Hello,
so i own a umidigi f1, After trying some roms i wanted to use it's original one, so i downloaded the rom, ext...
but this time i did hit erase all in sp flash tools,
phone working fine, serial number is 1111111111111 and 222222222222, no problem too phone is doing great job.
the only problem is i got a red water mark saying TEE : NOT ACTIVATED/ GOOGLE : NOT ACTIVATED
TEE : Trusted Execution Environment
how can i get rid of it, i tried many roms after that, nothing could help.
I have a Ulefone Armor 9, and I did the same mistake, I have searched everywhere, but found nothing, I tried to re-flash the stock ROM, and still this red water mark showing up on the right corner of the screen.
I hope someone could help us on this.
Related
I came here after many days trying to fix this phone!
First, I don't know how to work with phones! It was looked due to "Too many tries to unlook it!" and was requesting to connect to one google account to unlook it.
The phone is a generic Spreadtrum SC6820 that has "i9300" writed on the space where the battery goes and its circuit board is marked with the writing L3035_MB_V2.2 and there one stick that reads L3035F-P9600-QUAD-2G-HY-V2.03.B05.
I was unable to find the stock firnware and did not know how to backup it using the ResearchDownload.exe tool available for the Spreadtrum, so I fallowed that very bad tutorial http://forum.xda-developers.com/showthread.php?t=2320640 and I ended with it bricked!
After that, I tried to flash all the roms I could find to see if any would work but all I managed to get is a phone with inverted color scheme, inverted touchscreen, no radio, no BT and no wifi!
If anyone here has the firnware compatible with this phone, please share it, Thanks.
i got the same problam my device has a inverted touchscreen after i flashed its rom using recherche download.please help
Dear All,
I hope someone can help me get out of the situation.
I am using this FEITENG HTM H9001 6 Inches China Phone.
It came rooted by the vendor.
It is a good and nice phone. And I like it alot.
After I install a "font changing" apps,
The phone auto shut off and restart and it stuck at the HTM logo.
So sad Sad.
I know I need to reflash the firmware.
So I did some search on line...............
After finally managed to install the USB's driver which I was not able for quite long....
I follow the instruction on youtube from this site.
Down loaded the flast tool - SP Flash Tool v3.1332.0.sn187
Go to needrom to get a HTM H9001 firmware.
It should be there "right firmware". Someone there on the page where i got the firmware for H9001 said that its stable after he flash it. So proceeded to download it. Safely assume its the correct rom.
Using the flashtool, I followed the flashing steps exactly untill the green sign appeared. I was looking forward to see it start again after the problem mentioned above...........
After pulling out the cables from my PC, I press the power/start button of the phone to check if its ok....BUT It did started but it only shows "whitish color screen"
I can't even see the usual green colour HTM logo when the phone was switched on but I can hear sound of the phone starting... it stays at the whitish screen. And when I touch certain part of the screen the phone seem to response...just that I cannot view the desktop and the icon.. perhaps the video driver was corrupted in some way...or could it be the wrong rom
I proceeded re-flash it again........
same result - white screen.... phone still response to " power switch when press the LCD goes off. and some responsive sounds when the blank screen is touhed...
I am here in hope for some luck in finding ways to recover my phone back to normal...
It all started from installing a font changing apps that corrupted the firmware...than perhaps my action may have complicate the situation further....
Please. Any help would be great.
Thanks so much in advance.
How can I make good back my Feiteng HTM H9001
Or did I got the wrong ROM ?
It did not stae Feiteng just H9001 .
The rom I downloaded for my phone is here for my Feitend HTM H9001.
Is this the correct rom for my phone ?
Appreciate , really needs help to get out from this problem.
I love this phone. I want to make it good again Smile
I will try to upload some image to show its current stae.
many Thanks in advance.
Desmond
So desperate..I uses this MTK Droid tools.
I turn the phone on and it detected the details on my phone.....
Is there any way to use other tools to get my phone back to working like before the "font changing apps" time .... it was working great just before with no problem at all.............
MTK droid can detec the details of my phone...........
BUT i am lost - any way to use Droid tools to save the situation ?
I attached some picture to share what I meant...
Hope some nice great guys can shed some lights so i can try to move ahead..currently really lost... newbies to android phone....
Many Thanks
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Repair HTM H9001
moneycow said:
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Click to expand...
Click to collapse
Hello friend,
if you want to recover your H9001 look this link:
movilesdualsim com htm6582
on the site will explain the steps to solve your problem.
To me it happened to me same thing that has happened to you.
And now I enjoy my H9001 more than ever.
regards
Hi guys, I have a problem with my iphone clone 5c, marked ALPS. After a misguided attempt to reset the phone from recovery, I found the phone locked. At that point, surfing the web I found a rom on NEEDROM, and I tried to flash it with flash tool, an operation that I repeated 2 times, but even if flash tool give me successful, when I try to turn on the phone, the screen remains completely black but you hear the sound of release. How do I proceed?
Thanks in advance to anyone who can help me
Hello after trying to use SPFLASH TOOL to flash my device because i had logo screen loop i end up formating everything and now my phone doesn't start but if i plug in to my computer i can hear the sound of plug in and out, i can still use spflash tool but i have black screen on my phone so i'm here asking for someone to help me find a way to fix this, do i have to build a new rom or system? Just tell me what to do because after Searching the whole internet after my phone i can't find much stuff.
Any help would be appreciated.
What phone model is it bro?
Sorry for not answering in time bro but i finally fixed my phone i had to reinstall like re-flash the entire phone.
My phone is a Qilive Q4 |7 auchan but i already fixed my problem i had trouble finding the stock rom for it since qilive aparently doesn't have any kind of support page but lucky that i found it.
Thanks anyway.
I'v got the global Note 9s Curtana and after getting the V11.0.9.0 i had an issue with the wifi, the device it self turns off the switch again and again. I have to tell you it's my first time with MIUI and i'm not a specialist of that, so after some trying to get a result i made my phone brick.
Now there is a red triangle on my screen with the "!" inside and in the bottom line says " The system has been destroyed".
I tryed to flash a ROM with MiFlash Tool but allways get an error.
I got a unlocked bootloader and i can reboot into fastboot.
Do anybody know a solution to help me?
johnsot said:
I'v got the global Note 9s Curtana and after getting the V11.0.9.0 i had an issue with the wifi, the device it self turns off the switch again and again. I have to tell you it's my first time with MIUI and i'm not a specialist of that, so after some trying to get a result i made my phone brick.
Now there is a red triangle on my screen with the "!" inside and in the bottom line says " The system has been destroyed".
I tryed to flash a ROM with MiFlash Tool but allways get an error.
I got a unlocked bootloader and i can reboot into fastboot.
Do anybody know a solution to help me?
Click to expand...
Click to collapse
What error did you get, perhaps drivers or windows 10 PC, try with a windows 7 if you have one
Sent from my U65GT using Tapatalk
try to rollback to 11.0.8 and in miflash dont use option to clean with bootloader , you can see my post here
https://forum.xda-developers.com/redmi-note-9-pro/how-to/tutorial-how-to-revert-to-official-t4109831
My problem has been solved, I finally made it and i flashed one fastboot rom and my phone is live again. I was really scared when i saw the message for the destroyed system.
Thanks you quoted on my post.