riverwest:
After mistakenly flash G5,XBL,XBL2and MODEM.IMAGE,My v30+ just is a blackbrick,only shows 9008 when it connects with pc! Now I have a octopus box,but it doesnt work! Anybody knows how to unbrick lg v30 via 9008 with octopusbox?
通过我的 1707-A01 上的 Tapatalk发言
moizml said:
riverwest:
After mistakenly flash G5,XBL,XBL2and MODEM.IMAGE,My v30+ just is a blackbrick,only shows 9008 when it connects with pc! Now I have a octopus box,but it doesnt work! Anybody knows how to unbrick lg v30 via 9008 with octopusbox?
通过我的 1707-A01 上的 Tapatalk发言
Click to expand...
Click to collapse
only jtag can solve this problem.
take it to a repairshop.
Found Fix
On eBay there is a guy who will connect to your PC remotely and fix it. I had this done 2 weeks ago, worked perfectly. Costs $35.
KlaeTon said:
On eBay there is a guy who will connect to your PC remotely and fix it. I had this done 2 weeks ago, worked perfectly. Costs $35.
Click to expand...
Click to collapse
Please share link.
Related
hi. i need help, i have huawei g630-u10, and i canot turn on phone, when i conect him to pc i see Qualcomm HS-USB QDLoader 9008. thanks to all!
hi, i am facing this today. did u solved it?
AEZ_BEST said:
hi, i am facing this today. did u solved it?
Click to expand...
Click to collapse
no,i still have that problem
i have the same problem
any solution ?
thanks in advance
shuki11 said:
hi. i need help, i have huawei g630-u10, and i canot turn on phone, when i conect him to pc i see Qualcomm HS-USB QDLoader 9008. thanks to all!
Click to expand...
Click to collapse
Can you boot into recovery ? If you can, you'll have to do a factory reset.
G630-U10 or G6-U10 Bricked
Skr00z said:
Can you boot into recovery ? If you can, you'll have to do a factory reset.
Click to expand...
Click to collapse
Same problem, also tried Qfil, Tool Studio etc but still bricked. waiting for solution.
Don't know its G630-U10 or G6-U10.
Already tried both board repairing firmware's....:crying::crying::crying:
I am new to this forum but have very high hopes that someone with more technical skills will be able to help me with my LG G watch
To start , i bought this new LG G watch and did not turn it on for 3 months after purchase , then i tried to run it on and it never came up , left it on charging overnight many times ,tried reset button and all other tricks i could find with help of Mr. Google except opening it .
So i plugged it in laptop USB port and at first it was showing some "Bulk" in device manager but it managed to get drivers automatically and now shows as HS-USB QDloader 9008 in device manager , than i again asked Mr. Google to help and read several forums and tricks and tips about getting device out of this phase using QPST etc. nothing worked so far.
I also tried LG flash tool but that also fails .
now i am here seeking help , anyone have any idea on how to get this device turned on ?
Is there someone who figured this??? Please help .. I did nothing it has happened suddenly. Now only showing this QDloader 9008.
sasadara said:
Is there someone who figured this??? Please help .. I did nothing it has happened suddenly. Now only showing this QDloader 9008.
Click to expand...
Click to collapse
I hate to say this but, you might be screwed. You should send it in or get a new watch.
Sorry.
drewmrk8 said:
I hate to say this but, you might be screwed. You should send it in or get a new watch.
Sorry.
Click to expand...
Click to collapse
But I didn't do anything. Sadly we have no option here in my country to send the watch back. i have seen that there are threads which unbrick from this state. But unfortunatly all the files are related to LG G3 and G2 and so on. So I don't have necessary files for unbrick Qualcomm. Hope if i could get any help :?
sasadara said:
But I didn't do anything. Sadly we have no option here in my country to send the watch back. i have seen that there are threads which unbrick from this state. But unfortunatly all the files are related to LG G3 and G2 and so on. So I don't have necessary files for unbrick Qualcomm. Hope if i could get any help :?
Click to expand...
Click to collapse
I don't think this would work, but hey, it's worth a shot.
droidsavvy.com/unbrick-qualcomm-mobiles/
Ya I tried before I post this, but it didn't success, im getting an error like this
Sahara Connecting …
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
v QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
No answers for that. May be the incompatible *. xml
sasadara said:
Ya I tried before I post this, but it didn't success, im getting an error like this
Sahara Connecting …
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
v QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
No answers for that. May be the incompatible *. xml
Click to expand...
Click to collapse
I was just searching around and I can't seem to find anything on the topic of an LG G Watch hard brick. Just wondering, did you buy the watch from eBay or a used one from Amazon etc...?
No I have brought from my friend. I have used this like from more than a year ago without any problem. normally i forget to charge. So it will completely out sometimes. Y]Day before yesterday also I forgot to charge. But yesterday I tried to charge, but it didn't turn on. I couldn't charge it. So I just connected to the computer then I saw this mode.
sasadara said:
No I have brought from my friend. I have used this like from more than a year ago without any problem. normally i forget to charge. So it will completely out sometimes. Y]Day before yesterday also I forgot to charge. But yesterday I tried to charge, but it didn't turn on. I couldn't charge it. So I just connected to the computer then I saw this mode.
Click to expand...
Click to collapse
It's also possible that it may just be dead for good, or it might be a defective model.
Moto E is not displaying anything..Notification light blink once when long press power button or while connecting to usb cable..
But my PC detects the phone when connected..Device Manager showing Qualcomm HS-USB QDLoader 9008 .
PLEASE HELP!!!
UPDATED:
I heard that by using QFIL,all qualcomm mobiles could be flashed without fastboot..
Is it possible for MOTO E?
I am having exactly same issue with my Moto E XT1022
coder0000 said:
Moto E is not displaying anything..Notification light blink once when long press power button or while connecting to usb cable..
But my PC detects the phone when connected..Device Manager showing Qualcomm HS-USB QDLoader 9008 .
PLEASE HELP!!!
UPDATED:
I heard that by using QFIL,all qualcomm mobiles could be flashed without fastboot..
Is it possible for MOTO E?
Click to expand...
Click to collapse
Hi, I am having exactly the same issue with Moto E 1st Gen. I just want to if you were ever able to revive your mobile? Please do reply.
MusaddiqueAli said:
Hi, I am having exactly the same issue with Moto E 1st Gen. I just want to if you were ever able to revive your mobile? Please do reply.
Click to expand...
Click to collapse
No..Failed to make it work..
Okay. Thanks for the swift reply.
coder0000 said:
No..Failed to make it work..
Click to expand...
Click to collapse
But by the way, did you try the QFIL method.
MusaddiqueAli said:
But by the way, did you try the QFIL method.
Click to expand...
Click to collapse
Yes you can revive your phone through QFIL. I had. Lenovo a6000 plus and in case of hard brick (when you can't access recovery or fastboot), you can still revive your phone through the Diagnostics port. You need to have a ROW firmware file in my case. I don't have a link for your device. You have to search that for yourselves. But, I just want to give you some hope.
In case, you want to see how this works, you can see the 2nd method. Other methods might work too. CHECK OUT THIS LINK.
Okay. Thanks for the reply......
sasukay said:
Yes you can revive your phone through QFIL. I had. Lenovo a6000 plus and in case of hard brick (when you can't access recovery or fastboot), you can still revive your phone through the Diagnostics port. You need to have a ROW firmware file in my case. I don't have a link for your device. You have to search that for yourselves. But, I just want to give you some hope.
In case, you want to see how this works, you can see the 2nd method. Other methods might work too. CHECK OUT THIS LINK.
Click to expand...
Click to collapse
And, and about the ROW Firmware that you mentioned, I came to know that ROW is mostly in the case of Lenovo mobiles, whereas in case of Moto E, I didn't find anything with ROW firmware.
But, I would like to know that the ROW Firmware that you mentioned, is it in .zip file format or something else?
MusaddiqueAli said:
And, and about the ROW Firmware that you mentioned, I came to know that ROW is mostly in the case of Lenovo mobiles, whereas in case of Moto E, I didn't find anything with ROW firmware.
But, I would like to know that the ROW Firmware that you mentioned, is it in .zip file format or something else?
Click to expand...
Click to collapse
For me the format was .row only. I checked google for it and it's not so for others I guess. I've scoured some links for you, which might help, I'm not sure though. Specially, the firmware files, I don't know if these are what you need. But, you can have a look and atleast try unbricking your device. Good luck!
1) MOTO FIRMWARE FILES
2) Tutorial 1 (I would prefer this).
3) Tutorial 2
Thnaks.
sasukay said:
For me the format was .row only. I checked google for it and it's not so for others I guess. I've scoured some links for you, which might help, I'm not sure though. Specially, the firmware files, I don't know if these are what you need. But, you can have a look and atleast try unbricking your device. Good luck!
1) MOTO FIRMWARE FILES
2) Tutorial 1 (I would prefer this).
3) Tutorial 2
Click to expand...
Click to collapse
:good: Thank you very much for the links. I'll try those files. Hope it works.
One thing I am confident about now after my recent research online and here in XDA is that, my phone can be unbricked (whether QFIL method or otherwise) however severe the problem is.
MusaddiqueAli said:
:good: Thank you very much for the links. I'll try those files. Hope it works.
One thing I am confident about now after my recent research online and here in XDA is that, my phone can be unbricked (whether QFIL method or otherwise) however severe the problem is.
Click to expand...
Click to collapse
Plz Let me know if you succeed..
Please help Me.... I'm having the same problem.. Anyone found out the solution?
Can qfil be used?
If qfil can be used, please give me link for the. MBN, rawprogram0.xml and patch file for moto e xt1022
FIX suggestion
If anyone has another working Moto E then we just need to extract the internal backup which can be used to unbrick our phones. I'm trying from past 2 weeks to find a user with working moto e but couldn't find one..
If found please contact me..
Thank you.
coder0000 said:
Moto E is not displaying anything..Notification light blink once when long press power button or while connecting to usb cable..
But my PC detects the phone when connected..Device Manager showing Qualcomm HS-USB QDLoader 9008 .
PLEASE HELP!!!
UPDATED:
I heard that by using QFIL,all qualcomm mobiles could be flashed without fastboot..
Is it possible for MOTO E?
Click to expand...
Click to collapse
Am also having similar kind of problems with my Moto E, apart from the notification light blink once when long press the power button. In my case, notification light is blinking only when connected to charger.
Waiting for your problems to be resolved [emoji41]
Sent from my Lenovo P2a42 using Tapatalk
coder0000 said:
Moto E is not displaying anything..Notification light blink once when long press power button or while connecting to usb cable..
But my PC detects the phone when connected..Device Manager showing Qualcomm HS-USB QDLoader 9008 .
PLEASE HELP!!!
UPDATED:
I heard that by using QFIL,all qualcomm mobiles could be flashed without fastboot..
Is it possible for MOTO E?
Click to expand...
Click to collapse
Mine was also the same case , Downgraded to KitKat from lollipop received an OTA and bang! I got bricked!
My device gets detected as QUALCOMM HS-QDLOADER 9008 in COM ports which is also known as EMERGENCY DOWNLOAD MODE. I have rescued many phones from this incl. Nokia Lumia Devices(9006 and 9008)through Care Suite, Xiaomi devices but their Firmware allows them to flash from Emergency Download Mode.
But Motorola Has only released the FASTBOOT FIRMWARE which doesnt provide the way to Load FW in EDL mode, blank-flash files are leaked for the Moto G which does the same thing! But Blank-Flash are not available for Moto E which can resue you from Emergency DL mode . I tried using different tools like QPST an all but no luck.
The Solution till now is through JTAG/ATF recovery only which writes the eMMC through JTAG interface and RESTORES THE BOOT. It needs a specialised HW and can be done by a Mobile Technician for a small amount. This is the only solution i found though it was 1 yr ago
Is there any way to recover LG H930 (V30). I tried to reset FRP but chose wrong model (V300L) using Octoplus FRP by mistake.
During FRP reset the phone switched to Qualcomm HS-USB Diagnostics 9002 and then the process failed.
Now no response on phone - black screen and nothing showing on device manager. I have the dump file saved from Octoplus FRP.
Any method to save phone?
I tried volume up + power buttons
Volume down + Power button
Both volume buttons + power but no response.
If you have any tips, please share.
I have managed to get phone back into Qualcomm HS-USB QDLoader 9008 by opening phone and removing battery and reinserting. Showing up in device manager now but still black screen. Still looking into it.
I managed to fix the phone using dump file created during FRP reset, thanks to help from Octoplus Team.
To repair your device do the following:
1. Select the model which you chose by mistake. In my case V300 instead of H930 in the list of Software.
2. Select backup file "Your dump file.dump" into the Firmware slot in Software. Should be saved in the Octoplus backup folder.
3. Press "Reset FRP (Qualcomm 9008)" button in Software and write back the backup file.
It is a rare situation but I hope it helps someone in the event they need it.
iMoGGG said:
I managed to fix the phone using dump file created during FRP reset, thanks to help from Octoplus Team.
To repair your device do the following:
1. Select the model which you chose by mistake. In my case V300 instead of H930 in the list of Software.
2. Select backup file "Your dump file.dump" into the Firmware slot in Software. Should be saved in the Octoplus backup folder.
3. Press "Reset FRP (Qualcomm 9008)" button in Software and write back the backup file.
It is a rare situation but I hope it helps someone in the event they need it.
Click to expand...
Click to collapse
I just ran into this situation on my LG V30 Plus 128G. H932. I have no idea how to do what you're suggesting but i found the Qualcomm HS-USB QDLoader 9008 (COM10) in my Win 10 device manager. I was also able to pull event history etc. Anyway i can provide something from that and have the file built for me? I'll very happily donate!!
iMoGGG said:
Is there any way to recover LG H930 (V30). I tried to reset FRP but chose wrong model (V300L) using Octoplus FRP by mistake.
During FRP reset the phone switched to Qualcomm HS-USB Diagnostics 9002 and then the process failed.
Now no response on phone - black screen and nothing showing on device manager. I have the dump file saved from Octoplus FRP.
Any method to save phone?
I tried volume up + power buttons
Volume down + Power button
Both volume buttons + power but no response.
If you have any tips, please share.
Click to expand...
Click to collapse
At least you got a dump...I bricked my V35 last night while it was dumping I think but not sure like MTK you might have to wait a few days it to charge not sure about LG. Anyway have your tried this one ? all the other one didn't work so when I tried this one it worked but I didn't know so I yanked the cable and tha's how I got mine bricked.
---------- Post added at 11:47 AM ---------- Previous post was at 11:36 AM ----------
KennynGGG said:
At least you got a dump...I bricked my V35 last night while it was dumping I think but not sure like MTK you might have to wait a few days it to charge not sure about LG. Anyway have your tried this one ? all the other one didn't work so when I tried this one it worked but I didn't know so I yanked the cable and tha's how I got mine bricked.
Click to expand...
Click to collapse
I don't think I can attach yet since I'm new here.
to fix qdloader you must use jtag to restore ant boot to download mode,
send it to any repair service .
it hapen to me and the jtag soleve the problem , my device is v300s.
seloka180 said:
to fix qdloader you must use jtag to restore ant boot to download mode,
send it to any repair service .
it hapen to me and the jtag soleve the problem , my device is v300s.
Click to expand...
Click to collapse
Thanks Seloka, unfortunately it's now bricked. it lefrt Qdloader mode then never powered on again
KennynGGG said:
Thanks Seloka, unfortunately it's now bricked. it lefrt Qdloader mode then never powered on again
Click to expand...
Click to collapse
Actually it does power on just can't see it...only when I plug it into my laptop will I know because of the sounds and Device Manager.
KennynGGG said:
Actually it does power on just can't see it...only when I plug it into my laptop will I know because of the sounds and Device Manager.
Click to expand...
Click to collapse
you must install Qualcomm driver to see your device in device manager as " Qualcomm qdloader 9008"
- but for now you can't do anything without jtag or box like Medusa or octopus.
Sent from my LGM-V300S using XDA Labs
---------- Post added at 07:42 PM ---------- Previous post was at 07:34 PM ----------
seloka180 said:
you must install Qualcomm driver to see your device in device manager as " Qualcomm qdloader 9008"
- but for now you can't do anything without jtag or box like Medusa or octopus.
Click to expand...
Click to collapse
edit :
I had the same problem and was fixed by "jtag" at a repair shop . but the wide camera not work now . it see camera not available.
Sent from my LGM-V300S using XDA Labs
seloka180 said:
you must install Qualcomm driver to see your device in device manager as " Qualcomm qdloader 9008"
- but for now you can't do anything without jtag or box like Medusa or octopus.
Sent from my LGM-V300S using XDA Labs
---------- Post added at 07:42 PM ---------- Previous post was at 07:34 PM ----------
edit :
I had the same problem and was fixed by "jtag" at a repair shop . but the wide camera not work now . it see camera not available.
Sent from my LGM-V300S using XDA Labs
Click to expand...
Click to collapse
Yeah I read about those. Wonder if there's any online service for I kinda of hesistate on mailing it out. Can you recommend any ?
KennynGGG said:
Yeah I read about those. Wonder if there's any online service for I kinda of hesistate on mailing it out. Can you recommend any ?
Click to expand...
Click to collapse
no I'm in algeria ?? sorry ?.
it's a local repair shop here in algeria.
Sent from my LGM-V300S using XDA Labs
iMoGGG said:
I managed to fix the phone using dump file created during FRP reset, thanks to help from Octoplus Team.
To repair your device do the following:
1. Select the model which you chose by mistake. In my case V300 instead of H930 in the list of Software.
2. Select backup file "Your dump file.dump" into the Firmware slot in Software. Should be saved in the Octoplus backup folder.
3. Press "Reset FRP (Qualcomm 9008)" button in Software and write back the backup file.
It is a rare situation but I hope it helps someone in the event they need it.
Click to expand...
Click to collapse
How did you get a dump ? I want to do the samething just in case...
https://www.ebay.com/itm/Remote-Ser...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649
I used his service personally for my Qualcomm 9008 US998_20H while crossflashing H930_30b as too impatient to wait for PIE. $37 with tax. Teamviewer used to remotely install drivers and software for JTAG writting using Octopus box remotely. Worked great. I highly recommend this guy, Tennolee
I was using my phone like normal when it froze on me. I shut down my phone as I usually do when it freezes using the Power off + Vol Down. After turning the phone off, it refused to turn back on again, the light indicator for charging also does not work anymore when plugging in the charger. I did a bit of research and found out that it is possibly bricked. The way they suggested to fix this issue is to flash the phone with the stock rom. So here are the things I've tried:
1. Using SP Flash Tool (not really sure how this one is supposed to work, it is asking me for a "Scatter Loading File" which to my knowledge, isn't part of the ROM file I downloaded from xiaomi.)
2. Booting into EDL mode by shorting the pins and Using the official Mi Flash Tool (This one barely worked for me, it got into the process of flashing but asked me for an authorized Mi Account, after a few hours of research I found out that you can't get one.)
3. Changing the original firehose file with the modified version to bypass the authentication (Still asked me to authenticate)
4. Other Flash Tools (Qualtek, MiracleBox, Qualcomm Flash tool, etc. All failed)
Not really sure what to do at this point, I am unable to launch into fastboot or recovery, phone is completely unresponsive. The only thing that is giving me hope is that the phone is detected in the device manager of my pc as Qualcomm HS-USB QDLoader 9008 (COM3). Is the phone dead or is it just bricked, all answers will be highly appreciated, Thanks in Advance
Take phone to authorized service center and let them try to fix it.
jwoegerbauer said:
Take phone to authorized service center and let them try to fix it.
Click to expand...
Click to collapse
Well it is kind of the only possible way because Xiaomi locked down the EDL mode and render a phone truly as useful as a brick, when bricked, unless you sign in with a authorized mi account. Also 99 percent of time the people online claiming that they can fix the device, it is a scam.
However Xiaomi store will probably not fix the phone (it is 3 years old) for the OP (original poster) and try to convince him to move on to new Xiaomi phones because, Xiaomi will earn more...
LR7875 said:
Well it is kind of the only possible way because Xiaomi locked down the EDL mode and render a phone truly as useful as a brick, when bricked, unless you sign in with a authorized mi account. Also 99 percent of time the people online claiming that they can fix the device, it is a scam.
However Xiaomi store will probably not fix the phone (it is 3 years old) for the OP (original poster) and try to convince him to move on to new Xiaomi phones because, Xiaomi will earn more...
Click to expand...
Click to collapse
would a motherboard replacement work?
vaizardsparagon said:
would a motherboard replacement work?
Click to expand...
Click to collapse
1000000 percent this will work because by replacing the motherboard, your corrupt data and chips (fried EMMC flash storage) (and snapped snapdragon) will be replaced.
Exactly same thing happened with my Poco F1 on 20th Aug. It comes up as Qualcomm HS-USB QDLoader 9008 (COM3) when connecting to my laptop.
What would be the cost for getting motherboard replaced? I want to be able to use my phone with minimal effect to its state before the issue happened. Want to avoid any resets.
chmohit25 said:
Exactly same thing happened with my Poco F1 on 20th Aug. It comes up as Qualcomm HS-USB QDLoader 9008 (COM3) when connecting to my laptop.
What would be the cost for getting motherboard replaced? I want to be able to use my phone with minimal effect to its state before the issue happened. Want to avoid any resets.
Click to expand...
Click to collapse
I'm afraid to say this but i think that your phone was stuck in EDL mode. here in my country the technicians offer remote EDL flash.. no success no payment transaction..