What brand is that tablet? Specs on it? Looks identical to mine. I got mine to flash by using livesuit and the faaastjb v2.5. Start livesuit, select your rom image that you choose. Make sure tablet is unplugged from usb, but plugged into charger, and it is off. Hold the volume up button, then plug the usb in (computer and tablet). Press the power button repeatedly until you hear the windows sound when you plug in a usb device. Once you hear this, stop pressing power, and let go of the volume up button. You should hear the sound in windows like its disconnected, then reconnected and then livesuit will ask if you want a complete flash (erase and flash) or upgrade. Then just let it go.
Hopefully this helps you, and if you do have the same tablet as me, I would be very grateful if you would send me a factory dump so I can get proper drivers!
Hi all,
i got an bootloop at my Presitigo PMP5580C (same as Intenso TAB 814). The recovery mode (Power + vol+) wont work.
How to flash the firmware to the tablet?
I installed Android SDK and the Drivers. But what to do now? What Software did i have to use to flash und what file (Firmware) to flash?
Please help me...
Regards
Hi,
any ideas? I need your help...
I also have such a problem with my PMP5580C DUO.
It just hangs on the Bootscreen with the "The Art Hi-Tech" and the logo.
No chance to get into cwm with power+vol up and even the Hardresetbutton just switches the tablet off.
Can someone help? Or did you find a solution yet?
Thank you very much
W3hrWolf said:
Hi all,
i got an bootloop at my Presitigo PMP5580C (same as Intenso TAB 814). The recovery mode (Power + vol+) wont work.
How to flash the firmware to the tablet?
I installed Android SDK and the Drivers. But what to do now? What Software did i have to use to flash und what file (Firmware) to flash?
Please help me...
Regards
Click to expand...
Click to collapse
Have you tried to put the update.zip file and recovery image on an SD card ?
If not do that then press (Volume +) + (Power) buttons then when the screen flashes stop pressing the (Power) button and keep pressing the (Volume +) button after some time it will start flashing the Tab.
Here is the link if you don't have the update.zip file :
http://www.prestigio.com/catalogue/Archive_products/Multipads/MultiPad_8.0_Pro_Duo#/product-support/firmware
use the 2.0.24 version.
Hope this helps
If not tell me so I can give you another way by using CWM.
Waiting for your reply...
pmp5580c bootloop
Zacktamondo said:
Have you tried to put the update.zip file and recovery image on an SD card ?
If not do that then press (Volume +) + (Power) buttons then when the screen flashes stop pressing the (Power) button and keep pressing the (Volume +) button after some time it will start flashing the Tab.
Here is the link if you don't have the update.zip file :
use the 2.0.24 version.
Hope this helps
If not tell me so I can give you another way by using CWM.
Waiting for your reply...
Click to expand...
Click to collapse
Hi, my friend has the PMP5580c and it too will not go to recovery at all. it just hangs in a boot loop on the start up screen. I have tried the recovery combination, but it does not work. how would I go about flashing the firmware/update.zip file using CWM.
AzahTabor said:
Hi, my friend has the PMP5580c and it too will not go to recovery at all. it just hangs in a boot loop on the start up screen. I have tried the recovery combination, but it does not work. how would I go about flashing the firmware/update.zip file using CWM.
Click to expand...
Click to collapse
Do you have a CWM flashed already or not?
If so then I had this problem before you just need to put the update.zip on the root of the SD card then press the recovery buttons for some time like 2 minutes -some times it takes so long but it works- .
reply to me soon.
Bootloop fixed
Hi Zack.
I was able to get it sorted with fastboot. Needed the laptop to register the m3-chip that it was saying was the tablet. Once that was done, flashed it with the original stock firmware. It now runs like it was brand new.
Thank you all for your time on this matter
AzahTabor said:
Hi Zack.
I was able to get it sorted with fastboot. Needed the laptop to register the m3-chip that it was saying was the tablet. Once that was done, flashed it with the original stock firmware. It now runs like it was brand new.
Thank you all for your time on this matter
Click to expand...
Click to collapse
hi, i have the same fault on the same tablet, how do i fastboot? also when connected to pc it is saying it is a world cup device? thanks in advance
Bricked PMP5580C
Hello
I have bricked my Intenso Tab 814 (same as Prestigio PMP5580C). I formated the bootloader space + the recovery space, and now I can't even turn it on. The backlight of the display isn't glowing up at least. So I used my MicroUSB cable and connected to the computer, it is recognized by the computer, but I can't flash anything back with the amlogic software which I've got, I am really appreciating when someone of you can try to help me out,
thanks in advance,
AMLOGIC
Unbricked Intenso Tab 814
I have successfully unbricked an Intenso Tablet 814 also know as Prestigio PMP5580C! It had no bootloader and all partitions were formatted! This includes the bootloader, means it even showed backlight as I plugged it into the power supply. I got a rescue sd card made with Christian Troys tutorial but my tabket was nit abke to start, because the nand chip was corrupted, so I looked at the nand chip and used a scrwwdriver and put it on the 6 and 5 th point t the right side on the left side is the hole on the nand chip, after that I was able to permitt the access for the nand chip to the mainboard, so it booted from the sd card automaticaly,
Intenso Tab 814 can be unbricked! Yeah, now I need it's source to customize the recovery and boot splash + oneday the os,
Take care!
Bye bye!
Stuck in bootloop intenso tab 724
So the title says it all how can I fix it? No custom recovery only root
I want to install a downgrade 4.4 to 4.3. I downloaded official Firmware. But after flashing i was bricked.
258 Euros are gone. I know what i was doing.
Please help me! (( :crying::crying::crying:
How bricked is it? Can you still get into recovery? Can you at least still turn it off and on?
8080-f dead as a dodo
Hi... just came across this post and searched hi and low through all forum looking for help... I too have a yoga tab bricked, B8080-f model. The only thing it can do is connect as an unknown usb device .. or if you hold power for a minute whilst usb is plugged in... (wait for it to switch off) then unplug usb lead and plug it in again whilst holding volume up Im able to get the quallcomm emergeny port loaded 9008 on com 4.... it wont switch on... wont show the power led when plugged in... its just blank... tried holding power for 60+ seconds as someone said would exit out of meta state or something?? .... its kaput.... all i remember doing is trying to run an update over ota... it found it then dloaded it and rebooted... when installing it failed ... i dloaded a qsb update file and put in sdfuse folder....installed by pressing down volume and holding power to get into lenovo recovery partition and updated that way... once rebooted it never switched on, charged?!?!
Any help would be greatly appreciated...
afaik i just need a factory rom to flash using miflash or emmc??
So i was using RessurectionRemix (a version from last month) and recovery twrp 3.1.0-0 and the phone was working great!
Yesterday i left my phone charging over night and in the morning i wake up to my phone bootlooping!
So i tried different things including everything it says here https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949 without luck
I can get it into recovery and fastboot but as soon as i let the key combination go the phone stops and just shows a black screen (screen is on) and i cant get into qualcomm recovery to flash!
And the only way to shut off the phone is by holding power + vol up + vol down!
Any solution or suggestions?
Use flashone method to unbrick
md07 said:
Use flashone method to unbrick
Click to expand...
Click to collapse
As i already mentioned i cant get into qualcomm recovery so i cant use flashone
try to flash fastboot rom from cucoco's.
Tsoler said:
As i already mentioned i cant get into qualcomm recovery so i cant use flashone
Click to expand...
Click to collapse
connect phone to computer, try force shutdown phone by hard button, ater phone shutdown, immediately release power but keep both volume. Phone maybe will enter Qualcomm flash dead mode, and Flashone will regconize com phone (refresh nedded)
Hope you success ! And believe, if a phone can flash with Qfil or Flashone, almost that phone never die (software)
Are you able to connect to the phone via Vysor, either via Chrome browser or as a standalone app on Windows PC when you do not see anything on the phone screen? Please post if Vysor install goes thru successfully. Hope your developer options/USB debugging are on. I assume your phone boots but may have display issues either hw or sw.
md07 said:
connect phone to computer, try force shutdown phone by hard button, ater phone shutdown, immediately release power but keep both volume. Phone maybe will enter Qualcomm flash dead mode, and Flashone will regconize com phone (refresh nedded)
Hope you success ! And believe, if a phone can flash with Qfil or Flashone, almost that phone never die (software)
Click to expand...
Click to collapse
Did what you said but nothing happens
kayyappan said:
Are you able to connect to the phone via Vysor, either via Chrome browser or as a standalone app on Windows PC when the you do not see anything on the phone screen? Please post if Vysor install goes thru successfully. Hope your developer options/USB debugging are on. I assume your phone boots but may have display issues either hw or sw.
Click to expand...
Click to collapse
Phone gets recognized but not long enough to do anything (windows makes sound but doesn't install anything and doesn't show up in device manager)
try this guide
https://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/
You have mentioned that you are able to see the device in recovery and fastboot till you release the buttons - does this mean if the buttons are held say in fastboot mode you are able to see the device via "fastboot devices" or in recovery the twrp screen or nothing ever shows up at all? Are the buttons clicking properly? Check individually to make sure - particularly the power button. Does it vibrate at any point of time when you press and hold the power button? Are you able to see any backlight when you say the screen is on?
If there no backlight shine a torch or sunlight from the side of the screen to see anything at all on the screen.
Vysor reports apk not installed when it attempts to download from PC to phone but fails. With Vysor you will have two windows one showing status of phone - this is the main window. The other is the mirrored one - that of the phone when you click view on the main window. I forgot that the phone requires approval to install the apk. Please see the attached thumbnails. Keep touching the screen about 3 cms up from the bottom of the screen (not the phone) to see any change. Hope your touch works.
I know it is quite frustrating to try a number of things. I recently went thru the same on Galaxy S4 to make sure the phone but for the screen works OK prior to ordering the screen. Besides in my case developer options was disabled and touch also did not work. It took about a week of learning and trying to see something on Vysor. I never have used a Sam phone till that time this broken phone was handed over to me.
After a lot of trying i found out that when i keep pressed power + vol down or vol up while connected to pc and device is off it gets recognized as
qualcomm hs-usb qdloader 9008 long as i keep the keys pressed so i tried the flashone method but it just says could not connect
Are Qualcomm drivers loaded on your computer? I have not used flashone. I used QPST to see if phone is connected. I am not sure if they are same.
kayyappan said:
You have mentioned that you are able to see the device in recovery and fastboot till you release the buttons - does this mean if the buttons are held say in fastboot mode you are able to see the device via "fastboot devices" or in recovery the twrp screen or nothing ever shows up at all? Are the buttons clicking properly? Check individually to make sure - particularly the power button. Does it vibrate at any point of time when you press and hold the power button? Are you able to see any backlight when you say the screen is on?
If there no backlight shine a torch or sunlight from the side of the screen to see anything at all on the screen.
Vysor reports apk not installed when it attempts to download from PC to phone but fails. With Vysor you will have two windows one showing status of phone - this is the main window. The other is the mirrored one - that of the phone when you click view on the main window. I forgot that the phone requires approval to install the apk. Please see the attached thumbnails. Keep touching the screen about 3 cms up from the bottom of the screen (not the phone) to see any change. Hope your touch works.
I know it is quite frustrating to try a number of things. I recently went thru the same on Galaxy S4 to make sure the phone but for the screen works OK prior to ordering the screen. Besides in my case developer options was disabled and touch also did not work. It took about a week of learning and trying to see something on Vysor. I never have used a Sam phone till that time this broken phone was handed over to me.
Click to expand...
Click to collapse
It doesn't stay long enough in recovery or fastboot to do anything it shuts off after a few seconds even with the buttons pressed after that it just shows a black screen
Phone vibrates when i press power and shows leeco logo (not os logo) and after 1-2 seconds screen goes black and phone vibrates again and shows leeco logo again and just continues looping
if i try to press power + vol up normally it goes into recovery but as soon as recovery is loaded screen goes black (screen on just doesn't show anything) the same goes for fastboot if i press power + vol down it loads fastboot but after 1-2 seconds screen goes black
if i keep pressing keys the phone just stays longer in recovery/fastboot but only 4-5 seconds
I assume you have adb and fastboot. Since you say the screen remains on when booting to recovery open a command prompt at the directory where adb is and issue a command "adb devices" without quotes. Does it just exit without showing any device or throws up some error? Try this irrespective of the black screen.
Have you looked at and tried what is given by @HTC-TYTN2 at post #8? It is for Le Max 2 and you will find a link to Quallcomm drivers too. Do not bother that the link mentions X820 even your Max 2 is 821, 829, etc.
since it happened after charging, you might want to check your cable and battery. best is to get a cheap usb multimeter.
Gesendet von meinem LEX820 mit Tapatalk
I too thought it could be the battery based on that's the screen goes off. But he also mentioned that the screen remains on but nothing to be seen after a short while. Wanted to suggest slow speed charging probably via a laptop usb as I'm not sure if he used high speed charging resulting in battery issue.
Did you solve the problem?
My phone just died completely! No response at all anymore. I'm contacting the seller now to send the phone back.
Looks like it is a hardware defect! A pretty odd one but nothing i can do anymore. I send it back and post what the problem is as soon as get any information.
Thanks to everyone who tried to help!
Tsoler said:
My phone just died completely! No response at all anymore. I'm contacting the seller now to send the phone back.
Looks like it is a hardware defect! A pretty odd one but nothing i can do anymore. I send it back and post what the problem is as soon as get any information.
Thanks to everyone who tried to help!
Click to expand...
Click to collapse
Try this:
https://www.androidfilehost.com/?w=files&flid=136823
download file, unzip, open folder, connect phone to USB via fastboot ( phone off phone + hold volume -) . Click to the flash app in your PC. The app should find the phone. Confirm TWRP problem -NO and start flash.
Drivers must be installed.
Drivers here.
https://uloz.to/!A6B4AmEVx87S/adbdriverinstaller-exe
I can, pass the cuoco rom by qfil? Another type of flash, because I can not access recovery and twrp ?, only by fastboot
RaphaBraga23 said:
I can, pass the cuoco rom by qfil? Another type of flash, because I can not access recovery and twrp , only by fastboot
Click to expand...
Click to collapse
Try this via fastboot mode.:
https://www.androidfilehost.com/?w=files&flid=136823
download file, unzip, open folder, connect phone to USB via fastboot ( phone off phone + hold volume -) . Click to the flash app in your PC. The app should find the phone. Confirm TWRP problem -NO and start flash.
Drivers must be installed.
Drivers here.
https://uloz.to/!A6B4AmEVx87S/adbdriverinstaller-exe