So i have my Moto G7 right here, and recently i tried to jailbreak it, which worked fine
i then tried to use Magisk to root, which resulted in an eternal bootloop
i tried to reflash stock onto it, still bootlooping
in feeble hope that the other boot slot had a boot partition that worked, i switched to slot B
now nothing is working, however, Windows detects the device, as "Qualcomm HS-USB QDLoader 9008 (COM4)"
how do i switch the boot slot back? ADB and Fastboot do not recognize the device, so DONT GIVE ME INTRUCTIONS FOR ADB OR FASTBOOT. just tell me how i swap bootslots without loading Fastboot
@CodeWritten
I think the device is unrecoverably bricked.
Would pulling the battery and lettings the cmos battery die not work then?
There has to be a way
CodeWritten said:
Would pulling the battery and lettings the cmos battery die not work then?
There has to be a way
Click to expand...
Click to collapse
What is the point of that? Forcibly emptying/cleaning the memory chip / CMOS chip does not help.
If you power on an Android device, the Bootloader ( comparable with BIOS/UEFI on computers ) gets startet which makes accessible the RAM-disk , loads the Linux kernel into RAM, and then starts the first process called init. This is also valid for A/B-ed Android systems.
To me it seems the Bootloader is broken because you obviously can't boot into Recovery.
According to a few things iv'e read, apparently if the device is recognized as it is now (Qualcomm HS-USB QDloader 9008) it is savable
EDIT: I need the .mbn file for Moto G7 XT1962-1
Related
Hi. I have a problem with my lenovo. I updated it by ota but the new sw was terrible so i wanted to back to previous. I backuped but many apps and chinese stuff. So i decided to full format, dalvik, chache, data, system and backup my previous sw everything by cwm. After that my phone olny vibrate. Adb devices doesn't see phone. But if I plug to the usb, pc shows me disc- stupid- but only i can format it (i did not do that), and after installed drivers shows it like Lenovo HS-USB Diagnostics 9006. All day i`m looking for files to flash tool but i cannot find. Stock and cmw not working. Pleas help.
up
http://forum.xda-developers.com/showthread.php?t=2461418
Yoy have cwm, drivers and an english rom there
Sent from my Nexus 4
I have the same
sonymanw said:
Hi. I have a problem with my lenovo. I updated it by ota but the new sw was terrible so i wanted to back to previous. I backuped but many apps and chinese stuff. So i decided to full format, dalvik, chache, data, system and backup my previous sw everything by cwm. After that my phone olny vibrate. Adb devices doesn't see phone. But if I plug to the usb, pc shows me disc- stupid- but only i can format it (i did not do that), and after installed drivers shows it like Lenovo HS-USB Diagnostics 9006. All day i`m looking for files to flash tool but i cannot find. Stock and cmw not working. Pleas help.
Click to expand...
Click to collapse
I think I removed the kernel with cmw and detects me a HS-USB QDLoader 9008 in Windows. Is there a way to connect the phone (with battery or without, eg) with some key (or key combination thereof) that entered the phone in fastboot mode? I do not see anything in adb devices and there is no bootloader - dark screen (battery ok).
wadli said:
I think I removed the kernel with cmw and detects me a HS-USB QDLoader 9008 in Windows. Is there a way to connect the phone (with battery or without, eg) with some key (or key combination thereof) that entered the phone in fastboot mode? I do not see anything in adb devices and there is no bootloader - dark screen (battery ok).
Click to expand...
Click to collapse
hey,
did you solve that?
gimmeluck2 said:
hey,
did you solve that?
Click to expand...
Click to collapse
no, i didn't
I have a thl knight 2, I tried to flash twrp and it's stuck in a bootloop. I can't connect trough adb, fastboot but I saw some ports in device manager. I downloaded mediatek drivers. As far as I know when I connect the phone it should be detected by the droid tools or sp flash tool but it isn't. All the drivers pop up, I tried setting them to mediatek DA USB VCOM (Android), Mediatek USB VCOM (android) and Mediatek PreLoader USB VCOM (Android) but still it doesn't find the phone. I can't use recovery and can't enter fastboot. My volume up key used to lower the volume instead so maybe they are both mapped to volume down? I have a orange state message on the android logo about not trusting my phone. It would have been better to just let the chinese government get my personal information than trying to mess with forces I don't comprehend! If anyone reads this and is willing to help me I will be forever in your debt.
Maybe if I brick it altogether I will have more chance than it just getting to the android logo.
maduri said:
Maybe if I brick it altogether I will have more chance than it just getting to the android logo.
Click to expand...
Click to collapse
Where did you get the mentioned twrp recovery?
I've got an old VirginMobile LG Optimus Elite (LGVM696) phone that won't boot, and I'm wondering if any data recovery is possible. The device itself isn't important, but I want to find out if I can recover photos.
When I plug the phone into a Windows PC, it shows up in the device manager as Qualcomm HS-USB QDLoader 9008 (COM3). ADB or fastboot don't recognize the device, on Windows or Ubuntu (not sure if I got everything installed correctly on Ubuntu, though).
If it's recognized as this QDLoader 9008, does that just mean it's toast, or is there some way to load a recovery image or something? Would that erase the internal storage?
I've found a lot of threads on here about this, but I don't know enough about Android to really figure it out. Not sure what everything means, like the difference between recovery and a custom recovery, download mode, fastboot, etc. I don't think I've found much for this particular phone, either.
I'm also seeing a lot of mentions of .dll, .tot, .kdz files. What are all those in regards to Android or LG specifically? I've found a .cab file that is supposedly the stock firmware for this phone.
i wanted flash my phone so i follow this guild on youtube.
/watch?v=naQX9Was6DY
after flashing it got red light. it was fine before. i try the vol down +power and volume up and down + power but nothing works.
the computer recognize it as "Qualcomm HS-USB Diagnostics 900E"
i manage to get it to display " Qualcomm HS-USB QDLoader 9008" but dont know how to proceed from here.
Specs Before Dead:
Miui 7.012
Android 5.6
32 Gb Rom,3 Gb Ram (kenzo)
update:
i end up fixing my phone. it was in EDL Mode. i had Flash Using DFC Cable or Xiaomi EDL Cable. i made one from an youtube video ( it was one with button i made, it allow to get get QDLoader 9008 with consistency and without removing the back cover.)
afterthat i just flash it miflash tool with "kenzo_global_images_8.11.22_20181122.0000.00_6.0_global " it had to be DEVELOPER VERSION thought. i dont know if i can do it a second time because it might be a flute that it was able to flash at all LOL. and this is the only phone i have and i dont want to use an Iphone7. one thing i dont like is it wont let me flash twrp or OrangeFox- ( it said it can not found file flash_all.bat) cause when went push vol up + power it just give me standard xiami menu.
when i have a compatible phone on the same cell network, i'll try to flashing a diff rom cause the xiami rom has lots of ads. .
Bluesaky said:
i wanted flash my phone so i follow this guild on youtube.
/watch?v=naQX9Was6DY
after flashing it got red light. it was fine before. i try the vol down +power and volume up and down + power but nothing works.
the computer recognize it as "Qualcomm HS-USB Diagnostics 900E"
i manage to get it to display " Qualcomm HS-USB QDLoader 9008" but dont know how to proceed from here.
Specs Before Dead:
Miui 7.012
Android 5.6
32 Gb Rom,3 Gb Ram (kenzo)
please help
Click to expand...
Click to collapse
I think you have locked your bootloader. Well if that is the case try flashing TWRP again it will solve your problem.
Refer to this tutorial https://www.youtube.com/watch?v=xExKvog5RP4
LoadOP2 said:
I think you have locked your bootloader. Well if that is the case try flashing TWRP again it will solve your problem.
Refer to this tutorial watch?v=xExKvog5RP4[/url]
Click to expand...
Click to collapse
from you tube
tried it, didnt work. it said flash success. but the phone will not power on. VOL up +power not working, vol down + power not working either
Bluesaky said:
i wanted flash my phone so i follow this guild on youtube.
/watch?v=naQX9Was6DY
after flashing it got red light. it was fine before. i try the vol down +power and volume up and down + power but nothing works.
the computer recognize it as "Qualcomm HS-USB Diagnostics 900E"
i manage to get it to display " Qualcomm HS-USB QDLoader 9008" but dont know how to proceed from here.
Specs Before Dead:
Miui 7.012
Android 5.6
32 Gb Rom,3 Gb Ram (kenzo)
please help
Click to expand...
Click to collapse
Are you able to boot your device into EDL mode? If not, try to boot into EDL using the test point method if default method doesn't work. If you're successful in booting up in EDL, Follow the below forum to recover the bootloader and recovery.
Link to the test point method tutorial: https://www.youtube.com/watch?v=_jv1ZVQ95Ng
Follow this after you enter the EDL mode successfully: https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778
Hey, I need Some help ASAP, I am in a Big trouble. So The whole scenario is that I decided to install the Paranoid Android 11 in my Mi A3 and After Unlocking the Bootloader, I changed the Boot Slot from A to B and Flashed the Twrp file ( to the boot ) and Pressed the Power and Volume down Button, The Phone turned off and is not turning on Not Even the Fastboot Logo, Its Bricked. (Here are some additional Points Which you Should Know, 1. I checked the ports on my Computer and It was Showing Qualcomm HS-USB QDLoader 9008 So I think the phone is in EDL mode. 2. I tried to Flash Mi A3 Stock Firmware using Miflash and It was Showing Error "Cannot receive hello Packet") The Phone is my Daily Driver and If anyone can, Please help me Fix this.
Even I got the same issue after downloading the latest Android 11, then got rectified the Mobile through the nearest service center.
Globally many people experienced the same issue.
Now it is ok !
use qfile and service rom
set up in ufs mod
plug off battery and connct usb with short test point
load files 0/1/2/3/4/5 and
elprfesor said:
use qfile and service rom
set up in ufs mod
plug off battery and connct usb with short test point
load files 0/1/2/3/4/5 and
Click to expand...
Click to collapse
could you explain it more?
I also dead briked my phone after install a11 and used qfil to flash some stuff in edl mode using test points,
I recommend using the right qualcomm driver 32 or 64 bits like your OS and also reboot after install driver,
I don't recommend open the back painel bcs even u doing it right it don't close well after bcs lose stickiness,
If u can just go to a service, they can manage with this better then u.
Same here. Even opened the back cover to touch the EDL points.
Tried getting out of that mode by flashing to stock ROM using the Mi Flash Tool as I'm getting a weird error, `Input string was not in the correct format`. even when using the very same input as I've seen on a YouTube Tutorial & I had also tried it out on the very same version of Flash Tool (and still got the error)